The Fischer–Tropsch to olefins（FTO） process is a method for the direct conversion of synthesis gas to lower C–Colefins. Carbon-supported iron carbide nanoparticles are attractive catalysts for this reaction.The ca...The Fischer–Tropsch to olefins（FTO） process is a method for the direct conversion of synthesis gas to lower C–Colefins. Carbon-supported iron carbide nanoparticles are attractive catalysts for this reaction.The catalytic activity can be improved and undesired formation of alkanes can be suppressed by the addition of sodium and sulfur as promoters but the influence of their content and ratio remains poorly understood and the promoted catalysts often suffer from rapid deactivation due to particle growth. A series of carbon black-supported iron catalysts with similar iron content and nominal sodium/sulfur loadings of 1–30/0.5–5 wt% with respect to iron are prepared and characterized under FTO conditions at 1and 10 bar syngas pressure to illuminate the influence of the promoter level on the catalytic properties.Iron particles and promoters undergo significant reorganization during FTO operation under industrially relevant conditions. Low sodium content（1–3 wt%） leads to a delay in iron carbide formation. Sodium contents of 15–30 wt% lead to rapid loss of catalytic activity due to the covering of the iron surface with promoters during particle growth under FTO operation. Higher activity and slower loss of activity are observed at low promoter contents（1–3 wt% sodium and 0.5–1 wt% sulfur） but a minimum amount of alkali is required to effectively suppress methane and C–Cparaffin formation. A reference catalyst support（carbide-derived carbon aerogel） shows that the optimum promoter level depends on iron particle size and support pore structure.展开更多
In this work, MoOx promoted Ir/SiO2 catalysts were prepared and used for the selective hydrogenolysis of tetrahydrofurfuryl alcohol （THFA） to 1,5-pentanediol in a continuous flow reactor. The effects of different no...In this work, MoOx promoted Ir/SiO2 catalysts were prepared and used for the selective hydrogenolysis of tetrahydrofurfuryl alcohol （THFA） to 1,5-pentanediol in a continuous flow reactor. The effects of different noble metals （Ir, Pt, Pd, Ru, Rh）, supports and Ir contents were screened. Among the investigated catalysts, 4 wt%Ir-MoOx/SiO2 with a Mo/Ir atomic ratio of 0.13 exhibited the best catalytic performance. The synergy between Ix particles and the partially reduced isolated MoOx species attached on them is essential for the excellent catalytic performance of Ix-MoOx/SiO2. The catalyst exhibited a better hydrogenolysis efficiency of THFA with the selectivity of 1,5-pentanediol of 65%-74% at a conversion of THFA of 70%-75% when the initial THFA concentration is ranging from 20 wt% and 40 wt%. And higher system pressure was also in favor of the conversion of THFA. During a stability test, the conversion of THFA and 1,5-pentanediol yield over Ix-MoOz/SiO2 decreased with reaction time, which can be explained by the leaching of Mo species during the reaction.展开更多
The surface nature of fresh Mo2N/Al2O3, Mo2C/Al2O3 and/MoP/Al2O3 catalysts, which were synthesized directly in the IR cell to avoid passivation, were characterized by in situ IR spectroscopy with CO as a probe molecul...The surface nature of fresh Mo2N/Al2O3, Mo2C/Al2O3 and/MoP/Al2O3 catalysts, which were synthesized directly in the IR cell to avoid passivation, were characterized by in situ IR spectroscopy with CO as a probe molecule. CO adsorbed on fresh catalysts showed characteristic IR bands at 2045 cm-1 for Mo2N/Al2O3 catalyst, 2054 cm-1 for MozC/Al2O3 catalyst and 2037 cm-1 for MoP/Al2O3 catalyst, respectively. A strong band at 2200 cm-1 for Mo2N/Al2O3 catalyst, which could be ascribed to NCO species formed when CO reacted upon surface active nitrogen atoms, and a weak band at 2196 cm-1 for Mo2C/Al2O3 catalyst, which could be attributed to CCO species, were also detected. CO adsorbed on fresh Mo2N/Al2O3 catalyst, Mo2C/Al2O3 catalyst and MoP/Al2O3 catalyst, showed strong molecular adsorption, just like noble metals. Our experimental results are bolstered by direct IR evidence demonstrating the similarity in surface electronic property between the fresh Mo2N/Al2O3, Mo2C/Al2O3 and MoP/Al2O3 catalysts and noble metals.展开更多
The adsorption of acetonitrile and its co-adsorption with CO on fresh Mo_2C/Al_2O_3 catalyst have been studied by insitu FT-IR spectroscopy.Linearly adsorbed CH_3CN and CH_3CH_2NH_2 were formed after CH_3CN adsorption...The adsorption of acetonitrile and its co-adsorption with CO on fresh Mo_2C/Al_2O_3 catalyst have been studied by insitu FT-IR spectroscopy.Linearly adsorbed CH_3CN and CH_3CH_2NH_2 were formed after CH_3CN adsorption on the Mo_2C/ Al_2O_3 catalyst.The appearance of a strong band at 1578 cm^(-1) indicates that CH_3CN was reactive with hydrogen on the Mo_2C/Al_2O_3 catalyst.展开更多
The novel Ni-Ir/γ-Al2O3 catalyst, denoted as NIA-P, was prepared by high-frequency cold plasma direct reduction method under ambient conditions without thermal treatment, and the conventional sample, denoted as NIA-C...The novel Ni-Ir/γ-Al2O3 catalyst, denoted as NIA-P, was prepared by high-frequency cold plasma direct reduction method under ambient conditions without thermal treatment, and the conventional sample, denoted as NIA-CR, was prepared by impregnation, thermal calcination, and then by H2 reduction method. The effects of reduction methods on the catalysts for ammonia decomposition were studied, and they were characterized by XRD, N2 adsorption, XPS, and H2-TPD. It was found that the plasma-reduced NIA-P sample showed a better catalytic performance, over which ammonia conversion was 68.9%, at T = 450℃, P = 1 atm, and GHSV = 30, 000 h^-1. It was 31.7% higher than that of the conventional NIA-CR sample. XRD results showed that the crystallite size decreased for the sample with plasma reduction, and the dispersion of active components was improved. There were more active components on the surface of the NIA-P sample from the XPS results. This effect resulted in the higher activity for decomposition of ammonia. Meanwhile, the plasma process significantly decreased the time of preparing catalyst.展开更多
Partial oxidation of methane to syngas （POM） over Rh/SiO2 catalyst was investigated using in-situ FT-IR. When methane interacted with 1.0wt%Rh/SiO2 catalyst, it was dissociated to adsorbed hydrogen and CHx species. ...Partial oxidation of methane to syngas （POM） over Rh/SiO2 catalyst was investigated using in-situ FT-IR. When methane interacted with 1.0wt%Rh/SiO2 catalyst, it was dissociated to adsorbed hydrogen and CHx species. The adsorbed hydrogen atoms were transferred to SiO2 surface by ＂spill-over＂ and reacted with lattice oxygen to form surface -OH species. POM mechanism was investigated over Rh/SiO2 catalyst using in-situ FT-IR. It was found that CO2 was formed before CO could be detected when CH4 and O2 were introduced over the preoxidized Rh/SiO2 catalyst, whereas CO was detected before CO2 was formed over the prereduced Rh/SiO2 catalyst.展开更多
The surface species formed from the adsorption of 1,3-butadiene and 1,3-butadiene hydrogenation over the fresh Mo2C/γ-Al2O3 catalyst was studied by in situ IR spectroscopy. It is found that 1,3-butadiene adsorption o...The surface species formed from the adsorption of 1,3-butadiene and 1,3-butadiene hydrogenation over the fresh Mo2C/γ-Al2O3 catalyst was studied by in situ IR spectroscopy. It is found that 1,3-butadiene adsorption on the Mo2C/γ-Al2O3 catalyst mainly forms π-adsorbed butadiene(πs and πd) and σ-bonded surface species. These species are adsorbed mainly on the surface Moδ+(0<δ<2) sites as evidenced by co-adsorption of 1,3-butadiene and CO on the fresh Mo2C/γ-Al2O3 catalyst. The IR spectrometric analysis show that hydrogenation of 1,3-butadiene over fresh Mo2C/γ-Al2O3 catalyst produces mainly butane coupled with a small portion of butene. The selectivity of butene during the hydrogenation of 1,3-butadiene over fresh Mo2C/γ-Al2O3 catalyst might be explained by the adsorption mode of adsorbed 1,3-butadiene. Additionally, the active sites of the fresh Mo2C/γ-Al2O3 catalyst may be covered by coke during the hydrogenation reaction of 1,3-butadiene. The treatment with hydrogen at 673 K cannot remove the coke deposits from the surface of the Mo2C/γ-Al2O3 catalyst.展开更多
The adsorption of acetonitrile, the co-adsorption of acetonitrile with CO, and hydrogenation of acetonitrile on fresh Mo2C/γ-Al2O3 catalyst were studied by in situ IR spectroscopy. It was found out that CH3CN exhibit...The adsorption of acetonitrile, the co-adsorption of acetonitrile with CO, and hydrogenation of acetonitrile on fresh Mo2C/γ-Al2O3 catalyst were studied by in situ IR spectroscopy. It was found out that CH3CN exhibited strong interaction with the fresh Mo2C/γ-Al2O3 catalyst and was adsorbed mainly on Moδ+ sites of fresh Mo2C/γ-Al2O3 catalyst. Moreover, CH3CN could affect the shifting of IR spectra for CO adsorption towards a lower wave number. The IR spectroscopic study on acetonitrile hydrogenation showed that CH3CN could be easily hydrogenated in the presence of H2 on the Mo2C/γ-Al2O3 catalyst. Furthermore, it was observed that CH3 CN could be selectively hydrogenated to imines on fresh Mo2C/γ-Al2O3 catalyst. Additionally, the active sites of fresh Mo2C/γ-Al2O3 catalyst might be covered with coke during the hydrogenation reaction of acetonitrile. The treatment of catalyst with hydrogen at 673 K could not completely remove coke deposits on the surface of the Mo2C/γ-Al2O3 catalyst.展开更多
Au/Al2O3 catalyst was prepared by a modified anion impregnation method and investigated with respect to its initial activity and stability for low-temperature CO oxidation.The activity changes of the catalyst were exa...Au/Al2O3 catalyst was prepared by a modified anion impregnation method and investigated with respect to its initial activity and stability for low-temperature CO oxidation.The activity changes of the catalyst were examined after separate treatment in CO＋O2 or CO2 ＋O2 .Furthermore,in situ FT-IR studies were performed to investigate the species on the surface when CO or CO＋O2 or CO2 ＋O2 was selected separately as adsorption gas.The results showed that Au/Al2O3 catalyst exhibited very high initial activity,but the catalytic activity was found to decrease gradually during CO oxidation with time on stream.And also,the activity of the catalyst declined after treatment in CO＋O2 or CO2 ＋O2 .The formation and accumulation of carbonate-like species during CO oxidation or treatment in CO＋O2 or CO2 ＋O2 might be mainly responsible for the activity decrease,which was reversible.展开更多
研究电流型电化学氨气传感器阳极碳载Ir(Ir/C)催化剂电催化NH3氧化性能.实验表明,在NaC lO4中性电解液中,Ir/C催化剂对NH3氧化的电催化性能与Ir载量有关.其中以Ir载量为10%(by m ass)的Ir/C催化剂的电催化性能最好,稳定性和灵敏度也最高...研究电流型电化学氨气传感器阳极碳载Ir(Ir/C)催化剂电催化NH3氧化性能.实验表明,在NaC lO4中性电解液中,Ir/C催化剂对NH3氧化的电催化性能与Ir载量有关.其中以Ir载量为10%(by m ass)的Ir/C催化剂的电催化性能最好,稳定性和灵敏度也最高.此外,NH3在不同载量的Ir/C催化剂上电催化氧化的电流密度与NH3浓度均呈现出良好的线性关系,此类Ir/C催化剂在电流型电化学氨气传感器中可望有良好的应用前景.展开更多
The effect of acid component including various conventional acids and tungstic compounds on glucose hydrogenation over a series of binary catalyst system containing Ru/C catalyst was investigated. The results showed t...The effect of acid component including various conventional acids and tungstic compounds on glucose hydrogenation over a series of binary catalyst system containing Ru/C catalyst was investigated. The results showed that HC1, H2SO4, H3BO3, H3PO4, and HNO3 had negligible effect, while all the tungstic compounds imposed inhibiting effects on the hydrogenation of glucose over Ru/C catalyst, and the suppressing effect followed the order of H2WO4〉HPW〉WO3〉AMT〉HSiW. This order is the same as the order of ethylene glycol （EG） yields in the one-pot conversion of glucose to EG, suggesting the important role of competition between glucose hydrogenation and retro-aldol condensation in controlling the selectivity of EG.展开更多
Alloying degree, particle size and the level of dispersion are the key structural parameters of Pt-Ru/C catalyst in fuel cells. Solvent（s） used in the preparation process can affect the particle size and alloying de...Alloying degree, particle size and the level of dispersion are the key structural parameters of Pt-Ru/C catalyst in fuel cells. Solvent（s） used in the preparation process can affect the particle size and alloying degree of the object substance, which lead to a great positive impact on its properties. In this work, three types of solvents and their mixtures were used in preparation of the Pt-Ru/C catalysts by chemical reduction of metal precursors with sodium borohydride at room temperature. The structure of the catalysts was characterized by X-ray diffraction （XRD） and Transmission electron microscopy （TEM）. The catalytic activity and stability for methanol electro-oxidation were studied by Cyclic Voltammetry （CV） and Chronoamperometry （CA）. Pt-Ru/C catalyst prepared in H2O or binary solvents of H2O and isopropanol had large particle size and low alloying degree leading to low catalytic activity and less stability in methanol electro-oxidation. When tetrahydrofuran was added to the above solvent systems, Pt-Ru/C catalyst prepared had smaller particle size and higher alloying degree which resulted in better catalytic activity, lower onset and peak potentials, compared with the above catalysts. Moreover, the catalyst prepared in ternary solvents of isopropanol, water and tetrahydrofuran had the smallest particle size, and the high alloying degree and the dispersion kept unchanged. Therefore, this kind of catalyst showed the highest catalytic activity and good stability for methanol electro-oxidation.展开更多
基金supported by a Post Doc grant of the German Academic Exchange Service(Deutscher Akademischer Austauschdienst,DAAD grant no.91552012)by the European Research Council(EU FP7 ERC advanced grant no.338846)
文摘The Fischer–Tropsch to olefins（FTO） process is a method for the direct conversion of synthesis gas to lower C–Colefins. Carbon-supported iron carbide nanoparticles are attractive catalysts for this reaction.The catalytic activity can be improved and undesired formation of alkanes can be suppressed by the addition of sodium and sulfur as promoters but the influence of their content and ratio remains poorly understood and the promoted catalysts often suffer from rapid deactivation due to particle growth. A series of carbon black-supported iron catalysts with similar iron content and nominal sodium/sulfur loadings of 1–30/0.5–5 wt% with respect to iron are prepared and characterized under FTO conditions at 1and 10 bar syngas pressure to illuminate the influence of the promoter level on the catalytic properties.Iron particles and promoters undergo significant reorganization during FTO operation under industrially relevant conditions. Low sodium content（1–3 wt%） leads to a delay in iron carbide formation. Sodium contents of 15–30 wt% lead to rapid loss of catalytic activity due to the covering of the iron surface with promoters during particle growth under FTO operation. Higher activity and slower loss of activity are observed at low promoter contents（1–3 wt% sodium and 0.5–1 wt% sulfur） but a minimum amount of alkali is required to effectively suppress methane and C–Cparaffin formation. A reference catalyst support（carbide-derived carbon aerogel） shows that the optimum promoter level depends on iron particle size and support pore structure.
基金supported by the National Natural Science Foundation of China(No.21106143,No.21277140)100-Talent Project of Dalian Institute of Chemical Physics(DICP)+1 种基金the Independent Innovation Foundation of State Key Laboratory of Catalysis(No.R201113)the Zhejiang Provincial Natural Science Foundation of China(LR12E02001)
文摘In this work, MoOx promoted Ir/SiO2 catalysts were prepared and used for the selective hydrogenolysis of tetrahydrofurfuryl alcohol （THFA） to 1,5-pentanediol in a continuous flow reactor. The effects of different noble metals （Ir, Pt, Pd, Ru, Rh）, supports and Ir contents were screened. Among the investigated catalysts, 4 wt%Ir-MoOx/SiO2 with a Mo/Ir atomic ratio of 0.13 exhibited the best catalytic performance. The synergy between Ix particles and the partially reduced isolated MoOx species attached on them is essential for the excellent catalytic performance of Ix-MoOx/SiO2. The catalyst exhibited a better hydrogenolysis efficiency of THFA with the selectivity of 1,5-pentanediol of 65%-74% at a conversion of THFA of 70%-75% when the initial THFA concentration is ranging from 20 wt% and 40 wt%. And higher system pressure was also in favor of the conversion of THFA. During a stability test, the conversion of THFA and 1,5-pentanediol yield over Ix-MoOz/SiO2 decreased with reaction time, which can be explained by the leaching of Mo species during the reaction.
基金supported by the National Nature Science Foundation of China(No.20903054).
文摘The surface nature of fresh Mo2N/Al2O3, Mo2C/Al2O3 and/MoP/Al2O3 catalysts, which were synthesized directly in the IR cell to avoid passivation, were characterized by in situ IR spectroscopy with CO as a probe molecule. CO adsorbed on fresh catalysts showed characteristic IR bands at 2045 cm-1 for Mo2N/Al2O3 catalyst, 2054 cm-1 for MozC/Al2O3 catalyst and 2037 cm-1 for MoP/Al2O3 catalyst, respectively. A strong band at 2200 cm-1 for Mo2N/Al2O3 catalyst, which could be ascribed to NCO species formed when CO reacted upon surface active nitrogen atoms, and a weak band at 2196 cm-1 for Mo2C/Al2O3 catalyst, which could be attributed to CCO species, were also detected. CO adsorbed on fresh Mo2N/Al2O3 catalyst, Mo2C/Al2O3 catalyst and MoP/Al2O3 catalyst, showed strong molecular adsorption, just like noble metals. Our experimental results are bolstered by direct IR evidence demonstrating the similarity in surface electronic property between the fresh Mo2N/Al2O3, Mo2C/Al2O3 and MoP/Al2O3 catalysts and noble metals.
文摘The adsorption of acetonitrile and its co-adsorption with CO on fresh Mo_2C/Al_2O_3 catalyst have been studied by insitu FT-IR spectroscopy.Linearly adsorbed CH_3CN and CH_3CH_2NH_2 were formed after CH_3CN adsorption on the Mo_2C/ Al_2O_3 catalyst.The appearance of a strong band at 1578 cm^(-1) indicates that CH_3CN was reactive with hydrogen on the Mo_2C/Al_2O_3 catalyst.
基金National Natural Science Foundation of China (20590360)New Century Excellent Talent Project of China (NCET-05-0783)
文摘The novel Ni-Ir/γ-Al2O3 catalyst, denoted as NIA-P, was prepared by high-frequency cold plasma direct reduction method under ambient conditions without thermal treatment, and the conventional sample, denoted as NIA-CR, was prepared by impregnation, thermal calcination, and then by H2 reduction method. The effects of reduction methods on the catalysts for ammonia decomposition were studied, and they were characterized by XRD, N2 adsorption, XPS, and H2-TPD. It was found that the plasma-reduced NIA-P sample showed a better catalytic performance, over which ammonia conversion was 68.9%, at T = 450℃, P = 1 atm, and GHSV = 30, 000 h^-1. It was 31.7% higher than that of the conventional NIA-CR sample. XRD results showed that the crystallite size decreased for the sample with plasma reduction, and the dispersion of active components was improved. There were more active components on the surface of the NIA-P sample from the XPS results. This effect resulted in the higher activity for decomposition of ammonia. Meanwhile, the plasma process significantly decreased the time of preparing catalyst.
基金This study was supported by the grant of 2004C31053 from the Ministry of Science and Technology of Zhejiang Province, China, and the grant of Y404305 from the Natural Science Foundation of Zhejiang Province, Chinathe grant of 20673101, 20673102 from National Natural Science Foundation of China.
文摘Partial oxidation of methane to syngas （POM） over Rh/SiO2 catalyst was investigated using in-situ FT-IR. When methane interacted with 1.0wt%Rh/SiO2 catalyst, it was dissociated to adsorbed hydrogen and CHx species. The adsorbed hydrogen atoms were transferred to SiO2 surface by ＂spill-over＂ and reacted with lattice oxygen to form surface -OH species. POM mechanism was investigated over Rh/SiO2 catalyst using in-situ FT-IR. It was found that CO2 was formed before CO could be detected when CH4 and O2 were introduced over the preoxidized Rh/SiO2 catalyst, whereas CO was detected before CO2 was formed over the prereduced Rh/SiO2 catalyst.
基金financially supported by the National Natural Science Foundation of China(No.20903054)Liaoning Provincial Natural Science Foundation(No.2014020107)+1 种基金Program for Liaoning excellent talents in university(No.LJQ2014041)sponsored by the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry(SRF for ROCS,SEM)
文摘The surface species formed from the adsorption of 1,3-butadiene and 1,3-butadiene hydrogenation over the fresh Mo2C/γ-Al2O3 catalyst was studied by in situ IR spectroscopy. It is found that 1,3-butadiene adsorption on the Mo2C/γ-Al2O3 catalyst mainly forms π-adsorbed butadiene(πs and πd) and σ-bonded surface species. These species are adsorbed mainly on the surface Moδ+(0<δ<2) sites as evidenced by co-adsorption of 1,3-butadiene and CO on the fresh Mo2C/γ-Al2O3 catalyst. The IR spectrometric analysis show that hydrogenation of 1,3-butadiene over fresh Mo2C/γ-Al2O3 catalyst produces mainly butane coupled with a small portion of butene. The selectivity of butene during the hydrogenation of 1,3-butadiene over fresh Mo2C/γ-Al2O3 catalyst might be explained by the adsorption mode of adsorbed 1,3-butadiene. Additionally, the active sites of the fresh Mo2C/γ-Al2O3 catalyst may be covered by coke during the hydrogenation reaction of 1,3-butadiene. The treatment with hydrogen at 673 K cannot remove the coke deposits from the surface of the Mo2C/γ-Al2O3 catalyst.
基金financially supported by the National Natural Science Foundation of China (No. 21573101)the Liaoning Provincial Natural Science Foundation (No. 2014020107)+1 种基金the Program for Liaoning Excellent Talents in Universities (No. LJQ2014041)sponsored by the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry (SRF for ROCS, SEM)
文摘The adsorption of acetonitrile, the co-adsorption of acetonitrile with CO, and hydrogenation of acetonitrile on fresh Mo2C/γ-Al2O3 catalyst were studied by in situ IR spectroscopy. It was found out that CH3CN exhibited strong interaction with the fresh Mo2C/γ-Al2O3 catalyst and was adsorbed mainly on Moδ+ sites of fresh Mo2C/γ-Al2O3 catalyst. Moreover, CH3CN could affect the shifting of IR spectra for CO adsorption towards a lower wave number. The IR spectroscopic study on acetonitrile hydrogenation showed that CH3CN could be easily hydrogenated in the presence of H2 on the Mo2C/γ-Al2O3 catalyst. Furthermore, it was observed that CH3 CN could be selectively hydrogenated to imines on fresh Mo2C/γ-Al2O3 catalyst. Additionally, the active sites of fresh Mo2C/γ-Al2O3 catalyst might be covered with coke during the hydrogenation reaction of acetonitrile. The treatment of catalyst with hydrogen at 673 K could not completely remove coke deposits on the surface of the Mo2C/γ-Al2O3 catalyst.
基金supported by the Science and Research Reward Fund Program of Shandong Excellent Young Scientist of China (2007BS04033)
文摘Au/Al2O3 catalyst was prepared by a modified anion impregnation method and investigated with respect to its initial activity and stability for low-temperature CO oxidation.The activity changes of the catalyst were examined after separate treatment in CO＋O2 or CO2 ＋O2 .Furthermore,in situ FT-IR studies were performed to investigate the species on the surface when CO or CO＋O2 or CO2 ＋O2 was selected separately as adsorption gas.The results showed that Au/Al2O3 catalyst exhibited very high initial activity,but the catalytic activity was found to decrease gradually during CO oxidation with time on stream.And also,the activity of the catalyst declined after treatment in CO＋O2 or CO2 ＋O2 .The formation and accumulation of carbonate-like species during CO oxidation or treatment in CO＋O2 or CO2 ＋O2 might be mainly responsible for the activity decrease,which was reversible.
文摘研究电流型电化学氨气传感器阳极碳载Ir(Ir/C)催化剂电催化NH3氧化性能.实验表明,在NaC lO4中性电解液中,Ir/C催化剂对NH3氧化的电催化性能与Ir载量有关.其中以Ir载量为10%(by m ass)的Ir/C催化剂的电催化性能最好,稳定性和灵敏度也最高.此外,NH3在不同载量的Ir/C催化剂上电催化氧化的电流密度与NH3浓度均呈现出良好的线性关系,此类Ir/C催化剂在电流型电化学氨气传感器中可望有良好的应用前景.
基金supported by the National Natural Science Foundation of China(Grants 21176235 and 21206159)
文摘The effect of acid component including various conventional acids and tungstic compounds on glucose hydrogenation over a series of binary catalyst system containing Ru/C catalyst was investigated. The results showed that HC1, H2SO4, H3BO3, H3PO4, and HNO3 had negligible effect, while all the tungstic compounds imposed inhibiting effects on the hydrogenation of glucose over Ru/C catalyst, and the suppressing effect followed the order of H2WO4〉HPW〉WO3〉AMT〉HSiW. This order is the same as the order of ethylene glycol （EG） yields in the one-pot conversion of glucose to EG, suggesting the important role of competition between glucose hydrogenation and retro-aldol condensation in controlling the selectivity of EG.
基金supported by 863 Project(No.2006AA05Z102)the Cultivation Fund of the Key Scientific and Technical Innovation Project,Ministry of Education of China (No.707050)+1 种基金Specialized Research Fund for the Doctoral Program of Higher Education (No.20060610023)Chengdu Natural Science Foundation (Nos.06GGYB449GX-030,and 07GGZD139GX)
文摘Alloying degree, particle size and the level of dispersion are the key structural parameters of Pt-Ru/C catalyst in fuel cells. Solvent（s） used in the preparation process can affect the particle size and alloying degree of the object substance, which lead to a great positive impact on its properties. In this work, three types of solvents and their mixtures were used in preparation of the Pt-Ru/C catalysts by chemical reduction of metal precursors with sodium borohydride at room temperature. The structure of the catalysts was characterized by X-ray diffraction （XRD） and Transmission electron microscopy （TEM）. The catalytic activity and stability for methanol electro-oxidation were studied by Cyclic Voltammetry （CV） and Chronoamperometry （CA）. Pt-Ru/C catalyst prepared in H2O or binary solvents of H2O and isopropanol had large particle size and low alloying degree leading to low catalytic activity and less stability in methanol electro-oxidation. When tetrahydrofuran was added to the above solvent systems, Pt-Ru/C catalyst prepared had smaller particle size and higher alloying degree which resulted in better catalytic activity, lower onset and peak potentials, compared with the above catalysts. Moreover, the catalyst prepared in ternary solvents of isopropanol, water and tetrahydrofuran had the smallest particle size, and the high alloying degree and the dispersion kept unchanged. Therefore, this kind of catalyst showed the highest catalytic activity and good stability for methanol electro-oxidation.
