It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be...It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be solved.A method of 3D structural color turning on periodic metasurfaces fabricated by the microlens array and self-assembly technology was proposed in this study.In the experiment,Polydimethylsiloxane(PDMS)flexible film was used as a substrate,and SiO2 microspheres were scraped into grooves of the PDMS film to form 3D photonic crystal structures.By adjusting the number of blade-coated times and microsphere concentrations,high-saturation structural color micropatterns were obtained.These films were then matched with microlens arrays to produce dynamic graphics with iridescent effects.The results showed that by blade-coated two times and SiO2 microsphere concentrations of 50%are the best conditions.This method demonstrates the potential for being widely applied in the anticounterfeiting printing and ultra-high-resolution display.展开更多
The morphological description of wear particles in lubricating oil is crucial for wear state monitoring and fault diagnosis in aero-engines.Accurately and comprehensively acquiring three-dimensional(3D)morphological d...The morphological description of wear particles in lubricating oil is crucial for wear state monitoring and fault diagnosis in aero-engines.Accurately and comprehensively acquiring three-dimensional(3D)morphological data of these particles has became a key focus in wear debris analysis.Herein,we develop a novel multi-view polarization-sensitive optical coherence tomography(PS-OCT)method to achieve accurate 3D morphology detection and reconstruction of aero-engine lubricant wear particles,effectively resolving occlusion-induced information loss while enabling material-specific characterization.The particle morphology is captured by multi-view imaging,followed by filtering,sharpening,and contour recognition.The method integrates advanced registration algorithms with Poisson reconstruction to generate high-precision 3D models.This approach not only provides accurate 3D morphological reconstruction but also mitigates information loss caused by particle occlusion,ensuring model completeness.Furthermore,by collecting polarization characteristics of typical metals and their oxides in aero-engine lubricants,this work comprehensively characterizes and comparatively analyzes particle polarization properties using Stokes vectors,polarization uniformity,and cumulative phase retardation,and obtains a three-dimensional model containing polarization information.Ultimately,the proposed method enables multidimensional information acquisition for the reliable identification of abrasive particle types.展开更多
Drone swarm systems,equipped with photoelectric imaging and intelligent target perception,are essential for reconnaissance and strike missions in complex and high-risk environments.They excel in information sharing,an...Drone swarm systems,equipped with photoelectric imaging and intelligent target perception,are essential for reconnaissance and strike missions in complex and high-risk environments.They excel in information sharing,anti-jamming capabilities,and combat performance,making them critical for future warfare.However,varied perspectives in collaborative combat scenarios pose challenges to object detection,hindering traditional detection algorithms and reducing accuracy.Limited angle-prior data and sparse samples further complicate detection.This paper presents the Multi-View Collaborative Detection System,which tackles the challenges of multi-view object detection in collaborative combat scenarios.The system is designed to enhance multi-view image generation and detection algorithms,thereby improving the accuracy and efficiency of object detection across varying perspectives.First,an observation model for three-dimensional targets through line-of-sight angle transformation is constructed,and a multi-view image generation algorithm based on the Pix2Pix network is designed.For object detection,YOLOX is utilized,and a deep feature extraction network,BA-RepCSPDarknet,is developed to address challenges related to small target scale and feature extraction challenges.Additionally,a feature fusion network NS-PAFPN is developed to mitigate the issue of deep feature map information loss in UAV images.A visual attention module(BAM)is employed to manage appearance differences under varying angles,while a feature mapping module(DFM)prevents fine-grained feature loss.These advancements lead to the development of BA-YOLOX,a multi-view object detection network model suitable for drone platforms,enhancing accuracy and effectively targeting small objects.展开更多
Display devices have significantly changed our daily life for decades,from the watches,television,to the laptop and smartphone.As the desire of advanced display device with high-resolution,long operation life and ligh...Display devices have significantly changed our daily life for decades,from the watches,television,to the laptop and smartphone.As the desire of advanced display device with high-resolution,long operation life and lightweight properties,several display techniques have been demonstrated.There are mainly four types of electronic display device:cathode ray tube(CRT),liquid-crystal display(LCD),organic light-emitting diode(OLED),and micro-LED.Due to the different working principles and device structures,each type of display device has its special characteristic properties.The performance of devices could be adjusted through the material selection or device design.With careful device structure regulation,not only the efficiency but also the stability would be improved.Herein,a brief review of innovative strategies towards the structure design is presented.展开更多
Electrophoretic display(EPD) technology has become one of the main supporting pillars of the electronic paper display industry.Despite its benefits,the EPD technology suffers from several disadvantages such as non-fix...Electrophoretic display(EPD) technology has become one of the main supporting pillars of the electronic paper display industry.Despite its benefits,the EPD technology suffers from several disadvantages such as non-fixed threshold voltage value for gray scale display.In addition,the display has to repeatedly refresh between white and black states to eliminate ghost image when it needs to update a new image.The traditional driving waveform for the EPD includes four stages: erasing the original image,resetting to black state,clearing to white state,and writing a new image.A flicker can be found when transferring between two adjacent stages.A new driving waveform based on the improvement of activation pattern is proposed to weaken the ghost image and reduce the flicker.Experimental results show that the proposed driving waveform could weaken the ghost image effectively and reduce the number of flickers by 50%.Compared with the traditional driving waveform,the driving waveform of this work has a better performance.展开更多
Color inconsistency between views is an important problem to be solved in multi-view video systems. A multi-view video color correction method using dynamic programming is proposed. Three-dimensional histograms are co...Color inconsistency between views is an important problem to be solved in multi-view video systems. A multi-view video color correction method using dynamic programming is proposed. Three-dimensional histograms are constructed with sequential conditional probability in HSI color space. Then, dynamic programming is used to seek the best color mapping relation with the minimum cost path between target image histogram and source image histogram. Finally, video tracking technique is performed to correct multi-view video. Experimental results show that the proposed method can obtain better subjective and objective performance in color correction.展开更多
A novel group decision-making （GDM） method based on intuitionistic fuzzy sets （IFSs） is developed to evaluate the ergonomics of aircraft cockpit display and control system （ACDCS）. The GDM process with four step...A novel group decision-making （GDM） method based on intuitionistic fuzzy sets （IFSs） is developed to evaluate the ergonomics of aircraft cockpit display and control system （ACDCS）. The GDM process with four steps is discussed. Firstly, approaches are proposed to transform four types of common judgement representations into a unified expression by the form of the IFS, and the features of unifications are analyzed. Then, the aggregation operator called the IFSs weighted averaging （IFSWA） operator is taken to synthesize decision-makers’ （DMs’） preferences by the form of the IFS. In this operator, the DM’s reliability weights factors are determined based on the distance measure between their preferences. Finally, an improved score function is used to rank alternatives and to get the best one. An illustrative example proves the proposed method is effective to valuate the ergonomics of the ACDCS.展开更多
The variable block-size motion estimation(ME) and disparity estimation(DE) are adopted in multi-view video coding(MVC) to achieve high coding efficiency. However, much higher computational complexity is also introduce...The variable block-size motion estimation(ME) and disparity estimation(DE) are adopted in multi-view video coding(MVC) to achieve high coding efficiency. However, much higher computational complexity is also introduced in coding system, which hinders practical application of MVC. An efficient fast mode decision method using mode complexity is proposed to reduce the computational complexity. In the proposed method, mode complexity is firstly computed by using the spatial, temporal and inter-view correlation between the current macroblock(MB) and its neighboring MBs. Based on the observation that direct mode is highly possible to be the optimal mode, mode complexity is always checked in advance whether it is below a predefined threshold for providing an efficient early termination opportunity. If this early termination condition is not met, three mode types for the MBs are classified according to the value of mode complexity, i.e., simple mode, medium mode and complex mode, to speed up the encoding process by reducing the number of the variable block modes required to be checked. Furthermore, for simple and medium mode region, the rate distortion(RD) cost of mode 16×16 in the temporal prediction direction is compared with that of the disparity prediction direction, to determine in advance whether the optimal prediction direction is in the temporal prediction direction or not, for skipping unnecessary disparity estimation. Experimental results show that the proposed method is able to significantly reduce the computational load by 78.79% and the total bit rate by 0.07% on average, while only incurring a negligible loss of PSNR(about 0.04 d B on average), compared with the full mode decision(FMD) in the reference software of MVC.展开更多
In multi-view image localization task,the features of the images captured from different views should be fused properly.This paper considers the classification-based image localization problem.We propose the relationa...In multi-view image localization task,the features of the images captured from different views should be fused properly.This paper considers the classification-based image localization problem.We propose the relational graph location network(RGLN)to perform this task.In this network,we propose a heterogeneous graph construction approach for graph classification tasks,which aims to describe the location in a more appropriate way,thereby improving the expression ability of the location representation module.Experiments show that the expression ability of the proposed graph construction approach outperforms the compared methods by a large margin.In addition,the proposed localization method outperforms the compared localization methods by around 1.7%in terms of meter-level accuracy.展开更多
Multi-view laser radar （ladar） data registration in obscure environments is an important research field of obscured target detection from air to ground. There are few overlap regions of the observational data in dif...Multi-view laser radar （ladar） data registration in obscure environments is an important research field of obscured target detection from air to ground. There are few overlap regions of the observational data in different views because of the occluder, so the multi-view data registration is rather difficult. Through indepth analyses of the typical methods and problems, it is obtained that the sequence registration is more appropriate, but needs to improve the registration accuracy. On this basis, a multi-view data registration algorithm based on aggregating the adjacent frames, which are already registered, is proposed. It increases the overlap region between the pending registration frames by aggregation and further improves the registration accuracy. The experiment results show that the proposed algorithm can effectively register the multi-view ladar data in the obscure environment, and it also has a greater robustness and a higher registration accuracy compared with the sequence registration under the condition of equivalent operating efficiency.展开更多
Goose parvovirus(GPV)can cause a highly contagious and fatal gosling plague(GP)disease in goslings and muscoy ducklings.Here,three goose-origin neutralizing single chain variable fragment(scFv)antibodies against GPV S...Goose parvovirus(GPV)can cause a highly contagious and fatal gosling plague(GP)disease in goslings and muscoy ducklings.Here,three goose-origin neutralizing single chain variable fragment(scFv)antibodies against GPV SYG-61 were isolated.The genes of scFv antibodies were derived from goslings immunized with GPV SYG-61,and scFvs were subcloned into a pBSD vector for the construction of pBSD-scFv libraries.The pBSD-scFv libraries were screened following three rounds using VP2(protective antigen of GPV)as the bait by flow cytometry(FCM).After screening,the 15 clones with high mean fluorescence intensity(MFI)were isolated and sequenced.These 15 scFvs were expressed by pET-28a(+)in E.coli.The specificity and affinity of the 15 purified scFvs were successfully confirmed by ELISA.In the preliminary neutralization experiment on primary goose embryo fibroblast(GEF)in vitro,three of the 15 purified scFvs(named scFv-10,scFv-11 and scFv-50)showed significant neutralizing capacities.The study generated the first goose-origin neutralizing scFv against GPV and laid the foundation for the appearance of full-length goose-origin neutralizing monoclonal antibody against GPV.展开更多
TiO2 particles coated with polystyrene which were prepared via in situ polymerization and oil green dye were dispersed in tetrachloroethylene and xylene, the mixture came to be electrophoretic ink and was encapsulated...TiO2 particles coated with polystyrene which were prepared via in situ polymerization and oil green dye were dispersed in tetrachloroethylene and xylene, the mixture came to be electrophoretic ink and was encapsulated in to microcapsules by complex coacervation from gelatin and a hydrolyzed copolymer of styrene and maleic anhydride（SMA）. It was demonstrated that the membranes of the microcapsules were formed from nano sized coacervate droplets resulting from gelation and hydrolyzed SMA, which leads to a compact membrane structure. Microcapsules were characterized in terms of microstructure, morphologies by scanning electron microscopy（SEM）. Electrophoretic display prototype was prepared by coating electrophoretic ink microcapsules slurry on ITO glass with nearly single layer and sealed by UV curable adhesives. The characters “Zheda” in Chinese was firstly displayed at a low volt 9 V D.C..展开更多
文摘It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be solved.A method of 3D structural color turning on periodic metasurfaces fabricated by the microlens array and self-assembly technology was proposed in this study.In the experiment,Polydimethylsiloxane(PDMS)flexible film was used as a substrate,and SiO2 microspheres were scraped into grooves of the PDMS film to form 3D photonic crystal structures.By adjusting the number of blade-coated times and microsphere concentrations,high-saturation structural color micropatterns were obtained.These films were then matched with microlens arrays to produce dynamic graphics with iridescent effects.The results showed that by blade-coated two times and SiO2 microsphere concentrations of 50%are the best conditions.This method demonstrates the potential for being widely applied in the anticounterfeiting printing and ultra-high-resolution display.
文摘The morphological description of wear particles in lubricating oil is crucial for wear state monitoring and fault diagnosis in aero-engines.Accurately and comprehensively acquiring three-dimensional(3D)morphological data of these particles has became a key focus in wear debris analysis.Herein,we develop a novel multi-view polarization-sensitive optical coherence tomography(PS-OCT)method to achieve accurate 3D morphology detection and reconstruction of aero-engine lubricant wear particles,effectively resolving occlusion-induced information loss while enabling material-specific characterization.The particle morphology is captured by multi-view imaging,followed by filtering,sharpening,and contour recognition.The method integrates advanced registration algorithms with Poisson reconstruction to generate high-precision 3D models.This approach not only provides accurate 3D morphological reconstruction but also mitigates information loss caused by particle occlusion,ensuring model completeness.Furthermore,by collecting polarization characteristics of typical metals and their oxides in aero-engine lubricants,this work comprehensively characterizes and comparatively analyzes particle polarization properties using Stokes vectors,polarization uniformity,and cumulative phase retardation,and obtains a three-dimensional model containing polarization information.Ultimately,the proposed method enables multidimensional information acquisition for the reliable identification of abrasive particle types.
基金supported by the Natural Science Foundation of China,Grant No.62103052.
文摘Drone swarm systems,equipped with photoelectric imaging and intelligent target perception,are essential for reconnaissance and strike missions in complex and high-risk environments.They excel in information sharing,anti-jamming capabilities,and combat performance,making them critical for future warfare.However,varied perspectives in collaborative combat scenarios pose challenges to object detection,hindering traditional detection algorithms and reducing accuracy.Limited angle-prior data and sparse samples further complicate detection.This paper presents the Multi-View Collaborative Detection System,which tackles the challenges of multi-view object detection in collaborative combat scenarios.The system is designed to enhance multi-view image generation and detection algorithms,thereby improving the accuracy and efficiency of object detection across varying perspectives.First,an observation model for three-dimensional targets through line-of-sight angle transformation is constructed,and a multi-view image generation algorithm based on the Pix2Pix network is designed.For object detection,YOLOX is utilized,and a deep feature extraction network,BA-RepCSPDarknet,is developed to address challenges related to small target scale and feature extraction challenges.Additionally,a feature fusion network NS-PAFPN is developed to mitigate the issue of deep feature map information loss in UAV images.A visual attention module(BAM)is employed to manage appearance differences under varying angles,while a feature mapping module(DFM)prevents fine-grained feature loss.These advancements lead to the development of BA-YOLOX,a multi-view object detection network model suitable for drone platforms,enhancing accuracy and effectively targeting small objects.
基金Projects(71572028,71872027)supported by the National Natural Science Foundation of China。
文摘Display devices have significantly changed our daily life for decades,from the watches,television,to the laptop and smartphone.As the desire of advanced display device with high-resolution,long operation life and lightweight properties,several display techniques have been demonstrated.There are mainly four types of electronic display device:cathode ray tube(CRT),liquid-crystal display(LCD),organic light-emitting diode(OLED),and micro-LED.Due to the different working principles and device structures,each type of display device has its special characteristic properties.The performance of devices could be adjusted through the material selection or device design.With careful device structure regulation,not only the efficiency but also the stability would be improved.Herein,a brief review of innovative strategies towards the structure design is presented.
基金Project(2011D039)supported by Guangdong Innovative Research Team Program,China
文摘Electrophoretic display(EPD) technology has become one of the main supporting pillars of the electronic paper display industry.Despite its benefits,the EPD technology suffers from several disadvantages such as non-fixed threshold voltage value for gray scale display.In addition,the display has to repeatedly refresh between white and black states to eliminate ghost image when it needs to update a new image.The traditional driving waveform for the EPD includes four stages: erasing the original image,resetting to black state,clearing to white state,and writing a new image.A flicker can be found when transferring between two adjacent stages.A new driving waveform based on the improvement of activation pattern is proposed to weaken the ghost image and reduce the flicker.Experimental results show that the proposed driving waveform could weaken the ghost image effectively and reduce the number of flickers by 50%.Compared with the traditional driving waveform,the driving waveform of this work has a better performance.
基金supported by the National Natural Science Foundation of China (60672073)the Program for New Century Excellent Talents in University (NCET-06-0537)+1 种基金the Natural Science Foundation of Ningbo (2008A610016)the K.C.Wong Magna Fund in Ningbo University.
文摘Color inconsistency between views is an important problem to be solved in multi-view video systems. A multi-view video color correction method using dynamic programming is proposed. Three-dimensional histograms are constructed with sequential conditional probability in HSI color space. Then, dynamic programming is used to seek the best color mapping relation with the minimum cost path between target image histogram and source image histogram. Finally, video tracking technique is performed to correct multi-view video. Experimental results show that the proposed method can obtain better subjective and objective performance in color correction.
基金supported by the National Basic Research Program of China (973 Program) (2010CB734104)
文摘A novel group decision-making （GDM） method based on intuitionistic fuzzy sets （IFSs） is developed to evaluate the ergonomics of aircraft cockpit display and control system （ACDCS）. The GDM process with four steps is discussed. Firstly, approaches are proposed to transform four types of common judgement representations into a unified expression by the form of the IFS, and the features of unifications are analyzed. Then, the aggregation operator called the IFSs weighted averaging （IFSWA） operator is taken to synthesize decision-makers’ （DMs’） preferences by the form of the IFS. In this operator, the DM’s reliability weights factors are determined based on the distance measure between their preferences. Finally, an improved score function is used to rank alternatives and to get the best one. An illustrative example proves the proposed method is effective to valuate the ergonomics of the ACDCS.
基金Project(08Y29-7)supported by the Transportation Science and Research Program of Jiangsu Province,ChinaProject(201103051)supported by the Major Infrastructure Program of the Health Monitoring System Hardware Platform Based on Sensor Network Node,China+1 种基金Project(61100111)supported by the National Natural Science Foundation of ChinaProject(BE2011169)supported by the Scientific and Technical Supporting Program of Jiangsu Province,China
文摘The variable block-size motion estimation(ME) and disparity estimation(DE) are adopted in multi-view video coding(MVC) to achieve high coding efficiency. However, much higher computational complexity is also introduced in coding system, which hinders practical application of MVC. An efficient fast mode decision method using mode complexity is proposed to reduce the computational complexity. In the proposed method, mode complexity is firstly computed by using the spatial, temporal and inter-view correlation between the current macroblock(MB) and its neighboring MBs. Based on the observation that direct mode is highly possible to be the optimal mode, mode complexity is always checked in advance whether it is below a predefined threshold for providing an efficient early termination opportunity. If this early termination condition is not met, three mode types for the MBs are classified according to the value of mode complexity, i.e., simple mode, medium mode and complex mode, to speed up the encoding process by reducing the number of the variable block modes required to be checked. Furthermore, for simple and medium mode region, the rate distortion(RD) cost of mode 16×16 in the temporal prediction direction is compared with that of the disparity prediction direction, to determine in advance whether the optimal prediction direction is in the temporal prediction direction or not, for skipping unnecessary disparity estimation. Experimental results show that the proposed method is able to significantly reduce the computational load by 78.79% and the total bit rate by 0.07% on average, while only incurring a negligible loss of PSNR(about 0.04 d B on average), compared with the full mode decision(FMD) in the reference software of MVC.
文摘In multi-view image localization task,the features of the images captured from different views should be fused properly.This paper considers the classification-based image localization problem.We propose the relational graph location network(RGLN)to perform this task.In this network,we propose a heterogeneous graph construction approach for graph classification tasks,which aims to describe the location in a more appropriate way,thereby improving the expression ability of the location representation module.Experiments show that the expression ability of the proposed graph construction approach outperforms the compared methods by a large margin.In addition,the proposed localization method outperforms the compared localization methods by around 1.7%in terms of meter-level accuracy.
文摘Multi-view laser radar （ladar） data registration in obscure environments is an important research field of obscured target detection from air to ground. There are few overlap regions of the observational data in different views because of the occluder, so the multi-view data registration is rather difficult. Through indepth analyses of the typical methods and problems, it is obtained that the sequence registration is more appropriate, but needs to improve the registration accuracy. On this basis, a multi-view data registration algorithm based on aggregating the adjacent frames, which are already registered, is proposed. It increases the overlap region between the pending registration frames by aggregation and further improves the registration accuracy. The experiment results show that the proposed algorithm can effectively register the multi-view ladar data in the obscure environment, and it also has a greater robustness and a higher registration accuracy compared with the sequence registration under the condition of equivalent operating efficiency.
基金Supported by the National Key R&D Program of China(2017YFD0501102,20I7YFD050I103-03 and 2017YFD0501004)Science and Technology Department of Heilongjiang Province(GX18B018)Education Department ofHeilongjiang Province(TSTAU-R2018017)。
文摘Goose parvovirus(GPV)can cause a highly contagious and fatal gosling plague(GP)disease in goslings and muscoy ducklings.Here,three goose-origin neutralizing single chain variable fragment(scFv)antibodies against GPV SYG-61 were isolated.The genes of scFv antibodies were derived from goslings immunized with GPV SYG-61,and scFvs were subcloned into a pBSD vector for the construction of pBSD-scFv libraries.The pBSD-scFv libraries were screened following three rounds using VP2(protective antigen of GPV)as the bait by flow cytometry(FCM).After screening,the 15 clones with high mean fluorescence intensity(MFI)were isolated and sequenced.These 15 scFvs were expressed by pET-28a(+)in E.coli.The specificity and affinity of the 15 purified scFvs were successfully confirmed by ELISA.In the preliminary neutralization experiment on primary goose embryo fibroblast(GEF)in vitro,three of the 15 purified scFvs(named scFv-10,scFv-11 and scFv-50)showed significant neutralizing capacities.The study generated the first goose-origin neutralizing scFv against GPV and laid the foundation for the appearance of full-length goose-origin neutralizing monoclonal antibody against GPV.
文摘TiO2 particles coated with polystyrene which were prepared via in situ polymerization and oil green dye were dispersed in tetrachloroethylene and xylene, the mixture came to be electrophoretic ink and was encapsulated in to microcapsules by complex coacervation from gelatin and a hydrolyzed copolymer of styrene and maleic anhydride（SMA）. It was demonstrated that the membranes of the microcapsules were formed from nano sized coacervate droplets resulting from gelation and hydrolyzed SMA, which leads to a compact membrane structure. Microcapsules were characterized in terms of microstructure, morphologies by scanning electron microscopy（SEM）. Electrophoretic display prototype was prepared by coating electrophoretic ink microcapsules slurry on ITO glass with nearly single layer and sealed by UV curable adhesives. The characters “Zheda” in Chinese was firstly displayed at a low volt 9 V D.C..
