Accurately forecasting the triple point(TP)path is essential for analyzing blast loads and assessing the destructive effectiveness of the height of burst explosion.Empirical models that describe the TP path under norm...Accurately forecasting the triple point(TP)path is essential for analyzing blast loads and assessing the destructive effectiveness of the height of burst explosion.Empirical models that describe the TP path under normal temperature and pressure environments are commonly employed;however,in certain configurations,such as at high-altitudes(HAs),the environment may involve low temperature and pressure conditions.The present study develops a theoretical prediction model for the TP path under reduced pressure and temperature conditions,utilizing the image bursts method,reflected polar analysis,and dimensional analysis.The model's accuracy is evaluated through numerical simulations and experimental data.Results indicate that the prediction model effectively evaluates the TP path under diminished temperature and pressure conditions,with most predictions falling within a±15%deviation.It was found that the TP height increases with altitude.As the altitude rises from 0 m to 10,000 m,the average TP height increases by 61.7%,87.9%,109.0%,and 134.3%for the scaled height of burst of 1.5 m,2.0 m,2.5 m,and 3.0 m,respectively.Moreover,the variation in TP height under HA environments closely mirrors that observed under corresponding reduced pressure conditions.In HA environments,only the effect of low-pressure conditions on the TP path needs to be considered,as the environmental lowtemperature has a minimal effect.展开更多
Sudden earthquakes pose a threat to the running safety of trains on high-speed railway bridges,and the stiffness of piers is one of the factors affecting the dynamic response of train-track-bridge system.In this paper...Sudden earthquakes pose a threat to the running safety of trains on high-speed railway bridges,and the stiffness of piers is one of the factors affecting the dynamic response of train-track-bridge system.In this paper,a experiment of a train running on a high-speed railway bridge is performed based on a dynamic experiment system,and the corresponding numerical model is established.The reliability of the numerical model is verified by experiments.Then,the experiment and numerical data are analyzed to reveal the pier height effects on the running safety of trains on bridges.The results show that when the pier height changes,the frequency of the bridge below the 30 m pier height changes greater;the increase of pier height causes the transverse fundamental frequency of the bridge close to that of the train,and the shaking angle and lateral displacement of the train are the largest for bridge with 50 m pier,which increases the risk of derailment;with the pier height increases from 8 m to 50 m,the derailment coefficient obtained by numerical simulations increases by 75% on average,and the spectral intensity obtained by experiments increases by 120% on average,two indicators exhibit logarithmic variation.展开更多
Residual coal pillars play an important role in mining the adjacent coal seam safely,managing the gobs and maintaining the stability of abandoned coal mines.The height to diameter ratio(H/D)affects the stability of re...Residual coal pillars play an important role in mining the adjacent coal seam safely,managing the gobs and maintaining the stability of abandoned coal mines.The height to diameter ratio(H/D)affects the stability of residual coal pillars.In this study,uniaxial compressive tests of coal specimens with five H/D(2.0,1.5,1.0,0.8 and 0.6)were performed,and the stress,strain and acoustic emission(AE)were monitored.Results show that the uniaxial compressive strength(UCS)and peak strain increase with H/D decreasing.An empirical equation is proposed to calculate the UCS based on the H/D.The AE activities during coal failure process can be separated into four periods.The span of quiet period and rapid decline period shorten with H/D decreasing.The smaller the H/D is,the more complicated the failure characteristics of coal will be.The failure form of coal with H/D of 2.0,1.5,and 1.0 is primarily shear failure,while splitting failure along the axial direction is the mainly mode when H/D is 0.8 or 0.6.The initiation,expansion,aggregation and connection of micro-cracks can be reflected by the real-time spatial evolution of AE event points.展开更多
It is an attractive method to combine GPS observations with the information from other surveying system to improve the ambiguity resolution. This research is conducted to investigate how to obtain the prior height inf...It is an attractive method to combine GPS observations with the information from other surveying system to improve the ambiguity resolution. This research is conducted to investigate how to obtain the prior height information in bathymetric surveying by GPS positioning and how to use the prior height information and to obtain a robust result. The authors deal with the collection and the description of the prior height and the method using height validation to improve the ambiguity resolution. The principle of the method, the relationships between the height threshold and the ambiguity search space are presented. A method to determine the threshold for the height validation is suggested. The field tests are carried out to show the feasibility of the proposed methods.展开更多
According to the characteristic of global positioning system（GPS） reflection signals,a GPS delay mapping receiver system scheme is put forward,which not only satisfies the unmanned aerial vehicle（UAV） guidance loc...According to the characteristic of global positioning system（GPS） reflection signals,a GPS delay mapping receiver system scheme is put forward,which not only satisfies the unmanned aerial vehicle（UAV） guidance localization but also realizes height measurement.A code delay algorithm is put forward,which processes the direct and land reflected signal and outputs the navigation data and specular point.The GPS terrain reflected echo signal mathematical equation is inferred.The reflecting signal area,when the GPS signal passes the land,is analyzed.The height survey model reflected land surface characteristic is established.A simulation system which carries guidance localization of the UAV and the height measuring control through the GPS direct signal and the land reflected signal is designed,taken the GPS satellite as the illumination source,the receiver is put on the UAV.Then the UAV guidance signal,the GPS reflection signal and receiver＇s parallel processing are realized.The parallel processing reduces UAV＇s payload and raises system＇s operating efficiency.The simulation results confirms the validity of the model and also provides the basis for the UAV＇s optimization design.展开更多
The mining space of large mining height coal face is large,the range of movement and caving of rock strata is large and the stability of supports at coal face is low and damage rate of supports is high,which significa...The mining space of large mining height coal face is large,the range of movement and caving of rock strata is large and the stability of supports at coal face is low and damage rate of supports is high,which significantly affects the safe and efficient production of coal mines.By similar simulation experiment and theoretical analysis,the mode of fractured roofing structure of large mining height coal face and the method of determination of reasonable support resistance of the support was evaluated.Analysis shows that the structural mode of "combined cantilever beam – non-hinged roofing – hinged roofing" of the large mining height coal face appears at the roofing of large mining height coal face.The supporting factor of caved gangue at the gob is introduced,the calculating equations of the fractured step distance of roofing were derived and conventional calculating method of caved height of roofing was corrected and the method of determination of the length and height of each structural area of the roofing was provided.With reference to the excavating conditions at Jinhuagong coal mine in Datong minefield,the dimensions of structural areas of the roofing of the coal face were determined and analyzed,and reasonable support resistance of the height coal face was acquired.By selecting Model ZZ13000/28/60 support and with procedures of advanced pre-cracking blasting,the safe production of large mining height coal face was assured.展开更多
For improving global stability of mining environment reconstructing structure,the stress field evolution law of the structure with the filling height change of low-grade backfill was studied by ADINA finite element an...For improving global stability of mining environment reconstructing structure,the stress field evolution law of the structure with the filling height change of low-grade backfill was studied by ADINA finite element analysis code.Three kinds of filling schemes were designed and calculated,in which the filling heights were 2,4,and 7 m,separately.The results show that there are some rules in the stress field with the increase of the filling height as follows:(1) the maximum value of tension stress of the roof decreases gradually,and stress conditions are improved gradually;(2) the tension stress status in the vertical pillar is transformed into the compressive stress status,and the carrying capacity is improved gradually;however,when the filling height is beyond 2.8 m,the carrying capacity of the vertical pillar grows very slowly,so,there is little significance to continue to fill the low-grade backfill;(3) the bottom pillar suffers the squeezing action from the vertical pillars at first and then the gravity action of the low-grade backfill,and the maximum value of tension stress of the bottom pillar firstly increases and then decreases.Considering the economic factor,security and other factors,the low-grade backfill has the most reasonable height(2.8 m) in the scope of all filling height.展开更多
Background:Plant height(PH)and fruit branch number(FBN)are important traits for improving yield and mechanical harvesting of cotton.In order to identify genes of PH and FBN in cotton germplasms to develop superior cul...Background:Plant height(PH)and fruit branch number(FBN)are important traits for improving yield and mechanical harvesting of cotton.In order to identify genes of PH and FBN in cotton germplasms to develop superior cultivars,quantitative trait loci(QTLs)for these traits were detected based on the phenotypic evaluation data in nine environments across four locations and 4 years and a previously reported genetic linkage map of an recombinant inbred line(RIL)population of upland cotton.Results:In total,53 QTLs of PH and FBN,were identified on 21 chromosomes of the cotton genome except chromosomes c02,c09-c11,and c22.For PH,27 QTLs explaining 3.81%–8.54%proportions of phenotypic variance were identified on 18 chromosomes except c02,c08-c12,c15,and c22.For FBN,26 QTLs explaining 3.23%–11.00%proportions of phenotypic variance were identified on 16 chromosomes except c02-c03,c06,c09-c11,c17,c22-c23,and c25.Eight QTLs were simultaneously identified in at least two environments.Three QTL clusters containing seven QTLs were identified on three chromosomes(c01,c18 and c21).Eleven QTLs were the same as previously reported ones,while the rest were newly identified.Conclusions:The QTLs and QTL clusters identified in the current study will be helpful to further understand the genetic mechanism of PH and FBN development of cotton and will enhance the development of excellent cultivars for mechanical managements in cotton production.展开更多
The mowing height and mowing frequency are the key factors that affect the turf quality and turfgrass growing ability. The purpose of this study was to reveal the alternative effcient interaction between mowing height...The mowing height and mowing frequency are the key factors that affect the turf quality and turfgrass growing ability. The purpose of this study was to reveal the alternative effcient interaction between mowing height and mowing frequency in Kentucky bluegrass turf management. The Kentucky bluegrass cultivar ＇Kenblue＇ （Poa pratensis L.） was used to evaluate the interactions of mowing heights （H1, H4 and H7） and mowing frequencies （F2, F5 and F8） on the performance of turfgrass and turf physiological responses under the feld condition. The results showed that the treatment of H7×F8 had perfect infuence on the turf texture, root elongation, and also enhanced soluble sugar and free proline content in plants. While, the turf quality, color, uniformity and the increasing tiller numbers were performed more superior in the treatment of H4×F5 than other treatments. In all the interacting treatments, the relation between leaf green index and number of shoots （dm2） was positively correlated, thus, it could be speculated that the proper mowing height with frequency had a strong impact on the increasing of turfgrass tillers. On the whole, the interaction of H4×F5 on turf quality was the most excellent treatment in this experiment.展开更多
In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach...In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach has been the use of a simplified Random Volume Over Ground(RVOG) model that locally estimates forest height. The model takes TanDEM-X interferometric coherence amplitude as an input and uses an external Digital Surface Model(DSM) to account for local slope variations due to terrain topography in order to achieve accurate forest height estimation. The selection of DSM for use as a local slope reference is essential, as an inaccurate DSM will result in less accurate terrain-correction and forest height estimation. In this paper, we assessed TanDEM-X height estimates associated with scale variations in different DSMs used in the model over a remote sensing supersite in Petawawa, Canada. The DSMs used for assessments and comparisons included ASTER GDEM, ALOS GDSM, airborne DRAPE DSM, Canadian DSM and TanDEM-X DSM. Airborne Laser Scanning(ALS) data were used as reference for terrain slope and forest height comparisons. The results showed that, with the exception of the ASTER GDEM, all DSMs were sufficiently accurate for the simplified RVOG model to provide a satisfactory estimate of stand-level forest height. When compared to the ALS 95th height percentile, the modeled forest heights had R2 values greater than 80% and Root-Mean-Square Errors(RMSE)less than 2 m. For a close similarity in slope estimation with the ALS reference, coverage across Canada and open data access, the 0.75 arc-second(20 m) resolution Canadian DSM was selected as a preferred choice for the simplified RVOG model to provide TanDEM-X height estimation in Canada.展开更多
Some factors influencing the cargo projectile's ejection height in different conditions were analyzed by using harmonic curve diagram and cluster method.The test results of the ejection height for a certain cargo ...Some factors influencing the cargo projectile's ejection height in different conditions were analyzed by using harmonic curve diagram and cluster method.The test results of the ejection height for a certain cargo projectile show that the wind speed and direction are the main influence factors.For given meteorological conditions,the applied environmental stress becomes the main cause,while the launching angle does not influence the ejection height.展开更多
In order to study the effects of ventilation modes and outlet height on the airflow field of a nursery piggery,computational fluid dynamics (CFD) technology was used to simulate the wind speed and temperature of an ex...In order to study the effects of ventilation modes and outlet height on the airflow field of a nursery piggery,computational fluid dynamics (CFD) technology was used to simulate the wind speed and temperature of an experimental pig house in the cold northern region.This study was conducted with simulation and a comparative analysis of transverse ventilation,longitudinal ventilation and roof air intake modes.Furthermore,the effects of the air outlet height of 0.7,0.6 and 0.5 m with the roof air inlet mode on the environment in the pig house were studied.Field experiments verified the model of roof air intake model.The results showed inadequate ventilation in both the vertical and horizontal ventilation.However,the airfield gradients were less variable and more balanced when using the rooftop air intake mode.The variation of outlet height significantly affected nursery pig houses’ airflow velocity and temperature.Roof air inlet mode with an outlet height of 0.7 m was better than the other two.The normalized mean square error (NMSE) of air velocity and temperature was less than 0.01,and the simulation analysis could genuinely reflect the distribution of the airflow field in the nursery.展开更多
To analyze the influence of movement in shallow-buried working faces with large mining heights on mine pressure manifestation, the key stratum at a working face was categorised using the 1313 top-coal caving face with...To analyze the influence of movement in shallow-buried working faces with large mining heights on mine pressure manifestation, the key stratum at a working face was categorised using the 1313 top-coal caving face with super great mining height under cover as a case study. The research combined theoretical analysis, field measurement, and numerical simulation to analyze the influencing mechanism of key stratum. Moreover, the research results were verified by numerical simulation and indicate that the sub-key stratum is prone to be broken to form a "cantilever beam" structure rather than a stable hinged structure during the excavation of working faces with super great mining heights. When the "cantilever beam" structure is unstable, a low pressure will occur on the working face, and the overlying strata will subside simultaneously with the sub-key stratum to induce the breakage of the primary key stratum: the breakage will further trigger the periodic breakage of sub-key stratum, causing a greater load on the working face. Finally, steps, and strength of weighting in the working face vary to be great or small alternatively. This is the main reason explaining why the 1313 working face shows strong mine pressure manifestation. The results provide theoretical and practical experience for forecasting and controlling mine pressure manifestation.展开更多
This paper deals with the issue of preparation of the aiming angles with the use of tabular firing tables and needed determination of the ballistic elements μ_B(ballistic wind w_B,w_(xB),w_(ZB),ballistic(virtual) tem...This paper deals with the issue of preparation of the aiming angles with the use of tabular firing tables and needed determination of the ballistic elements μ_B(ballistic wind w_B,w_(xB),w_(ZB),ballistic(virtual) temperature τ_B.ballistic density p_B) from the standardized met messages.The weighting factors are used for the calculation of ballistic elements μ_B that are incorporated into the trajectory calculations characteristics of weapon and ammunition.Two different methodologies practically used in the praxis are analysed and compared.For the comparison of the two methodologies the reference height of trajectory determined from the weighting factor functions is employed.On the basis of the analyses conducted,the potential for further increase in accuracy of these aiming angles preparation methods is pointed out.展开更多
Submunitions should exhibit optimum terminal performance at target end when released from certain pre-determined height. Selection of an optimum height of release of the submunitions depends on the terminal parameters...Submunitions should exhibit optimum terminal performance at target end when released from certain pre-determined height. Selection of an optimum height of release of the submunitions depends on the terminal parameters like forward throw, remaining velocity, impact angle and flight time. In this paper,the effects of initial firing conditions and height of release on terminal performance of submunitions discussed in detail. For different height of release, the relation between range and forward throw is also established & validated for a number of firing altitude and rocket configurations.展开更多
Projectile trajectories calculated under non-standard conditions are considered to be perturbed. The tools utilized for the analysis of perturbed trajectories are weighting factor functions(WFFs) which are a special k...Projectile trajectories calculated under non-standard conditions are considered to be perturbed. The tools utilized for the analysis of perturbed trajectories are weighting factor functions(WFFs) which are a special kind of sensitivity functions. WFFs are used for calculation of meteo ballistic elements mB(ballistic wind wB, virtual temperature tB, pressure pB, density rB, speed of sound a) as well. An effect of weapon system parameters can be incorporated into calculations through the reference height of trajectory-RHT.RHT are also calculated from WFFs. Methods based on RHT are far more effective than traditional methods that use weighting factors q.We have found that the existing theory of RHT has several shortcomings due to we created an improved theory of generalized RHT which represent a special sensitivity parameters of dynamical systems. Using this theory will improve methods for designing firing tables, fire control systems algorithms, and meteo message generation algorithms.展开更多
基金funding from Anhui Engineering Laboratory of Explosive Materials and Technology Foundation(No.AHBP2022B-04)Natural Science Research Project of Anhui Educational Committee(No.2023AH051221)+1 种基金Anhui Provincial Natural Science Foundation(No.2208085QA26)Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology for the project related to this work.
文摘Accurately forecasting the triple point(TP)path is essential for analyzing blast loads and assessing the destructive effectiveness of the height of burst explosion.Empirical models that describe the TP path under normal temperature and pressure environments are commonly employed;however,in certain configurations,such as at high-altitudes(HAs),the environment may involve low temperature and pressure conditions.The present study develops a theoretical prediction model for the TP path under reduced pressure and temperature conditions,utilizing the image bursts method,reflected polar analysis,and dimensional analysis.The model's accuracy is evaluated through numerical simulations and experimental data.Results indicate that the prediction model effectively evaluates the TP path under diminished temperature and pressure conditions,with most predictions falling within a±15%deviation.It was found that the TP height increases with altitude.As the altitude rises from 0 m to 10,000 m,the average TP height increases by 61.7%,87.9%,109.0%,and 134.3%for the scaled height of burst of 1.5 m,2.0 m,2.5 m,and 3.0 m,respectively.Moreover,the variation in TP height under HA environments closely mirrors that observed under corresponding reduced pressure conditions.In HA environments,only the effect of low-pressure conditions on the TP path needs to be considered,as the environmental lowtemperature has a minimal effect.
基金Projects(52022113,52278546)supported by the National Natural Science Foundation of ChinaProject(2020EEEVL0403)supported by the China Earthquake Administration。
文摘Sudden earthquakes pose a threat to the running safety of trains on high-speed railway bridges,and the stiffness of piers is one of the factors affecting the dynamic response of train-track-bridge system.In this paper,a experiment of a train running on a high-speed railway bridge is performed based on a dynamic experiment system,and the corresponding numerical model is established.The reliability of the numerical model is verified by experiments.Then,the experiment and numerical data are analyzed to reveal the pier height effects on the running safety of trains on bridges.The results show that when the pier height changes,the frequency of the bridge below the 30 m pier height changes greater;the increase of pier height causes the transverse fundamental frequency of the bridge close to that of the train,and the shaking angle and lateral displacement of the train are the largest for bridge with 50 m pier,which increases the risk of derailment;with the pier height increases from 8 m to 50 m,the derailment coefficient obtained by numerical simulations increases by 75% on average,and the spectral intensity obtained by experiments increases by 120% on average,two indicators exhibit logarithmic variation.
基金Projects(51974192,52004172)supported by the National Natural Science Foundation of ChinaProject(51925402)supported by the Distinguished Youth Funds of National Natural Science Foundation of ChinaProject(U1710258)supported by the Joint Funds of National Natural Science Foundation of China and Shanxi Province,China。
文摘Residual coal pillars play an important role in mining the adjacent coal seam safely,managing the gobs and maintaining the stability of abandoned coal mines.The height to diameter ratio(H/D)affects the stability of residual coal pillars.In this study,uniaxial compressive tests of coal specimens with five H/D(2.0,1.5,1.0,0.8 and 0.6)were performed,and the stress,strain and acoustic emission(AE)were monitored.Results show that the uniaxial compressive strength(UCS)and peak strain increase with H/D decreasing.An empirical equation is proposed to calculate the UCS based on the H/D.The AE activities during coal failure process can be separated into four periods.The span of quiet period and rapid decline period shorten with H/D decreasing.The smaller the H/D is,the more complicated the failure characteristics of coal will be.The failure form of coal with H/D of 2.0,1.5,and 1.0 is primarily shear failure,while splitting failure along the axial direction is the mainly mode when H/D is 0.8 or 0.6.The initiation,expansion,aggregation and connection of micro-cracks can be reflected by the real-time spatial evolution of AE event points.
文摘It is an attractive method to combine GPS observations with the information from other surveying system to improve the ambiguity resolution. This research is conducted to investigate how to obtain the prior height information in bathymetric surveying by GPS positioning and how to use the prior height information and to obtain a robust result. The authors deal with the collection and the description of the prior height and the method using height validation to improve the ambiguity resolution. The principle of the method, the relationships between the height threshold and the ambiguity search space are presented. A method to determine the threshold for the height validation is suggested. The field tests are carried out to show the feasibility of the proposed methods.
基金supported by the National High Technology Researchand Development Program of China(863 Program)(2008AA12A216)
文摘According to the characteristic of global positioning system（GPS） reflection signals,a GPS delay mapping receiver system scheme is put forward,which not only satisfies the unmanned aerial vehicle（UAV） guidance localization but also realizes height measurement.A code delay algorithm is put forward,which processes the direct and land reflected signal and outputs the navigation data and specular point.The GPS terrain reflected echo signal mathematical equation is inferred.The reflecting signal area,when the GPS signal passes the land,is analyzed.The height survey model reflected land surface characteristic is established.A simulation system which carries guidance localization of the UAV and the height measuring control through the GPS direct signal and the land reflected signal is designed,taken the GPS satellite as the illumination source,the receiver is put on the UAV.Then the UAV guidance signal,the GPS reflection signal and receiver＇s parallel processing are realized.The parallel processing reduces UAV＇s payload and raises system＇s operating efficiency.The simulation results confirms the validity of the model and also provides the basis for the UAV＇s optimization design.
基金Project(51174192)supported by the National Natural Science Foundation of ChinaProject(BRA2010024)supported by "333" Training Foundation of Jiangsu Province,China+2 种基金Projects(2011QNB03,2014ZDPY21,2014QNB30)supported by the Fundamental Research Funds for the Central Universities,ChinaProject Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,ChinaProject(2015M581896)supported by China Postdoctoral Science Foundation
文摘The mining space of large mining height coal face is large,the range of movement and caving of rock strata is large and the stability of supports at coal face is low and damage rate of supports is high,which significantly affects the safe and efficient production of coal mines.By similar simulation experiment and theoretical analysis,the mode of fractured roofing structure of large mining height coal face and the method of determination of reasonable support resistance of the support was evaluated.Analysis shows that the structural mode of "combined cantilever beam – non-hinged roofing – hinged roofing" of the large mining height coal face appears at the roofing of large mining height coal face.The supporting factor of caved gangue at the gob is introduced,the calculating equations of the fractured step distance of roofing were derived and conventional calculating method of caved height of roofing was corrected and the method of determination of the length and height of each structural area of the roofing was provided.With reference to the excavating conditions at Jinhuagong coal mine in Datong minefield,the dimensions of structural areas of the roofing of the coal face were determined and analyzed,and reasonable support resistance of the height coal face was acquired.By selecting Model ZZ13000/28/60 support and with procedures of advanced pre-cracking blasting,the safe production of large mining height coal face was assured.
基金Project(200911MS01) supported by the Scientific Research Fund of Guangxi Provincial Education Department, China Project (XBZ100126) supported by the Scientific Research Foundation of Guangxi University, China Project(2009B005) supported by the Teaching Reform Foundation in the New Century Higher Education of Guangxi Province,China
文摘For improving global stability of mining environment reconstructing structure,the stress field evolution law of the structure with the filling height change of low-grade backfill was studied by ADINA finite element analysis code.Three kinds of filling schemes were designed and calculated,in which the filling heights were 2,4,and 7 m,separately.The results show that there are some rules in the stress field with the increase of the filling height as follows:(1) the maximum value of tension stress of the roof decreases gradually,and stress conditions are improved gradually;(2) the tension stress status in the vertical pillar is transformed into the compressive stress status,and the carrying capacity is improved gradually;however,when the filling height is beyond 2.8 m,the carrying capacity of the vertical pillar grows very slowly,so,there is little significance to continue to fill the low-grade backfill;(3) the bottom pillar suffers the squeezing action from the vertical pillars at first and then the gravity action of the low-grade backfill,and the maximum value of tension stress of the bottom pillar firstly increases and then decreases.Considering the economic factor,security and other factors,the low-grade backfill has the most reasonable height(2.8 m) in the scope of all filling height.
基金funded by the National Key R&D Program of China(2017YFD01016002016YFD0100505)+1 种基金the Fundamental Research Funds for Central Research Institutes(Y2017JC48)the Natural Science Foundation of China(31371668,31471538)。
文摘Background:Plant height(PH)and fruit branch number(FBN)are important traits for improving yield and mechanical harvesting of cotton.In order to identify genes of PH and FBN in cotton germplasms to develop superior cultivars,quantitative trait loci(QTLs)for these traits were detected based on the phenotypic evaluation data in nine environments across four locations and 4 years and a previously reported genetic linkage map of an recombinant inbred line(RIL)population of upland cotton.Results:In total,53 QTLs of PH and FBN,were identified on 21 chromosomes of the cotton genome except chromosomes c02,c09-c11,and c22.For PH,27 QTLs explaining 3.81%–8.54%proportions of phenotypic variance were identified on 18 chromosomes except c02,c08-c12,c15,and c22.For FBN,26 QTLs explaining 3.23%–11.00%proportions of phenotypic variance were identified on 16 chromosomes except c02-c03,c06,c09-c11,c17,c22-c23,and c25.Eight QTLs were simultaneously identified in at least two environments.Three QTL clusters containing seven QTLs were identified on three chromosomes(c01,c18 and c21).Eleven QTLs were the same as previously reported ones,while the rest were newly identified.Conclusions:The QTLs and QTL clusters identified in the current study will be helpful to further understand the genetic mechanism of PH and FBN development of cotton and will enhance the development of excellent cultivars for mechanical managements in cotton production.
基金Supported by the National Natural Science Foundation of China(31772354)the National Science Foundation of Heilongjiang Province of China(C200619)the State Key Lab of Plant Cell and Chromosome Engineering(PCCE-KF-2017-02)
文摘The mowing height and mowing frequency are the key factors that affect the turf quality and turfgrass growing ability. The purpose of this study was to reveal the alternative effcient interaction between mowing height and mowing frequency in Kentucky bluegrass turf management. The Kentucky bluegrass cultivar ＇Kenblue＇ （Poa pratensis L.） was used to evaluate the interactions of mowing heights （H1, H4 and H7） and mowing frequencies （F2, F5 and F8） on the performance of turfgrass and turf physiological responses under the feld condition. The results showed that the treatment of H7×F8 had perfect infuence on the turf texture, root elongation, and also enhanced soluble sugar and free proline content in plants. While, the turf quality, color, uniformity and the increasing tiller numbers were performed more superior in the treatment of H4×F5 than other treatments. In all the interacting treatments, the relation between leaf green index and number of shoots （dm2） was positively correlated, thus, it could be speculated that the proper mowing height with frequency had a strong impact on the increasing of turfgrass tillers. On the whole, the interaction of H4×F5 on turf quality was the most excellent treatment in this experiment.
基金This work was supported by Natural Resources Canada and the Canadian Space Agency under Multisource Biomass GRIP and by the German Aerospace Centre for provision of TanDEM-X data。
文摘In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach has been the use of a simplified Random Volume Over Ground(RVOG) model that locally estimates forest height. The model takes TanDEM-X interferometric coherence amplitude as an input and uses an external Digital Surface Model(DSM) to account for local slope variations due to terrain topography in order to achieve accurate forest height estimation. The selection of DSM for use as a local slope reference is essential, as an inaccurate DSM will result in less accurate terrain-correction and forest height estimation. In this paper, we assessed TanDEM-X height estimates associated with scale variations in different DSMs used in the model over a remote sensing supersite in Petawawa, Canada. The DSMs used for assessments and comparisons included ASTER GDEM, ALOS GDSM, airborne DRAPE DSM, Canadian DSM and TanDEM-X DSM. Airborne Laser Scanning(ALS) data were used as reference for terrain slope and forest height comparisons. The results showed that, with the exception of the ASTER GDEM, all DSMs were sufficiently accurate for the simplified RVOG model to provide a satisfactory estimate of stand-level forest height. When compared to the ALS 95th height percentile, the modeled forest heights had R2 values greater than 80% and Root-Mean-Square Errors(RMSE)less than 2 m. For a close similarity in slope estimation with the ALS reference, coverage across Canada and open data access, the 0.75 arc-second(20 m) resolution Canadian DSM was selected as a preferred choice for the simplified RVOG model to provide TanDEM-X height estimation in Canada.
文摘Some factors influencing the cargo projectile's ejection height in different conditions were analyzed by using harmonic curve diagram and cluster method.The test results of the ejection height for a certain cargo projectile show that the wind speed and direction are the main influence factors.For given meteorological conditions,the applied environmental stress becomes the main cause,while the launching angle does not influence the ejection height.
基金Supported by the National Natural Science Foundation of China(32072787)。
文摘In order to study the effects of ventilation modes and outlet height on the airflow field of a nursery piggery,computational fluid dynamics (CFD) technology was used to simulate the wind speed and temperature of an experimental pig house in the cold northern region.This study was conducted with simulation and a comparative analysis of transverse ventilation,longitudinal ventilation and roof air intake modes.Furthermore,the effects of the air outlet height of 0.7,0.6 and 0.5 m with the roof air inlet mode on the environment in the pig house were studied.Field experiments verified the model of roof air intake model.The results showed inadequate ventilation in both the vertical and horizontal ventilation.However,the airfield gradients were less variable and more balanced when using the rooftop air intake mode.The variation of outlet height significantly affected nursery pig houses’ airflow velocity and temperature.Roof air inlet mode with an outlet height of 0.7 m was better than the other two.The normalized mean square error (NMSE) of air velocity and temperature was less than 0.01,and the simulation analysis could genuinely reflect the distribution of the airflow field in the nursery.
基金Project(2015-29)supported by Jiangsu Distinguished Professor,ChinaProject(BRA2015311)supported by the Jiangsu Province Fourth 333 Engineering,China
文摘To analyze the influence of movement in shallow-buried working faces with large mining heights on mine pressure manifestation, the key stratum at a working face was categorised using the 1313 top-coal caving face with super great mining height under cover as a case study. The research combined theoretical analysis, field measurement, and numerical simulation to analyze the influencing mechanism of key stratum. Moreover, the research results were verified by numerical simulation and indicate that the sub-key stratum is prone to be broken to form a "cantilever beam" structure rather than a stable hinged structure during the excavation of working faces with super great mining heights. When the "cantilever beam" structure is unstable, a low pressure will occur on the working face, and the overlying strata will subside simultaneously with the sub-key stratum to induce the breakage of the primary key stratum: the breakage will further trigger the periodic breakage of sub-key stratum, causing a greater load on the working face. Finally, steps, and strength of weighting in the working face vary to be great or small alternatively. This is the main reason explaining why the 1313 working face shows strong mine pressure manifestation. The results provide theoretical and practical experience for forecasting and controlling mine pressure manifestation.
基金support of financial means from the industrial research project of the Ministry of the Interior of the Czech Republic-project code VG20122015076:"Two survey points range-finding system utilization for perimeter security(screen)"the Research project for the development of the Department of Weapons and Ammunition,Faculty of Military Technology, University of Defence,Brno,PRO K-201
文摘This paper deals with the issue of preparation of the aiming angles with the use of tabular firing tables and needed determination of the ballistic elements μ_B(ballistic wind w_B,w_(xB),w_(ZB),ballistic(virtual) temperature τ_B.ballistic density p_B) from the standardized met messages.The weighting factors are used for the calculation of ballistic elements μ_B that are incorporated into the trajectory calculations characteristics of weapon and ammunition.Two different methodologies practically used in the praxis are analysed and compared.For the comparison of the two methodologies the reference height of trajectory determined from the weighting factor functions is employed.On the basis of the analyses conducted,the potential for further increase in accuracy of these aiming angles preparation methods is pointed out.
文摘Submunitions should exhibit optimum terminal performance at target end when released from certain pre-determined height. Selection of an optimum height of release of the submunitions depends on the terminal parameters like forward throw, remaining velocity, impact angle and flight time. In this paper,the effects of initial firing conditions and height of release on terminal performance of submunitions discussed in detail. For different height of release, the relation between range and forward throw is also established & validated for a number of firing altitude and rocket configurations.
基金the Research Project for the Development of the Department of Weapons and Ammunition, Faculty of Military Technology, University of Defence, Brno, DZRO VYZBROJ
文摘Projectile trajectories calculated under non-standard conditions are considered to be perturbed. The tools utilized for the analysis of perturbed trajectories are weighting factor functions(WFFs) which are a special kind of sensitivity functions. WFFs are used for calculation of meteo ballistic elements mB(ballistic wind wB, virtual temperature tB, pressure pB, density rB, speed of sound a) as well. An effect of weapon system parameters can be incorporated into calculations through the reference height of trajectory-RHT.RHT are also calculated from WFFs. Methods based on RHT are far more effective than traditional methods that use weighting factors q.We have found that the existing theory of RHT has several shortcomings due to we created an improved theory of generalized RHT which represent a special sensitivity parameters of dynamical systems. Using this theory will improve methods for designing firing tables, fire control systems algorithms, and meteo message generation algorithms.
