The high and steep slopes along a high-speed railway in the mountainous area of Southwest China are mostly composed of loose accumulations of debris with large internal pores and poor stability,which can easily induce...The high and steep slopes along a high-speed railway in the mountainous area of Southwest China are mostly composed of loose accumulations of debris with large internal pores and poor stability,which can easily induce adverse geological disasters under rainfall conditions.To ensure the smooth construction of the high-speed railway and the subsequent safe operation,it is necessary to master the stability evolution process of the loose accumulation slope under rainfall.This article simulates rainfall using the finite element analysis software’s hydromechanical coupling module.The slope stability under various rainfall situations is calculated and analysed based on the strength reduction method.To validate the simulation results,a field monitoring system is established to study the deformation characteristics of the slope under rainfall.The results show that rainfall duration is the key factor affecting slope stability.Given a constant amount of rainfall,the stability of the slope decreases with increasing duration of rainfall.Moreover,when the amount and duration of rainfall are constant,continuous rainfall has a greater impact on slope stability than intermittent rainfall.The setting of the field retaining structures has a significant role in improving slope stability.The field monitoring data show that the slope is in the initial deformation stage and has good stability,which verifies the rationality of the numerical simulation method.The research results can provide some references for understanding the influence of rainfall on the stability of loose accumulation slopes along high-speed railways and establishing a monitoring system.展开更多
We determined the effects of adhesive type and loose tenon dimensions （length and thickness） on bending strength of T-shaped mor- tise and loose-tenon joints. Polyvinyl acetate （PVAc） and two-component polyuretha...We determined the effects of adhesive type and loose tenon dimensions （length and thickness） on bending strength of T-shaped mor- tise and loose-tenon joints. Polyvinyl acetate （PVAc） and two-component polyurethane （PU） adhesives were used to construct joint specimens. The bending moment capacity of joints increased significantly with increased length and thickness of the loose tenon. Bending moment capacity of joints constructed with PU adhesive was approximately 13% higher than for joints constructed with PVAc adhesive. We developed a predictive equation as a function of adhesive type and loose tenon dimensions to estimate the strength of the joints constructed of oriental beech （Fagus orientalis L.） under uniaxial bending load.展开更多
An effective method for preventing spontaneous combustion of coal stockpiles on the ground is to control the air-flow in loose coal. In order to determine and predict accurately oxygen concentrations and temperatures ...An effective method for preventing spontaneous combustion of coal stockpiles on the ground is to control the air-flow in loose coal. In order to determine and predict accurately oxygen concentrations and temperatures within coal stockpiles, it is vital to obtain information of self-heating conditions and tendencies of spontaneous coal combustion. For laboratory conditions, we designed our own experimental equipment composed of a control-heating system, a coal column and an oxygen concentration and temperature monitoring system, for simulation of spontaneous combustion of block coal （13-25 mm） covered with fine coal （0-3 mm）. A BP artificial neural network （ANN） with 150 training samples was gradually established over the course of our experiment. Heating time, relative position of measuring points, the ratio of fine coal thickness, artificial density, voidage and activation energy were selected as input variables and oxygen concentration and temperature of coal column as output variables. Then our trained network was applied to predict the trend on the untried experimental data. The results show that the oxygen concentration in the coal column could be reduced below the minimum still able to induce spontaneous combustion of coal - 6% by covering the coal pile with fine coal, which would meet the requirement to prevent spontaneous combustion of coal stockpiles. Based on the prediction of this ANN, the average errors of oxygen concentration and temperature were respectively 0.5% and 7 ℃, which meet actual tolerances. The implementation of the method would provide a practical guide in understanding the course of self-heating and spontaneous combustion of coal stockpiles.展开更多
The dynamic ground subsidence due to underground mining is a complicated time-dependent and rate- dependent process. Based. on the theory of rock rheology and probability integral method, this study developed the supe...The dynamic ground subsidence due to underground mining is a complicated time-dependent and rate- dependent process. Based. on the theory of rock rheology and probability integral method, this study developed the superposltlOn model for the prediction and analysis of the ground dynamic subsidence in mining area of thick !oose layer. The model consists of two parts （the prediction of overlying bedrock and the prediction of thick loose layer）. The overlying bedrock is regarded as visco-elastic beam, of which the dynamic subsidence is predicted by the Kelvin visco-elastic rheological model. The thick loose layer is regarded as random medium, and the ground dynamic subsidence, is predicted by the probability integral model. At last, the two prediction models are vertically stacked in the same coordinate system, and the bedrock dynamic subsidence is regarded as a variable mining thickness input into the prediction model of ground dynamic subsidence. The prediction results obtained were compared w^th actual movement and deformation data from Zhao I and Zhao II mine, central China. The agreement of the prediction results with the. field measurements.show that the superposition model （SM） is more satisfactory and the formulae obtained are more effective than the classical single probability Integral model（SPIM）, and thus can be effectively used for predicting the ground dynamic subsidence in mining area of thick loose layer.展开更多
We studied the effect of loose tenon dimensions on stress and strain distributions in T-shaped mortise and loose tenon （M＆amp;LT） furni-ture joints under uniaxial bending loads, and determined the effects of loose ...We studied the effect of loose tenon dimensions on stress and strain distributions in T-shaped mortise and loose tenon （M＆amp;LT） furni-ture joints under uniaxial bending loads, and determined the effects of loose tenon length （30, 45, 60, and 90 mm） and loose tenon thickness （6 and 8 mm） on bending moment capacity of M＆amp;LT joints constructed with polyvinyl acetate （PVAc） adhesive. Stress and strain distributions in joint elements were then estimated for each joint using ANSYS finite element （FE） software. The bending moment capacity of joints increased significantly with thickness and length of the tenon. Based on the FE analysis results, under uniaxial bending, the highest shear stress values were obtained in the middle parts of the tenon, while the highest shear elastic strain values were estimated in glue lines between the tenon sur-faces and walls of the mortise. Shear stress and shear elastic strain values in joint elements generally increased with tenon dimensions and corre-sponding bending moment capacities. There was consistency between predicted maximum shear stress values and failure modes of the joints.展开更多
For deep mining engineering, heat transfer of coal mass is a vital factor in the thermal environment of coal mines. In order to study the thermal conduction mechanism, we obtained gray images of coal mass microstructu...For deep mining engineering, heat transfer of coal mass is a vital factor in the thermal environment of coal mines. In order to study the thermal conduction mechanism, we obtained gray images of coal mass microstructure by scanning samples with a digital microscope. With the use of Matlab, these gray images were transformed into binary images, which were then transformed into a corresponding matrix consisting only of the values 0 and 1. According to the calculation method of box-counting dimension, we calculated the fractal dimension of the loose coal to be approximately 1.86. The thermal conductivity expressions of loose coal were derived based on the simulation method of thermal resistance. We calculated the thermal conductivity of loose coal by using a fractal model and compared the calculated values with our experimental data. The results show that the test data show an encourag-ing agreement with the calculated values. Hence fractal theory is a feasible method for studying thermal conductivity of loose coal.展开更多
In the separation process with a jig washer, an accurate on-line measurement of loose status of a jigging bed is essential for a successful control of coal quality and loose status is difficult to measure on-line dire...In the separation process with a jig washer, an accurate on-line measurement of loose status of a jigging bed is essential for a successful control of coal quality and loose status is difficult to measure on-line directly in industrial process situations. So a soft-sensor technology is needed for this purpose. The soft-sensor model is developed in the experiment by an adaptive neuro-fuzzy inference system （ANFIS） which has a remarkable ability of learning and generalization. Based on the analysis of the technologic mechanism of jigging bed, the structure of the ANFIS is established to build the soft-sensor model of loose status estimation. The ANFIS is trained by a hybrid learning algorithm. Finally, the simulation results and comparison analysis are presented, which indicate that the ANFIS has better abilities of learning and generalization than the RBF and the BP networks. Thus, it is possible that the loose status of the jigging bed can be estimated on-line bv using ANFIS.展开更多
Random loose packing is the minimum-density granular packing which can maintain mechanical stability. In this study, x-ray tomography is used to investigate the internal structure of an isotropically prepared random l...Random loose packing is the minimum-density granular packing which can maintain mechanical stability. In this study, x-ray tomography is used to investigate the internal structure of an isotropically prepared random loose packing through a special apparatus to minimize the effect of gravity. It is found that the minimum packing density is around 0.587. The microscopic structural analysis of the packing is also carried out.展开更多
This paper mainly describes that loose of jig bed affects jig's separation effect, and the corresponding fuzzy rules were built. Using the evaluating index of jig's separation effect--imperfection (I) and tota...This paper mainly describes that loose of jig bed affects jig's separation effect, and the corresponding fuzzy rules were built. Using the evaluating index of jig's separation effect--imperfection (I) and total misplaced material (Cz), it evaluates status of loose of jig bed by fuzzy inference system. Experimental simulation and applications in practice prove the method's feasibility.展开更多
By foaming and carbonization processes under atmospheric pressure, a novel thin-walled carbon foam with developed foam structure was successfully prepared from loose medium component(LMC) separated from raw coal by ex...By foaming and carbonization processes under atmospheric pressure, a novel thin-walled carbon foam with developed foam structure was successfully prepared from loose medium component(LMC) separated from raw coal by extraction and back-extraction method. The influences of foaming time, carbonization time, and micromolecule content on foam structure were investigated by scanning electron microscope and mercury injection data. Moreover, foaming mechanism of LMC was analyzed and expounded. The results showed that spherical pores and uniform ultrathin pore walls constitute threedimensional foam structure of carbon foam and foam structure is developed with well connectivity.The effects of foaming time, carbonization time, and micromolecule content on foam structure are significant. Especially, average pore diameters of carbon foams prepared from the extracts of LMC are much smaller. With the rise of extraction rate, average pore diameter decreases and pore size distribution is more concentrated on the aperture section of 0–10 μm.展开更多
Multiple unmanned aerial vehicles(UAVs)cooperative operation is the main form for UAVs fighting in battlefield,and multi-UAV mission rendezvous is the premise of cooperative reconnaissance and attack missions.We propo...Multiple unmanned aerial vehicles(UAVs)cooperative operation is the main form for UAVs fighting in battlefield,and multi-UAV mission rendezvous is the premise of cooperative reconnaissance and attack missions.We propose a rendezvous control strategy,which divides the rendezvous process into two parts:The loose formation rendezvous and the close formation rendezvous.In the first stage,UAVs are supposed to reach the specific target locations simultaneously and form a loose formation.A distributed control strategy based on first-order consensus algorithm is presented to achieve this goal.Then the second stage is designed based on the second-order consensus algorithm to complete the transition from the loose formation to the close formation.This process needs the speeds and heading angles of UAVs to reach an agreement.Besides,control algorithms with a virtual leader are proposed,by which the formation states can reach a specific value.Finally,simulation results show that the control algorithms are capable of realizing the mission rendezvous of multi-UAV and the consistence of UAVs′final states,which verify the effectiveness and feasibility of the designed control strategy.展开更多
Sand production from loosely consolidated reservoirs is one of the critical issues in the oil and gas in-dustry all around the world that can cause many problems,such as erosion of surface and well equip-ment,sand acc...Sand production from loosely consolidated reservoirs is one of the critical issues in the oil and gas in-dustry all around the world that can cause many problems,such as erosion of surface and well equip-ment,sand accumulation in wells and operation facilities,buckling of casing in cased-hole wells and well productivity reduction.Sand production control methods include restrictive production rate,mechanical methods(slotted liner,wire-wrapped screen,pre-packed screen,frac-pack,gravel pack,high-rate water pack)and chemical consolidation that chemical method is considered for more effectiveness in sand production alleviation due to increasing formation strength in near wellbore region.This review provides an overview on the laboratory and filed operation investigations of chemical remedy for sand production.Some used chemical agents and more common laboratory tests for evaluating the chemical performance in sand consolidation are introduced in this paper.Furthermore,the results of field operations and in-jections of chemicals into the desired formation are also reported.These results show that the chemical sand consolidation is more effective in newly perforated wells which have no sand production experi-ence and have a production history of less than two years.Finally,it was concluded that the main challenges in applying this method are permeability and capillary force reduction around the wellbore and selective injection into the targeted formation layers.展开更多
Aimed at determining the appropriate caving–mining ratio for fully mechanized mining of 20 m thick coal seam, this research investigated the effects of caving–mining ratio on the flow fields of coal and waste rocks,...Aimed at determining the appropriate caving–mining ratio for fully mechanized mining of 20 m thick coal seam, this research investigated the effects of caving–mining ratio on the flow fields of coal and waste rocks, amount of cyclically caved coal and top coal loss by means of numerical modeling. The research was based on the geological conditions of panel 8102 in Tashan coal mine. The results indicated the loose coal and waste rocks formed an elliptical zone around the drawpoint. The ellipse enlarged with decreasing caving–mining ratio. And its long axis inclined to the gob gradually became vertical and facilitating the caving and recovery of top coal. The top coal loss showed a cyclical variation; and the loss cycle was shortened with the decreasing in caving–mining ratio. Moreover, the mean squared error(MSE) of the amount of cyclically caved coal went up with increasing caving–mining ratio, indicating a growing imbalance of amount of cyclically caved coal, which could impede the coordinated mining and caving operations. Finally it was found that a caving–mining ratio of 1:2.51 should be reasonable for the conditions.展开更多
The deep, loose bottom aquifer of the eastern air shaft in the Xinglongzhuang Coal Mine was used to develop an experimental model of shaft grouting through Model deep soil. Lab experiments using chem- ical grouting we...The deep, loose bottom aquifer of the eastern air shaft in the Xinglongzhuang Coal Mine was used to develop an experimental model of shaft grouting through Model deep soil. Lab experiments using chem- ical grouting were done to study the grout. The grouted soil shapes and osmotic pressure were measured during the experiments. The tested characteristics of the grouted soil show that the diffusion mode of grout in saturated sandy soil is a combination of split compaction and osmosis. More specifically, the shape of the grouted soil is determined by split compaction while the size of the grouted soil shape is determined by osmosis. Sensor test results indicate that the main reason for the non-uniform grout diffusion is the anisotropic osmotic pressure field surrounding the grouting holes.展开更多
英语中一部分单词加上前缀in-或un-,可表示“不”、“无”、“非”等否定含义。它们与其同形的词根在意义上通常构成反义,如:correct/incorrect(正确的/不正确的);close/unclose(关、闭/打开)等。但是,有些由前缀in-或un-构成的派生词...英语中一部分单词加上前缀in-或un-,可表示“不”、“无”、“非”等否定含义。它们与其同形的词根在意义上通常构成反义,如:correct/incorrect(正确的/不正确的);close/unclose(关、闭/打开)等。但是,有些由前缀in-或un-构成的派生词却并无否定意义。它们与原词根貌似反义,实则同义或近义,使用时切勿望文生义。如: 1.habit vt.居住在 inhabit vt.居住于 1)They had habited different parts of the globe. 他们曾在世界各地住过。展开更多
This essay centralizes on the analysis of the writing skills,the theme and my personal insights of Sons and Lovers,as well as my interpretation of the mother-son relationship in terms of feminism.Overall,hope it will ...This essay centralizes on the analysis of the writing skills,the theme and my personal insights of Sons and Lovers,as well as my interpretation of the mother-son relationship in terms of feminism.Overall,hope it will provide a specific perspective of this renowned novel and arouse the readers'attention to interpret the novel themselves.展开更多
For accurate aeroelastic analysis,the unsteady rotor flowfield is solved by computational fluid dynamics(CFD)module based on RANS/Euler equations and moving-embedded grid system,while computational structural dynamics...For accurate aeroelastic analysis,the unsteady rotor flowfield is solved by computational fluid dynamics(CFD)module based on RANS/Euler equations and moving-embedded grid system,while computational structural dynamics(CSD)module is introduced to handle blade flexibility.In CFD module,dual time-stepping algorithm is employed in temporal discretization,Jameson two-order central difference(JST)scheme is adopted in spatial discretization and B-L turbulent model is used to illustrate the viscous effect.The CSD module is developed based on Hamilton′s variational principles and moderate deflection beam theory.Grid deformation is implemented using algebraic method through coordinate transformations to achieve deflections with high quality and efficiency.A CFD/CSD loose coupling strategy is developed to transfer information between rotor flowfield and blade structure.The CFD and the CSD modules are verified seperately.Then the CFD/CSD loose coupling is adopted in airloads prediction of UH-60A rotor under high speed forward flight condition.The calculated results agree well with test data.Finally,effects of torsional stiffness properties on airloads of rotors with different tip swept angles(from 10° forward to 30° backward)are investigated.The results are evaluated through pressure distribution and airloads variation,and some meaningful conclusions are drawn the moderated shock wave strength and pressure gradient caused by varied tip swept angle and structural properties.展开更多
The potential energy function of nitrogen dioxide with the C2v symmetry in the ground state is represented using the simplified Sorbie-Murrell many-body expansion function in terms of the symmetry of NO2. Using the po...The potential energy function of nitrogen dioxide with the C2v symmetry in the ground state is represented using the simplified Sorbie-Murrell many-body expansion function in terms of the symmetry of NO2. Using the potential energy function, some potential energy surfaces of NO2（C2v, X^-^2A1）, such as the bond stretching contour plot for a fixed equilibrium geometry angle θ and contour for O moving around N-O （R1）, in which R1 is fixed at the equilibrium bond length, are depicted. The potential energy surfaces are analysed. Moreover, the equilibrium parameters for NO2 with the C2v, Cs and Dsn symmetries, such as equilibrium geometry structures and energies, are calculated by the ab initio （CBS-Q） method.展开更多
除了动词 be 常作连系动词以外,还有一些行为动词可用作连系动词,其中come 和 go 所接作表语的形容词略有不同的特点,值得注意。一般说来,come 与 go 作系动词,都含“变为”之意,然而come后的形容词表语常指令说话人“感到满意或开心”...除了动词 be 常作连系动词以外,还有一些行为动词可用作连系动词,其中come 和 go 所接作表语的形容词略有不同的特点,值得注意。一般说来,come 与 go 作系动词,都含“变为”之意,然而come后的形容词表语常指令说话人“感到满意或开心”的结果,go 后的形容词表语多表“令人不快或沮丧”的场合,请比较下面实例:展开更多
基金supported by the National Natural Science Foundation of China (No.51978588).
文摘The high and steep slopes along a high-speed railway in the mountainous area of Southwest China are mostly composed of loose accumulations of debris with large internal pores and poor stability,which can easily induce adverse geological disasters under rainfall conditions.To ensure the smooth construction of the high-speed railway and the subsequent safe operation,it is necessary to master the stability evolution process of the loose accumulation slope under rainfall.This article simulates rainfall using the finite element analysis software’s hydromechanical coupling module.The slope stability under various rainfall situations is calculated and analysed based on the strength reduction method.To validate the simulation results,a field monitoring system is established to study the deformation characteristics of the slope under rainfall.The results show that rainfall duration is the key factor affecting slope stability.Given a constant amount of rainfall,the stability of the slope decreases with increasing duration of rainfall.Moreover,when the amount and duration of rainfall are constant,continuous rainfall has a greater impact on slope stability than intermittent rainfall.The setting of the field retaining structures has a significant role in improving slope stability.The field monitoring data show that the slope is in the initial deformation stage and has good stability,which verifies the rationality of the numerical simulation method.The research results can provide some references for understanding the influence of rainfall on the stability of loose accumulation slopes along high-speed railways and establishing a monitoring system.
文摘We determined the effects of adhesive type and loose tenon dimensions （length and thickness） on bending strength of T-shaped mor- tise and loose-tenon joints. Polyvinyl acetate （PVAc） and two-component polyurethane （PU） adhesives were used to construct joint specimens. The bending moment capacity of joints increased significantly with increased length and thickness of the loose tenon. Bending moment capacity of joints constructed with PU adhesive was approximately 13% higher than for joints constructed with PVAc adhesive. We developed a predictive equation as a function of adhesive type and loose tenon dimensions to estimate the strength of the joints constructed of oriental beech （Fagus orientalis L.） under uniaxial bending load.
文摘An effective method for preventing spontaneous combustion of coal stockpiles on the ground is to control the air-flow in loose coal. In order to determine and predict accurately oxygen concentrations and temperatures within coal stockpiles, it is vital to obtain information of self-heating conditions and tendencies of spontaneous coal combustion. For laboratory conditions, we designed our own experimental equipment composed of a control-heating system, a coal column and an oxygen concentration and temperature monitoring system, for simulation of spontaneous combustion of block coal （13-25 mm） covered with fine coal （0-3 mm）. A BP artificial neural network （ANN） with 150 training samples was gradually established over the course of our experiment. Heating time, relative position of measuring points, the ratio of fine coal thickness, artificial density, voidage and activation energy were selected as input variables and oxygen concentration and temperature of coal column as output variables. Then our trained network was applied to predict the trend on the untried experimental data. The results show that the oxygen concentration in the coal column could be reduced below the minimum still able to induce spontaneous combustion of coal - 6% by covering the coal pile with fine coal, which would meet the requirement to prevent spontaneous combustion of coal stockpiles. Based on the prediction of this ANN, the average errors of oxygen concentration and temperature were respectively 0.5% and 7 ℃, which meet actual tolerances. The implementation of the method would provide a practical guide in understanding the course of self-heating and spontaneous combustion of coal stockpiles.
基金provided by the National Natural Science Foundation of China Youth Found of China (No.41102169)the doctoral foundation of Henan Polytechnic University of China (No. B2014-056)
文摘The dynamic ground subsidence due to underground mining is a complicated time-dependent and rate- dependent process. Based. on the theory of rock rheology and probability integral method, this study developed the superposltlOn model for the prediction and analysis of the ground dynamic subsidence in mining area of thick !oose layer. The model consists of two parts （the prediction of overlying bedrock and the prediction of thick loose layer）. The overlying bedrock is regarded as visco-elastic beam, of which the dynamic subsidence is predicted by the Kelvin visco-elastic rheological model. The thick loose layer is regarded as random medium, and the ground dynamic subsidence, is predicted by the probability integral model. At last, the two prediction models are vertically stacked in the same coordinate system, and the bedrock dynamic subsidence is regarded as a variable mining thickness input into the prediction model of ground dynamic subsidence. The prediction results obtained were compared w^th actual movement and deformation data from Zhao I and Zhao II mine, central China. The agreement of the prediction results with the. field measurements.show that the superposition model （SM） is more satisfactory and the formulae obtained are more effective than the classical single probability Integral model（SPIM）, and thus can be effectively used for predicting the ground dynamic subsidence in mining area of thick loose layer.
文摘We studied the effect of loose tenon dimensions on stress and strain distributions in T-shaped mortise and loose tenon （M＆amp;LT） furni-ture joints under uniaxial bending loads, and determined the effects of loose tenon length （30, 45, 60, and 90 mm） and loose tenon thickness （6 and 8 mm） on bending moment capacity of M＆amp;LT joints constructed with polyvinyl acetate （PVAc） adhesive. Stress and strain distributions in joint elements were then estimated for each joint using ANSYS finite element （FE） software. The bending moment capacity of joints increased significantly with thickness and length of the tenon. Based on the FE analysis results, under uniaxial bending, the highest shear stress values were obtained in the middle parts of the tenon, while the highest shear elastic strain values were estimated in glue lines between the tenon sur-faces and walls of the mortise. Shear stress and shear elastic strain values in joint elements generally increased with tenon dimensions and corre-sponding bending moment capacities. There was consistency between predicted maximum shear stress values and failure modes of the joints.
基金support for this study, provided by the National Natural Science Foundation of China (Nos50534040 and 50974117)the Research Fund of the State Key Laboratory of Coal Resources & Mine Safety, CUMT (No07KF10)
文摘For deep mining engineering, heat transfer of coal mass is a vital factor in the thermal environment of coal mines. In order to study the thermal conduction mechanism, we obtained gray images of coal mass microstructure by scanning samples with a digital microscope. With the use of Matlab, these gray images were transformed into binary images, which were then transformed into a corresponding matrix consisting only of the values 0 and 1. According to the calculation method of box-counting dimension, we calculated the fractal dimension of the loose coal to be approximately 1.86. The thermal conductivity expressions of loose coal were derived based on the simulation method of thermal resistance. We calculated the thermal conductivity of loose coal by using a fractal model and compared the calculated values with our experimental data. The results show that the test data show an encourag-ing agreement with the calculated values. Hence fractal theory is a feasible method for studying thermal conductivity of loose coal.
基金Project 70533050 supported by National Natural Science Foundation of China, 2005037225 by Postdoctoral Science Foundation of China, [2004]300 byPostdoctoral Science Foundation of Jiangsu Province, and OC 4465 bu Young Science Foundation of China University of Mining & Technology
文摘In the separation process with a jig washer, an accurate on-line measurement of loose status of a jigging bed is essential for a successful control of coal quality and loose status is difficult to measure on-line directly in industrial process situations. So a soft-sensor technology is needed for this purpose. The soft-sensor model is developed in the experiment by an adaptive neuro-fuzzy inference system （ANFIS） which has a remarkable ability of learning and generalization. Based on the analysis of the technologic mechanism of jigging bed, the structure of the ANFIS is established to build the soft-sensor model of loose status estimation. The ANFIS is trained by a hybrid learning algorithm. Finally, the simulation results and comparison analysis are presented, which indicate that the ANFIS has better abilities of learning and generalization than the RBF and the BP networks. Thus, it is possible that the loose status of the jigging bed can be estimated on-line bv using ANFIS.
基金supported by the Thirteenth Shanghai Jiao Tong University Students Innovation Practice Plan,China(Grant No.IPP13086)the National Natural Science Foundation of China(Grant Nos.11175121,11675110,and U1432111)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20110073120073)
文摘Random loose packing is the minimum-density granular packing which can maintain mechanical stability. In this study, x-ray tomography is used to investigate the internal structure of an isotropically prepared random loose packing through a special apparatus to minimize the effect of gravity. It is found that the minimum packing density is around 0.587. The microscopic structural analysis of the packing is also carried out.
文摘This paper mainly describes that loose of jig bed affects jig's separation effect, and the corresponding fuzzy rules were built. Using the evaluating index of jig's separation effect--imperfection (I) and total misplaced material (Cz), it evaluates status of loose of jig bed by fuzzy inference system. Experimental simulation and applications in practice prove the method's feasibility.
基金supported by the National Natural Science Foundation of China (Nos. 51274201 and 51674260)the Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 20130095110006)
文摘By foaming and carbonization processes under atmospheric pressure, a novel thin-walled carbon foam with developed foam structure was successfully prepared from loose medium component(LMC) separated from raw coal by extraction and back-extraction method. The influences of foaming time, carbonization time, and micromolecule content on foam structure were investigated by scanning electron microscope and mercury injection data. Moreover, foaming mechanism of LMC was analyzed and expounded. The results showed that spherical pores and uniform ultrathin pore walls constitute threedimensional foam structure of carbon foam and foam structure is developed with well connectivity.The effects of foaming time, carbonization time, and micromolecule content on foam structure are significant. Especially, average pore diameters of carbon foams prepared from the extracts of LMC are much smaller. With the rise of extraction rate, average pore diameter decreases and pore size distribution is more concentrated on the aperture section of 0–10 μm.
基金jointly granted by the Science and Technology on Avionics Integration Laboratorythe Aeronautical Science Foundation(2016ZC15008)
文摘Multiple unmanned aerial vehicles(UAVs)cooperative operation is the main form for UAVs fighting in battlefield,and multi-UAV mission rendezvous is the premise of cooperative reconnaissance and attack missions.We propose a rendezvous control strategy,which divides the rendezvous process into two parts:The loose formation rendezvous and the close formation rendezvous.In the first stage,UAVs are supposed to reach the specific target locations simultaneously and form a loose formation.A distributed control strategy based on first-order consensus algorithm is presented to achieve this goal.Then the second stage is designed based on the second-order consensus algorithm to complete the transition from the loose formation to the close formation.This process needs the speeds and heading angles of UAVs to reach an agreement.Besides,control algorithms with a virtual leader are proposed,by which the formation states can reach a specific value.Finally,simulation results show that the control algorithms are capable of realizing the mission rendezvous of multi-UAV and the consistence of UAVs′final states,which verify the effectiveness and feasibility of the designed control strategy.
文摘Sand production from loosely consolidated reservoirs is one of the critical issues in the oil and gas in-dustry all around the world that can cause many problems,such as erosion of surface and well equip-ment,sand accumulation in wells and operation facilities,buckling of casing in cased-hole wells and well productivity reduction.Sand production control methods include restrictive production rate,mechanical methods(slotted liner,wire-wrapped screen,pre-packed screen,frac-pack,gravel pack,high-rate water pack)and chemical consolidation that chemical method is considered for more effectiveness in sand production alleviation due to increasing formation strength in near wellbore region.This review provides an overview on the laboratory and filed operation investigations of chemical remedy for sand production.Some used chemical agents and more common laboratory tests for evaluating the chemical performance in sand consolidation are introduced in this paper.Furthermore,the results of field operations and in-jections of chemicals into the desired formation are also reported.These results show that the chemical sand consolidation is more effective in newly perforated wells which have no sand production experi-ence and have a production history of less than two years.Finally,it was concluded that the main challenges in applying this method are permeability and capillary force reduction around the wellbore and selective injection into the targeted formation layers.
基金provided by the independent research subject of State Key Laboratory of Coal Resources and Mine Safety of China University of Mining and Technology (No. SKLCRSM12X03)the Scientific Research and Innovation Project for College Graduates in Jiangsu (No. CXZZ13_0947)
文摘Aimed at determining the appropriate caving–mining ratio for fully mechanized mining of 20 m thick coal seam, this research investigated the effects of caving–mining ratio on the flow fields of coal and waste rocks, amount of cyclically caved coal and top coal loss by means of numerical modeling. The research was based on the geological conditions of panel 8102 in Tashan coal mine. The results indicated the loose coal and waste rocks formed an elliptical zone around the drawpoint. The ellipse enlarged with decreasing caving–mining ratio. And its long axis inclined to the gob gradually became vertical and facilitating the caving and recovery of top coal. The top coal loss showed a cyclical variation; and the loss cycle was shortened with the decreasing in caving–mining ratio. Moreover, the mean squared error(MSE) of the amount of cyclically caved coal went up with increasing caving–mining ratio, indicating a growing imbalance of amount of cyclically caved coal, which could impede the coordinated mining and caving operations. Finally it was found that a caving–mining ratio of 1:2.51 should be reasonable for the conditions.
基金The authors thank the National Natural Science Foundation of China，the Key Laboratory Project of Deep Rock Mechanics
文摘The deep, loose bottom aquifer of the eastern air shaft in the Xinglongzhuang Coal Mine was used to develop an experimental model of shaft grouting through Model deep soil. Lab experiments using chem- ical grouting were done to study the grout. The grouted soil shapes and osmotic pressure were measured during the experiments. The tested characteristics of the grouted soil show that the diffusion mode of grout in saturated sandy soil is a combination of split compaction and osmosis. More specifically, the shape of the grouted soil is determined by split compaction while the size of the grouted soil shape is determined by osmosis. Sensor test results indicate that the main reason for the non-uniform grout diffusion is the anisotropic osmotic pressure field surrounding the grouting holes.
文摘英语中一部分单词加上前缀in-或un-,可表示“不”、“无”、“非”等否定含义。它们与其同形的词根在意义上通常构成反义,如:correct/incorrect(正确的/不正确的);close/unclose(关、闭/打开)等。但是,有些由前缀in-或un-构成的派生词却并无否定意义。它们与原词根貌似反义,实则同义或近义,使用时切勿望文生义。如: 1.habit vt.居住在 inhabit vt.居住于 1)They had habited different parts of the globe. 他们曾在世界各地住过。
文摘This essay centralizes on the analysis of the writing skills,the theme and my personal insights of Sons and Lovers,as well as my interpretation of the mother-son relationship in terms of feminism.Overall,hope it will provide a specific perspective of this renowned novel and arouse the readers'attention to interpret the novel themselves.
文摘For accurate aeroelastic analysis,the unsteady rotor flowfield is solved by computational fluid dynamics(CFD)module based on RANS/Euler equations and moving-embedded grid system,while computational structural dynamics(CSD)module is introduced to handle blade flexibility.In CFD module,dual time-stepping algorithm is employed in temporal discretization,Jameson two-order central difference(JST)scheme is adopted in spatial discretization and B-L turbulent model is used to illustrate the viscous effect.The CSD module is developed based on Hamilton′s variational principles and moderate deflection beam theory.Grid deformation is implemented using algebraic method through coordinate transformations to achieve deflections with high quality and efficiency.A CFD/CSD loose coupling strategy is developed to transfer information between rotor flowfield and blade structure.The CFD and the CSD modules are verified seperately.Then the CFD/CSD loose coupling is adopted in airloads prediction of UH-60A rotor under high speed forward flight condition.The calculated results agree well with test data.Finally,effects of torsional stiffness properties on airloads of rotors with different tip swept angles(from 10° forward to 30° backward)are investigated.The results are evaluated through pressure distribution and airloads variation,and some meaningful conclusions are drawn the moderated shock wave strength and pressure gradient caused by varied tip swept angle and structural properties.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10376021 and 10676025, and the Scientific Research Fund of Sichuan Provincial Education Department （2006A131）.
文摘The potential energy function of nitrogen dioxide with the C2v symmetry in the ground state is represented using the simplified Sorbie-Murrell many-body expansion function in terms of the symmetry of NO2. Using the potential energy function, some potential energy surfaces of NO2（C2v, X^-^2A1）, such as the bond stretching contour plot for a fixed equilibrium geometry angle θ and contour for O moving around N-O （R1）, in which R1 is fixed at the equilibrium bond length, are depicted. The potential energy surfaces are analysed. Moreover, the equilibrium parameters for NO2 with the C2v, Cs and Dsn symmetries, such as equilibrium geometry structures and energies, are calculated by the ab initio （CBS-Q） method.
文摘除了动词 be 常作连系动词以外,还有一些行为动词可用作连系动词,其中come 和 go 所接作表语的形容词略有不同的特点,值得注意。一般说来,come 与 go 作系动词,都含“变为”之意,然而come后的形容词表语常指令说话人“感到满意或开心”的结果,go 后的形容词表语多表“令人不快或沮丧”的场合,请比较下面实例:
