Bismuth-doped tin dioxide nanometer powders were prepared by co-precipitation method using SnCl4 and Bi（NO3）3 as raw materials. The effects of calcining temperature and doping ratio on the particle size, composition...Bismuth-doped tin dioxide nanometer powders were prepared by co-precipitation method using SnCl4 and Bi（NO3）3 as raw materials. The effects of calcining temperature and doping ratio on the particle size, composition, spectrum selectivity of bismuth-doped tin dioxide and the phase transition of Bi-Sn precursor at different temperatures were studied by means of X-ray diffraction, transmission electron microscopy, ultraviolet-visual-near infrared diffuse reflection spectrum and the thermogravimetric-differential scanning calorimetry. The results show that prepared bismuth-doped tin dioxide powders have excellent characteristics with a single-phase tetragonal structure, good dispersibility, good absorbency for ultraviolet ray and average particle size less than 10 nm. The optimum conditions for preparing bismuth-doped tin dioxide nanometer powders are as follows: calcining temperature of 600℃, ratio of bismuth-doped in a range of 0.10-0.30, and Bi-Sn precursor being dispersed by ultrasonic wave and refluxed azeotropic and distillated with mixture of n-butanol and benzene. The mechanism of phase transition of Bi-Sn precursor is that Bi 3+ enters Sn-vacancy and then forms Sn—O—Bi bond.展开更多
Nanometer α-Fe2O3 catalysts were prepared by hydrolyzation in high temperature. Three kinds of precipitators, NaOH, （NH4）2CO3 and urea were used to compare the effect in the process of hydrolyzation. Nanometer size...Nanometer α-Fe2O3 catalysts were prepared by hydrolyzation in high temperature. Three kinds of precipitators, NaOH, （NH4）2CO3 and urea were used to compare the effect in the process of hydrolyzation. Nanometer sizer, transmission electron microscopy （TEM） and X-ray diffraction （XRD） were employed to test the profiles and diameters of the product particles. The test results indicate that the production is nanometer α-Fe2O3 with narrow particle size distribution （PSD） and good dispersibility. The catalysts are mixed with ammonia perchlorate （AP） in 1.0 wt.%. And the composite particles of catalysts with AP are prepared using a new solvent-nonsolvent method. Differential thermal analyzer （DTA） is employed to analysis the thermal decomposition of the composite particles and pure AP sample. The results imply that the thermal decomposition curve peaks of the samples in which nanometer α-Fe2O3 catalysts are added appear comparatively more ahead than that of pure AP sample. Among these mixtures added nanometer material, the smaller the particle diameter of catalyst is, the more ahead the thermal decomposition curve peaks of AP appear. The high and low temperature thermal decomposition curve peaks of AP mixed with the catalyst deposed by urea are more ahead of 77.8?℃ and 9.7?℃ than that of pure AP, respectively. The mechanism of the catalyst deposed by urea with smaller diameter and the distinct catalysis of the particles on the thermal decomposition of AP are discussed.展开更多
Ammonium aluminum carbonate hydroxide (AACH) precursor was synthesized by the precipitation reaction of aluminum sulfate and ammonium carbonate. Then the precursor was dealt with five drying methods including ordinary...Ammonium aluminum carbonate hydroxide (AACH) precursor was synthesized by the precipitation reaction of aluminum sulfate and ammonium carbonate. Then the precursor was dealt with five drying methods including ordinary drying, alcohol exchange, vacuum freeze-drying, glycol distillation, n-butanol azeotropic distillation respectively and calcined at 1 200 ℃ for 2 h to get α-Al2O3. The effects of drying methods on preparation of nanometer α-Al2O3 were discussed, and the optimal drying method was confirmed. The structural properties of powders were characterized by XRD, SEM and BET measurements. The results show that vacuum freeze-drying, glycol distillation and n-butanol azeotropic distillation can prevent the powders from aggregating, and among them the n-butanol azeotropic distillation is the best method. The nanometer α-Al2O3 powder with non-aggregation can be manufactured using n-butanol azeotropic distillation and the average particle size is about 40 nm.展开更多
Nanometer zinc oxide was prepared by solid phase reaction. And the ultraviolet visible spectral properties of nanometer zinc oxide colloidal solution dispersed in both water and oil phases were studied. The results sh...Nanometer zinc oxide was prepared by solid phase reaction. And the ultraviolet visible spectral properties of nanometer zinc oxide colloidal solution dispersed in both water and oil phases were studied. The results show that the absorbance of the colloidal solution to ultraviolet light increases with the decrease of wavelength and reaches about 2.5 at the wavelength of 200 nm. When the mass fraction of nanometer zinc oxide becomes lower, the transmittance of the colloidal solution to visible light gets higher, and it is much higher than that of normal zinc oxide under the same conditions, indicating that nanometer zinc oxide dispersed in both water and oil phases has high transmittance to visible light and good shield to ultraviolet light. Therefore it is suitable for the replacement of organic ultraviolet absorber and titanium dioxide in cosmetics.展开更多
In 1823,Thomas Seebeck first discovered the thermoelectric effect.A temperature difference across any electric conductor junction will generate a corresponding voltage difference.Probably the most familiar use of this...In 1823,Thomas Seebeck first discovered the thermoelectric effect.A temperature difference across any electric conductor junction will generate a corresponding voltage difference.Probably the most familiar use of this so called Seebeck effect is thermocouple.When an electric current passing through junction which is composed of two dissimilar conductors results in the absorption or release of the heat,this is the Peltier effect.This effect makes thermoelectric refrigerator or heating devices possible.Moreover a power generator can be also invented from the application of thermoelectric materials.Thermoelectric materials are those which possess high thermoelectric figure of merit.The major problem for thermoelectric materials is poor efficiency.They are now used only in the fields in which cost is not a big problem such as space and some other instruments.Thermoelectric materials are not widely used nowadays.展开更多
Nanocrystalline Fe-doped TiO2 with size of 6070 nm was prepared by a sol-gel technique, followed by freeze-drying treatment for 2 h. Thermogravimetric and differential thermal analyses, X-ray diffraction, scanning （e...Nanocrystalline Fe-doped TiO2 with size of 6070 nm was prepared by a sol-gel technique, followed by freeze-drying treatment for 2 h. Thermogravimetric and differential thermal analyses, X-ray diffraction, scanning （electron） microscope, laser diffraction particle size analyzer and UV-Vis spectrophotometer technologies were used to characterize the product. The photocatalytic activities of the samples were evaluated by the degradation of wastewater of paper-making. The effects of Fe ion implantation on the photocatalytic activity of TiO2 were also discussed. The results show that the iron content plays an essential role in affecting the photocatalytic activity of the Fe-doped TiO2 and the optimum content of Fe-doped is 0.05% （mass fraction）. The photocatalytic activity of samples with lower content of Fe-doped is higher than that of pure TiO2 in the treatment of paper-making wastewater. The photo-degradation effect of paper-making effluent is the best by means of Fe-doped TiO2 with 0.05% Fe.展开更多
The control synthesis of nanoparticles was the implementation process of material ideal design. Nano-hydroxyapatite(HAP) was prepared by a hydrothermal method with calcium nitrate and diammonium hydrogen phosphate as ...The control synthesis of nanoparticles was the implementation process of material ideal design. Nano-hydroxyapatite(HAP) was prepared by a hydrothermal method with calcium nitrate and diammonium hydrogen phosphate as raw material, to study its characteristics for morphology modification by arginine-functionalization and doping with rare earth such as Tb^(3+). The crystallization, grain size and dispersibility of the sample HAP were analyzed and discussed. The results show that the surface Zeta potential of arginine-functionalized HAP is changed, and the growth rate of HAP is inhibited to a certain extent during the synthesis. The structure of HAP/Arg is not affected during the synthesis by a small amount of rare earth ions doped such as Tb^(3+), and has a single phase of HAP with good dispersibility. The synthesized HAP is also of nano-sized level. Nano-hydroxyapatite argininefunctionalized and doped with rare earth such as Tb^(3+), is suitable for the application of gene delivery as a gene carrier.展开更多
基金Project(GC200603) supported by the Open Fund of Guangdong Provincial Key Laboratory for Green Chemicals projectsupported by the Key Laboratory of Enhanced Heat Transfer and Energy Conservation of Ministry of Education of China
文摘Bismuth-doped tin dioxide nanometer powders were prepared by co-precipitation method using SnCl4 and Bi（NO3）3 as raw materials. The effects of calcining temperature and doping ratio on the particle size, composition, spectrum selectivity of bismuth-doped tin dioxide and the phase transition of Bi-Sn precursor at different temperatures were studied by means of X-ray diffraction, transmission electron microscopy, ultraviolet-visual-near infrared diffuse reflection spectrum and the thermogravimetric-differential scanning calorimetry. The results show that prepared bismuth-doped tin dioxide powders have excellent characteristics with a single-phase tetragonal structure, good dispersibility, good absorbency for ultraviolet ray and average particle size less than 10 nm. The optimum conditions for preparing bismuth-doped tin dioxide nanometer powders are as follows: calcining temperature of 600℃, ratio of bismuth-doped in a range of 0.10-0.30, and Bi-Sn precursor being dispersed by ultrasonic wave and refluxed azeotropic and distillated with mixture of n-butanol and benzene. The mechanism of phase transition of Bi-Sn precursor is that Bi 3+ enters Sn-vacancy and then forms Sn—O—Bi bond.
文摘Nanometer α-Fe2O3 catalysts were prepared by hydrolyzation in high temperature. Three kinds of precipitators, NaOH, （NH4）2CO3 and urea were used to compare the effect in the process of hydrolyzation. Nanometer sizer, transmission electron microscopy （TEM） and X-ray diffraction （XRD） were employed to test the profiles and diameters of the product particles. The test results indicate that the production is nanometer α-Fe2O3 with narrow particle size distribution （PSD） and good dispersibility. The catalysts are mixed with ammonia perchlorate （AP） in 1.0 wt.%. And the composite particles of catalysts with AP are prepared using a new solvent-nonsolvent method. Differential thermal analyzer （DTA） is employed to analysis the thermal decomposition of the composite particles and pure AP sample. The results imply that the thermal decomposition curve peaks of the samples in which nanometer α-Fe2O3 catalysts are added appear comparatively more ahead than that of pure AP sample. Among these mixtures added nanometer material, the smaller the particle diameter of catalyst is, the more ahead the thermal decomposition curve peaks of AP appear. The high and low temperature thermal decomposition curve peaks of AP mixed with the catalyst deposed by urea are more ahead of 77.8?℃ and 9.7?℃ than that of pure AP, respectively. The mechanism of the catalyst deposed by urea with smaller diameter and the distinct catalysis of the particles on the thermal decomposition of AP are discussed.
基金Project (5JJ30103) supported by the Natural Science Foundation of Hunan Province, China
文摘Ammonium aluminum carbonate hydroxide (AACH) precursor was synthesized by the precipitation reaction of aluminum sulfate and ammonium carbonate. Then the precursor was dealt with five drying methods including ordinary drying, alcohol exchange, vacuum freeze-drying, glycol distillation, n-butanol azeotropic distillation respectively and calcined at 1 200 ℃ for 2 h to get α-Al2O3. The effects of drying methods on preparation of nanometer α-Al2O3 were discussed, and the optimal drying method was confirmed. The structural properties of powders were characterized by XRD, SEM and BET measurements. The results show that vacuum freeze-drying, glycol distillation and n-butanol azeotropic distillation can prevent the powders from aggregating, and among them the n-butanol azeotropic distillation is the best method. The nanometer α-Al2O3 powder with non-aggregation can be manufactured using n-butanol azeotropic distillation and the average particle size is about 40 nm.
文摘Nanometer zinc oxide was prepared by solid phase reaction. And the ultraviolet visible spectral properties of nanometer zinc oxide colloidal solution dispersed in both water and oil phases were studied. The results show that the absorbance of the colloidal solution to ultraviolet light increases with the decrease of wavelength and reaches about 2.5 at the wavelength of 200 nm. When the mass fraction of nanometer zinc oxide becomes lower, the transmittance of the colloidal solution to visible light gets higher, and it is much higher than that of normal zinc oxide under the same conditions, indicating that nanometer zinc oxide dispersed in both water and oil phases has high transmittance to visible light and good shield to ultraviolet light. Therefore it is suitable for the replacement of organic ultraviolet absorber and titanium dioxide in cosmetics.
文摘In 1823,Thomas Seebeck first discovered the thermoelectric effect.A temperature difference across any electric conductor junction will generate a corresponding voltage difference.Probably the most familiar use of this so called Seebeck effect is thermocouple.When an electric current passing through junction which is composed of two dissimilar conductors results in the absorption or release of the heat,this is the Peltier effect.This effect makes thermoelectric refrigerator or heating devices possible.Moreover a power generator can be also invented from the application of thermoelectric materials.Thermoelectric materials are those which possess high thermoelectric figure of merit.The major problem for thermoelectric materials is poor efficiency.They are now used only in the fields in which cost is not a big problem such as space and some other instruments.Thermoelectric materials are not widely used nowadays.
文摘Nanocrystalline Fe-doped TiO2 with size of 6070 nm was prepared by a sol-gel technique, followed by freeze-drying treatment for 2 h. Thermogravimetric and differential thermal analyses, X-ray diffraction, scanning （electron） microscope, laser diffraction particle size analyzer and UV-Vis spectrophotometer technologies were used to characterize the product. The photocatalytic activities of the samples were evaluated by the degradation of wastewater of paper-making. The effects of Fe ion implantation on the photocatalytic activity of TiO2 were also discussed. The results show that the iron content plays an essential role in affecting the photocatalytic activity of the Fe-doped TiO2 and the optimum content of Fe-doped is 0.05% （mass fraction）. The photocatalytic activity of samples with lower content of Fe-doped is higher than that of pure TiO2 in the treatment of paper-making wastewater. The photo-degradation effect of paper-making effluent is the best by means of Fe-doped TiO2 with 0.05% Fe.
基金Project(2013SK2024)supported by the Key Projects in Social Development Pillar Program of Hunan Province,ChinaProject(20130162120094)supported by Specialized Research Fund for the Doctoral Program of Higher Education(SRFDP),Ministry of Education,ChinaProject supported by State Key Laboratory of Powder Metallurgy,Central South University,China
文摘The control synthesis of nanoparticles was the implementation process of material ideal design. Nano-hydroxyapatite(HAP) was prepared by a hydrothermal method with calcium nitrate and diammonium hydrogen phosphate as raw material, to study its characteristics for morphology modification by arginine-functionalization and doping with rare earth such as Tb^(3+). The crystallization, grain size and dispersibility of the sample HAP were analyzed and discussed. The results show that the surface Zeta potential of arginine-functionalized HAP is changed, and the growth rate of HAP is inhibited to a certain extent during the synthesis. The structure of HAP/Arg is not affected during the synthesis by a small amount of rare earth ions doped such as Tb^(3+), and has a single phase of HAP with good dispersibility. The synthesized HAP is also of nano-sized level. Nano-hydroxyapatite argininefunctionalized and doped with rare earth such as Tb^(3+), is suitable for the application of gene delivery as a gene carrier.
