The tension and compression of face-centered-cubic high-entropy alloy(HEA) nanowires are significantly asymmetric, but the tension–compression asymmetry in nanoscale body-centered-cubic(BCC) HEAs is still unclear. In...The tension and compression of face-centered-cubic high-entropy alloy(HEA) nanowires are significantly asymmetric, but the tension–compression asymmetry in nanoscale body-centered-cubic(BCC) HEAs is still unclear. In this study,the tension–compression asymmetry of the BCC Al Cr Fe Co Ni HEA nanowire is investigated using molecular dynamics simulations. The results show a significant asymmetry in both the yield and flow stresses, with BCC HEA nanowire stronger under compression than under tension. The strength asymmetry originates from the completely different deformation mechanisms in tension and compression. In compression, atomic amorphization dominates plastic deformation and contributes to the strengthening, while in tension, deformation twinning prevails and weakens the HEA nanowire.The tension–compression asymmetry exhibits a clear trend of increasing with the increasing nanowire cross-sectional edge length and decreasing temperature. In particular, the compressive strengths along the [001] and [111] crystallographic orientations are stronger than the tensile counterparts, while the [110] crystallographic orientation shows the exactly opposite trend. The dependences of tension–compression asymmetry on the cross-sectional edge length, crystallographic orientation,and temperature are explained in terms of the deformation behavior of HEA nanowire as well as its variations caused by the change in these influential factors. These findings may deepen our understanding of the tension–compression asymmetry of the BCC HEA nanowires.展开更多
Quasi-bound state in the continuum(QBIC)resonance is gradually attracting attention and being applied in Goos-Hänchen(GH)shift enhancement due to its high quality(Q)factor and superior optical confinement.Current...Quasi-bound state in the continuum(QBIC)resonance is gradually attracting attention and being applied in Goos-Hänchen(GH)shift enhancement due to its high quality(Q)factor and superior optical confinement.Currently,symmetry-protected QBIC resonance is often achieved by breaking the geometric symmetry,but few cases are achieved by breaking the material symmetry.This paper proposes a dielectric compound grating to achieve a high Q factor and high-reflection symmetry-protectede QBIC resonance based on material asymmetry.Theoretical calculations show that the symmetry-protected QBIC resonance achieved by material asymmetry can significantly increase the GH shift up to-980 times the resonance wavelength,and the maximum GH shift is located at the reflection peak with unity reflectance.This paper provides a theoretical basis for designing and fabricating high-performance GH shift tunable metasurfaces/dielectric gratings in the future.展开更多
The reason for the asymmetry phenomenon of shock/boundary layer interactions(SBLI)in a completely symmetric nozzle with symmetric flow conditions is still an open question.A model for the asymmetry of nozzle flows was...The reason for the asymmetry phenomenon of shock/boundary layer interactions(SBLI)in a completely symmetric nozzle with symmetric flow conditions is still an open question.A model for the asymmetry of nozzle flows was proposed based on the properties of fluid entrainment in the mixing layer and momentum conservation.The asymmetry model is deduced based on the nozzle flow with restricted shock separation,and is still applicable for free shock separation.Flow deflection angle at nozzle exit is deduced from this model.Steady numerical simulations are conducted to model the asymmetry of the SBLIs in a planar convergent-divergent nozzle tested by previous researchers.The obtained values of deflection angle based on the numerical results of forced symmetric nozzle flows can judge the asymmetry of flows in a nozzle at some operations.It shows that the entrainment of shear layer on the separation induced by SBLTs is one of the reasons for the asymmetry in the confined SBLIs.展开更多
After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively sho...After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively short term.This paper reviewed the asymmetric regulation policies and practices carried out in foreign telecom market,and then according to the specific situations of Chinese telecom market,proposed the principles and corresponding policies for establishing an asymmetric regulation system fit for Chinese telecom market.展开更多
Delta asymmetry forms in wave-influenced settings where there is strong net longshore drift. Asymmetric deltas typically have two sediment sources and are characterized by morphology and facies asymmetry between the d...Delta asymmetry forms in wave-influenced settings where there is strong net longshore drift. Asymmetric deltas typically have two sediment sources and are characterized by morphology and facies asymmetry between the downdrift and the updrift sides. The downdrift, sourced primarily by the feeding river, are commonly influenced by mixed river and wave processes. Deposits on this side are muddy and consist of barrier, bar, lagoon, bay-fill, and bayhead delta facies with variable bioturbation intensity. At or near the river mouth, heterolithic river-dominated successions are more typical. Deposits are overall unburrowed （BI 0-2）, but with high burrowing spikes. Ichnogenera are characterized by horizontal, morphologically simple, and facies-crossing structures. The updrift, in contrast, is sourced by a second sediment source and typically consists of laterally continuous sandy beach and shoreface facies. Bioturbation is overall high （BI 3-6） and ichnogenera are healthy and robust, attributable to the Cruziana and Skolithos lchnofacies. Depending on shoreline trajectory and depositional history, facies characteristics of asymmetric deltas preserved in the ancient record, however, can be different from those predicted by the models. Degree of asymmetry is indicated by the asymmetry index （A）, defined as the ratio between the rate of longshore transport at the river mouth and river water discharge. The indexes in symmetric waveinfluenced deltas is less than 200, whereas those in asymmetric and deflected deltas are larger than 200. Overall the larger the index, the higher the degree of asymmetry. Delta asymmetry concepts and models challenge the traditional definition of deltas and the delta classification scheme, in a hydrocarbon exploration perspective, asymmetric deltas bear very different types of sands and, thus, reservoirs between the updrift and the downdrift. The updrift consists of wellsorted, mature, and laterally continuous homogeneous beach-shoreface reservoirs. The downdrift, in contrast, is muddier and consists of less continuous, less mature, heterolithic reservoirs.展开更多
This paper investigates the relationship between the speed of a quantum not gate and the asymmetry of the potential in an interactive system formed by a two-level RF-SQUID qubit and a classical microwave pulse. The RF...This paper investigates the relationship between the speed of a quantum not gate and the asymmetry of the potential in an interactive system formed by a two-level RF-SQUID qubit and a classical microwave pulse. The RFSQUID is characterized by an asymmetric double well potential which gives rise to diagonal matrix elements that describe the interaction of the SQUID with the microwave pulse. And the diagonal matrix elements account for the interaction of the microwave pulse with the SQUID. The results indicate that, when the angular frequency of the microwave field is chosen as near resonate with the transition （0） ←→ （1）, i.e. ω1 -ω0 ≈ ωm, （1） the gate speed is decided by three factors, the Rabi frequency, the difference of the diagonal matrix elements between the two levels, and the angular frequency of the applied microwave pulse ωm; （2） the gate speed descends when the asymmetry of the potential is considered.展开更多
This paper investigates the stochastic resonance （SR） phenomenon in an asymmetric system with coupling between multiplicative and additive noise when the coupling between two noise terms is coloured. The approximate...This paper investigates the stochastic resonance （SR） phenomenon in an asymmetric system with coupling between multiplicative and additive noise when the coupling between two noise terms is coloured. The approximate expression of signal-to-noise ratio has been obtained by applying the two-state theory and SR exhibits in the bistable system. Moreover, the potential asymmetry r and cross-correlation strength λ can weaken the SR phenomenon, while the cross-correlation time r can strengthen the SR phenomenon.展开更多
Some precision electronics such as signal transmitters need to not only emit effective signal but also be protected from the external electromagnetic(EM)waves.Thus,directional electromagnetic interference(EMI)shieldin...Some precision electronics such as signal transmitters need to not only emit effective signal but also be protected from the external electromagnetic(EM)waves.Thus,directional electromagnetic interference(EMI)shielding materials(i.e.,when the EM wave is incident from different sides of the sample,the EMI shielding effectiveness(SE)is rather different)are strongly required;unfortunately,no comprehensive literature report is available on this research field.Herein,Nicoated melamine foams(Ni@MF)were obtained by a facile electroless plating process,and multiwalled carbon nanotube(CNT)papers were prepared via a simple vacuum-assisted self-assembly approach.Then,step-wise asymmetric poly(butylene adipate-co-terephthalate)(PBAT)composites consisting of loose Ni@MF layer and compact CNT layer were successfully fabricated via a facile solution encapsulation approach.The step-wise asymmetric structures and electrical conductivity endow the Ni@MF/CNT/PBAT composites with unprecedented directional EMI shielding performances.When the EM wave is incident from Ni@MF layer or CNT layer,Ni@MF-5/CNT-75/PBAT exhibits the total EMI SE(SET)of 38.3 and 29.5 dB,respectively,which illustrates theΔSET of 8.8 dB.This work opens a new research window for directional EMI shielding composites with step-wise asymmetric structures,which has promising applications in portable electronics and next-generation communication technologies.展开更多
Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse directi...Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse direction(TD)and normal direction(ND))were carried out at strain rates of 1000,2000 and 4000 s-1,respectively.From the microscopic point of view,the effect of strain rate and anisotropy on tension compression asymmetry of aviation aluminum alloy 7050 was studied by scanning electron microscope(SEM),metallographic microscope and electron backscatter diffraction(EBSD).The results showed that there was obvious asymmetry between tension and compression,especially that the yield strength of the material in tension was higher than that in compression.The asymmetry in the elastic stage of tension-compression was weaker and the asymmetry in the strengthening stage was stronger with the increase of strain rate.At the same strain rate,the changing trend of the flow stress was distinct under different orientations of tension and compression,which was related to the stress direction of the grains.According to EBSD grain orientation analysis and raw material texture pole figure analysis,it was found that the larger the difference in the degree of grain refinement during tension and compression,the larger the macro-flow stress difference.展开更多
In an arcjet thruster,the cathode and constrictor degrade with time,and the electrical arc discharge may become unsymmetrical.In this work,a three-dimensional numerical model of a hydrogen plasma arcjet is developed a...In an arcjet thruster,the cathode and constrictor degrade with time,and the electrical arc discharge may become unsymmetrical.In this work,a three-dimensional numerical model of a hydrogen plasma arcjet is developed and validated to study the effect of unsymmetrical electric arc discharge on thruster performance.The unsymmetrical arc discharge is realized by introducing a radial shift of the cathode so that the cathode tip offset is 80μm(25%of the constrictor radius).Simulations are conducted for both axially centered cathode(coaxial)and off-centered cathode(non-coaxial)configurations with identical propellant flow rates and input current.Simulations show asymmetrical arc discharge in the non-coaxial cathode configuration,resulting in azimuthally asymmetric Joule heating,species concentrations,and velocity field.This asymmetry continues as the plasma expands in the divergent section of the nozzle.Temperature,species concentrations,and axial velocity exhibit asymmetric radial distribution at the nozzle exit.The computed Joule heating was found to reduce with cathode shift,and consequently,the thrust and specific impulse of the thruster was decreased by about 6.6%.In the case of the non-coaxial cathode,geometric asymmetry also induces a small side thrust.展开更多
Implosion asymmetry is a crucial problem quenching ignition in the field of inertial confinement fusion.A forward-calculation method based on 1D and 2D hydrodynamic simulations has been developed to generate and study...Implosion asymmetry is a crucial problem quenching ignition in the field of inertial confinement fusion.A forward-calculation method based on 1D and 2D hydrodynamic simulations has been developed to generate and study the x-ray images of hot-spot self-emission,indicating asymmetry integrated over the entire drive pulse.It is shown that the x-ray imaging photon energy should be higher to avoid the influence of the remaining shell.The contour level(percentage of the maximum emission intensity)and spatial resolution should be as low as possible,optimally less than 20%and 3μm,for characterization of higher-mode signatures such as Ps-P12 by x-ray self-emission images.On the contrary,signatures of lower-mode such as P2 remain clear at all contour levels and spatial resolutions.These key results can help determine the optimal diagnostics,laser,and target parameters for implosion experiments.Recent typical hot-spot asymmetry measurements and applications on the Shenguang 100 kJ class laser facility are also reported.展开更多
Levitation chassis, as an extremely important component of maglev vehicles, provides functions of transmitting levitation force and steering force, and directly affects the safety performance of the vehicle. Based on ...Levitation chassis, as an extremely important component of maglev vehicles, provides functions of transmitting levitation force and steering force, and directly affects the safety performance of the vehicle. Based on the vertical dynamics model of the levitation chassis, kinetic equations of the model are established, and a simulation program is designed to analyze the structural decoupling function of the chassis, especially under the influence of elastic constraints between the left and right modules, which are exclusively owned by maglev vehicles. A finite element model of the levitation chassis based on left-right decoupling is constructed. Analysis results of the model show that the mechanical properties of the chassis tailored for the vehicle meet the design requirements, and the stiffness and strength is adequate to bear the weight of the whole vehicle.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No.12272118)the National Key Research and Development Program of China (Grant No.2022YFE03030003)。
文摘The tension and compression of face-centered-cubic high-entropy alloy(HEA) nanowires are significantly asymmetric, but the tension–compression asymmetry in nanoscale body-centered-cubic(BCC) HEAs is still unclear. In this study,the tension–compression asymmetry of the BCC Al Cr Fe Co Ni HEA nanowire is investigated using molecular dynamics simulations. The results show a significant asymmetry in both the yield and flow stresses, with BCC HEA nanowire stronger under compression than under tension. The strength asymmetry originates from the completely different deformation mechanisms in tension and compression. In compression, atomic amorphization dominates plastic deformation and contributes to the strengthening, while in tension, deformation twinning prevails and weakens the HEA nanowire.The tension–compression asymmetry exhibits a clear trend of increasing with the increasing nanowire cross-sectional edge length and decreasing temperature. In particular, the compressive strengths along the [001] and [111] crystallographic orientations are stronger than the tensile counterparts, while the [110] crystallographic orientation shows the exactly opposite trend. The dependences of tension–compression asymmetry on the cross-sectional edge length, crystallographic orientation,and temperature are explained in terms of the deformation behavior of HEA nanowire as well as its variations caused by the change in these influential factors. These findings may deepen our understanding of the tension–compression asymmetry of the BCC HEA nanowires.
基金Project supported by the Zhejiang Provincial Natural Science Foundation of China(Grant No.LQ23F040001)the National Natural Science Foundation of China(Grant No.12204446)+1 种基金the Public Welfare Technology Research Project of Zhejiang Province(Grant No.LGC22E050006)the Quzhou Science and Technology Project of China(Grant No.2022K104).
文摘Quasi-bound state in the continuum(QBIC)resonance is gradually attracting attention and being applied in Goos-Hänchen(GH)shift enhancement due to its high quality(Q)factor and superior optical confinement.Currently,symmetry-protected QBIC resonance is often achieved by breaking the geometric symmetry,but few cases are achieved by breaking the material symmetry.This paper proposes a dielectric compound grating to achieve a high Q factor and high-reflection symmetry-protectede QBIC resonance based on material asymmetry.Theoretical calculations show that the symmetry-protected QBIC resonance achieved by material asymmetry can significantly increase the GH shift up to-980 times the resonance wavelength,and the maximum GH shift is located at the reflection peak with unity reflectance.This paper provides a theoretical basis for designing and fabricating high-performance GH shift tunable metasurfaces/dielectric gratings in the future.
基金supported by the National Natural Science Foundations of China(Nos.51476076,51776096)
文摘The reason for the asymmetry phenomenon of shock/boundary layer interactions(SBLI)in a completely symmetric nozzle with symmetric flow conditions is still an open question.A model for the asymmetry of nozzle flows was proposed based on the properties of fluid entrainment in the mixing layer and momentum conservation.The asymmetry model is deduced based on the nozzle flow with restricted shock separation,and is still applicable for free shock separation.Flow deflection angle at nozzle exit is deduced from this model.Steady numerical simulations are conducted to model the asymmetry of the SBLIs in a planar convergent-divergent nozzle tested by previous researchers.The obtained values of deflection angle based on the numerical results of forced symmetric nozzle flows can judge the asymmetry of flows in a nozzle at some operations.It shows that the entrainment of shear layer on the separation induced by SBLTs is one of the reasons for the asymmetry in the confined SBLIs.
文摘After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively short term.This paper reviewed the asymmetric regulation policies and practices carried out in foreign telecom market,and then according to the specific situations of Chinese telecom market,proposed the principles and corresponding policies for establishing an asymmetric regulation system fit for Chinese telecom market.
基金supported by the National Basic Research Program of China(No.2009CB219407)the National Natural Science Foundation of China(No.40972077)
文摘Delta asymmetry forms in wave-influenced settings where there is strong net longshore drift. Asymmetric deltas typically have two sediment sources and are characterized by morphology and facies asymmetry between the downdrift and the updrift sides. The downdrift, sourced primarily by the feeding river, are commonly influenced by mixed river and wave processes. Deposits on this side are muddy and consist of barrier, bar, lagoon, bay-fill, and bayhead delta facies with variable bioturbation intensity. At or near the river mouth, heterolithic river-dominated successions are more typical. Deposits are overall unburrowed （BI 0-2）, but with high burrowing spikes. Ichnogenera are characterized by horizontal, morphologically simple, and facies-crossing structures. The updrift, in contrast, is sourced by a second sediment source and typically consists of laterally continuous sandy beach and shoreface facies. Bioturbation is overall high （BI 3-6） and ichnogenera are healthy and robust, attributable to the Cruziana and Skolithos lchnofacies. Depending on shoreline trajectory and depositional history, facies characteristics of asymmetric deltas preserved in the ancient record, however, can be different from those predicted by the models. Degree of asymmetry is indicated by the asymmetry index （A）, defined as the ratio between the rate of longshore transport at the river mouth and river water discharge. The indexes in symmetric waveinfluenced deltas is less than 200, whereas those in asymmetric and deflected deltas are larger than 200. Overall the larger the index, the higher the degree of asymmetry. Delta asymmetry concepts and models challenge the traditional definition of deltas and the delta classification scheme, in a hydrocarbon exploration perspective, asymmetric deltas bear very different types of sands and, thus, reservoirs between the updrift and the downdrift. The updrift consists of wellsorted, mature, and laterally continuous homogeneous beach-shoreface reservoirs. The downdrift, in contrast, is muddier and consists of less continuous, less mature, heterolithic reservoirs.
基金Project supported by the Science and Technology Research Foundation of the Education Department of Jiangxi Province,China(Grant No 200592)
文摘This paper investigates the relationship between the speed of a quantum not gate and the asymmetry of the potential in an interactive system formed by a two-level RF-SQUID qubit and a classical microwave pulse. The RFSQUID is characterized by an asymmetric double well potential which gives rise to diagonal matrix elements that describe the interaction of the SQUID with the microwave pulse. And the diagonal matrix elements account for the interaction of the microwave pulse with the SQUID. The results indicate that, when the angular frequency of the microwave field is chosen as near resonate with the transition （0） ←→ （1）, i.e. ω1 -ω0 ≈ ωm, （1） the gate speed is decided by three factors, the Rabi frequency, the difference of the diagonal matrix elements between the two levels, and the angular frequency of the applied microwave pulse ωm; （2） the gate speed descends when the asymmetry of the potential is considered.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 10472091 and 10332030)the Natural Science Foundation of Shaanxi Province (Grant No 2003A03)
文摘This paper investigates the stochastic resonance （SR） phenomenon in an asymmetric system with coupling between multiplicative and additive noise when the coupling between two noise terms is coloured. The approximate expression of signal-to-noise ratio has been obtained by applying the two-state theory and SR exhibits in the bistable system. Moreover, the potential asymmetry r and cross-correlation strength λ can weaken the SR phenomenon, while the cross-correlation time r can strengthen the SR phenomenon.
基金Science and Technology Plan Project of Guizhou Province(No.[2019]1084 and[2018]5781)National Natural Science Foundation of China(No.51963003)+3 种基金The Youth Science and Technology Talent Growth Project of Guizhou Province Education Department(No.[2018]106)Outstanding Youth Program of Guizhou Province(No.20170439178)The Key project of Fundamental research in Guizhou province[2020]1Z044Scientific Research Project of Introduced Talents of Guizhou University(No.(2017)07)are acknowledged for the financial support.
文摘Some precision electronics such as signal transmitters need to not only emit effective signal but also be protected from the external electromagnetic(EM)waves.Thus,directional electromagnetic interference(EMI)shielding materials(i.e.,when the EM wave is incident from different sides of the sample,the EMI shielding effectiveness(SE)is rather different)are strongly required;unfortunately,no comprehensive literature report is available on this research field.Herein,Nicoated melamine foams(Ni@MF)were obtained by a facile electroless plating process,and multiwalled carbon nanotube(CNT)papers were prepared via a simple vacuum-assisted self-assembly approach.Then,step-wise asymmetric poly(butylene adipate-co-terephthalate)(PBAT)composites consisting of loose Ni@MF layer and compact CNT layer were successfully fabricated via a facile solution encapsulation approach.The step-wise asymmetric structures and electrical conductivity endow the Ni@MF/CNT/PBAT composites with unprecedented directional EMI shielding performances.When the EM wave is incident from Ni@MF layer or CNT layer,Ni@MF-5/CNT-75/PBAT exhibits the total EMI SE(SET)of 38.3 and 29.5 dB,respectively,which illustrates theΔSET of 8.8 dB.This work opens a new research window for directional EMI shielding composites with step-wise asymmetric structures,which has promising applications in portable electronics and next-generation communication technologies.
基金supported by the Natural Science Foundation of China(No.51675230)the Major Innovation Projects in Shandong Province (No. 2019JZZY010451)。
文摘Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse direction(TD)and normal direction(ND))were carried out at strain rates of 1000,2000 and 4000 s-1,respectively.From the microscopic point of view,the effect of strain rate and anisotropy on tension compression asymmetry of aviation aluminum alloy 7050 was studied by scanning electron microscope(SEM),metallographic microscope and electron backscatter diffraction(EBSD).The results showed that there was obvious asymmetry between tension and compression,especially that the yield strength of the material in tension was higher than that in compression.The asymmetry in the elastic stage of tension-compression was weaker and the asymmetry in the strengthening stage was stronger with the increase of strain rate.At the same strain rate,the changing trend of the flow stress was distinct under different orientations of tension and compression,which was related to the stress direction of the grains.According to EBSD grain orientation analysis and raw material texture pole figure analysis,it was found that the larger the difference in the degree of grain refinement during tension and compression,the larger the macro-flow stress difference.
基金the Indian Space Research Organization(VSSC-ISRO)for funding this research through ISRO-IITM Cell。
文摘In an arcjet thruster,the cathode and constrictor degrade with time,and the electrical arc discharge may become unsymmetrical.In this work,a three-dimensional numerical model of a hydrogen plasma arcjet is developed and validated to study the effect of unsymmetrical electric arc discharge on thruster performance.The unsymmetrical arc discharge is realized by introducing a radial shift of the cathode so that the cathode tip offset is 80μm(25%of the constrictor radius).Simulations are conducted for both axially centered cathode(coaxial)and off-centered cathode(non-coaxial)configurations with identical propellant flow rates and input current.Simulations show asymmetrical arc discharge in the non-coaxial cathode configuration,resulting in azimuthally asymmetric Joule heating,species concentrations,and velocity field.This asymmetry continues as the plasma expands in the divergent section of the nozzle.Temperature,species concentrations,and axial velocity exhibit asymmetric radial distribution at the nozzle exit.The computed Joule heating was found to reduce with cathode shift,and consequently,the thrust and specific impulse of the thruster was decreased by about 6.6%.In the case of the non-coaxial cathode,geometric asymmetry also induces a small side thrust.
基金National Key R&D Program(No.2017YFA0403204)Laser Fusion Research Funds for Young Talents(No.RCFPD1-2017-1)。
文摘Implosion asymmetry is a crucial problem quenching ignition in the field of inertial confinement fusion.A forward-calculation method based on 1D and 2D hydrodynamic simulations has been developed to generate and study the x-ray images of hot-spot self-emission,indicating asymmetry integrated over the entire drive pulse.It is shown that the x-ray imaging photon energy should be higher to avoid the influence of the remaining shell.The contour level(percentage of the maximum emission intensity)and spatial resolution should be as low as possible,optimally less than 20%and 3μm,for characterization of higher-mode signatures such as Ps-P12 by x-ray self-emission images.On the contrary,signatures of lower-mode such as P2 remain clear at all contour levels and spatial resolutions.These key results can help determine the optimal diagnostics,laser,and target parameters for implosion experiments.Recent typical hot-spot asymmetry measurements and applications on the Shenguang 100 kJ class laser facility are also reported.
基金supported by the National Natural Science Foundation of China (No. 51175442)the Fundamental Research Funds for the Central Universities (SWJTU12CX040)
文摘Levitation chassis, as an extremely important component of maglev vehicles, provides functions of transmitting levitation force and steering force, and directly affects the safety performance of the vehicle. Based on the vertical dynamics model of the levitation chassis, kinetic equations of the model are established, and a simulation program is designed to analyze the structural decoupling function of the chassis, especially under the influence of elastic constraints between the left and right modules, which are exclusively owned by maglev vehicles. A finite element model of the levitation chassis based on left-right decoupling is constructed. Analysis results of the model show that the mechanical properties of the chassis tailored for the vehicle meet the design requirements, and the stiffness and strength is adequate to bear the weight of the whole vehicle.
