The effect of the positive bias on Reynolds stress （RS） and its effect on the radial turbulent transport at the edge plasma （r/a =0.9） and scrape-off layer （SOL） region of plasma in tokamak are investigated. The...The effect of the positive bias on Reynolds stress （RS） and its effect on the radial turbulent transport at the edge plasma （r/a =0.9） and scrape-off layer （SOL） region of plasma in tokamak are investigated. The radial and poloidal electric fields （Sr, Ep） and ion saturation current （Is） are measured by multi-purpose probe （MPP）. This probe is fabricated and constructed for the first time in the IR-T1 tokamak. The most advantage of this probe is that the variations of Er and Ep can be measured in different radii at the single shot. Thus the information of different radii can be compared with high precision. The bias voltage is fixed at Vbias = 200 V and it has been applied with the limiter bias that is fixed in r/a = 0.9. Moreover, the phase difference between radial and poloidal electric fields, and temporal evolution of the RS .spectrum detected by MPP are calculated. RS magnitude on the edge （r/a = 0.9） is more than its value in the SOL （r/a = 1.02）. With the applied bias 200 V, ItS and the magnitude of the phase difference between Er and Ep are increased, while the radial turbulent transport is decreased simultaneously. Thus it can be concluded that RS affects radial turbulence. Temporal evolution of the RS spectrum shows that the frequency of RS is increased and reaches its highest value at r/a=0.9 in the presence of bias.展开更多
The present study examines the extent of negative eff ects of traditional multiple land-use systems on oak coppices,from a forest management point of view.The study area was located in approximately 10,000 ha of hilly...The present study examines the extent of negative eff ects of traditional multiple land-use systems on oak coppices,from a forest management point of view.The study area was located in approximately 10,000 ha of hilly Brant’s oak(Quercus brantii Lindl.)woodlands in the central Zagros Mountains.In the same site-quality class,three land-use systems were compared:simple coppice(Co),coppice in conjunction with small ruminant grazing(CoG),and coppice with understory rain-fed wheat cultivation plus grazing(CoCG).Data on total wood volume of trunk and major branches,and annual ring growth,were collected and analyzed from 74 stands in 15 coppiced woodland patches.The results showed the advantage of Co over CoG and CoCG land-uses by 43 and 60 m 3 of mean accumulated wood volume per hectare,respectively.The diameter growth analysis also revealed an annual increase in wood production of trees in Co land-uses over 43 years,with an exception of the recent decade,when growth coincided with a severe drought.Using a back-extrapolation method,the minimum rotation age of woodlands in Co land-use was found to be 23.6 years,5 and 7 years shorter than those of CoG and CoCG land-uses,respectively.Unlike CoCG,woodlands located in Co and CoG land-use systems demonstrated a high level of agreement with self-thinning rule of−3/2.Values for the stand density index for coppiced oak woodlands were between more than 1000 for the least disturbed(Co)and less than 400 for the most disturbed woodlands(CoCG).The structure and growth rate of the coppiced oak woodlands were irreversibly disrupted by understory tillage plus grazing and in less extent by grazing alone.It was concluded that ending undergrowth cultivation in semi-arid oak coppices should be addressed as a priority by adopting minimum regulations.展开更多
With high rock slope in shiplock area, thin reinforced concrete lining walls are constructed for the shiplock system. The construction technology involves much complicated structures in formwork, frequent interference...With high rock slope in shiplock area, thin reinforced concrete lining walls are constructed for the shiplock system. The construction technology involves much complicated structures in formwork, frequent interference due to crossover working procedures, tight time schedule, high quality of reinforced concrete and showcase appearance requirements, hidden troubles affecting construction safety. With above-mentioned factors in consideration, a single-side-separated sliding formwork technology advanced from past sliding formwork experiences has been developed and applied successfully. This new technology is beneficial in quick and safe operation, capable to assure best quality and appearance of shiplock concrete works, and has filled up the gap in terms of construction sliding formwork in our country.展开更多
文摘The effect of the positive bias on Reynolds stress （RS） and its effect on the radial turbulent transport at the edge plasma （r/a =0.9） and scrape-off layer （SOL） region of plasma in tokamak are investigated. The radial and poloidal electric fields （Sr, Ep） and ion saturation current （Is） are measured by multi-purpose probe （MPP）. This probe is fabricated and constructed for the first time in the IR-T1 tokamak. The most advantage of this probe is that the variations of Er and Ep can be measured in different radii at the single shot. Thus the information of different radii can be compared with high precision. The bias voltage is fixed at Vbias = 200 V and it has been applied with the limiter bias that is fixed in r/a = 0.9. Moreover, the phase difference between radial and poloidal electric fields, and temporal evolution of the RS .spectrum detected by MPP are calculated. RS magnitude on the edge （r/a = 0.9） is more than its value in the SOL （r/a = 1.02）. With the applied bias 200 V, ItS and the magnitude of the phase difference between Er and Ep are increased, while the radial turbulent transport is decreased simultaneously. Thus it can be concluded that RS affects radial turbulence. Temporal evolution of the RS spectrum shows that the frequency of RS is increased and reaches its highest value at r/a=0.9 in the presence of bias.
基金We express our appreciation to the 2018 forestry graduate students’team for their great help in data collection.We also gratefully acknowledge the Provincial Natural Resources Bureau for providing us with their archive of journey reports and grazing license contracts.Finally,we appreciate the anonymous reviewers who carefully read the manuscript and made many insightful comments.
文摘The present study examines the extent of negative eff ects of traditional multiple land-use systems on oak coppices,from a forest management point of view.The study area was located in approximately 10,000 ha of hilly Brant’s oak(Quercus brantii Lindl.)woodlands in the central Zagros Mountains.In the same site-quality class,three land-use systems were compared:simple coppice(Co),coppice in conjunction with small ruminant grazing(CoG),and coppice with understory rain-fed wheat cultivation plus grazing(CoCG).Data on total wood volume of trunk and major branches,and annual ring growth,were collected and analyzed from 74 stands in 15 coppiced woodland patches.The results showed the advantage of Co over CoG and CoCG land-uses by 43 and 60 m 3 of mean accumulated wood volume per hectare,respectively.The diameter growth analysis also revealed an annual increase in wood production of trees in Co land-uses over 43 years,with an exception of the recent decade,when growth coincided with a severe drought.Using a back-extrapolation method,the minimum rotation age of woodlands in Co land-use was found to be 23.6 years,5 and 7 years shorter than those of CoG and CoCG land-uses,respectively.Unlike CoCG,woodlands located in Co and CoG land-use systems demonstrated a high level of agreement with self-thinning rule of−3/2.Values for the stand density index for coppiced oak woodlands were between more than 1000 for the least disturbed(Co)and less than 400 for the most disturbed woodlands(CoCG).The structure and growth rate of the coppiced oak woodlands were irreversibly disrupted by understory tillage plus grazing and in less extent by grazing alone.It was concluded that ending undergrowth cultivation in semi-arid oak coppices should be addressed as a priority by adopting minimum regulations.
文摘With high rock slope in shiplock area, thin reinforced concrete lining walls are constructed for the shiplock system. The construction technology involves much complicated structures in formwork, frequent interference due to crossover working procedures, tight time schedule, high quality of reinforced concrete and showcase appearance requirements, hidden troubles affecting construction safety. With above-mentioned factors in consideration, a single-side-separated sliding formwork technology advanced from past sliding formwork experiences has been developed and applied successfully. This new technology is beneficial in quick and safe operation, capable to assure best quality and appearance of shiplock concrete works, and has filled up the gap in terms of construction sliding formwork in our country.
