With the aim to effectively depolymerize polyethylene terephthalate(PET)under mild reaction conditions,PET methanolysis and dimethyl terephthalate(DMT)hydrolysis are integrated in a catalyst system.Firstly,methanolysi...With the aim to effectively depolymerize polyethylene terephthalate(PET)under mild reaction conditions,PET methanolysis and dimethyl terephthalate(DMT)hydrolysis are integrated in a catalyst system.Firstly,methanolysis of PET to DMT is achieved over Cu-Mg-Al oxide catalyst.Next,terephthalic acid(TPA)is prepared by DMT hydrolysis.It is found that hydrolysis of DMT to TPA can be promoted by introducing trace amount of water in this catalyst system.CuO-MgO-4.5Al_2O_(3)catalyst demonstrates the excellent catalytic performance for the depolymerization of PET with high conversion rate and TPA yield(100%and 99.5%,respectively)after reaction at 160℃for 6 h,which provides a new idea for the depolymerization of PET.展开更多
In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic ac...In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic acid)ligand.Mg_(2)Ti-ABTC exhibited permanent porosity for N_(2),CO_(2),CH_(4),C_(2)H_(2),C_(2)H_(4),and C_(2)H_(6)gas adsorption.Further-more,Mg_(2)Ti-ABTC exhibited outstanding photocatalytic activity in the oxidation of aromatic sulfides to the corre-sponding sulfoxides under ambient air conditions.Mechanism studies reveal that photoinduced holes(h^(+)),the super-oxide radical(·O_(2)^(-)),and singlet oxygen(^(1)O_(2))are pivotal species involved in the photocatalytic oxidation reaction.展开更多
Traditional selection of combustion catalysis is time-consuming and labor-intensive.Theoretical calculation is expected to resolve this problem.The adsorption energy of HMX and O atoms on 13 metal oxides was calculate...Traditional selection of combustion catalysis is time-consuming and labor-intensive.Theoretical calculation is expected to resolve this problem.The adsorption energy of HMX and O atoms on 13 metal oxides was calculated using DMol3,since HMX and O are key substances in decomposition process.And the relationship between the adsorption energy of HMX,O on metal oxides(TiO_(2),Al_(2)O_(3),PbO,CuO,Fe_(2)O_(3),Co_(3)O_(4),Bi_(2)O_(3),NiO)and experimental T30 values(time required for the decomposition depth of HMX to reach 30%)was depicted as volcano plot.Thus,the T30 values of other metal oxides was predicted based on their adsorption energy on volcano plot and validated by previous experimental data.Further,the adsorption energy of HMX on ZrO_(2)and MnO_(2)was predicted based on the linear relationship between surface energy and adsorption energy,and T30 values were estimated based on volcano plot.The apparent activation energy data of HMX/MgO,HMX/SnO_(2),HMX/ZrO_(2),and HMX/MnO_(2)obtained from DSC experiments are basically consistent with our predicted T30 values,indicating that it is feasible to predict the catalytic activity based on the adsorption calculation,and it is expected that these simple structural properties can predict adsorption energy to reduce the large quantities of computation and experiment cost.展开更多
Platinum(Pt)-based noble metal catalysts(PGMs)are the most widely used commercial catalysts,but they have the problems of high cost,low reserves,and susceptibility to small-molecule toxicity.Transition metal oxides(TM...Platinum(Pt)-based noble metal catalysts(PGMs)are the most widely used commercial catalysts,but they have the problems of high cost,low reserves,and susceptibility to small-molecule toxicity.Transition metal oxides(TMOs)are regarded as potential substitutes for PGMs because of their stability in oxidizing environments and excellent catalytic performance.In this study,comprehensive investigation into the influence of elastic strains on the adsorption energies of carbon(C),hydrogen(H)and oxygen(O)on TMOs was conducted.Based on density functional theory(DFT)calculations,these effects in both tetragonal structures(PtO_(2),PdO_(2))and hexagonal structures(ZnO,CdO),along with their respective transition metals were systematically explored.It was identified that the optimal adsorption sites on metal oxides pinpointed the top of oxygen or the top of metal atom,while face-centered cubic(FCC)and hexagonal close-packed(HCP)holes were preferred for the transition metals.Furthermore,under the influence of elastic strains,the results demonstrated significant disparities in the adsorption energies of H and O between oxides and transition metals.Despite these differences,the effect of elastic strains on the adsorption energies of C,H and O on TMOs mirrored those on transition metals:adsorption energies increased under compressive strains,indicating weaker adsorption,and decreased under tension strains,indicating stronger adsorption.This behavior was rationalized based on the d-band model for adsorption atop a metallic atom or the p-band model for adsorption atop an oxygen atom.Consequently,elastic strains present a promising avenue for tailoring the catalytic properties of TMOs.展开更多
As a main oxidizer in solid composite propellants,ammonium perchlorate(AP)plays an important role because its thermal decomposition behavior has a direct influence on the characteristic of solid composite propellants....As a main oxidizer in solid composite propellants,ammonium perchlorate(AP)plays an important role because its thermal decomposition behavior has a direct influence on the characteristic of solid composite propellants.To improve the performance of solid composite propellant,it is necessary to take measures to modify the thermal decomposition behavior of AP.In recent years,transition metal oxides and carbon-supported transition metal oxides have drawn considerable attention due to their extraordinary catalytic activity.In this review,we highlight strategies to enhance the thermal decomposition of AP by tuning morphology,varying the types of metal ion,and coupling with carbon analogue.The enhanced catalytic performance can be ascribed to synergistic effect,increased surface area,more exposed active sites,and accelerated electron transportation and so on.The mechanism of AP decomposition mixed with catalyst has also been briefly summarized.Finally,a conclusive outlook and possible research directions are suggested to address challenges such as lacking practical application in actual formulation of solid composite propellant and batch manufacturing.展开更多
Developing high-performance lithium ion batteries(LIBs)using manganese oxides as anodes is attractive due to their high theoretical capacity and abundant resources.Herein,we report a facile synthesis of hierarchical s...Developing high-performance lithium ion batteries(LIBs)using manganese oxides as anodes is attractive due to their high theoretical capacity and abundant resources.Herein,we report a facile synthesis of hierarchical spherical MnO2 containing coherent amorphous/crystalline domained by a simple yet effective redox precipitation reaction at room temperature.Further,flower-like CoMn2O4 constructed by single-crystalline spinel nanosheets has been fabricated using MnO2 as precursor.This mild methodology avoids undesired particle aggregation and loss of active surface area in conventional hydrothermal or solid-state processes.Moreover,both MnO2 and CoMn2O4 nanosheets manifest superior lithium-ion storage properties,rendering them promising applications in LIBs and other energy-related fields.展开更多
Fe-Al/Cr3C2 coatings were sprayed on low steel by high velocity arc spraying（HVAS） technology. The influences of oxides on erosion, corrosion and wear behavior for high velocity arc sprayed Fe-Al/Cr3C2 coatings were...Fe-Al/Cr3C2 coatings were sprayed on low steel by high velocity arc spraying（HVAS） technology. The influences of oxides on erosion, corrosion and wear behavior for high velocity arc sprayed Fe-Al/Cr3C2 coatings were studied. The results show that HVAS-sprayed Fe-Al/Cr3C2 coatings have good erosion, heat corrosion and wear resistance. The erosion resistance improves with the increase of the temperature. On one hand, the ferrous oxides are incompact, so they peel off the surface of the coatings easily during the high temperature erosion. On the other hand, compact Al2O3 films on the surface can protect the coatings.展开更多
Mesoporous cerium-zirconium mixed oxides were prepared by hydrothermal method using cetyl trimethyl ammonium bromide (CTAB) as template. The effects of amount of template, pH value of solution and hydrothermal tempera...Mesoporous cerium-zirconium mixed oxides were prepared by hydrothermal method using cetyl trimethyl ammonium bromide (CTAB) as template. The effects of amount of template, pH value of solution and hydrothermal temperature on mesostructure of samples were systematically investigated. The final products were characterized by XRD, TEM, FT-IR, and BET. The results indicate that all the cerium-zirconium mixed oxides present a meso-structure. At molar ratio of n(CTAB)/n((Ce)+(Zr))= 0.15, pH value of 9, and hydrothermal temperature of 120 ℃, the samples obtained possess a specific surface area of 207.9 m2/g with pore diameter of 3.70 nm and pore volume of 0.19 cm3/g.展开更多
The role of oxides in the formation of hole defects in friction stir welded joint of 2519-T87 aluminum alloy has been investigated by using optical microscope, scanning electron microscope, electron backscatter diffra...The role of oxides in the formation of hole defects in friction stir welded joint of 2519-T87 aluminum alloy has been investigated by using optical microscope, scanning electron microscope, electron backscatter diffraction and electron probe microanalyzer to examine the distribution of oxides and the features of hole defects, and using ABAQUS 3D thermo-mechanical coupling finite element model based on arbitrary Lagrangian-Eulerian method to simulate the material flow behavior. Oxides exist at the edge of tunnel hole and in the micropores in the joint. Based on distribution of oxygen and material flow behavior, it is believed that the oxides on the surface of the alloy tend to flow down into the bulk along the flow direction of plastic material during friction stir welding, aggregate in the weak region of material flow at the intersection of the shoulder affected zone and the stir pin-tip affected zone, and consequently prevent the material from contacting and diffusing. Due to the insufficient material flow and therefore the small plastic deformation,the pressure is not high enough to compress the accumulated oxides, resulting in hole defects.展开更多
Recent advances in the preparation and application of perovskite-type oxides as bifunctional electrocatalysts for oxygen reaction and oxygen evolution reaction in rechargeable metal-air batteries are presented in this...Recent advances in the preparation and application of perovskite-type oxides as bifunctional electrocatalysts for oxygen reaction and oxygen evolution reaction in rechargeable metal-air batteries are presented in this review.Various fabrication methods of these oxides are introduced in detail,and their advantages and disadvantages are analyzed.Different preparation methods adopted have great influence on the morphologies and physicochemical properties of perovskite-type oxides.As a bifunctional electrocatalyst,perovskite-type oxides are widely used in rechargeable metal-air batteries.The relationship between the preparation methods and the performances of oxygen/air electrodes are summarized.This work is concentrated on the structural stability,the phase compositions,and catalytic performance of perovskite-type oxides in oxygen/air electrodes.The main problems existing in the practical application of perovskite-type oxides as bifunctional electrocatalysts are pointed out and possible research directions in the future are recommended.展开更多
This article investigates the colloidal study for water and ethylene glycol based nanofluids.The effects of Lorentz forces and thermal radiation are considered.The process of non-dimensionalities of governing equation...This article investigates the colloidal study for water and ethylene glycol based nanofluids.The effects of Lorentz forces and thermal radiation are considered.The process of non-dimensionalities of governing equations is carried out successfully by means of similarity variables.Then,the resultant nonlinear nature of flow model is treated numerically via Runge-Kutta scheme.The characteristics of various pertinent flow parameters on the velocity,temperature,streamlines and isotherms are discussed graphically.It is inspected that the Lorentz forces favors the rotational velocity and rotational parameter opposes it.Intensification in the nanofluids temperature is observed for volumetric fraction and thermal radiation parameter and dominating trend is noted for γ-aluminum nanofluid.Furthermore,for higher rotational parameter,reverse flow is investigated.To provoke the validity of the present work,comparison between current and literature results is presented which shows an excellent agreement.It is examined that rotation favors the velocity of the fluid and more radiative fluid enhances the fluid temperature.Moreover,it is inspected that upturns in volumetric fraction improves the thermal and electrical conductivities.展开更多
The effects of alkali oxides （Na2O and K2O addition on both the sintering behavior and dielectric properties of Ca-AI-B-Si-O glass/Al2O3 composites were investigated by Fourier transform infrared spectroscopy （FTIR...The effects of alkali oxides （Na2O and K2O addition on both the sintering behavior and dielectric properties of Ca-AI-B-Si-O glass/Al2O3 composites were investigated by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimeter （DSC）, X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. The results show that the increasing amount of alkali oxides in the glass causes the decrease of [SiO4], which results in the decrease of the continuity of glass network, and leads to the decrease of the softening temperature Tf of the samples and the increasing trend of crystallization. And that deduces corresponding rise of densification, dielectric constant, dielectric loss of the low temperature co-fired ceramic （LTCC） materials and the decrease of its thermal conductivity. By contrast, the borosilicate glass/A1203 composites with 1.5% （mass fraction） alkali oxides sintered at 875 ℃ for 30 rain exhibit better properties of a bulk density of 2.79 g/cm3, a porosity of 0.48%, a 2 value of 2.28 W/（m.K）, a er value of 7.82 and a tand value of 9.1 × 10-4 （measured at 10 MHz）.展开更多
An investigation of hydrotalcite-derived ternary Mg-Al-Ce oxides as catalysts for vapour phase condensation of ethanol to 1-butanol in a flow reactor under atmospheric pressure was carried out.The Mg-Al-Ce oxide syste...An investigation of hydrotalcite-derived ternary Mg-Al-Ce oxides as catalysts for vapour phase condensation of ethanol to 1-butanol in a flow reactor under atmospheric pressure was carried out.The Mg-Al-Ce oxide systems with Mg/(Al+Ce)ratio from 1 to 4 were synthesized and characterized by XRD,SEM,NMR,and XPS.The study of acid-base characteristics of the systems with different Mg/(Al+Ce)ratio by NH3/CO_(2)quasi-equilibrium thermal desorption techniques shows that the ratio of the catalyst oxide components(Mg,Al,Ce)can provide acid/base capacity ratio close to 3 for the effectivity of the target process.The highest selectivity 68%is reached over Mg-Al-Ce oxide catalyst with the ratio of Mg/(Al+Ce)=2.展开更多
With sol-gel method,nanometer La-Ti composite oxides were prepared.By means of atomic force microscope,the surface pattern,particle size distribution and specific surface area were studied.The newly prepared nanocryst...With sol-gel method,nanometer La-Ti composite oxides were prepared.By means of atomic force microscope,the surface pattern,particle size distribution and specific surface area were studied.The newly prepared nanocrystals of La-Ti composite oxides were used as the catalysts to catalyze the dehydration of external compensated lactic acid to lactide.The lactide product was measured by polarimeter and micropolariscope.The results demonstrate that the ratio between D-lactide and L-lactide will not be equal to 1-1 if nanocrystals of La-Ti composite oxides are used as the catalysts,which implies,that nanocrystals of La-Ti composite oxides may be potential catalysts with a good selectivity.展开更多
Iron oxides and lead-zinc deposits in host rocks located in ten drainage basins in the coastal plain of the Red Sea,Egypt,have been subjected to important mining activities.The drainage basins were analyzed to estimat...Iron oxides and lead-zinc deposits in host rocks located in ten drainage basins in the coastal plain of the Red Sea,Egypt,have been subjected to important mining activities.The drainage basins were analyzed to estimate the transportations of these minerals. Fourteen soil samples and fifteen plant samples were collected from sites located in the basin and also in neighboring area and chemically analyzed.In展开更多
The pyrochlore supergroup natural minerals are the oxides for formula A2-xB2O7. In this formula, A typically is Ca, Na, TR, Ba, Fe and Mn cation. B is Ta, Ti, Nb, W, Sb. The pyrochlore supergroup is divided into five ...The pyrochlore supergroup natural minerals are the oxides for formula A2-xB2O7. In this formula, A typically is Ca, Na, TR, Ba, Fe and Mn cation. B is Ta, Ti, Nb, W, Sb. The pyrochlore supergroup is divided into five groups basis of the atomic proportions of the B-site atoms Nb, Ta, Sb, Ti, and W. They are pyrochlore, microlite, roméite, betafite, and elsmoreite, respectively. Some of these minerals containing rare-earth elements species or synthetic oxides have important applications in materials, as for optical materials, light catalyst materials, magnetoelectric materials and radioactive waste treatment etc.展开更多
A new type of saddle field ion gun has been developed in our laboratories, and it can emit ions and a large proportion of energetic neutrals.The ion gun has been used in the neutral and ion impact radiation （NIIR） s...A new type of saddle field ion gun has been developed in our laboratories, and it can emit ions and a large proportion of energetic neutrals.The ion gun has been used in the neutral and ion impact radiation （NIIR） spectrometer to decrease the effect of charge accumulation on the surfaces of specimens. Some metals, including aluminium, copper and nickel and their oxides had been analysed by NIIR. By comparing the intensities of the spectral lines of the above metals and their oxides the intensification effect due to oxidation had been found. The ratio of intensities between Al I（3962（?）） for Al<sub>2</sub>O<sub>3</sub> and Al I （3962（?）） for Al is 120, so the effect can be seen clearly from the above experimental results. The mechanism of the intensification effect has been discussed in the paper.展开更多
Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen wa...Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen was reduced to 2.47 wt%from 40.02 wt%.The oxygen content in the final powder was eventually reduced to an extremely low level(0.055 wt%)using calcium at 900℃ in argon,and the final powder had the composition of 90.12 wt%Ti,5.57 wt%Al,and 3.87 wt%V,which meets the standard specification of Ti-6Al-4V(ASTM F1108-09).Between the two reductions,a heat treatment step was designed to help controlling the specific surface area and particle size.The effect of the heat treatment temperature on the morphology,and composition uniformity of the powder was investigated in detail.Heat treatment above 1300℃ attributed to a dense powder with a controlled specific surface area.Thermodynamic modeling and experimental results indicated that onlyα-Ti enriched with Al andβ-Ti enriched with V exist in the final powder,and other possible phases including Al-Mg and Al-V were excluded.This study also offers a triple-step thermochemical process for producing high-purity Ti-based alloy powder.展开更多
A series of alumina supported cobalt oxide based catalysts doped with noble metals such as ruthenium and platinum were prepared by wet impregnation method.The variables studied were difference ratio and calcination te...A series of alumina supported cobalt oxide based catalysts doped with noble metals such as ruthenium and platinum were prepared by wet impregnation method.The variables studied were difference ratio and calcination temperatures.Pt/Co(10∶90)/Al2O3 catalyst calcined at 700 ℃ was found to be the best catalyst which able to convert 70.10% of CO2 into methane with 47% of CH4 formation at maximum temperature studied of 400 ℃.X-ray diffraction analysis showed that this catalyst possessed the active site Co3O4 in face-centered cubic and PtO2 in the orthorhombic phase with Al2O3 existed in the cubic phase.According to the FESEM micrographs,both fresh and spent Pt/Co(10∶90)/Al2O3 catalysts displayed small particle size with undefined shape.Nitrogen Adsorption analysis showed that 5.50% reduction of the total surface area for the spent Pt/Co(10∶90)/Al2O3 catalyst.Meanwhile,Energy Dispersive X-ray analysis(EDX) indicated that Co and Pt were reduced by 0.74% and 0.14% respectively on the spent Pt/Co(10∶90)/Al2O3catalyst.Characterization using FT-IR and TGA-DTA analysis revealed the existence of residual nitrate and hydroxyl compounds on the Pt/Co(10∶90)/Al2O3 catalyst.展开更多
A series of spinel Li-Mn-Ni composite oxides with theoretical chemical formula of LiNixMn2-xO4 （0〈_x〈_1.0） were synthesized by liquid phase method. Their structure and morphology were characterized by X-ray diffra...A series of spinel Li-Mn-Ni composite oxides with theoretical chemical formula of LiNixMn2-xO4 （0〈_x〈_1.0） were synthesized by liquid phase method. Their structure and morphology were characterized by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）, respectively. The stability of these Ni-substituted spinel oxides prepared at different temperatures was investigated in acidic medium as well. The results show that Ni can be brought into the spinel framework completely to form well-crystallized product when x〈_0.5 and the optimized synthesis temperature is 800℃. LiNi0.4Mn1.6O4 prepared at 800℃ can maintain the spinel structure and morphology with Li extraction ratio of 30.37%, Mn extraction ratio of 8.78% and Ni extraction ratio of 1,82% during acid treatment. The incorporated Ni not only inhibits the dissolution of Mn, but also reduces the extraction of Li due to the lattice contraction展开更多
文摘With the aim to effectively depolymerize polyethylene terephthalate(PET)under mild reaction conditions,PET methanolysis and dimethyl terephthalate(DMT)hydrolysis are integrated in a catalyst system.Firstly,methanolysis of PET to DMT is achieved over Cu-Mg-Al oxide catalyst.Next,terephthalic acid(TPA)is prepared by DMT hydrolysis.It is found that hydrolysis of DMT to TPA can be promoted by introducing trace amount of water in this catalyst system.CuO-MgO-4.5Al_2O_(3)catalyst demonstrates the excellent catalytic performance for the depolymerization of PET with high conversion rate and TPA yield(100%and 99.5%,respectively)after reaction at 160℃for 6 h,which provides a new idea for the depolymerization of PET.
文摘In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic acid)ligand.Mg_(2)Ti-ABTC exhibited permanent porosity for N_(2),CO_(2),CH_(4),C_(2)H_(2),C_(2)H_(4),and C_(2)H_(6)gas adsorption.Further-more,Mg_(2)Ti-ABTC exhibited outstanding photocatalytic activity in the oxidation of aromatic sulfides to the corre-sponding sulfoxides under ambient air conditions.Mechanism studies reveal that photoinduced holes(h^(+)),the super-oxide radical(·O_(2)^(-)),and singlet oxygen(^(1)O_(2))are pivotal species involved in the photocatalytic oxidation reaction.
基金supported by Key Science and Technology Innovation Team of Shaanxi Province(No.2022TD-33)National Natural Science Foundation of China(Grant Nos.21373161,21504067)。
文摘Traditional selection of combustion catalysis is time-consuming and labor-intensive.Theoretical calculation is expected to resolve this problem.The adsorption energy of HMX and O atoms on 13 metal oxides was calculated using DMol3,since HMX and O are key substances in decomposition process.And the relationship between the adsorption energy of HMX,O on metal oxides(TiO_(2),Al_(2)O_(3),PbO,CuO,Fe_(2)O_(3),Co_(3)O_(4),Bi_(2)O_(3),NiO)and experimental T30 values(time required for the decomposition depth of HMX to reach 30%)was depicted as volcano plot.Thus,the T30 values of other metal oxides was predicted based on their adsorption energy on volcano plot and validated by previous experimental data.Further,the adsorption energy of HMX on ZrO_(2)and MnO_(2)was predicted based on the linear relationship between surface energy and adsorption energy,and T30 values were estimated based on volcano plot.The apparent activation energy data of HMX/MgO,HMX/SnO_(2),HMX/ZrO_(2),and HMX/MnO_(2)obtained from DSC experiments are basically consistent with our predicted T30 values,indicating that it is feasible to predict the catalytic activity based on the adsorption calculation,and it is expected that these simple structural properties can predict adsorption energy to reduce the large quantities of computation and experiment cost.
基金Science and Technology Commission of Shanghai Municipality(21ZR1472900,22ZR1471600)。
文摘Platinum(Pt)-based noble metal catalysts(PGMs)are the most widely used commercial catalysts,but they have the problems of high cost,low reserves,and susceptibility to small-molecule toxicity.Transition metal oxides(TMOs)are regarded as potential substitutes for PGMs because of their stability in oxidizing environments and excellent catalytic performance.In this study,comprehensive investigation into the influence of elastic strains on the adsorption energies of carbon(C),hydrogen(H)and oxygen(O)on TMOs was conducted.Based on density functional theory(DFT)calculations,these effects in both tetragonal structures(PtO_(2),PdO_(2))and hexagonal structures(ZnO,CdO),along with their respective transition metals were systematically explored.It was identified that the optimal adsorption sites on metal oxides pinpointed the top of oxygen or the top of metal atom,while face-centered cubic(FCC)and hexagonal close-packed(HCP)holes were preferred for the transition metals.Furthermore,under the influence of elastic strains,the results demonstrated significant disparities in the adsorption energies of H and O between oxides and transition metals.Despite these differences,the effect of elastic strains on the adsorption energies of C,H and O on TMOs mirrored those on transition metals:adsorption energies increased under compressive strains,indicating weaker adsorption,and decreased under tension strains,indicating stronger adsorption.This behavior was rationalized based on the d-band model for adsorption atop a metallic atom or the p-band model for adsorption atop an oxygen atom.Consequently,elastic strains present a promising avenue for tailoring the catalytic properties of TMOs.
基金This work was financially supported by the Science and Technology project of Jiangsu province(BN2015021,XZ-SZ201819).
文摘As a main oxidizer in solid composite propellants,ammonium perchlorate(AP)plays an important role because its thermal decomposition behavior has a direct influence on the characteristic of solid composite propellants.To improve the performance of solid composite propellant,it is necessary to take measures to modify the thermal decomposition behavior of AP.In recent years,transition metal oxides and carbon-supported transition metal oxides have drawn considerable attention due to their extraordinary catalytic activity.In this review,we highlight strategies to enhance the thermal decomposition of AP by tuning morphology,varying the types of metal ion,and coupling with carbon analogue.The enhanced catalytic performance can be ascribed to synergistic effect,increased surface area,more exposed active sites,and accelerated electron transportation and so on.The mechanism of AP decomposition mixed with catalyst has also been briefly summarized.Finally,a conclusive outlook and possible research directions are suggested to address challenges such as lacking practical application in actual formulation of solid composite propellant and batch manufacturing.
基金Project(JCYJ20170817110251498)supported by the Basic Research Project of the Science and Technology Innovation Commission of Shenzhen,ChinaProject(2016TQ03C919)supported by the Guangdong Special Support for the Science and Technology Leading Young Scientist,ChinaProject(21603094)supported by the National Natural Science Foundation of China
文摘Developing high-performance lithium ion batteries(LIBs)using manganese oxides as anodes is attractive due to their high theoretical capacity and abundant resources.Herein,we report a facile synthesis of hierarchical spherical MnO2 containing coherent amorphous/crystalline domained by a simple yet effective redox precipitation reaction at room temperature.Further,flower-like CoMn2O4 constructed by single-crystalline spinel nanosheets has been fabricated using MnO2 as precursor.This mild methodology avoids undesired particle aggregation and loss of active surface area in conventional hydrothermal or solid-state processes.Moreover,both MnO2 and CoMn2O4 nanosheets manifest superior lithium-ion storage properties,rendering them promising applications in LIBs and other energy-related fields.
文摘Fe-Al/Cr3C2 coatings were sprayed on low steel by high velocity arc spraying（HVAS） technology. The influences of oxides on erosion, corrosion and wear behavior for high velocity arc sprayed Fe-Al/Cr3C2 coatings were studied. The results show that HVAS-sprayed Fe-Al/Cr3C2 coatings have good erosion, heat corrosion and wear resistance. The erosion resistance improves with the increase of the temperature. On one hand, the ferrous oxides are incompact, so they peel off the surface of the coatings easily during the high temperature erosion. On the other hand, compact Al2O3 films on the surface can protect the coatings.
基金Project(CHCL0501) supported by Hubei Provincial Open Fund of Key Laboratory of Catalytic Material Science and Technology
文摘Mesoporous cerium-zirconium mixed oxides were prepared by hydrothermal method using cetyl trimethyl ammonium bromide (CTAB) as template. The effects of amount of template, pH value of solution and hydrothermal temperature on mesostructure of samples were systematically investigated. The final products were characterized by XRD, TEM, FT-IR, and BET. The results indicate that all the cerium-zirconium mixed oxides present a meso-structure. At molar ratio of n(CTAB)/n((Ce)+(Zr))= 0.15, pH value of 9, and hydrothermal temperature of 120 ℃, the samples obtained possess a specific surface area of 207.9 m2/g with pore diameter of 3.70 nm and pore volume of 0.19 cm3/g.
文摘The role of oxides in the formation of hole defects in friction stir welded joint of 2519-T87 aluminum alloy has been investigated by using optical microscope, scanning electron microscope, electron backscatter diffraction and electron probe microanalyzer to examine the distribution of oxides and the features of hole defects, and using ABAQUS 3D thermo-mechanical coupling finite element model based on arbitrary Lagrangian-Eulerian method to simulate the material flow behavior. Oxides exist at the edge of tunnel hole and in the micropores in the joint. Based on distribution of oxygen and material flow behavior, it is believed that the oxides on the surface of the alloy tend to flow down into the bulk along the flow direction of plastic material during friction stir welding, aggregate in the weak region of material flow at the intersection of the shoulder affected zone and the stir pin-tip affected zone, and consequently prevent the material from contacting and diffusing. Due to the insufficient material flow and therefore the small plastic deformation,the pressure is not high enough to compress the accumulated oxides, resulting in hole defects.
基金Projects(51504212,21573184,51703061)supported by the National Natural Science Foundation of ChinaProject(2018J01521)supported by the Natural Science Foundation of Fujian Province,ChinaProject(fma2017202)supported by the Open Fund of Fujian Provincial Key Laboratory of Functional Materials and Applications(Xiamen University of Technology),China
文摘Recent advances in the preparation and application of perovskite-type oxides as bifunctional electrocatalysts for oxygen reaction and oxygen evolution reaction in rechargeable metal-air batteries are presented in this review.Various fabrication methods of these oxides are introduced in detail,and their advantages and disadvantages are analyzed.Different preparation methods adopted have great influence on the morphologies and physicochemical properties of perovskite-type oxides.As a bifunctional electrocatalyst,perovskite-type oxides are widely used in rechargeable metal-air batteries.The relationship between the preparation methods and the performances of oxygen/air electrodes are summarized.This work is concentrated on the structural stability,the phase compositions,and catalytic performance of perovskite-type oxides in oxygen/air electrodes.The main problems existing in the practical application of perovskite-type oxides as bifunctional electrocatalysts are pointed out and possible research directions in the future are recommended.
文摘This article investigates the colloidal study for water and ethylene glycol based nanofluids.The effects of Lorentz forces and thermal radiation are considered.The process of non-dimensionalities of governing equations is carried out successfully by means of similarity variables.Then,the resultant nonlinear nature of flow model is treated numerically via Runge-Kutta scheme.The characteristics of various pertinent flow parameters on the velocity,temperature,streamlines and isotherms are discussed graphically.It is inspected that the Lorentz forces favors the rotational velocity and rotational parameter opposes it.Intensification in the nanofluids temperature is observed for volumetric fraction and thermal radiation parameter and dominating trend is noted for γ-aluminum nanofluid.Furthermore,for higher rotational parameter,reverse flow is investigated.To provoke the validity of the present work,comparison between current and literature results is presented which shows an excellent agreement.It is examined that rotation favors the velocity of the fluid and more radiative fluid enhances the fluid temperature.Moreover,it is inspected that upturns in volumetric fraction improves the thermal and electrical conductivities.
基金Project(2007AA03Z0455) supported by the National High Technology Research and Development Program ("863" Program) of ChinaProject(BE2010194) supported by Science & Technology Pillar Program of Jiangsu in China+3 种基金Project(BE2009168) supported by Science & Technology Pillar Program of Jiangsu in ChinaProject supported by the Priority Academic Program Development (PAPD) of Jiangsu Higher Education InstitutionsProject(KF201103) supported by State Key Laboratory of New Ceramic and Fine Processing Tsinghua UniversityProject(CXZZ12_0415) supported by Innovation Foundation for Graduate Students of Jiangsu Province,China
文摘The effects of alkali oxides （Na2O and K2O addition on both the sintering behavior and dielectric properties of Ca-AI-B-Si-O glass/Al2O3 composites were investigated by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimeter （DSC）, X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. The results show that the increasing amount of alkali oxides in the glass causes the decrease of [SiO4], which results in the decrease of the continuity of glass network, and leads to the decrease of the softening temperature Tf of the samples and the increasing trend of crystallization. And that deduces corresponding rise of densification, dielectric constant, dielectric loss of the low temperature co-fired ceramic （LTCC） materials and the decrease of its thermal conductivity. By contrast, the borosilicate glass/A1203 composites with 1.5% （mass fraction） alkali oxides sintered at 875 ℃ for 30 rain exhibit better properties of a bulk density of 2.79 g/cm3, a porosity of 0.48%, a 2 value of 2.28 W/（m.K）, a er value of 7.82 and a tand value of 9.1 × 10-4 （measured at 10 MHz）.
基金the Program of National Academy of Sciences of Ukraine KPKVK 6541230“Support for the development of priority areas of scientific research”(0120U101212).
文摘An investigation of hydrotalcite-derived ternary Mg-Al-Ce oxides as catalysts for vapour phase condensation of ethanol to 1-butanol in a flow reactor under atmospheric pressure was carried out.The Mg-Al-Ce oxide systems with Mg/(Al+Ce)ratio from 1 to 4 were synthesized and characterized by XRD,SEM,NMR,and XPS.The study of acid-base characteristics of the systems with different Mg/(Al+Ce)ratio by NH3/CO_(2)quasi-equilibrium thermal desorption techniques shows that the ratio of the catalyst oxide components(Mg,Al,Ce)can provide acid/base capacity ratio close to 3 for the effectivity of the target process.The highest selectivity 68%is reached over Mg-Al-Ce oxide catalyst with the ratio of Mg/(Al+Ce)=2.
基金Project(50174059)supported by the National Natural Science Foundation of ChinaProject(Y406469)supported by Natural Science Foundation of Zhejiang Province
文摘With sol-gel method,nanometer La-Ti composite oxides were prepared.By means of atomic force microscope,the surface pattern,particle size distribution and specific surface area were studied.The newly prepared nanocrystals of La-Ti composite oxides were used as the catalysts to catalyze the dehydration of external compensated lactic acid to lactide.The lactide product was measured by polarimeter and micropolariscope.The results demonstrate that the ratio between D-lactide and L-lactide will not be equal to 1-1 if nanocrystals of La-Ti composite oxides are used as the catalysts,which implies,that nanocrystals of La-Ti composite oxides may be potential catalysts with a good selectivity.
文摘Iron oxides and lead-zinc deposits in host rocks located in ten drainage basins in the coastal plain of the Red Sea,Egypt,have been subjected to important mining activities.The drainage basins were analyzed to estimate the transportations of these minerals. Fourteen soil samples and fifteen plant samples were collected from sites located in the basin and also in neighboring area and chemically analyzed.In
基金Supported by National Natural Science Foundation of China (Grant No. 41172052)
文摘The pyrochlore supergroup natural minerals are the oxides for formula A2-xB2O7. In this formula, A typically is Ca, Na, TR, Ba, Fe and Mn cation. B is Ta, Ti, Nb, W, Sb. The pyrochlore supergroup is divided into five groups basis of the atomic proportions of the B-site atoms Nb, Ta, Sb, Ti, and W. They are pyrochlore, microlite, roméite, betafite, and elsmoreite, respectively. Some of these minerals containing rare-earth elements species or synthetic oxides have important applications in materials, as for optical materials, light catalyst materials, magnetoelectric materials and radioactive waste treatment etc.
文摘A new type of saddle field ion gun has been developed in our laboratories, and it can emit ions and a large proportion of energetic neutrals.The ion gun has been used in the neutral and ion impact radiation （NIIR） spectrometer to decrease the effect of charge accumulation on the surfaces of specimens. Some metals, including aluminium, copper and nickel and their oxides had been analysed by NIIR. By comparing the intensities of the spectral lines of the above metals and their oxides the intensification effect due to oxidation had been found. The ratio of intensities between Al I（3962（?）） for Al<sub>2</sub>O<sub>3</sub> and Al I （3962（?）） for Al is 120, so the effect can be seen clearly from the above experimental results. The mechanism of the intensification effect has been discussed in the paper.
基金Project(52004342) supported by the National Natural Science Foundation of ChinaProject(150240015) supported by the Innovation-Driven Project of Central South University,ChinaProject(2021JJ20065) supported by the Natural Science Fund for Outstanding Young Scholar of Hunan Province,China。
文摘Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen was reduced to 2.47 wt%from 40.02 wt%.The oxygen content in the final powder was eventually reduced to an extremely low level(0.055 wt%)using calcium at 900℃ in argon,and the final powder had the composition of 90.12 wt%Ti,5.57 wt%Al,and 3.87 wt%V,which meets the standard specification of Ti-6Al-4V(ASTM F1108-09).Between the two reductions,a heat treatment step was designed to help controlling the specific surface area and particle size.The effect of the heat treatment temperature on the morphology,and composition uniformity of the powder was investigated in detail.Heat treatment above 1300℃ attributed to a dense powder with a controlled specific surface area.Thermodynamic modeling and experimental results indicated that onlyα-Ti enriched with Al andβ-Ti enriched with V exist in the final powder,and other possible phases including Al-Mg and Al-V were excluded.This study also offers a triple-step thermochemical process for producing high-purity Ti-based alloy powder.
文摘A series of alumina supported cobalt oxide based catalysts doped with noble metals such as ruthenium and platinum were prepared by wet impregnation method.The variables studied were difference ratio and calcination temperatures.Pt/Co(10∶90)/Al2O3 catalyst calcined at 700 ℃ was found to be the best catalyst which able to convert 70.10% of CO2 into methane with 47% of CH4 formation at maximum temperature studied of 400 ℃.X-ray diffraction analysis showed that this catalyst possessed the active site Co3O4 in face-centered cubic and PtO2 in the orthorhombic phase with Al2O3 existed in the cubic phase.According to the FESEM micrographs,both fresh and spent Pt/Co(10∶90)/Al2O3 catalysts displayed small particle size with undefined shape.Nitrogen Adsorption analysis showed that 5.50% reduction of the total surface area for the spent Pt/Co(10∶90)/Al2O3 catalyst.Meanwhile,Energy Dispersive X-ray analysis(EDX) indicated that Co and Pt were reduced by 0.74% and 0.14% respectively on the spent Pt/Co(10∶90)/Al2O3catalyst.Characterization using FT-IR and TGA-DTA analysis revealed the existence of residual nitrate and hydroxyl compounds on the Pt/Co(10∶90)/Al2O3 catalyst.
基金Project(2008BAB35B04) supported by the National Key Technology R&D Program of ChinaProject(CX2010B111) supported by the Innovation Program of Doctoral Research of Hunan Province, ChinaProject(2010QZZD003) supported by Advanced Research Program of Central South University, China
文摘A series of spinel Li-Mn-Ni composite oxides with theoretical chemical formula of LiNixMn2-xO4 （0〈_x〈_1.0） were synthesized by liquid phase method. Their structure and morphology were characterized by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）, respectively. The stability of these Ni-substituted spinel oxides prepared at different temperatures was investigated in acidic medium as well. The results show that Ni can be brought into the spinel framework completely to form well-crystallized product when x〈_0.5 and the optimized synthesis temperature is 800℃. LiNi0.4Mn1.6O4 prepared at 800℃ can maintain the spinel structure and morphology with Li extraction ratio of 30.37%, Mn extraction ratio of 8.78% and Ni extraction ratio of 1,82% during acid treatment. The incorporated Ni not only inhibits the dissolution of Mn, but also reduces the extraction of Li due to the lattice contraction
