The oligomerization of light olefins is considered a green production technology.Currently,the application of mordenite in isoamylene oligomerization faces two main challenges:low dimerization selectivity and poor sta...The oligomerization of light olefins is considered a green production technology.Currently,the application of mordenite in isoamylene oligomerization faces two main challenges:low dimerization selectivity and poor stability.In this work,a series of different SiO_(2)/Al_(2)O_(3) ratio mordenite are synthesized by utilizing hexamethyleneimine(HMI)as the organic structure directing agent,and it turns out that the rod-like zeolite with the ratio of SiO_(2)/Al_(2)O_(3)=14 exhibits the higher dimerization selectivity.The incorporation of TPOAC optimizes the pore structure and acid site distribution of the rod-like zeolite,which enables the samples to not only exhibit a conversion rate of isoamylene over 88.30% within 12 h,while maintaining good dimerization selectivity.These findings provide a promising approach for improving the efficiency and sustainability of olefin oligomerization processes.展开更多
Mg-Gd alloy particle has exhibited its unique combustion properties as the fuel of Mg/Teflon/Viton(MTV).Mg-Gd alloy/Teflon/Viton(MGTV)could burn at lower ambient pressure than MTV.To further investigate the reaction o...Mg-Gd alloy particle has exhibited its unique combustion properties as the fuel of Mg/Teflon/Viton(MTV).Mg-Gd alloy/Teflon/Viton(MGTV)could burn at lower ambient pressure than MTV.To further investigate the reaction of MGTV in air,it was investigated via thermo gravity-differential scanning calorimetry(TG-DSC).Meanwhile,the morphologies and element distributions on the alloy surface during the reaction of MGTV in air were investigated via scanning electronic microscope-mapping-electronic differential spectrometer.Meanwhile,a similar experimental protocol on the Mg-Gd alloy particle during oxidation was also applied.The results showed that owning to a protective oxide shell,the onset oxidation temperature of Mg-Gd alloy is higher than Mg.However,the onset oxidation temperature of the exceeded Mg-Gd alloy in MGTV is significantly lower than that of the exceeded Mg in MTV.It was due to the existence of GdOF,which could significantly lower the oxidation temperature of the exceeded fuel.Furthermore,a possible reaction mechanism was proposed.The fascinating oxidation properties of Mg-Gd alloy suggested its promising applications in energetic materials.展开更多
The Co@NC catalysts with different morphologies were prepared by two step process,solvent control growth and pyrolysis method.The polyhedral Co@NC-67P-450 catalyst has a relatively high CoNx content and exhibits excel...The Co@NC catalysts with different morphologies were prepared by two step process,solvent control growth and pyrolysis method.The polyhedral Co@NC-67P-450 catalyst has a relatively high CoNx content and exhibits excellent phenol hydrogenation activity(conversion 96.9%)at 160℃,3 MPa,which is higher than that of leaf shaped Co@NC-67L-450 catalyst(conversion 75.4%).We demonstrated Co_(3)O_(4)was reduced to the Co^(0)during the reaction.Moreover,CoNx species contribute to the superior hydrogenation activity of phenol.The Co-based catalysts can be easily recovered through the magnetic separation and performed the high stability.展开更多
Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and...Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and morphology. In order to satisfy various applications, well-crystallized pure HA nanoparticles were synthesized at moderate temperatures by hydrotherrnal synthesis, and HA nanoparticles with different lengths were obtained by adding organic additives. X-ray diffractometry （XRD） and Fourier transform infrared （FTIR） spectrometry were used to characterize these nanoparticles, and the morphologies of the HA particles were observed by transmission electron microscopy （TEM）. The results demonstrate that shorter rod-like HA particles can be prepared by adding cetyltrimethylammonium bromide （CTAB）, as the additive of CTAB can block the HA crystal growth along with c-axis. And whisker HA particles are obtained by adding ethylenediamine tetraacetic acid （EDTA）, since EDTA may have effect on the dissolution-repreeipitation process of HA.展开更多
The fracture behaviour and morphologies of high-strength boron steel were investigated at different temperatures at a constant strain rate of 0.1 s-1 based on isothermal tensile tests. Fracture mechanisms were also an...The fracture behaviour and morphologies of high-strength boron steel were investigated at different temperatures at a constant strain rate of 0.1 s-1 based on isothermal tensile tests. Fracture mechanisms were also analyzed based on the relationship between microstructure transformation and continuous cooling transformation(CCT) curves. It is found that 1) fractures of the investigated steel at high temperatures are dimple fractures; 2) the deformation of high-strength boron steel at high temperatures accelerates diffusion transformations; thus, to obtain full martensite, a higher cooling rate is needed; and 3) the investigated steel has the best plasticity when the deformation temperature is 750 °C.展开更多
Stegolophodon is an age-informative genus of mammals that had a widespread distribution during the Neogene.This paper reports the discovery of Stegolophodon fossils from the Middle Miocene lower Fotan Formation at the...Stegolophodon is an age-informative genus of mammals that had a widespread distribution during the Neogene.This paper reports the discovery of Stegolophodon fossils from the Middle Miocene lower Fotan Formation at the Zhangpu locality,Fujian Province,China.This discovery represents the first evidence of Neogene proboscidean fossils in southeastern China.The newly found molar materials have low tooth crowns,very straight lophs/lophids,and an indistinct median sulcus.The mesoconelets and posterior cingulum are well-developed,while the second posterior pretrite central conule is significantly reduced.These specimens closely resemble Stegolophodon pseudolatidens in cheek tooth morphology,and can thus be attributed to the same species.This discovery fills a gap in the fossil record of large mammals in this region during the Neogene and provides valuable insights into the evolution of proboscideans and paleoenvironments.展开更多
The preferential oxidation of CO(CO-PROX)reaction is a cost-effective method for eliminating trace amounts of CO from the fuel H2.Pt-based catalysts have been extensively studied for COPROX,with their activity influen...The preferential oxidation of CO(CO-PROX)reaction is a cost-effective method for eliminating trace amounts of CO from the fuel H2.Pt-based catalysts have been extensively studied for COPROX,with their activity influenced by the morphology of the support.Hydrothermal synthesis was employed to produce different morphologies ofγ-Al_(2)O_(3):flower-likeγ-Al_(2)O_(3)(f)exposing(110)crystal faces,sheet-likeγ-Al_(2)O_(3)(s)revealing(100)crystal faces,and rod-likeγ-Al_(2)O_(3)(r)displaying(111)crystal faces,followed by loading PtCo nanoparticles.The exposed crystal faces of the support impact the alloying degree of the PtCo nanoparticles,and an increase in the alloying degree correlates with enhanced catalyst reactivity.Pt_(3)Co intermetallic compounds were identified onγ-Al_(2)O_(3)(f)exposing(110)crystal faces,and PtCo/γ-Al_(2)O_(3)(f)showed high catalytic activity in the CO-PROX reaction,achieving 100%CO conversion across a broad temperature range of 50−225°C.In contrast,only partial alloying of PtCo was observed onγ-Al_(2)O_(3)(s).Furthermore,no alloying between Pt and Co occurred in PtCo/γ-Al_(2)O_(3)(r),resulting in a reaction rate at 50°C that was merely 11%of that of PtCo/γ-Al_(2)O_(3)(f).The formation of Pt3Co intermetallic compounds led to a more oxidized state of Pt,which significantly diminished the adsorption of CO on Pt and augmented the active oxygen species,thereby facilitating the selective oxidation of CO.展开更多
The East China Sea(ECS)off the Coast of Zhoushan Archipelago,Zhejiang(ECS-CZA)is home to abundant fishery resources and an important spawning,feeding,and nursing ground for a variety of fish species.Due to long-term o...The East China Sea(ECS)off the Coast of Zhoushan Archipelago,Zhejiang(ECS-CZA)is home to abundant fishery resources and an important spawning,feeding,and nursing ground for a variety of fish species.Due to long-term overfishing,the ichthyoplankton structure has been dramatically altered.Understanding the species composition and distribution of fish eggs and larvae is one of the most essential tasks to accurately regulate fishery resources and formulate effective management policies;however,little is known about the ichthyoplankton in this region.In this study,an integrated strategy of morphology identification(MI)and mitochondrial COI DNA barcoding was used to identify species of fish eggs and larvae collected from the ECSCZA.MI revealed 15 fish egg species belonging to 12 families and 12 fish larva species belonging to 12 families;in contrast,DNA barcoding altogether identified 30 species,including 18 fish egg species and 13 fish larva species.One species was shared between the egg and larva samples.Our study offers useful tools and critical scientific information for further understanding the diversity,distribution,and conservation management of various ichthyoplankton species in the marine environment.展开更多
Driven by rapid technological advancements and economic growth,mineral extraction and metal refining have increased dramatically,generating huge volumes of tailings and mine waste(TMWs).Investigating the morphological...Driven by rapid technological advancements and economic growth,mineral extraction and metal refining have increased dramatically,generating huge volumes of tailings and mine waste(TMWs).Investigating the morphological fractions of heavy metals and metalloids(HMMs)in TMWs is key to evaluating their leaching potential into the environment;however,traditional experiments are time-consuming and labor-intensive.In this study,10 machine learning(ML)algorithms were used and compared for rapidly predicting the morphological fractions of HMMs in TMWs.A dataset comprising 2376 data points was used,with mineral composition,elemental properties,and total concentration used as inputs and concentration of morphological fraction used as output.After grid search optimization,the extra tree model performed the best,achieving coefficient of determination(R2)of 0.946 and 0.942 on the validation and test sets,respectively.Electronegativity was found to have the greatest impact on the morphological fraction.The models’performance was enhanced by applying an ensemble method to the top three optimal ML models,including gradient boosting decision tree,extra trees and categorical boosting.Overall,the proposed framework can accurately predict the concentrations of different morphological fractions of HMMs in TMWs.This approach can minimize detection time,aid in the safe management and recovery of TMWs.展开更多
As a typical sedimentary soft rock,mudstone has the characteristics of being easily softened and disintegrated under the effect of wetting and drying(WD).The first cycle of WD plays an important role in the entire WD ...As a typical sedimentary soft rock,mudstone has the characteristics of being easily softened and disintegrated under the effect of wetting and drying(WD).The first cycle of WD plays an important role in the entire WD cycles.X-ray micro-computed tomography(micro-CT)was used as a non-destructive tool to quantitatively analyze microstructural changes of the mudstone due to the first cycle of WD.The test results show that WD leads to an increase of pore volume and pore connectivity in the mudstone.The porosity and fractal dimension of each slice of mudstone not only increase in value,but also in fluctuation amplitude.The pattern of variation in the frequency distribution of the equivalent radii of connected,isolated pores and pore throats in mudstone under WD effect satisfies the Gaussian distribution.Under the effect of WD,pores and pore throats with relatively small sizes increase the most.The sphericity of the pores in mudstones is positively correlated with the pore radius.The WD effect transforms the originally angular and flat pores into round and regular pores.This paper can provide a reference for the study of the deterioration and catastrophic mechanisms of mudstone under wetting and drying cycles.展开更多
Boron has high mass and volume calorific values,but it is difficult to ignite and has low combustion efficiency.This literature review summarizes the strategies that are used to solve the above-mentioned problems,whic...Boron has high mass and volume calorific values,but it is difficult to ignite and has low combustion efficiency.This literature review summarizes the strategies that are used to solve the above-mentioned problems,which include coatings of boron by using fluoride compounds,energetic composites,metal fuels,and metal oxides.Coating techniques include recrystallization,dual-solvent,phase transfer,electrospinning,etc.As one of the effective coating agents,the fluorine compounds can react with the oxide shell of boron powder.In comparison,the energetic composites can effectively improve the flame temperature of boron powder and enhance the evaporation efficiency of oxide film as a condensed product.Metals and metal oxides would react with boron powder to form metal borides with a lower ignition point,which could reduce its ignition temperature.展开更多
Boehmeria nivea var.strigosa Zeng Y.Wu&Y.Zhao,a new variety of B.nivea(Urticaceae)from Southwest China,is here described based on evidence from morphology and molecular phylogeny.This new variety is mainly charact...Boehmeria nivea var.strigosa Zeng Y.Wu&Y.Zhao,a new variety of B.nivea(Urticaceae)from Southwest China,is here described based on evidence from morphology and molecular phylogeny.This new variety is mainly characterized by its green abaxial leaf blade,partly connate stipules,and densely patent strigose hairs on stems and potioles.The phylogenetic analysis based on rbc L,nrDNA and rbc L+nrDNA datasets,revealed that all individuals of B.nivea var.strigosa formed a monophyletic group.The conservation status of B.nivea var.strigosa is assessed as“Near Threatened”(NT)according to IUCN evaluation criteria.The discovery of this new variety is not only crucial for the taxonomy of ramie,but also provides reference for the exploration and utilization of ramie.展开更多
Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while exte...Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while extending their lifespan.This paper explores the application of laser-assisted water jet technology in constructing high-quality micro-trap structures on 316L stainless steel,a key material in accelerator manufacturing.The study systematically analyzes the impact of various parameters such as laser repetition frequency,pulse duration,average power,water jet pressure,repeat times,nozzle offset,focal position,offset distance between grooves,and processing speed on the surface morphology of stainless steel.The findings reveal that micro-groove depth increases with higher laser power but decreases with increasing water jet pressure and processing speed.Interestingly,repeat times have minimal effect on depth.On the other hand,micro-groove width increases with higher laser power and repeat times but decreases with processing speed.By optimizing these parameters,the researchers achieved high-quality pound sign-shaped trap structure with consistent dimensions.We tested the secondary electron emission coefficient of the"well"structure.The coefficient is reduced by 0.5 at most compared to before processing,effectively suppressing secondary electron emission.These results offer indispensable insights for the fabrication of micro-trap structures on material surfaces.Laser-assisted water jet technology demonstrates considerable potential in mitigating SEE on metal surfaces.展开更多
Elymus duthiei(Melderis)G.Singh,newly recorded from Xizang,China,is described and illustrated in detail.Morphologically,the species is similar to E.anthosachnoides(Keng)Á.Löve ex B.R.Lu and E.glaberrimus(Ken...Elymus duthiei(Melderis)G.Singh,newly recorded from Xizang,China,is described and illustrated in detail.Morphologically,the species is similar to E.anthosachnoides(Keng)Á.Löve ex B.R.Lu and E.glaberrimus(Keng&S.L.Chen)S.L.Chen but differs from the former in height and diameter of culms,number of nodes,width of leaf blades,and type of trichome and size of spikelets,and from the latter in distribution,height of culms,type of trichome of spikelets,and awn length.Detailed photo plates,descriptions,and distribution data are provided.展开更多
The early Silurian Chongqing Lagerstätte(middle Telychian)yields exceptionally preserved articulated jawless and jawed fishes.Here,we describe a new eugaleaspiform(Galeaspida,jawless stem-Gnathostomata),Miaojiaas...The early Silurian Chongqing Lagerstätte(middle Telychian)yields exceptionally preserved articulated jawless and jawed fishes.Here,we describe a new eugaleaspiform(Galeaspida,jawless stem-Gnathostomata),Miaojiaaspis dichotomus gen.et sp.nov.,from the Chongqing Lagerstätte in Xiushan,Chongqing,China.The new form resembles Tujiaaspis vividus in the short medial dorsal canal,and the presence of the branching ends of the lateral transverse canal.They differ in that T.vividus has highly developed subordinate branches of the sensory canals that form a reticulate sensory canal system,and the median dorsal opening is more elongated.Our phylogenetic analysis recovers M.dichotomus and T.vividus as a monophyletic clade(Tujiaaspidae fam.nov.),which is supported by two synapomorphies:the short medial dorsal canal,and the branching ends of the lateral transverse canal.Tujiaaspidae forms a trichotomy with Shuyuidae and a clade comprising Anjiaspis,Sinogaleaspidae,Yongdongaspidae,and the‘eugaleaspid cluster’.The sensory canal patterns in galeaspids are compared to show the transformation sequence of the sensory canal system in Eugaleaspiformes.展开更多
The hydrogen evolution reaction(HER)is a promising way to produce hydrogen,and the use of non-precious metals with an excellent electrochemical performance is vital for this.Carbon-based transition metal catalysts hav...The hydrogen evolution reaction(HER)is a promising way to produce hydrogen,and the use of non-precious metals with an excellent electrochemical performance is vital for this.Carbon-based transition metal catalysts have high activity and stability,which are important in reducing the cost of hydrogen production and promoting the development of the hydrogen production industry.However,there is a lack of discussion regarding the effect of carbon components on the performance of these electrocatalysts.This review of the literature discusses the choice of the carbon components in these catalysts and their impact on catalytic performance,including electronic structure control by heteroatom doping,morphology adjustment,and the influence of self-supporting materials.It not only analyzes the progress in HER,but also provides guidance for synthesizing high-performance carbon-based transition metal catalysts.展开更多
Background Understanding the mechanism of male sterility is crucial for producing hybrid seeds and developing sterile germplasm resources.However,only a few cytoplasmic male sterility(CMS)lines of cotton have been pro...Background Understanding the mechanism of male sterility is crucial for producing hybrid seeds and developing sterile germplasm resources.However,only a few cytoplasmic male sterility(CMS)lines of cotton have been produced due to several challenges,like inadequate variation of agronomic traits,incomplete sterility,weak resilience of restorer lines,and difficulty in combining strong dominance.Therefore,the morphological and cytological identification of CMS in cotton will facilitate hybrid breeding.Results Two F_(2) segregating populations of cotton were constructed from cytoplasmic male sterile lines(HaA and 01A,maternal)and restorer lines(HaR and 26R,paternal).Genetic analysis of these populations revealed a segregation ratio of 3:1 for fertile to sterile plants.Phenotypic analysis indicated no significant differences in traits of flower bud development between sterile and fertile plants.However,sterile plants exhibited smaller floral organs,shortened filament lengths,and anther atrophy on the flowering day in comparison with the fertile plants.When performed scanning electron microscopy(SEM),the two F_(2) populations revealed morphological variations in the anther epidermis.Cellular analysis showed no significant differences in pollen development before pollen maturation.Interestingly,between the pollen maturation and flowering stages,the tapetum layer of sterile plants degenerated prematurely,resulting in abnormal pollen grains and gradual pollen degradation.Conclusion The results of this study suggest that fertility-restoring genes are controlled by a single dominant gene.Sterile plants exhibit distinctive floral morphology,which is characterized by stamen atrophy and abnormal anthers.Pollen abortion occurs between pollen maturity and flowering,indicating that premature tapetum degradation may be the primary cause of pollen abortion.Overall,our study provides a theoretical basis for utilizing CMS in hybrid breeding and in-depth investigation of the dominant configuration of cotton hybrid combinations,mechanisms of sterility,and the role of sterile and restorer genes.展开更多
The Asiatic hybrid lily cultivar Lilium dazzling(family Liliaceae)is a perennial herbaceous bulbous plant with bright yellow flowers of ornamental values.It also shows resistance to diseases and abiotic stress,making ...The Asiatic hybrid lily cultivar Lilium dazzling(family Liliaceae)is a perennial herbaceous bulbous plant with bright yellow flowers of ornamental values.It also shows resistance to diseases and abiotic stress,making it an ideal parent for breeding studies.This study established a sterile culture system using scales of dazzling lily as explants to induce polyploidy.Adventitious buds growing to 1 cm were treated with different concentrations of colchicine(125,250 and 500μmol·L-1),pendimethalin or trifluralin(100,200 and 300μmol·L-1,respectively)for 12,24 and 36 h.Flow cytometry and chromosome counting were used to identify ploidy,and the phenotype of the polyploids was examined by stomatal observation and leaf index determination.With increasing mutagen concentration and exposure time,the mortality and mutagenic rate increased.The optimal treatment group was:300μmol·L-1 trifluralin for 12 h,which resulted in 15.55%mortality rate and 42.22%induction rate.The polyploid plants showed a significant increase in stomata length,leaf length and leaf width,with a decrease in stomatal density compared with the control plants.This study provided a basis for polyploid breeding.展开更多
Ternary strategy has demonstrated great potential in promoting the power conversion efficiency(PCE)of bulk heterojunction organic solar cells(BHJ OSCs).Two new polymer donors,TPQ-2 F-2 Cl and TPQ-2 F-4 F,were synthesi...Ternary strategy has demonstrated great potential in promoting the power conversion efficiency(PCE)of bulk heterojunction organic solar cells(BHJ OSCs).Two new polymer donors,TPQ-2 F-2 Cl and TPQ-2 F-4 F,were synthesized with chlorinated and fluorinated aromatic side chains,respectively,which contributed to distinct noncovalent interactions.Compared with the PM 6:L 8-BO host system,the TPQ-2 F-2 Cl based ternary OSCs obtained enhanced exciton dissociation and more balanced carrier mobility.Moreover,benefiting from the favorable miscibility of the PM 6:L 8-BO:TPQ-2 F-2 Cl blend,the ternary blending film featured a well-defined fibrillar morphology and improved molecular ordering.Consequently,the optimal PM 6:L 8-BO:TPQ-2 F-2 Cl device achieved a more outstanding PCE of 18.2%,a higher open circuit voltage(V_(oc)),and a better fill factor(FF)in comparison with the binary device(PCE=17.7%).In contrast,the addition of TPQ-2 F-4 F would generate excessive aggregation of blend,thereby reducing the PCE of ternary OSCs(16.0%).This work shows a promising idea for designing efficient third component donor polymers.展开更多
The development of high-performance non-fullerene acceptors with extended exciton diffusion lengths has positioned the sequential layer-by-layer(LBL)solution processing technique as a promising approach for fabricatin...The development of high-performance non-fullerene acceptors with extended exciton diffusion lengths has positioned the sequential layer-by-layer(LBL)solution processing technique as a promising approach for fabricating high-performance and large-area organic solar cells(OSCs).This method allows for the independent dissolution and deposition of donor and acceptor materials,enabling precise morphology control.In this review,we provide a comprehensive overview of the LBL processing technique,focusing on the morphology of the active layer.The swelling intercalation phase-separation(SIPS)model is introduced as the mainstream theory of morphology evolution,with a detailed discussion on vertical phase separation.We summarize recent strategies for morphology optimization.Additionally,we review the progress in LBL-based large-area device and module fabrication,as well as green processing approaches.Finally,we highlight current challenges and future prospects,paving the way for the commercialization of LBL-processed OSCs.展开更多
基金supported by the National Natural Science Foundation of China(21776505)。
文摘The oligomerization of light olefins is considered a green production technology.Currently,the application of mordenite in isoamylene oligomerization faces two main challenges:low dimerization selectivity and poor stability.In this work,a series of different SiO_(2)/Al_(2)O_(3) ratio mordenite are synthesized by utilizing hexamethyleneimine(HMI)as the organic structure directing agent,and it turns out that the rod-like zeolite with the ratio of SiO_(2)/Al_(2)O_(3)=14 exhibits the higher dimerization selectivity.The incorporation of TPOAC optimizes the pore structure and acid site distribution of the rod-like zeolite,which enables the samples to not only exhibit a conversion rate of isoamylene over 88.30% within 12 h,while maintaining good dimerization selectivity.These findings provide a promising approach for improving the efficiency and sustainability of olefin oligomerization processes.
文摘Mg-Gd alloy particle has exhibited its unique combustion properties as the fuel of Mg/Teflon/Viton(MTV).Mg-Gd alloy/Teflon/Viton(MGTV)could burn at lower ambient pressure than MTV.To further investigate the reaction of MGTV in air,it was investigated via thermo gravity-differential scanning calorimetry(TG-DSC).Meanwhile,the morphologies and element distributions on the alloy surface during the reaction of MGTV in air were investigated via scanning electronic microscope-mapping-electronic differential spectrometer.Meanwhile,a similar experimental protocol on the Mg-Gd alloy particle during oxidation was also applied.The results showed that owning to a protective oxide shell,the onset oxidation temperature of Mg-Gd alloy is higher than Mg.However,the onset oxidation temperature of the exceeded Mg-Gd alloy in MGTV is significantly lower than that of the exceeded Mg in MTV.It was due to the existence of GdOF,which could significantly lower the oxidation temperature of the exceeded fuel.Furthermore,a possible reaction mechanism was proposed.The fascinating oxidation properties of Mg-Gd alloy suggested its promising applications in energetic materials.
基金The National Natural Science Foundation of China(22102194)The Science and Technology Plan of Gansu Province(20JR10RA044)The Youth Innovation Promotion Association of CAS(2022427).
文摘The Co@NC catalysts with different morphologies were prepared by two step process,solvent control growth and pyrolysis method.The polyhedral Co@NC-67P-450 catalyst has a relatively high CoNx content and exhibits excellent phenol hydrogenation activity(conversion 96.9%)at 160℃,3 MPa,which is higher than that of leaf shaped Co@NC-67L-450 catalyst(conversion 75.4%).We demonstrated Co_(3)O_(4)was reduced to the Co^(0)during the reaction.Moreover,CoNx species contribute to the superior hydrogenation activity of phenol.The Co-based catalysts can be easily recovered through the magnetic separation and performed the high stability.
基金Project(20070410304) supported by Postdoctoral Foundation of ChinaProject(07JJ3105) supported by Hunan Provincial Natural Science Foundation of China
文摘Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and morphology. In order to satisfy various applications, well-crystallized pure HA nanoparticles were synthesized at moderate temperatures by hydrotherrnal synthesis, and HA nanoparticles with different lengths were obtained by adding organic additives. X-ray diffractometry （XRD） and Fourier transform infrared （FTIR） spectrometry were used to characterize these nanoparticles, and the morphologies of the HA particles were observed by transmission electron microscopy （TEM）. The results demonstrate that shorter rod-like HA particles can be prepared by adding cetyltrimethylammonium bromide （CTAB）, as the additive of CTAB can block the HA crystal growth along with c-axis. And whisker HA particles are obtained by adding ethylenediamine tetraacetic acid （EDTA）, since EDTA may have effect on the dissolution-repreeipitation process of HA.
基金Project(51305317)supported by the National Natural Science Foundation of ChinaProjects(WUT:2013-IV-092,WUT:2014-VII-002)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(IRT13087)supported by Innovative Research Team Development Program of Ministry of Education of China
文摘The fracture behaviour and morphologies of high-strength boron steel were investigated at different temperatures at a constant strain rate of 0.1 s-1 based on isothermal tensile tests. Fracture mechanisms were also analyzed based on the relationship between microstructure transformation and continuous cooling transformation(CCT) curves. It is found that 1) fractures of the investigated steel at high temperatures are dimple fractures; 2) the deformation of high-strength boron steel at high temperatures accelerates diffusion transformations; thus, to obtain full martensite, a higher cooling rate is needed; and 3) the investigated steel has the best plasticity when the deformation temperature is 750 °C.
文摘Stegolophodon is an age-informative genus of mammals that had a widespread distribution during the Neogene.This paper reports the discovery of Stegolophodon fossils from the Middle Miocene lower Fotan Formation at the Zhangpu locality,Fujian Province,China.This discovery represents the first evidence of Neogene proboscidean fossils in southeastern China.The newly found molar materials have low tooth crowns,very straight lophs/lophids,and an indistinct median sulcus.The mesoconelets and posterior cingulum are well-developed,while the second posterior pretrite central conule is significantly reduced.These specimens closely resemble Stegolophodon pseudolatidens in cheek tooth morphology,and can thus be attributed to the same species.This discovery fills a gap in the fossil record of large mammals in this region during the Neogene and provides valuable insights into the evolution of proboscideans and paleoenvironments.
基金supported by the National Natural Science Foundation of China(22376063,21976057)the Fund of the National Engineering Laboratory for Mobile Source Emission Control Technology(NELMS2020A05)Fundamental Research Funds for the Central Universities.
文摘The preferential oxidation of CO(CO-PROX)reaction is a cost-effective method for eliminating trace amounts of CO from the fuel H2.Pt-based catalysts have been extensively studied for COPROX,with their activity influenced by the morphology of the support.Hydrothermal synthesis was employed to produce different morphologies ofγ-Al_(2)O_(3):flower-likeγ-Al_(2)O_(3)(f)exposing(110)crystal faces,sheet-likeγ-Al_(2)O_(3)(s)revealing(100)crystal faces,and rod-likeγ-Al_(2)O_(3)(r)displaying(111)crystal faces,followed by loading PtCo nanoparticles.The exposed crystal faces of the support impact the alloying degree of the PtCo nanoparticles,and an increase in the alloying degree correlates with enhanced catalyst reactivity.Pt_(3)Co intermetallic compounds were identified onγ-Al_(2)O_(3)(f)exposing(110)crystal faces,and PtCo/γ-Al_(2)O_(3)(f)showed high catalytic activity in the CO-PROX reaction,achieving 100%CO conversion across a broad temperature range of 50−225°C.In contrast,only partial alloying of PtCo was observed onγ-Al_(2)O_(3)(s).Furthermore,no alloying between Pt and Co occurred in PtCo/γ-Al_(2)O_(3)(r),resulting in a reaction rate at 50°C that was merely 11%of that of PtCo/γ-Al_(2)O_(3)(f).The formation of Pt3Co intermetallic compounds led to a more oxidized state of Pt,which significantly diminished the adsorption of CO on Pt and augmented the active oxygen species,thereby facilitating the selective oxidation of CO.
文摘The East China Sea(ECS)off the Coast of Zhoushan Archipelago,Zhejiang(ECS-CZA)is home to abundant fishery resources and an important spawning,feeding,and nursing ground for a variety of fish species.Due to long-term overfishing,the ichthyoplankton structure has been dramatically altered.Understanding the species composition and distribution of fish eggs and larvae is one of the most essential tasks to accurately regulate fishery resources and formulate effective management policies;however,little is known about the ichthyoplankton in this region.In this study,an integrated strategy of morphology identification(MI)and mitochondrial COI DNA barcoding was used to identify species of fish eggs and larvae collected from the ECSCZA.MI revealed 15 fish egg species belonging to 12 families and 12 fish larva species belonging to 12 families;in contrast,DNA barcoding altogether identified 30 species,including 18 fish egg species and 13 fish larva species.One species was shared between the egg and larva samples.Our study offers useful tools and critical scientific information for further understanding the diversity,distribution,and conservation management of various ichthyoplankton species in the marine environment.
基金Project(2024JJ2074) supported by the Natural Science Foundation of Hunan Province,ChinaProject(22376221) supported by the National Natural Science Foundation of ChinaProject(2023QNRC001) supported by the Young Elite Scientists Sponsorship Program by CAST,China。
文摘Driven by rapid technological advancements and economic growth,mineral extraction and metal refining have increased dramatically,generating huge volumes of tailings and mine waste(TMWs).Investigating the morphological fractions of heavy metals and metalloids(HMMs)in TMWs is key to evaluating their leaching potential into the environment;however,traditional experiments are time-consuming and labor-intensive.In this study,10 machine learning(ML)algorithms were used and compared for rapidly predicting the morphological fractions of HMMs in TMWs.A dataset comprising 2376 data points was used,with mineral composition,elemental properties,and total concentration used as inputs and concentration of morphological fraction used as output.After grid search optimization,the extra tree model performed the best,achieving coefficient of determination(R2)of 0.946 and 0.942 on the validation and test sets,respectively.Electronegativity was found to have the greatest impact on the morphological fraction.The models’performance was enhanced by applying an ensemble method to the top three optimal ML models,including gradient boosting decision tree,extra trees and categorical boosting.Overall,the proposed framework can accurately predict the concentrations of different morphological fractions of HMMs in TMWs.This approach can minimize detection time,aid in the safe management and recovery of TMWs.
基金Project(41877240)supported by the National Natural Science Foundation of China。
文摘As a typical sedimentary soft rock,mudstone has the characteristics of being easily softened and disintegrated under the effect of wetting and drying(WD).The first cycle of WD plays an important role in the entire WD cycles.X-ray micro-computed tomography(micro-CT)was used as a non-destructive tool to quantitatively analyze microstructural changes of the mudstone due to the first cycle of WD.The test results show that WD leads to an increase of pore volume and pore connectivity in the mudstone.The porosity and fractal dimension of each slice of mudstone not only increase in value,but also in fluctuation amplitude.The pattern of variation in the frequency distribution of the equivalent radii of connected,isolated pores and pore throats in mudstone under WD effect satisfies the Gaussian distribution.Under the effect of WD,pores and pore throats with relatively small sizes increase the most.The sphericity of the pores in mudstones is positively correlated with the pore radius.The WD effect transforms the originally angular and flat pores into round and regular pores.This paper can provide a reference for the study of the deterioration and catastrophic mechanisms of mudstone under wetting and drying cycles.
基金funded by Shaanxi Provincial Key Research and Development Program of China(Grant No.2021ZDLGY11)partially supported by NSAF Project of China(Grant No.U2030202)。
文摘Boron has high mass and volume calorific values,but it is difficult to ignite and has low combustion efficiency.This literature review summarizes the strategies that are used to solve the above-mentioned problems,which include coatings of boron by using fluoride compounds,energetic composites,metal fuels,and metal oxides.Coating techniques include recrystallization,dual-solvent,phase transfer,electrospinning,etc.As one of the effective coating agents,the fluorine compounds can react with the oxide shell of boron powder.In comparison,the energetic composites can effectively improve the flame temperature of boron powder and enhance the evaporation efficiency of oxide film as a condensed product.Metals and metal oxides would react with boron powder to form metal borides with a lower ignition point,which could reduce its ignition temperature.
文摘Boehmeria nivea var.strigosa Zeng Y.Wu&Y.Zhao,a new variety of B.nivea(Urticaceae)from Southwest China,is here described based on evidence from morphology and molecular phylogeny.This new variety is mainly characterized by its green abaxial leaf blade,partly connate stipules,and densely patent strigose hairs on stems and potioles.The phylogenetic analysis based on rbc L,nrDNA and rbc L+nrDNA datasets,revealed that all individuals of B.nivea var.strigosa formed a monophyletic group.The conservation status of B.nivea var.strigosa is assessed as“Near Threatened”(NT)according to IUCN evaluation criteria.The discovery of this new variety is not only crucial for the taxonomy of ramie,but also provides reference for the exploration and utilization of ramie.
文摘Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while extending their lifespan.This paper explores the application of laser-assisted water jet technology in constructing high-quality micro-trap structures on 316L stainless steel,a key material in accelerator manufacturing.The study systematically analyzes the impact of various parameters such as laser repetition frequency,pulse duration,average power,water jet pressure,repeat times,nozzle offset,focal position,offset distance between grooves,and processing speed on the surface morphology of stainless steel.The findings reveal that micro-groove depth increases with higher laser power but decreases with increasing water jet pressure and processing speed.Interestingly,repeat times have minimal effect on depth.On the other hand,micro-groove width increases with higher laser power and repeat times but decreases with processing speed.By optimizing these parameters,the researchers achieved high-quality pound sign-shaped trap structure with consistent dimensions.We tested the secondary electron emission coefficient of the"well"structure.The coefficient is reduced by 0.5 at most compared to before processing,effectively suppressing secondary electron emission.These results offer indispensable insights for the fabrication of micro-trap structures on material surfaces.Laser-assisted water jet technology demonstrates considerable potential in mitigating SEE on metal surfaces.
文摘Elymus duthiei(Melderis)G.Singh,newly recorded from Xizang,China,is described and illustrated in detail.Morphologically,the species is similar to E.anthosachnoides(Keng)Á.Löve ex B.R.Lu and E.glaberrimus(Keng&S.L.Chen)S.L.Chen but differs from the former in height and diameter of culms,number of nodes,width of leaf blades,and type of trichome and size of spikelets,and from the latter in distribution,height of culms,type of trichome of spikelets,and awn length.Detailed photo plates,descriptions,and distribution data are provided.
文摘The early Silurian Chongqing Lagerstätte(middle Telychian)yields exceptionally preserved articulated jawless and jawed fishes.Here,we describe a new eugaleaspiform(Galeaspida,jawless stem-Gnathostomata),Miaojiaaspis dichotomus gen.et sp.nov.,from the Chongqing Lagerstätte in Xiushan,Chongqing,China.The new form resembles Tujiaaspis vividus in the short medial dorsal canal,and the presence of the branching ends of the lateral transverse canal.They differ in that T.vividus has highly developed subordinate branches of the sensory canals that form a reticulate sensory canal system,and the median dorsal opening is more elongated.Our phylogenetic analysis recovers M.dichotomus and T.vividus as a monophyletic clade(Tujiaaspidae fam.nov.),which is supported by two synapomorphies:the short medial dorsal canal,and the branching ends of the lateral transverse canal.Tujiaaspidae forms a trichotomy with Shuyuidae and a clade comprising Anjiaspis,Sinogaleaspidae,Yongdongaspidae,and the‘eugaleaspid cluster’.The sensory canal patterns in galeaspids are compared to show the transformation sequence of the sensory canal system in Eugaleaspiformes.
文摘The hydrogen evolution reaction(HER)is a promising way to produce hydrogen,and the use of non-precious metals with an excellent electrochemical performance is vital for this.Carbon-based transition metal catalysts have high activity and stability,which are important in reducing the cost of hydrogen production and promoting the development of the hydrogen production industry.However,there is a lack of discussion regarding the effect of carbon components on the performance of these electrocatalysts.This review of the literature discusses the choice of the carbon components in these catalysts and their impact on catalytic performance,including electronic structure control by heteroatom doping,morphology adjustment,and the influence of self-supporting materials.It not only analyzes the progress in HER,but also provides guidance for synthesizing high-performance carbon-based transition metal catalysts.
基金supported by the Fund for the Biological Breeding-Major Projects in National Science and Technology(2023ZD04038)the Key Project for Agricultural Breakthrough in Core Technology of Xinjiang Production and Construction Crops(NYHXGG,2023AA102)the Key Project for Science and Technology Development of Shihezi city,Xinjiang Production and Construction Crops(2022NY01)。
文摘Background Understanding the mechanism of male sterility is crucial for producing hybrid seeds and developing sterile germplasm resources.However,only a few cytoplasmic male sterility(CMS)lines of cotton have been produced due to several challenges,like inadequate variation of agronomic traits,incomplete sterility,weak resilience of restorer lines,and difficulty in combining strong dominance.Therefore,the morphological and cytological identification of CMS in cotton will facilitate hybrid breeding.Results Two F_(2) segregating populations of cotton were constructed from cytoplasmic male sterile lines(HaA and 01A,maternal)and restorer lines(HaR and 26R,paternal).Genetic analysis of these populations revealed a segregation ratio of 3:1 for fertile to sterile plants.Phenotypic analysis indicated no significant differences in traits of flower bud development between sterile and fertile plants.However,sterile plants exhibited smaller floral organs,shortened filament lengths,and anther atrophy on the flowering day in comparison with the fertile plants.When performed scanning electron microscopy(SEM),the two F_(2) populations revealed morphological variations in the anther epidermis.Cellular analysis showed no significant differences in pollen development before pollen maturation.Interestingly,between the pollen maturation and flowering stages,the tapetum layer of sterile plants degenerated prematurely,resulting in abnormal pollen grains and gradual pollen degradation.Conclusion The results of this study suggest that fertility-restoring genes are controlled by a single dominant gene.Sterile plants exhibit distinctive floral morphology,which is characterized by stamen atrophy and abnormal anthers.Pollen abortion occurs between pollen maturity and flowering,indicating that premature tapetum degradation may be the primary cause of pollen abortion.Overall,our study provides a theoretical basis for utilizing CMS in hybrid breeding and in-depth investigation of the dominant configuration of cotton hybrid combinations,mechanisms of sterility,and the role of sterile and restorer genes.
文摘The Asiatic hybrid lily cultivar Lilium dazzling(family Liliaceae)is a perennial herbaceous bulbous plant with bright yellow flowers of ornamental values.It also shows resistance to diseases and abiotic stress,making it an ideal parent for breeding studies.This study established a sterile culture system using scales of dazzling lily as explants to induce polyploidy.Adventitious buds growing to 1 cm were treated with different concentrations of colchicine(125,250 and 500μmol·L-1),pendimethalin or trifluralin(100,200 and 300μmol·L-1,respectively)for 12,24 and 36 h.Flow cytometry and chromosome counting were used to identify ploidy,and the phenotype of the polyploids was examined by stomatal observation and leaf index determination.With increasing mutagen concentration and exposure time,the mortality and mutagenic rate increased.The optimal treatment group was:300μmol·L-1 trifluralin for 12 h,which resulted in 15.55%mortality rate and 42.22%induction rate.The polyploid plants showed a significant increase in stomata length,leaf length and leaf width,with a decrease in stomatal density compared with the control plants.This study provided a basis for polyploid breeding.
基金Projects(52125306,21875286)supported by the National Natural Science Foundation of China。
文摘Ternary strategy has demonstrated great potential in promoting the power conversion efficiency(PCE)of bulk heterojunction organic solar cells(BHJ OSCs).Two new polymer donors,TPQ-2 F-2 Cl and TPQ-2 F-4 F,were synthesized with chlorinated and fluorinated aromatic side chains,respectively,which contributed to distinct noncovalent interactions.Compared with the PM 6:L 8-BO host system,the TPQ-2 F-2 Cl based ternary OSCs obtained enhanced exciton dissociation and more balanced carrier mobility.Moreover,benefiting from the favorable miscibility of the PM 6:L 8-BO:TPQ-2 F-2 Cl blend,the ternary blending film featured a well-defined fibrillar morphology and improved molecular ordering.Consequently,the optimal PM 6:L 8-BO:TPQ-2 F-2 Cl device achieved a more outstanding PCE of 18.2%,a higher open circuit voltage(V_(oc)),and a better fill factor(FF)in comparison with the binary device(PCE=17.7%).In contrast,the addition of TPQ-2 F-4 F would generate excessive aggregation of blend,thereby reducing the PCE of ternary OSCs(16.0%).This work shows a promising idea for designing efficient third component donor polymers.
基金Project(22408404)supported by the National Natural Science Foundation of China。
文摘The development of high-performance non-fullerene acceptors with extended exciton diffusion lengths has positioned the sequential layer-by-layer(LBL)solution processing technique as a promising approach for fabricating high-performance and large-area organic solar cells(OSCs).This method allows for the independent dissolution and deposition of donor and acceptor materials,enabling precise morphology control.In this review,we provide a comprehensive overview of the LBL processing technique,focusing on the morphology of the active layer.The swelling intercalation phase-separation(SIPS)model is introduced as the mainstream theory of morphology evolution,with a detailed discussion on vertical phase separation.We summarize recent strategies for morphology optimization.Additionally,we review the progress in LBL-based large-area device and module fabrication,as well as green processing approaches.Finally,we highlight current challenges and future prospects,paving the way for the commercialization of LBL-processed OSCs.
