Microstrip transmission lines connecting to the millimeter wave radar chip and antenna significantly affect the radiation efficiency and bandwidth of the antenna.Here,a wideband non-uniform wavy microstrip line for co...Microstrip transmission lines connecting to the millimeter wave radar chip and antenna significantly affect the radiation efficiency and bandwidth of the antenna.Here,a wideband non-uniform wavy microstrip line for complex impedance in automotive radar frequency range is proposed.Unlike the gradient transmission line,the wavy structure is composed of periodically semi-circular segments.By adjusting the radius of the semi-circular,the surface current is varied and concentrated on the semi-circular segments,allowing a wider tunability range of the resonant frequency.The results reveal that the bandwidth of the loaded wavy transmission line antenna improves to 9.37 GHz,which is 5.81 GHz wider than that of the loaded gradient line.The gain and the half power beam width of the loaded antenna are about 14.69 dB and 9.58°,respectively.The proposed non-uniform microstrip line scheme may open up a route for realizing wideband millimeter-wave automotive radar applications.展开更多
Microstrip traveling wave tubes(TWTs)have garnered significant attention due to their potential applications in communication,defense,and industrial systems.This paper presents a compact W-band dual-channel TWT,utiliz...Microstrip traveling wave tubes(TWTs)have garnered significant attention due to their potential applications in communication,defense,and industrial systems.This paper presents a compact W-band dual-channel TWT,utilizing a U-shaped microstrip meander-line slow-wave structure(SWS).High-frequency characteristics are analyzed through simulation and cold tests.The results demonstrate that adjusting structural parameters effectively optimizes the S-parameters.Particle-in-cell(PIC)simulations with an 18.8 kV,0.1 A electron beam predict an output power of 18 W with a gain of 14 dB.Experimental measurements of S-parameters are conducted using three substrate materials:Rogers 5880,quartz,and diamond.The quartz substrate exhibits the closest agreement with simulation results.The results advance the development of the microstrip-based TWTs for high-data-rate communication systems.展开更多
For every integer 4≤d≤11,an explicit construction of infinite families of 2d-regular unique-neighbor expanders is presented,which is a generalization of the 6-regular unique-neighbors initially developed by Alon and...For every integer 4≤d≤11,an explicit construction of infinite families of 2d-regular unique-neighbor expanders is presented,which is a generalization of the 6-regular unique-neighbors initially developed by Alon and Capalbo.Additionally,for values of d greater than 11,a sufficient condition is established for employing the same construction method.Our construction method involves the“line product”of large bipartite Ramanujan graphs and a sufficiently good unique-neighbor expander(a small gadget).展开更多
Prediction of water inflow into a tunnel is a crucial prerequisite for the waterproof and drainage design of mountain tunnels in water-rich areas.Based on the proposed Baiyun Mountain Tunnel project in Guangzhou,a num...Prediction of water inflow into a tunnel is a crucial prerequisite for the waterproof and drainage design of mountain tunnels in water-rich areas.Based on the proposed Baiyun Mountain Tunnel project in Guangzhou,a numerical percolation model of random fractured rock of a tunnel underpassing a water reservoir is established to study the seepage characteristics of surrounding rock,the law of water inflow,and the change of lining water pressure,considering the local artificial boundary conditions for seepage in large rock mass,.In addition,the influences of rock permeability,fracture aperture,grouting circle thickness,and penetration are analyzed.The results show that:(1)Only fractures with aperture wider than 0.1 mm can play a significant role in water conduction in rocks with the permeability lower than 10^(-11)m^(2);(2)The greater the permeability difference between the fractures and rocks,the more remarkable the effects of fractures on the surrounding rock seepage field and cavern water inflow;(3)The sensitivity of grouting waterproof function to grouting circle thickness,grouting ring penetration,and rock permeability is significantly higher than that of tunnel buried depth and fracture aperture;(4)The lining water head is much more sensitive to the grouting circle thickness and penetration than to the tunnel buried depth;(5)With the grouting range enlarging,the impact of grouting circle permeability on the precipitation pressure role of the grouting ring increases;(6)For the interesting tunnel designed to be built at the depth of 70 m,the grouting circle with the thickness of 0.5 m and permeability of 10-^(14)m^(2)is recommended.展开更多
Background Transgenic research in crops involves using genetic engineering techniques to introduce specific genes of interest from other organisms,or even entirely new genes into plant genomes to create crops with des...Background Transgenic research in crops involves using genetic engineering techniques to introduce specific genes of interest from other organisms,or even entirely new genes into plant genomes to create crops with desirable traits that wouldn’t be possible through conventional breeding methods.Transgenic crops have been developed for various traits globally.Whitefly,Bemisia tabaci(Gennadius)is one of the major sucking pests of cotton that cause significant damage to the cotton production.To combat whitefly infestations,researchers have developed four transgenic cotton lines expressing the fern protein.And those transgenic lines need to be evaluated for their performance against the target pest—whitefly.The evaluation was designed as controlled trials in polyhouse or muslin cloth cages under open-choice and no-choice conditions by comparing four transgenic cotton lines(A,B,C,and D)with three control groups,including untransformed cotton plants with a same genetic background of the transgenic line,conventionally bred whitefly-resistant cotton,and whitefly-susceptible cotton.In order to study the generational effect,the evaluation also involved studies on whitefly development in laboratory,muslin cloth cage,and polyhouse conditions.Results Both open-choice and no-choice experiments had shown that all the four transgenic cotton lines(A,B,C,and D)expressing the fern protein reduced adult whitefly numbers significantly compared with the control lines,except for the no-choice conditions in 2021,where the transgenic line C was non-significant different from the resistant control line.Notably,the nymphal population on the resistant control line was relatively low and nonsignificant different from the transgenic line C in 2021;and the transgenic lines A and C in 2022 under open-choice conditions.Under no-choice condition,the nymphal counts in the resistant control line was non-significant different from transgenic lines C and D in 2021;and transgenic line D in 2022.All transgenic lines showed significant decrease in egg hatching in 2021 and nymphal development in 2022,except for the transgenic line C which had no significant different in the nymphal development comparing with non-transgenic control lines in 2022.Adult emergence rates in both years of evaluation showed significant decrease in transgenic lines A and B comparing with the control lines.Additionally,the results showed a significant reduction in cotton leaf curl disease and sooty mold development in all the four transgenic lines compared with susceptible control under open-choice conditions,indicating potential benefits of transgenic lines beyond direct effect on whitefly control.Furthermore,the research explored the generational effects of the fern protein on whitefly which revealed the lowest fecundity in the transgenic line C across F0,F1 and F3 generations,lower egg hatching in F1 and F2 generations in transgenic lines A and B,shorter nymphal duration in F1 and F2 generations in transgenic line B,and the least total adult emergence in the transgenic line C in F0 and F3 generations.Conclusions These findings suggest that the transgenic cotton lines expressing fern protein disrupts whitefly populations and the life cycle to a certain extent.However,results are not consistent over generations and years of study,indicating these transgenic lines were not superior over control lines and need to be improved in future breeding.展开更多
The worm wheel whose undercutting characteristic is researched is a member of offsetting normal arc-toothed cylindrical worm drive.The tooth profile of the worm in its offsetting normal section is a circular arc.The n...The worm wheel whose undercutting characteristic is researched is a member of offsetting normal arc-toothed cylindrical worm drive.The tooth profile of the worm in its offsetting normal section is a circular arc.The normal vector used to calculate the first-type limit function is determined in the natural frame without the aid of the curvature parameter of worm helicoid.The first-type limit line is ascertained via solving the nonlinear equations iteratively.It is discovered that one first-type limit line exists on the tooth surface of worm wheel by numerical simulation,and such a line is normally located out of the meshing zone.Only one intersection point exists between the first and second-types of limit lines,and this point is a lubrication weak point.The undercutting mechanism is essentially that a part of the meshing zone near the conjugated line of worm tooth crest will come into the undercutting area and will be cut off during machining the worm wheel.The machining simulation verifies the correctness of undercutting mechanism.Moreover,a convenient and practical characteristic quantity is proposed to judge whether the undercutting exists in the whole meshing zone via computing the first-type limit function values on the worm tooth crest.展开更多
The study aims to investigate the carbonated water erosion mechanism of lining concrete in tunnels traversing karst environment and enhance its resistance.In this study,dynamic carbonated water erosion was simulated t...The study aims to investigate the carbonated water erosion mechanism of lining concrete in tunnels traversing karst environment and enhance its resistance.In this study,dynamic carbonated water erosion was simulated to assess erosion depth,microstructure,phase migrations,and pore structure in various tunnel lining cement-based materials.Additionally,Ca^(2+)leaching was analyzed,and impact of Ca/Si molar ratio in hydration products on erosion resistance was discussed by thermodynamic calculations.The results indicate that carbonated water erosion caused rough and porous surface on specimens,with reduced portlandite and CaCO_(3) content,increased porosity,and an enlargement of pore size.The thermodynamic calculations indicate that the erosion is spontaneous,driven by physical dissolution and chemical reactions dominated by Gibbs free energy.And the erosion reactions proceed more spontaneously and extensively when Ca/Si molar ratio in hydration products was higher.Therefore,cement-based materials with higher portlandite content exhibit weaker erosion resistance.Model-building concrete,with C-S-H gel and portlandite as primary hydration products,has greater erosion susceptibility than shotcrete with ettringite as main hydration product.Moreover,adding silicon-rich mineral admixtures can enhance the erosion resistance.This research offers theory and tech insights to boost cement-based material resistance against carbonated water erosion in karst tunnel engineering.展开更多
基金Supported by the National Natural Science Foundation of China( 61974104)。
文摘Microstrip transmission lines connecting to the millimeter wave radar chip and antenna significantly affect the radiation efficiency and bandwidth of the antenna.Here,a wideband non-uniform wavy microstrip line for complex impedance in automotive radar frequency range is proposed.Unlike the gradient transmission line,the wavy structure is composed of periodically semi-circular segments.By adjusting the radius of the semi-circular,the surface current is varied and concentrated on the semi-circular segments,allowing a wider tunability range of the resonant frequency.The results reveal that the bandwidth of the loaded wavy transmission line antenna improves to 9.37 GHz,which is 5.81 GHz wider than that of the loaded gradient line.The gain and the half power beam width of the loaded antenna are about 14.69 dB and 9.58°,respectively.The proposed non-uniform microstrip line scheme may open up a route for realizing wideband millimeter-wave automotive radar applications.
基金National Natural Science Foundation of China(62471097,62471115,62471101)Natural Science Foundation of Sichuan Province(2025ZNSFSC0537)Stable Support Porject of 12th Research Institute of China Electronics Technology Group Corporation。
文摘Microstrip traveling wave tubes(TWTs)have garnered significant attention due to their potential applications in communication,defense,and industrial systems.This paper presents a compact W-band dual-channel TWT,utilizing a U-shaped microstrip meander-line slow-wave structure(SWS).High-frequency characteristics are analyzed through simulation and cold tests.The results demonstrate that adjusting structural parameters effectively optimizes the S-parameters.Particle-in-cell(PIC)simulations with an 18.8 kV,0.1 A electron beam predict an output power of 18 W with a gain of 14 dB.Experimental measurements of S-parameters are conducted using three substrate materials:Rogers 5880,quartz,and diamond.The quartz substrate exhibits the closest agreement with simulation results.The results advance the development of the microstrip-based TWTs for high-data-rate communication systems.
文摘For every integer 4≤d≤11,an explicit construction of infinite families of 2d-regular unique-neighbor expanders is presented,which is a generalization of the 6-regular unique-neighbors initially developed by Alon and Capalbo.Additionally,for values of d greater than 11,a sufficient condition is established for employing the same construction method.Our construction method involves the“line product”of large bipartite Ramanujan graphs and a sufficiently good unique-neighbor expander(a small gadget).
文摘Prediction of water inflow into a tunnel is a crucial prerequisite for the waterproof and drainage design of mountain tunnels in water-rich areas.Based on the proposed Baiyun Mountain Tunnel project in Guangzhou,a numerical percolation model of random fractured rock of a tunnel underpassing a water reservoir is established to study the seepage characteristics of surrounding rock,the law of water inflow,and the change of lining water pressure,considering the local artificial boundary conditions for seepage in large rock mass,.In addition,the influences of rock permeability,fracture aperture,grouting circle thickness,and penetration are analyzed.The results show that:(1)Only fractures with aperture wider than 0.1 mm can play a significant role in water conduction in rocks with the permeability lower than 10^(-11)m^(2);(2)The greater the permeability difference between the fractures and rocks,the more remarkable the effects of fractures on the surrounding rock seepage field and cavern water inflow;(3)The sensitivity of grouting waterproof function to grouting circle thickness,grouting ring penetration,and rock permeability is significantly higher than that of tunnel buried depth and fracture aperture;(4)The lining water head is much more sensitive to the grouting circle thickness and penetration than to the tunnel buried depth;(5)With the grouting range enlarging,the impact of grouting circle permeability on the precipitation pressure role of the grouting ring increases;(6)For the interesting tunnel designed to be built at the depth of 70 m,the grouting circle with the thickness of 0.5 m and permeability of 10-^(14)m^(2)is recommended.
文摘Background Transgenic research in crops involves using genetic engineering techniques to introduce specific genes of interest from other organisms,or even entirely new genes into plant genomes to create crops with desirable traits that wouldn’t be possible through conventional breeding methods.Transgenic crops have been developed for various traits globally.Whitefly,Bemisia tabaci(Gennadius)is one of the major sucking pests of cotton that cause significant damage to the cotton production.To combat whitefly infestations,researchers have developed four transgenic cotton lines expressing the fern protein.And those transgenic lines need to be evaluated for their performance against the target pest—whitefly.The evaluation was designed as controlled trials in polyhouse or muslin cloth cages under open-choice and no-choice conditions by comparing four transgenic cotton lines(A,B,C,and D)with three control groups,including untransformed cotton plants with a same genetic background of the transgenic line,conventionally bred whitefly-resistant cotton,and whitefly-susceptible cotton.In order to study the generational effect,the evaluation also involved studies on whitefly development in laboratory,muslin cloth cage,and polyhouse conditions.Results Both open-choice and no-choice experiments had shown that all the four transgenic cotton lines(A,B,C,and D)expressing the fern protein reduced adult whitefly numbers significantly compared with the control lines,except for the no-choice conditions in 2021,where the transgenic line C was non-significant different from the resistant control line.Notably,the nymphal population on the resistant control line was relatively low and nonsignificant different from the transgenic line C in 2021;and the transgenic lines A and C in 2022 under open-choice conditions.Under no-choice condition,the nymphal counts in the resistant control line was non-significant different from transgenic lines C and D in 2021;and transgenic line D in 2022.All transgenic lines showed significant decrease in egg hatching in 2021 and nymphal development in 2022,except for the transgenic line C which had no significant different in the nymphal development comparing with non-transgenic control lines in 2022.Adult emergence rates in both years of evaluation showed significant decrease in transgenic lines A and B comparing with the control lines.Additionally,the results showed a significant reduction in cotton leaf curl disease and sooty mold development in all the four transgenic lines compared with susceptible control under open-choice conditions,indicating potential benefits of transgenic lines beyond direct effect on whitefly control.Furthermore,the research explored the generational effects of the fern protein on whitefly which revealed the lowest fecundity in the transgenic line C across F0,F1 and F3 generations,lower egg hatching in F1 and F2 generations in transgenic lines A and B,shorter nymphal duration in F1 and F2 generations in transgenic line B,and the least total adult emergence in the transgenic line C in F0 and F3 generations.Conclusions These findings suggest that the transgenic cotton lines expressing fern protein disrupts whitefly populations and the life cycle to a certain extent.However,results are not consistent over generations and years of study,indicating these transgenic lines were not superior over control lines and need to be improved in future breeding.
基金Projects(52205069,52075083,52304049)supported by the National Natural Science Foundation of ChinaProject(2021-BS-164)supported by the Liaoning Province Doctoral Research Startup Fund,China+2 种基金Project(LJKZ0264)supported by the Science and Technology Research Projects of Education Department of Liaoning Province,ChinaProject(G2022003010L)supported by the High-end Foreign Experts Recruitment Plan of ChinaProject(E2021203095)supported by the Natural Science Foundation for Young Scholars of Hebei Province,China。
文摘The worm wheel whose undercutting characteristic is researched is a member of offsetting normal arc-toothed cylindrical worm drive.The tooth profile of the worm in its offsetting normal section is a circular arc.The normal vector used to calculate the first-type limit function is determined in the natural frame without the aid of the curvature parameter of worm helicoid.The first-type limit line is ascertained via solving the nonlinear equations iteratively.It is discovered that one first-type limit line exists on the tooth surface of worm wheel by numerical simulation,and such a line is normally located out of the meshing zone.Only one intersection point exists between the first and second-types of limit lines,and this point is a lubrication weak point.The undercutting mechanism is essentially that a part of the meshing zone near the conjugated line of worm tooth crest will come into the undercutting area and will be cut off during machining the worm wheel.The machining simulation verifies the correctness of undercutting mechanism.Moreover,a convenient and practical characteristic quantity is proposed to judge whether the undercutting exists in the whole meshing zone via computing the first-type limit function values on the worm tooth crest.
基金Project(2021YJ059)supported by the Research Project of China Academy of Railway Sciences。
文摘The study aims to investigate the carbonated water erosion mechanism of lining concrete in tunnels traversing karst environment and enhance its resistance.In this study,dynamic carbonated water erosion was simulated to assess erosion depth,microstructure,phase migrations,and pore structure in various tunnel lining cement-based materials.Additionally,Ca^(2+)leaching was analyzed,and impact of Ca/Si molar ratio in hydration products on erosion resistance was discussed by thermodynamic calculations.The results indicate that carbonated water erosion caused rough and porous surface on specimens,with reduced portlandite and CaCO_(3) content,increased porosity,and an enlargement of pore size.The thermodynamic calculations indicate that the erosion is spontaneous,driven by physical dissolution and chemical reactions dominated by Gibbs free energy.And the erosion reactions proceed more spontaneously and extensively when Ca/Si molar ratio in hydration products was higher.Therefore,cement-based materials with higher portlandite content exhibit weaker erosion resistance.Model-building concrete,with C-S-H gel and portlandite as primary hydration products,has greater erosion susceptibility than shotcrete with ettringite as main hydration product.Moreover,adding silicon-rich mineral admixtures can enhance the erosion resistance.This research offers theory and tech insights to boost cement-based material resistance against carbonated water erosion in karst tunnel engineering.
文摘基于机器人队形控制中的领航者-跟随者方法(Leader-Follower Method)和基于行为方法(Behavior-based Method),提出了一种用于多自治水下机器人(AUV)队形控制的新方法。该方法以领航者来确定整个AUV编队的前进状态,跟随者时刻跟随领航者以保持一定的队形形状。同时,领航者和跟随者都被赋予一定的行为特性以实现奔向目标、队形维持、队形转换及障碍避碰等功能。考虑到领航者在行进过程中有可能会发生意外而导致任务失败,本方法设定一特殊的跟随者令其作为候选领航者时刻跟随领航者以防万一。分别采用模糊规划器和Line of Sight(LOS)技术来实现AUV编队的障碍避碰和导航。
