Homogeneous, high concentrated ceramic suspensions wi th low viscosity are the key controlling factors for the production of ceramic c omponents through colloidal processing. A well-dispersed suspension can be obta in...Homogeneous, high concentrated ceramic suspensions wi th low viscosity are the key controlling factors for the production of ceramic c omponents through colloidal processing. A well-dispersed suspension can be obta ined by choosing suitable dispersant, solvent, particle size distribution etc. B esides these factors, the homogenizing procedure is also a key step. In this paper, reaction sialon suspensions were prepared using 3-wt% KD1 as dis persant in organic media composed of 60-vol% methyletheylketone and 40-vol% et hanol. Different homogenizing procedures have been used and compared, including planetary milling, low energy ball milling and ultrasonic disaggregation. The ef fects of different homogenizing routes and mixing times on the rheology and stab ility of suspensions, and on the microstructure of slip casting green bodies, ha ve been studied. The varying dispersion efficiencies observed could be attribute d to differences in deagglomeration degrees achieved and in adsorption amount of dispersant onto the surface of reaction sialon powders.展开更多
Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision p...Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision payoff functions hinge on individual covariates and the choices of their friends.However,peer pressure would be misidentified and induce a non-negligible bias when incomplete covariates are involved in the game model.For this reason,we develop a generalized constant peer effects model based on homogeneity structure in dynamic social networks.The new model can effectively avoid bias through homogeneity pursuit and can be applied to a wider range of scenarios.To estimate peer pressure in the model,we first present two algorithms based on the initialize expand merge method and the polynomial-time twostage method to estimate homogeneity parameters.Then we apply the nested pseudo-likelihood method and obtain consistent estimators of peer pressure.Simulation evaluations show that our proposed methodology can achieve desirable and effective results in terms of the community misclassification rate and parameter estimation error.We also illustrate the advantages of our model in the empirical analysis when compared with a benchmark model.展开更多
Based on microstructure analysis,diffusion theory,and hot deformation experiments,the solidification microstructure and element segregation of the Alloy 625 Plus ingot,the diffusion kinetics of Ti,Nb,and Mo during hom...Based on microstructure analysis,diffusion theory,and hot deformation experiments,the solidification microstructure and element segregation of the Alloy 625 Plus ingot,the diffusion kinetics of Ti,Nb,and Mo during homogenization and the hot deformation behavior of the homogenized ingot were investigated in this study.The results indicate that:(1)the solidified ingot exhibits a typical dendritic microstructure,and significant element segregation occurs,leading to the presence of Ti,Nb,and Mo-rich precipitates in the interdendritic region;(2)Following homogenization,the degree of element segregation in the ingot is significantly reduced.The diffusion coefficients(D)of Ti,Nb,and Mo under various homogenization conditions were calculated.Subsequently,the diffusion constants(D_(0))and activation energies(Q)of Ti,Nb,and Mo were obtained to be 0.01432,0.00397 and 0.00195 cm^(2)/s and 244.851,230.312,and 222.125 kJ/mol,respectively.Finally,the diffusion kinetics formulas for Ti,Nb,and Mo in Alloy 625 Plus were established.After homogenization at 1220℃for 8 h,the alloy exhibits low deformation resistance,a high degree of recrystallization,and optimal deformation coordination ability.Therefore,this represents a rational single-stage homogenization process.展开更多
The goethite residue generated from zinc hydrometallurgy is classified as hazardous solid waste,produced in large quantities,and results in significant zinc loss.The study was conducted on removing iron from FeSO_(4)-...The goethite residue generated from zinc hydrometallurgy is classified as hazardous solid waste,produced in large quantities,and results in significant zinc loss.The study was conducted on removing iron from FeSO_(4)-ZnSO_(4) solution,employing seed-induced nucleation methods.Analysis of the iron removal rate,residue structure,morphology,and elemental composition involved ICP,XRD,FT-IR,and SEM.The existing state of zinc was investigated by combining step-by-step dissolution using hydrochloric acid.Concurrently,iron removal tests were extended to industrial solutions to assess the influence of seeds and solution pH on zinc loss and residue yield.The results revealed that seed addition increased the iron removal rate by 3%,elevated the residual iron content by 6.39%,and mitigated zinc loss by 29.55%in the simulated solution.Seed-induced nucleation prevented excessive nuclei formation,fostering crystal stable growth and high crystallinity.In addition,the zinc content of surface adsorption and crystal internal embedding in the residue was determined,and the zinc distribution on the surface was dense.In contrast,the total amount of zinc within the crystal was higher.The test results in the industrial solution demonstrated that the introduction of seeds expanded the pH range for goethite formation and growth,and the zinc loss per ton of iron removed was reduced by 50.91 kg(34.12%)and the iron residue reduced by 0.17 t(8.72%).展开更多
Adaptive detection of range-spread targets is considered in the presence of subspace interference plus Gaussian clutter with unknown covariance matrix.The target signal and interference are supposed to lie in two line...Adaptive detection of range-spread targets is considered in the presence of subspace interference plus Gaussian clutter with unknown covariance matrix.The target signal and interference are supposed to lie in two linearly independent subspaces with deterministic but unknown coordinates.Relying on the two-step criteria,two adaptive detectors based on Gradient tests are proposed,in homogeneous and partially homogeneous clutter plus subspace interference,respectively.Both of the proposed detectors exhibit theoretically constant false alarm rate property against unknown clutter covariance matrix as well as the power level.Numerical results show that,the proposed detectors have better performance than their existing counterparts,especially for mismatches in the signal steering vectors.展开更多
Two spodumene samples for helium isotope standard were prepared. According to the preparation criterion on first grade national standard materials, homogeneity tests of helium contents and isotope compositions of two ...Two spodumene samples for helium isotope standard were prepared. According to the preparation criterion on first grade national standard materials, homogeneity tests of helium contents and isotope compositions of two samples were carried out using the heat melt method. The homogeneity tests and certification analysis show that 4He contents and 3He/4He ratios of two reference material samples are homogeneous. Afterward two standard samples were distributed to four laboratories for cooperative fixed values. All data of various laboratories submit to normal distribution and not abnormity values. The average values of each laboratory are recommended as values of two spodumene samples for helium isotope standard.展开更多
To determine compositions,homogenization pressures and isopleths of CO2-H2O-NaCl fluid inclusions,an improved activity-fugacity model is developed to calculate CO2solubility in aqueous NaCl solutions.The model can pre...To determine compositions,homogenization pressures and isopleths of CO2-H2O-NaCl fluid inclusions,an improved activity-fugacity model is developed to calculate CO2solubility in aqueous NaCl solutions.The model can predict the solubility of CO2in aqueous NaCl solutions from 273 K to 723 K,from1 bar to 1500 bar and from 0 to 4.5 mol kg-1of NaCl,within or close to experimental uncertainties.The average deviation between the solubility predicted展开更多
The microstructural evolution of 2026 aluminum alloy during homogenization treatment was investigated by optical microscopy(OM),scanning electron microscopy(SEM),energy dispersive X-ray spectrometry(EDS),differential ...The microstructural evolution of 2026 aluminum alloy during homogenization treatment was investigated by optical microscopy(OM),scanning electron microscopy(SEM),energy dispersive X-ray spectrometry(EDS),differential scanning calorimetry(DSC)and X-ray diffraction(XRD).The results show that severe dendritic segregation exists in the as-cast 2026 alloy and the main secondary phases at grain boundary are S(Al2CuMg)andθ(Al2Cu)phases.Elements Cu,Mg and Mn distribute unevenly from grain boundary to the inside of as-cast alloy.With the increase of homogenization temperature or the prolongation of holding time,the residual phases gradually dissolve into the matrixα(Al)and all the elements become more homogenized.According to the results of microstructural evolution,differential scanning calorimetry and X-ray diffraction,the optimum homogenization parameter is at 490°C for 24 h,which is consistent with the result of homogenization kinetic analysis.展开更多
Effect of element cerium （Ce） on microstructure and mechanical properties of A1-Zn-Mg-Cu alloys has been investigated by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, differential s...Effect of element cerium （Ce） on microstructure and mechanical properties of A1-Zn-Mg-Cu alloys has been investigated by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, differential scanning calorimetry （DSC） and hardness test. The results show that addition of Ce can remarkably refine the as-cast grains and eutectic microstructure. A transformation from Mg（Zn,Cu,A1）2 phase to A12CuMg phase is observed during homogenization. Furthermore, the Ce addition introduces changes in the precipitation process and consequently in the age-hardening behavior of the alloy. Microstructural measurements reveal that the addition of Ce promotes the precipitation of η＇ phase, but it also partly retards the precipitation of GP zones. The density of precipitates decreases in a certain degree and rod-like η＇ precipitates increase when Ce content is from 0.2% to 0.4% （mass fraction）.展开更多
The microstructure evolutions of two A1-Zn-Mg alloys, one of which was alloyed with Sc and Zr, and the kinetics of A13（SCl-xZrx） precipitates in the A1-Zn-Mg alloy during homogenization were investigated. Both alloy...The microstructure evolutions of two A1-Zn-Mg alloys, one of which was alloyed with Sc and Zr, and the kinetics of A13（SCl-xZrx） precipitates in the A1-Zn-Mg alloy during homogenization were investigated. Both alloys under as-cast condition with supersaturated, non-equilibrium T（Mg32（A1, Zn）49） phase and impurities phase were displayed. When the homogenization temperatures are below 350 ~C, Zn and Mg atoms precipitate from matrix; however, when the temperatures are above 400 ~C, T phase dissolves into matrix, enhancing solid-solution strengthening. Kinetics of A13（Scl.xZrx） precipitates was studied based on Jmat Pro software calculation and the difference values between the hardness of the two alloys in each homogenization condition. The calculations predict that the Sc and Zr solubilities in ct-A1 decline with the presence of Mg and Zn. Investigation of the difference values reveals that when the temperature is between 300 ~C and 350 ~C, the nucleation rate of A13（Sc1-xZrx） precipitates is the highest and the strengthening effect from A13（SCl_xZrx） precipitates is the best. After homogenization at 470℃ for 12 h, non-equilibrium T phase disappears, while impurity phase remains. The mean diameter of A13（Scl_xZrx） precipitates is around 18 urn. Ideas about better fulfilling the potentials of Sc and Zr were proposed at last.展开更多
In order to expand the application of the basic magnesium carbonate in the field of flame retardant,the plate-like basic magnesium carbonate(Mg5(CO3)4(OH)2.4H2O)was prepared successfully by template-mediated/homogeneo...In order to expand the application of the basic magnesium carbonate in the field of flame retardant,the plate-like basic magnesium carbonate(Mg5(CO3)4(OH)2.4H2O)was prepared successfully by template-mediated/homogeneous precipitation method,using magnesium chloride hexahydrate(MgCl2.6H2O)and urea(CO(NH2)2)as reaction materials.Phase and morphology of the product were characterized by X-ray diffraction(XRD),scanning electron microscope(SEM)and atomic force microscope(AFM),respectively.The results showed that well-crystallized plate-like Mg5(CO3)4(OH)2.4H2O can be prepared at the water bath temperature of 100°C,water bath time of 24 h,the aging time of 5 h after adding organic template agent.The investigation on organic template mediated mechanism shows that the template affects the crystal morphology by changing surface energy of different crystal plane.Through a preliminary study on the growth mechanism of the product,it is found that the generation of the plate-like Mg5(CO3)4(OH)2.4H2O could be explained by two-dimensional nucleation/step growth mechanism.展开更多
The homogeneous dielectric barrier discharge(DBD) in atmospheric air is most favorable for polymer surface modification due to the low cost of operation and the ability of ambient on-line continuous uniform processing...The homogeneous dielectric barrier discharge(DBD) in atmospheric air is most favorable for polymer surface modification due to the low cost of operation and the ability of ambient on-line continuous uniform processing.In this paper,polypropylene(PP) films are treated using a homogeneous DBD plasma in atmospheric air.The surface properties of PP films are studied using contact angle and surface energy measurement,scanning electron microscopy (SEM) and Fourier transformed infrared spectroscopy(FTIR),and the aging effect after treatment when the treated materials are exposed to open air is also studied,with the modification mechanism being discussed.It is demonstrated that non-thermal plasmas generated by homogeneous DBD in atmospheric air is an effective way to enhance the surface properties of PP films.After the plasma treatment,the surface of PP film is etched,and oxygen-containing polar groups are introduced into the surface.These two processes can induce a remarkable decrease in water contact angle and a remarkable increase in surface energy,and the surface properties of PP films are improved accordingly.展开更多
OBJECTIVE To determine the characterization,anti-tumor efficacy and pharmacokinetics of bufalin-loaded PEGylated liposomes compared with bufalin entity.METHODS Bufalin-loaded PEGylated liposomes and bufalin-loaded lip...OBJECTIVE To determine the characterization,anti-tumor efficacy and pharmacokinetics of bufalin-loaded PEGylated liposomes compared with bufalin entity.METHODS Bufalin-loaded PEGylated liposomes and bufalin-loaded liposomes were prepared reproducibly with homogeneous particle size by the combination of thin film evaporation method and high pressure homogenization method.The particle size and zeta potential of the liposomes were determined by dynamic light scattering technique.The direct imaging of morphology of liposomes was charactered by transmission electron microscope.The content of bufalin in liposomes was analysed by HPLC method.The entrapment efficiency and the particle size was applied to assess the stability profile,after storage at 4℃ on day 0,7,15,30 and 90.The in-vitro release behaviours of bufalin from liposomes were conducted using dialysis bag technique at 37℃.In-vitro cytotoxicity studies were carried out using MTT[3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide]assay on several kinds of tumor cel lines including SW620,PC-3,MDA-MB-231,A549,U251,U87 and HepG2.In-vivo pharmacokinetic study of bufalin liposomes was evaluated by HPLC method.RESULTS Their mean particle sizes were 127.6 nm and 155.0 nm,mean zeta potentials were 2.24 m V and-18.5 m V,entrapment efficiencies were 76.31%and 78.40%,respectively.In-vitro release profile revealed that the release of bufalin in bufalin-loaded PEGylated liposomes was slower than that of bufalin-loaded liposomes.The cytotoxicity of blank liposomes has been found within acceptable range,whereas bufalin-loaded PEGylated liposomes showed enhanced cytotoxicity to U251 cells compared with bufalin entity.In-vivo pharmacokinetics indicated that bufalinloaded PEGylated liposomes could extend eliminate half-life time of bufalin in plasma in rats.CONCLUSION The results suggested that bufalin-loaded PEGylated liposomes improved the solubility and increased the drug concentration in plasma.展开更多
In order to improve the through-thickness homogeneity and properties of aviation aluminum alloy thick plate.The effect of heating-cooling retrogression and re-ageing on the performance of Al-8Zn-2Mg-2Cu alloy thick pl...In order to improve the through-thickness homogeneity and properties of aviation aluminum alloy thick plate.The effect of heating-cooling retrogression and re-ageing on the performance of Al-8Zn-2Mg-2Cu alloy thick plate was investigated by hardness tests, electrical conductivity tests and transmission electron microscopy(TEM) observation.Results revealed that, during retrogression heating, the fine pre-precipitates in surface layer dissolve more and the undissolved η′ or η phases are more coarsened than that of center layer. During slow cooling after retrogression,precipitates continue coarsening but with a lower rate and the secondary precipitation occurs in both layers. Finer precipitates resulting from the secondary precipitation are more in surface. However, the coarsening and secondary precipitation behaviors are restrained in both layers under quick cooling condition. The electrical conductivity and through-thickness homogeneity of precipitates increases while the hardness decreases with cooling rate decreasing. After the optimized non-isothermal retrogression and re-ageing(NRRA) including air-cooling retrogression, the throughthickness homogeneity which is evaluated by integrated retrogression effects has been improved to 94%. The tensile strength, fracture toughness and exfoliation corrosion grade of Al-8Zn-2Mg-2Cu alloy plate is 619 MPa, 24.7 MPa·m^(1/2)and EB, respectively, which indicates that the non-isothermal retrogression and re-aging(NRRA) could improve the mechanical properties and corrosion resistance with higher through-thickness homogeneity.展开更多
The present article deals with thermally stratified stagnation-point flow saturated in porous medium on surface of variable thickness along with more convincing and reliable surface condition termed as melting heat tr...The present article deals with thermally stratified stagnation-point flow saturated in porous medium on surface of variable thickness along with more convincing and reliable surface condition termed as melting heat transfer.Homogeneous–heterogeneous reaction and radiative effects have been further taken into account to reconnoiterproperties of heat transfer.Melting heat transfer and phenomenon of homogeneous–heterogeneous reaction have engrossed widespread utilization in purification of metals,welding process,electroslag melting,biochemical systems,catalysis and several industrial developments.Suitable transformations are utilized to attain a scheme of ordinary differential equations possessing exceedingly nonlinear nature.Homotopic process is employed to develop convergent solutions of the resulting problem.Discussion regarding velocity,thermal field and concentration distribution for several involved parameters is pivotal part.Graphical behaviors of skin friction coefficient and Nusselt number are also portrayed.Concentration of the reactants is found to depreciate as a result of strength of both heterogeneous and homogeneous reaction parameters.With existence of melting phenomenon,declining attitude of fluid temperature is observed for higher radiation parameter.展开更多
文摘Homogeneous, high concentrated ceramic suspensions wi th low viscosity are the key controlling factors for the production of ceramic c omponents through colloidal processing. A well-dispersed suspension can be obta ined by choosing suitable dispersant, solvent, particle size distribution etc. B esides these factors, the homogenizing procedure is also a key step. In this paper, reaction sialon suspensions were prepared using 3-wt% KD1 as dis persant in organic media composed of 60-vol% methyletheylketone and 40-vol% et hanol. Different homogenizing procedures have been used and compared, including planetary milling, low energy ball milling and ultrasonic disaggregation. The ef fects of different homogenizing routes and mixing times on the rheology and stab ility of suspensions, and on the microstructure of slip casting green bodies, ha ve been studied. The varying dispersion efficiencies observed could be attribute d to differences in deagglomeration degrees achieved and in adsorption amount of dispersant onto the surface of reaction sialon powders.
基金supported by the National Nature Science Foundation of China(71771201,72531009,71973001)the USTC Research Funds of the Double First-Class Initiative(FSSF-A-240202).
文摘Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision payoff functions hinge on individual covariates and the choices of their friends.However,peer pressure would be misidentified and induce a non-negligible bias when incomplete covariates are involved in the game model.For this reason,we develop a generalized constant peer effects model based on homogeneity structure in dynamic social networks.The new model can effectively avoid bias through homogeneity pursuit and can be applied to a wider range of scenarios.To estimate peer pressure in the model,we first present two algorithms based on the initialize expand merge method and the polynomial-time twostage method to estimate homogeneity parameters.Then we apply the nested pseudo-likelihood method and obtain consistent estimators of peer pressure.Simulation evaluations show that our proposed methodology can achieve desirable and effective results in terms of the community misclassification rate and parameter estimation error.We also illustrate the advantages of our model in the empirical analysis when compared with a benchmark model.
基金Project(52174303)supported by the National Natural Science Foundation of ChinaProject(2023JH2/101700302)supported by the Joint Program of Science and Technology Plans in Liaoning Province,China。
文摘Based on microstructure analysis,diffusion theory,and hot deformation experiments,the solidification microstructure and element segregation of the Alloy 625 Plus ingot,the diffusion kinetics of Ti,Nb,and Mo during homogenization and the hot deformation behavior of the homogenized ingot were investigated in this study.The results indicate that:(1)the solidified ingot exhibits a typical dendritic microstructure,and significant element segregation occurs,leading to the presence of Ti,Nb,and Mo-rich precipitates in the interdendritic region;(2)Following homogenization,the degree of element segregation in the ingot is significantly reduced.The diffusion coefficients(D)of Ti,Nb,and Mo under various homogenization conditions were calculated.Subsequently,the diffusion constants(D_(0))and activation energies(Q)of Ti,Nb,and Mo were obtained to be 0.01432,0.00397 and 0.00195 cm^(2)/s and 244.851,230.312,and 222.125 kJ/mol,respectively.Finally,the diffusion kinetics formulas for Ti,Nb,and Mo in Alloy 625 Plus were established.After homogenization at 1220℃for 8 h,the alloy exhibits low deformation resistance,a high degree of recrystallization,and optimal deformation coordination ability.Therefore,this represents a rational single-stage homogenization process.
基金Project(2018YFC1900403) supported by the National Key Research and Development Program of ChinaProject(CX20210197) supported by the Postgraduate Scientific Research Innovation Project of Hunan Province,China+1 种基金Project(202206370103) supported by the China Scholarship CouncilProject(2021zzts0115) supported by the Fundamental Research Funds for the Central Universities,China。
文摘The goethite residue generated from zinc hydrometallurgy is classified as hazardous solid waste,produced in large quantities,and results in significant zinc loss.The study was conducted on removing iron from FeSO_(4)-ZnSO_(4) solution,employing seed-induced nucleation methods.Analysis of the iron removal rate,residue structure,morphology,and elemental composition involved ICP,XRD,FT-IR,and SEM.The existing state of zinc was investigated by combining step-by-step dissolution using hydrochloric acid.Concurrently,iron removal tests were extended to industrial solutions to assess the influence of seeds and solution pH on zinc loss and residue yield.The results revealed that seed addition increased the iron removal rate by 3%,elevated the residual iron content by 6.39%,and mitigated zinc loss by 29.55%in the simulated solution.Seed-induced nucleation prevented excessive nuclei formation,fostering crystal stable growth and high crystallinity.In addition,the zinc content of surface adsorption and crystal internal embedding in the residue was determined,and the zinc distribution on the surface was dense.In contrast,the total amount of zinc within the crystal was higher.The test results in the industrial solution demonstrated that the introduction of seeds expanded the pH range for goethite formation and growth,and the zinc loss per ton of iron removed was reduced by 50.91 kg(34.12%)and the iron residue reduced by 0.17 t(8.72%).
基金supported by the National Natural Science Foundation of China(61971432)Taishan Scholar Project of Shandong Province(tsqn201909156)the Outstanding Youth Innovation Team Program of University in Shandong Province(2019KJN031)。
文摘Adaptive detection of range-spread targets is considered in the presence of subspace interference plus Gaussian clutter with unknown covariance matrix.The target signal and interference are supposed to lie in two linearly independent subspaces with deterministic but unknown coordinates.Relying on the two-step criteria,two adaptive detectors based on Gradient tests are proposed,in homogeneous and partially homogeneous clutter plus subspace interference,respectively.Both of the proposed detectors exhibit theoretically constant false alarm rate property against unknown clutter covariance matrix as well as the power level.Numerical results show that,the proposed detectors have better performance than their existing counterparts,especially for mismatches in the signal steering vectors.
基金Supported by National Natural Science Foundation of China(61370089)Anhui Province Natural Science Research(KJ2015A308)Natural Science Project of AnHui Xinhua University(2014Zr009)
文摘Two spodumene samples for helium isotope standard were prepared. According to the preparation criterion on first grade national standard materials, homogeneity tests of helium contents and isotope compositions of two samples were carried out using the heat melt method. The homogeneity tests and certification analysis show that 4He contents and 3He/4He ratios of two reference material samples are homogeneous. Afterward two standard samples were distributed to four laboratories for cooperative fixed values. All data of various laboratories submit to normal distribution and not abnormity values. The average values of each laboratory are recommended as values of two spodumene samples for helium isotope standard.
文摘To determine compositions,homogenization pressures and isopleths of CO2-H2O-NaCl fluid inclusions,an improved activity-fugacity model is developed to calculate CO2solubility in aqueous NaCl solutions.The model can predict the solubility of CO2in aqueous NaCl solutions from 273 K to 723 K,from1 bar to 1500 bar and from 0 to 4.5 mol kg-1of NaCl,within or close to experimental uncertainties.The average deviation between the solubility predicted
基金Project(2016B090931001)supported by Science and Technology Research and Development Program of Guangdong Province,China
文摘The microstructural evolution of 2026 aluminum alloy during homogenization treatment was investigated by optical microscopy(OM),scanning electron microscopy(SEM),energy dispersive X-ray spectrometry(EDS),differential scanning calorimetry(DSC)and X-ray diffraction(XRD).The results show that severe dendritic segregation exists in the as-cast 2026 alloy and the main secondary phases at grain boundary are S(Al2CuMg)andθ(Al2Cu)phases.Elements Cu,Mg and Mn distribute unevenly from grain boundary to the inside of as-cast alloy.With the increase of homogenization temperature or the prolongation of holding time,the residual phases gradually dissolve into the matrixα(Al)and all the elements become more homogenized.According to the results of microstructural evolution,differential scanning calorimetry and X-ray diffraction,the optimum homogenization parameter is at 490°C for 24 h,which is consistent with the result of homogenization kinetic analysis.
基金Project(2010CB731706) supported by the National Basic Research Program of China
文摘Effect of element cerium （Ce） on microstructure and mechanical properties of A1-Zn-Mg-Cu alloys has been investigated by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, differential scanning calorimetry （DSC） and hardness test. The results show that addition of Ce can remarkably refine the as-cast grains and eutectic microstructure. A transformation from Mg（Zn,Cu,A1）2 phase to A12CuMg phase is observed during homogenization. Furthermore, the Ce addition introduces changes in the precipitation process and consequently in the age-hardening behavior of the alloy. Microstructural measurements reveal that the addition of Ce promotes the precipitation of η＇ phase, but it also partly retards the precipitation of GP zones. The density of precipitates decreases in a certain degree and rod-like η＇ precipitates increase when Ce content is from 0.2% to 0.4% （mass fraction）.
基金Project(JPPT-115-2-948) supported by the National Civilian Matched Project of China
文摘The microstructure evolutions of two A1-Zn-Mg alloys, one of which was alloyed with Sc and Zr, and the kinetics of A13（SCl-xZrx） precipitates in the A1-Zn-Mg alloy during homogenization were investigated. Both alloys under as-cast condition with supersaturated, non-equilibrium T（Mg32（A1, Zn）49） phase and impurities phase were displayed. When the homogenization temperatures are below 350 ~C, Zn and Mg atoms precipitate from matrix; however, when the temperatures are above 400 ~C, T phase dissolves into matrix, enhancing solid-solution strengthening. Kinetics of A13（Scl.xZrx） precipitates was studied based on Jmat Pro software calculation and the difference values between the hardness of the two alloys in each homogenization condition. The calculations predict that the Sc and Zr solubilities in ct-A1 decline with the presence of Mg and Zn. Investigation of the difference values reveals that when the temperature is between 300 ~C and 350 ~C, the nucleation rate of A13（Sc1-xZrx） precipitates is the highest and the strengthening effect from A13（SCl_xZrx） precipitates is the best. After homogenization at 470℃ for 12 h, non-equilibrium T phase disappears, while impurity phase remains. The mean diameter of A13（Scl_xZrx） precipitates is around 18 urn. Ideas about better fulfilling the potentials of Sc and Zr were proposed at last.
基金Project(51374155)supported by the National Natural Science Foundation of ChinaProject(2014BCB034)supported by the Hubei Province Key Technology R&D Program,ChinaProject(2014CFB796)supported by the Natural Science Foundation of Hubei Province of China
文摘In order to expand the application of the basic magnesium carbonate in the field of flame retardant,the plate-like basic magnesium carbonate(Mg5(CO3)4(OH)2.4H2O)was prepared successfully by template-mediated/homogeneous precipitation method,using magnesium chloride hexahydrate(MgCl2.6H2O)and urea(CO(NH2)2)as reaction materials.Phase and morphology of the product were characterized by X-ray diffraction(XRD),scanning electron microscope(SEM)and atomic force microscope(AFM),respectively.The results showed that well-crystallized plate-like Mg5(CO3)4(OH)2.4H2O can be prepared at the water bath temperature of 100°C,water bath time of 24 h,the aging time of 5 h after adding organic template agent.The investigation on organic template mediated mechanism shows that the template affects the crystal morphology by changing surface energy of different crystal plane.Through a preliminary study on the growth mechanism of the product,it is found that the generation of the plate-like Mg5(CO3)4(OH)2.4H2O could be explained by two-dimensional nucleation/step growth mechanism.
基金Supported by National Natural Science Foundation of China(50707012),State Key Laboratory of Electrical Insulation and Power Equipment(EIPE11205),"Qing Lan Project"in Jiangsu Province of China.
文摘The homogeneous dielectric barrier discharge(DBD) in atmospheric air is most favorable for polymer surface modification due to the low cost of operation and the ability of ambient on-line continuous uniform processing.In this paper,polypropylene(PP) films are treated using a homogeneous DBD plasma in atmospheric air.The surface properties of PP films are studied using contact angle and surface energy measurement,scanning electron microscopy (SEM) and Fourier transformed infrared spectroscopy(FTIR),and the aging effect after treatment when the treated materials are exposed to open air is also studied,with the modification mechanism being discussed.It is demonstrated that non-thermal plasmas generated by homogeneous DBD in atmospheric air is an effective way to enhance the surface properties of PP films.After the plasma treatment,the surface of PP film is etched,and oxygen-containing polar groups are introduced into the surface.These two processes can induce a remarkable decrease in water contact angle and a remarkable increase in surface energy,and the surface properties of PP films are improved accordingly.
基金Supported by Overall Innovation Plan Projects of Science and Technology of Shaanxi Province in China(2015KTZDSF02-01-02)
文摘OBJECTIVE To determine the characterization,anti-tumor efficacy and pharmacokinetics of bufalin-loaded PEGylated liposomes compared with bufalin entity.METHODS Bufalin-loaded PEGylated liposomes and bufalin-loaded liposomes were prepared reproducibly with homogeneous particle size by the combination of thin film evaporation method and high pressure homogenization method.The particle size and zeta potential of the liposomes were determined by dynamic light scattering technique.The direct imaging of morphology of liposomes was charactered by transmission electron microscope.The content of bufalin in liposomes was analysed by HPLC method.The entrapment efficiency and the particle size was applied to assess the stability profile,after storage at 4℃ on day 0,7,15,30 and 90.The in-vitro release behaviours of bufalin from liposomes were conducted using dialysis bag technique at 37℃.In-vitro cytotoxicity studies were carried out using MTT[3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide]assay on several kinds of tumor cel lines including SW620,PC-3,MDA-MB-231,A549,U251,U87 and HepG2.In-vivo pharmacokinetic study of bufalin liposomes was evaluated by HPLC method.RESULTS Their mean particle sizes were 127.6 nm and 155.0 nm,mean zeta potentials were 2.24 m V and-18.5 m V,entrapment efficiencies were 76.31%and 78.40%,respectively.In-vitro release profile revealed that the release of bufalin in bufalin-loaded PEGylated liposomes was slower than that of bufalin-loaded liposomes.The cytotoxicity of blank liposomes has been found within acceptable range,whereas bufalin-loaded PEGylated liposomes showed enhanced cytotoxicity to U251 cells compared with bufalin entity.In-vivo pharmacokinetics indicated that bufalinloaded PEGylated liposomes could extend eliminate half-life time of bufalin in plasma in rats.CONCLUSION The results suggested that bufalin-loaded PEGylated liposomes improved the solubility and increased the drug concentration in plasma.
基金Project(51801082) supported by National Natural Science Foundation of ChinaProjects(GY2021003, GY2021020)supported by the Key Research and Development Program of Zhenjiang City,China+1 种基金Project(KYCX21_3453) supported by Graduate Research and Innovation Projects in Jiangsu Province,ChinaProject(202110289002Z) supported by Undergraduate Innovation and Entrepreneurship Training Program of Jiangsu Province,China。
文摘In order to improve the through-thickness homogeneity and properties of aviation aluminum alloy thick plate.The effect of heating-cooling retrogression and re-ageing on the performance of Al-8Zn-2Mg-2Cu alloy thick plate was investigated by hardness tests, electrical conductivity tests and transmission electron microscopy(TEM) observation.Results revealed that, during retrogression heating, the fine pre-precipitates in surface layer dissolve more and the undissolved η′ or η phases are more coarsened than that of center layer. During slow cooling after retrogression,precipitates continue coarsening but with a lower rate and the secondary precipitation occurs in both layers. Finer precipitates resulting from the secondary precipitation are more in surface. However, the coarsening and secondary precipitation behaviors are restrained in both layers under quick cooling condition. The electrical conductivity and through-thickness homogeneity of precipitates increases while the hardness decreases with cooling rate decreasing. After the optimized non-isothermal retrogression and re-ageing(NRRA) including air-cooling retrogression, the throughthickness homogeneity which is evaluated by integrated retrogression effects has been improved to 94%. The tensile strength, fracture toughness and exfoliation corrosion grade of Al-8Zn-2Mg-2Cu alloy plate is 619 MPa, 24.7 MPa·m^(1/2)and EB, respectively, which indicates that the non-isothermal retrogression and re-aging(NRRA) could improve the mechanical properties and corrosion resistance with higher through-thickness homogeneity.
文摘The present article deals with thermally stratified stagnation-point flow saturated in porous medium on surface of variable thickness along with more convincing and reliable surface condition termed as melting heat transfer.Homogeneous–heterogeneous reaction and radiative effects have been further taken into account to reconnoiterproperties of heat transfer.Melting heat transfer and phenomenon of homogeneous–heterogeneous reaction have engrossed widespread utilization in purification of metals,welding process,electroslag melting,biochemical systems,catalysis and several industrial developments.Suitable transformations are utilized to attain a scheme of ordinary differential equations possessing exceedingly nonlinear nature.Homotopic process is employed to develop convergent solutions of the resulting problem.Discussion regarding velocity,thermal field and concentration distribution for several involved parameters is pivotal part.Graphical behaviors of skin friction coefficient and Nusselt number are also portrayed.Concentration of the reactants is found to depreciate as a result of strength of both heterogeneous and homogeneous reaction parameters.With existence of melting phenomenon,declining attitude of fluid temperature is observed for higher radiation parameter.
