期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
Mowing Height and Mowing Frequency Interactions on Turf Performance of Kentucky Bluegrass
1
作者 Sun Xiao-yang Wang Peng +5 位作者 Xie Fu-chun Sun Hua-shan Guan Tong Zuo Yang Li Hong Chen Ya-jun 《Journal of Northeast Agricultural University(English Edition)》 CAS 2018年第3期10-15,共6页
The mowing height and mowing frequency are the key factors that affect the turf quality and turfgrass growing ability. The purpose of this study was to reveal the alternative effcient interaction between mowing height... The mowing height and mowing frequency are the key factors that affect the turf quality and turfgrass growing ability. The purpose of this study was to reveal the alternative effcient interaction between mowing height and mowing frequency in Kentucky bluegrass turf management. The Kentucky bluegrass cultivar 'Kenblue' (Poa pratensis L.) was used to evaluate the interactions of mowing heights (H1, H4 and H7) and mowing frequencies (F2, F5 and F8) on the performance of turfgrass and turf physiological responses under the feld condition. The results showed that the treatment of H7×F8 had perfect infuence on the turf texture, root elongation, and also enhanced soluble sugar and free proline content in plants. While, the turf quality, color, uniformity and the increasing tiller numbers were performed more superior in the treatment of H4×F5 than other treatments. In all the interacting treatments, the relation between leaf green index and number of shoots (dm2) was positively correlated, thus, it could be speculated that the proper mowing height with frequency had a strong impact on the increasing of turfgrass tillers. On the whole, the interaction of H4×F5 on turf quality was the most excellent treatment in this experiment. 展开更多
关键词 Kentucky bluegrass TURF mowing HEIGHT FREQUENCY
在线阅读 下载PDF
15Cr2Ni3MoW钢管穿孔顶头氧化膜制备工艺的研究 被引量:6
2
作者 张金菊 易丹青 +1 位作者 王斌 王福晶 《热加工工艺》 CSCD 北大核心 2011年第18期133-137,共5页
研究了15Cr2Ni3MoW合金穿孔顶头在900~1000℃、3~12 h、氧气气氛中氧化膜的生成行为。用OM、XRD、SEM、HV分析研究氧化膜的微观组织形貌、相组成及显微硬度的变化,并对氧化膜生成机理进行探讨。结果表明:在氧气气氛中合金生成内外两... 研究了15Cr2Ni3MoW合金穿孔顶头在900~1000℃、3~12 h、氧气气氛中氧化膜的生成行为。用OM、XRD、SEM、HV分析研究氧化膜的微观组织形貌、相组成及显微硬度的变化,并对氧化膜生成机理进行探讨。结果表明:在氧气气氛中合金生成内外两层氧化膜,外层氧化膜主要为Fe2O3和Fe3O4,内层氧化膜主要为(Fe、Cr)3O4;随氧化时间延长和氧化温度升高,氧化膜厚度不断增加,但内层与外层氧化膜之间的结合力以及内层氧化膜与顶头基体之间的结合力,不随氧化膜厚度的增加而增大,当氧化时间和温度超过个某个范围后,所生成氧化膜间的结合力反而降低。 展开更多
关键词 15Cr2Ni3MoW 氧气气氛 氧化膜 结合力
在线阅读 下载PDF
20CrNi3MoW穿孔顶头组织分析 被引量:3
3
作者 李琼 曹家龙 +2 位作者 陈玉强 敬华 郝胜川 《热加工工艺》 CSCD 北大核心 2008年第4期74-76,共3页
对20CrNi3MoW钢穿孔顶头的显微组织和硬度变化进行了研究。结果表明,顶头原始组织为粒状贝氏体组织,同时夹杂部分隐针马氏体和残余奥氏体;经正火处理后顶头组织改善,性能提升。顶头表面氧化膜应均匀、致密,因此应合理控制氧化条件,得到... 对20CrNi3MoW钢穿孔顶头的显微组织和硬度变化进行了研究。结果表明,顶头原始组织为粒状贝氏体组织,同时夹杂部分隐针马氏体和残余奥氏体;经正火处理后顶头组织改善,性能提升。顶头表面氧化膜应均匀、致密,因此应合理控制氧化条件,得到尽可能多的FeO层。最后结合生产实际提出了改进措施。 展开更多
关键词 20CrNi3MoW钢 穿孔顶头 显微组织 表面氧化膜 硬度
在线阅读 下载PDF
采用不同方法预测10Cr9MoW2VNbBN钢蠕变曲线的比较 被引量:5
4
作者 江冯 刘春慧 +1 位作者 程从前 赵杰 《机械工程材料》 CAS CSCD 北大核心 2015年第3期89-93,共5页
采用θ投影法和自行建立的复合修正模型对10Cr9MoW2VNbBN钢的蠕变曲线进行了预测,并与600℃和650℃时的蠕变试验数据进行了对比。结果表明:θ投影法能较好地描述蠕变应变与时间的关系,但对蠕变速率与时间的关系不能客观描述;自行建立的... 采用θ投影法和自行建立的复合修正模型对10Cr9MoW2VNbBN钢的蠕变曲线进行了预测,并与600℃和650℃时的蠕变试验数据进行了对比。结果表明:θ投影法能较好地描述蠕变应变与时间的关系,但对蠕变速率与时间的关系不能客观描述;自行建立的复合修正模型能够更客观地描述试验钢真实的蠕变行为;但基于复合修正模型的蠕变曲线结合断裂应变进行持久寿命外推时,其外推值高于真实值。 展开更多
关键词 θ投影法 复合修正模型 10Cr9MoW2VNbBN钢 寿命预测 蠕变
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部