Topmetal-M2 is a large-area pixel sensor chip fabricated using the GSMC 130 nm CMOS process in 2021.The pixel array of Topmetal-M2 consists of pixels of 400 rows×512 columns with a pixel pitch of 45μm×45μm...Topmetal-M2 is a large-area pixel sensor chip fabricated using the GSMC 130 nm CMOS process in 2021.The pixel array of Topmetal-M2 consists of pixels of 400 rows×512 columns with a pixel pitch of 45μm×45μm.The array is divided into 16 subarrays,with pixels of 400 rows×32 columns per subarray.Each pixel incorporates two charge sensors:a diode sensor and a Topmetal sensor.The in-pixel circuit primarily consists of a charge-sensitive amplifier for energy measurements,a discriminator with a peak-holding circuit,and a time-to-amplitude converter for time-of-arrival measurements.The pixel of Topmetal-M2 has a charge input range of~0-3 k e-,a voltage output range of~0-180 mV,and a charge-voltage conversion gain of~59.56μV∕e-.The average equivalent noise charge of Topmetal-M2,which includes the readout electronic system noise,is~43.45 e-.In the scanning mode,the time resolution of Topmetal-M2 is 1 LSB=1.25μs,and the precision is^()7.41μs.At an operating voltage of 1.5 V,Topmetal-M2 has a power consumption of~49 mW∕cm~2.In this article,we provide a comprehensive overview of the chip architecture,pixel working principles,and functional behavior of Topmetal-M2.Furthermore,we present the results of preliminary tests conducted on Topmetal-M2,namely,alpha-particle and soft X-ray tests.展开更多
POLAR-2 is a gamma-ray burst(GRB)polarimeter that is designed to study the polarization in GRB radiation emissions,aiming to improve our knowledge of related mechanisms.POLAR-2 is expected to utilize an on-board polar...POLAR-2 is a gamma-ray burst(GRB)polarimeter that is designed to study the polarization in GRB radiation emissions,aiming to improve our knowledge of related mechanisms.POLAR-2 is expected to utilize an on-board polarimeter that is sensitive to soft X-rays(2-10 keV),called low-energy polarization detector.We have developed a new soft X-ray polari-zation detector prototype based on gas microchannel plates(GMCPs)and pixel chips(Topmetal).The GMCPs have bulk resistance,which prevents charging-up effects and ensures gain stability during operation.The detector is composed of low outgassing materials and is gas-sealed using a laser welding technique,ensuring long-term stability.A modulation factor of 41.28%±0.64% is obtained for a 4.5 keV polarized X-ray beam.A residual modulation of 1.96%±0.58% at 5.9 keV is observed for the entire sensitive area.展开更多
The samples of InxGa（1-x）As/In（0.52）Al（0.48）As two-dimensional electron gas（2DEG）are grown by molecular beam epitaxy（MBE）.In the sample preparation process,the In content and spacer layer thickness are chang...The samples of InxGa（1-x）As/In（0.52）Al（0.48）As two-dimensional electron gas（2DEG）are grown by molecular beam epitaxy（MBE）.In the sample preparation process,the In content and spacer layer thickness are changed and two kinds of methods,i.e.,contrast body doping andδ-doping are used.The samples are analyzed by the Hall measurements at 300 Kand 77 K.The InxGa1-xAs/In0.52Al0.48As 2DEG channel structures with mobilities as high as 10289 cm^2/V·s（300 K）and42040 cm^2/V·s（77 K）are obtained,and the values of carrier concentration（Nc）are 3.465×10^12/cm^2 and 2.502×10^12/cm^2,respectively.The THz response rates of In P-based high electron mobility transistor（HEMT）structures with different gate lengths at 300 K and 77 K temperatures are calculated based on the shallow water wave instability theory.The results provide a reference for the research and preparation of In P-based HEMT THz detectors.展开更多
This study presents an electronics system for cosmic X-ray polarization detection(CXPD).The CXPD was designed as a high-sensitivity soft X-ray polarimeter with a measurement energy range of 2-10 keV carried by a CubeS...This study presents an electronics system for cosmic X-ray polarization detection(CXPD).The CXPD was designed as a high-sensitivity soft X-ray polarimeter with a measurement energy range of 2-10 keV carried by a CubeSat.A stable and functionally complete electronics system under power and space constraints is a key challenge.The complete CXPD electronics system(CXPDES)comprises hardware and firmware.CXPDES adopts a three-layer electronic board structure based on functionality and available space.Two gas pixel detectors(GPDs)were placed on the top layer board,and CXPDES provided the GPDs with voltages up to-4000 V.Each GPD signal was digitized,compressed,encoded,and stored before being transmitted to the ground.The CXPDES provided stable and high-speed communication based on a scheme that separated command and data transmission,and it supports the CXPDES in-orbit upgrade.In addition,environmental monitors,silicon photomultiplier(SiPM)triggers,power management,GPDs configuration,and mode switches were included in the overall operating logic of the CXPDES.The results obtained by testing the CXPDES showed that it satisfied all the requirements of CXPD.The CXPDES provides design experience and technological readiness for future large-area X-ray polarimetry missions.展开更多
Emulsifier-free poly（methyl methacrylate-styrene） [P（MMA-St）] nanospheres with an average particle size of 100 nm were synthesized in an isopropyl alcoholwater medium by a solvothermal method. Then, through radica...Emulsifier-free poly（methyl methacrylate-styrene） [P（MMA-St）] nanospheres with an average particle size of 100 nm were synthesized in an isopropyl alcoholwater medium by a solvothermal method. Then, through radical graft copolymerization of thermo-sensitive mono- mer N-isopropylacrylamide （NIPAm） and hydrophilic monomer acrylic acid （AA） onto the surface of P（MMA- St） nanospheres at 80 ℃, a series of thermo-sensitive polymer nanospheres, named SD-SEAL with different lower critical solution temperatures （LCST）, were prepared by adjusting the mole ratio of NIPAm to AA. The products were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis, particle size distribution, and specific surface area analysis. The temperature-sensitive behavior was studied by light transmittance tests, while the sealing performance was investigated by pressure transmission tests with Lungmachi Formation shales. The experimental results showed that the synthesized nanoparticles are sensitive to temperature and had apparent LCST values which increased with an increase in hydrophilic monomer AA. When the temperature was higher than its LCST value, SD- SEAL played a dual role of physical plugging and chemical inhibition, slowed down pressure transmission, and reduced shale permeability remarkably. The plugged layer of shale was changed to being hydrophobic, which greatly improved the shale stability展开更多
In this paper, the partial oxidation of methane to synthesis gas using lattice oxygen of La1- SrxMO3-λ (M=Fe, x ...In this paper, the partial oxidation of methane to synthesis gas using lattice oxygen of La1- SrxMO3-λ (M=Fe, x Mn) perovskite oxides instead of molecular oxygen was investigated. The redox circulation between 11% O2/Ar flow and 11% CH4/He flow at 900℃ shows that methane can be oxidized to CO and H2 with a selectivity of over 90.7% using the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite oxides in an appropriate reaction condition, while the lost lattice x oxygen can be supplemented by air re-oxidation. It is viable for the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite x oxides instead of molecular oxygen to react with methane to synthesis gas in the redox mode.展开更多
Based on the study of natural gas resource, low buried hill trap formation mechanism, high quality reservoir control factors and natural gas preservation conditions, the formation conditions and reservoir accumulation...Based on the study of natural gas resource, low buried hill trap formation mechanism, high quality reservoir control factors and natural gas preservation conditions, the formation conditions and reservoir accumulation characteristics of Bozhong 19-6 large condensate gas field were summarized. Large gas generation potential of multiple sets of thick humic-sapropelic source rocks in high maturity stage in Bozhong depression was the basis of large gas field formation. The multi-stage tectonic evolution since Indosinian period formed large-scale buried hill traps. The Tanlu fault activity formed multi-type reservoirs, and buried hill metamorphic rock of Archean and sand-conglomerate of Kongdian Formation were high-quality reservoirs. Thick overpressure lacustrine mudstone and weak neotectonic movement provided good preservation conditions. Bozhong 19-6 gas reservoir was a condensate gas reservoir with very high condensate oil content, and the gas origin was humic-sapropelic and kerogen-cracking gas, and the gas field had large gas thickness, high gas column characteristics and the accumulation process was first oil and then gas. The buried hill reservoir was a massive reservoir and the Kongdian reservoir was a stratified reservoir. The gas field had multi-channel hydrocarbon intense charge from overpressure source rocks, atmospheric-weak overpressure reservoir favorable for accumulation, thick overpressure mudstone caprock favorable for preservation, and natural gas ultra-late rapid accumulation model.展开更多
Deepwater oil and gas projects embody high risks from geology and engineering aspects, which exert substantial influence on project valuation. But the uncer- tainties may be converted to additional value to the projec...Deepwater oil and gas projects embody high risks from geology and engineering aspects, which exert substantial influence on project valuation. But the uncer- tainties may be converted to additional value to the projects in the case of flexible management. Given the flexibility of project management, this paper extends the classical real options model to a multi-factor model which contains oil price, geology, and engineering uncertainties. It then gives an application example of the new model to evaluate deepwater oil and gas projects with a numerical analytical method. Compared with other methods and models, this multi-factor real options model contains more project information. It reflects the potential value deriving not only from oil price variation but also from geology and engi- neering uncertainties, which provides more accurate and reliable valuation information for decision makers.展开更多
Based on analysis of newly collected 3D seismic and drilled well data,the geological structure and fault system of Baodao sag have been systematically examined to figure out characteristics of the transition fault ter...Based on analysis of newly collected 3D seismic and drilled well data,the geological structure and fault system of Baodao sag have been systematically examined to figure out characteristics of the transition fault terrace belt and its control on the formation of natural gas reservoirs.The research results show that the Baodao sag has the northern fault terrace belt,central depression belt and southern slope belt developed,among them,the northern fault terrace belt consists of multiple transition fault terrace belts such as Baodao B,A and C from west to east which control the source rocks,traps,reservoirs,oil and gas migration and hydrocarbon enrichment in the Baodao sag.The activity of the main fault of the transition belt in the sedimentary period of Yacheng Formation in the Early Oligocene controlled the hydrocarbon generation kitchen and hydrocarbon generation potential.From west to east,getting closer to the provenance,the transition belt increased in activity strength,thickness of source rock and scale of delta,and had multiple hydrocarbon generation depressions developed.The main fault had local compression under the background of tension and torsion,giving rise to composite traps under the background of large nose structure,and the Baodao A and Baodao C traps to the east are larger than Baodao B trap.Multiple fault terraces controlled the material source input from the uplift area to form large delta sand bodies,and the synthetic transition belt of the west and middle sections and the gentle slope of the east section of the F12 fault in the Baodao A transition belt controlled the input of two major material sources,giving rise to a number of delta lobes in the west and east branches.The large structural ridge formed under the control of the main fault close to the hydrocarbon generation center allows efficient migration and accumulation of oil and gas.The combination mode and active time of the main faults matched well with the natural gas charging period,resulting in the hydrocarbon gas enrichment.Baodao A transition belt is adjacent to Baodao 27,25 and 21 lows,where large braided river delta deposits supplied by Shenhu uplift provenance develop,and it is characterized by large structural ridges allowing high efficient hydrocarbon accumulation,parallel combination of main faults and early cessation of faulting activity,so it is a favorable area for hydrocarbon gas accumulation.Thick high-quality gas reservoirs have been revealed through drilling,leading to the discovery of the first large-scale gas field in Baodo 21-1 of Baodao sag.This discovery also confirms that the north transition zone of Songnan-Baodao sag has good reservoir forming conditions,and the transition fault terrace belt has great exploration potential eastward.展开更多
The Bohai Bay Basin is a typical oil-prone basin, in which natural gas geological reserves have a small proportion. In this basin, the gas source rock is largely medium-deep lake mudstone with oil-prone type Ⅱ2-Ⅱ1 k...The Bohai Bay Basin is a typical oil-prone basin, in which natural gas geological reserves have a small proportion. In this basin, the gas source rock is largely medium-deep lake mudstone with oil-prone type Ⅱ2-Ⅱ1 kerogens, and natural gas preservation conditions are poor due to active late tectonic movements. The formation conditions of large natural gas fields in the Bohai Bay Basin have been elusive. Based on the exploration results of Bohai Bay Basin and comparison with large gas fields in China and abroad, the formation conditions of conventional large-scale natural gas reservoirs in the Bohai Bay Basin were examined from accumulation dynamics, structure and sedimentation. The results show that the formation conditions of conventional large natural gas reservoirs in Bohai Bay Basin mainly include one core element and two key elements. The core factor is the strong sealing of Paleogene "quilt-like" overpressure mudstone. The two key factors include the rapid maturation and high-intensity gas generation of source rock in the late stage and large scale reservoir. On this basis, large-scale nature gas accumulation models in the Bohai Bay Basin have been worked out, including regional overpressure mudstone enriching model, local overpressure mudstone depleting model, sand-rich sedimentary subsag depleting model and late strongly-developed fault depleting model. It is found that Bozhong sag, northern Liaozhong sag and Banqiao sag have favorable conditions for the formation of large-scale natural gas reservoirs, and are worth exploring. The study results have important guidance for exploration of large scale natural gas reservoirs in the Bohai Bay Basin.展开更多
In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, w...In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, which considers the influence of viscous flow, Knudsen diffusion, surface diffusion, and adsorption layer thickness. A dis- crete-fracture model is used to simplify the fracture mod- cling, and a finite element method is applied to solve the model. The numerical simulation results indicate that with a decrease in the intrinsic matrix permeability, Knudsen diffusion and surface diffusion contributions to production become large and cannot be ignored. The existence of an adsorption layer on the nanopore surfaces reduces the effective pore radius and the effective porosity, resulting in low production from fractured horizontal wells. With a decrease in the pore radius, considering the adsorption layer, the production reduction rate increases. When the pore radius is less than 10 nm, because of the combined impacts of Knudsen diffusion, surface diffusion, and adsorption layers, the production of multi-stage fractured horizontal wells increases with a decrease in the pore pressure. When the pore pressure is lower than 30 MPa, the rate of production increase becomes larger with a decrease in pore pressure.展开更多
A series of M-substituted hexaaluminates LaMAl11O19-δ （M=Fe, Co, Ni, Mn, and Cu） were prepared and characterized by XRD, XPS, TPR and TGA techniques, respectively. They exhibited different reducibility and catalyti...A series of M-substituted hexaaluminates LaMAl11O19-δ （M=Fe, Co, Ni, Mn, and Cu） were prepared and characterized by XRD, XPS, TPR and TGA techniques, respectively. They exhibited different reducibility and catalytic activity for partial oxidation of methane （POM） to synthesis gas. Among the LaMAl11019-δ samples, LaNiAl11O19-δ showed the best catalytic activity for the topic reaction and selectivity for synthesis gas at 780 ℃ for 2 h. The conversion of CH4 was over 99.2%, and the product selectivity for both CO and H2 was above 90.3%.展开更多
In the DF1-1 Gas Field in the Yinggehai Basin, South China Sea, the velocity-depth plot and velocity spectra show significant variations from a linear trend, exhibiting a distinct reversal phenomenon. Velocity paramet...In the DF1-1 Gas Field in the Yinggehai Basin, South China Sea, the velocity-depth plot and velocity spectra show significant variations from a linear trend, exhibiting a distinct reversal phenomenon. Velocity parameters derived from velocity spectral analysis of the seismic data and sonic logs indicate that the interval velocity reverses below 2,100 m (2.2 s two-way time (TWT)) in the DF1-1 Gas Field. Some direct hydrocarbon indicators (DHIs) models developed for the shallow strata cannot be simply applied to the moderately to deeply buried strata for direct exploration target recognition because the velocity reversal has caused the middle-deep gas reservoirs to exhibit a moderate or weak seismic amplitude. The hydrocarbon indicator method of “Differential Interformational Velocity Analysis (DIVA)” with the aid of other hydrocarbon indicating techniques was employed to effectively identify DHIs in the middle-deep strata under velocity inversion. The result has shown that the DIVA technique can be effectively used as a DHI in both the shallow and the middle-deep strata in the study area with the shallow strata characterized by Type I DIVA anomaly and the middle-deep strata characterized by the Type II DIVA anomaly.展开更多
基金supported by the National Key Research and Development Program of China(No.2020YFE0202002)the National Natural Science Foundation of China(Nos.11875146 and U1932143)。
文摘Topmetal-M2 is a large-area pixel sensor chip fabricated using the GSMC 130 nm CMOS process in 2021.The pixel array of Topmetal-M2 consists of pixels of 400 rows×512 columns with a pixel pitch of 45μm×45μm.The array is divided into 16 subarrays,with pixels of 400 rows×32 columns per subarray.Each pixel incorporates two charge sensors:a diode sensor and a Topmetal sensor.The in-pixel circuit primarily consists of a charge-sensitive amplifier for energy measurements,a discriminator with a peak-holding circuit,and a time-to-amplitude converter for time-of-arrival measurements.The pixel of Topmetal-M2 has a charge input range of~0-3 k e-,a voltage output range of~0-180 mV,and a charge-voltage conversion gain of~59.56μV∕e-.The average equivalent noise charge of Topmetal-M2,which includes the readout electronic system noise,is~43.45 e-.In the scanning mode,the time resolution of Topmetal-M2 is 1 LSB=1.25μs,and the precision is^()7.41μs.At an operating voltage of 1.5 V,Topmetal-M2 has a power consumption of~49 mW∕cm~2.In this article,we provide a comprehensive overview of the chip architecture,pixel working principles,and functional behavior of Topmetal-M2.Furthermore,we present the results of preliminary tests conducted on Topmetal-M2,namely,alpha-particle and soft X-ray tests.
基金supported by Department of Physics and GXUNAOC Center for Astrophysics and Space Sciences,Guangxi UniversityThe National Natural Science Foundation of China(Nos.12027803,U1731239,12133003,12175241,U1938201,U1732266)the Guangxi Science Foundation(Nos.2018GXNSFGA281007,2018JJA110048).
文摘POLAR-2 is a gamma-ray burst(GRB)polarimeter that is designed to study the polarization in GRB radiation emissions,aiming to improve our knowledge of related mechanisms.POLAR-2 is expected to utilize an on-board polarimeter that is sensitive to soft X-rays(2-10 keV),called low-energy polarization detector.We have developed a new soft X-ray polari-zation detector prototype based on gas microchannel plates(GMCPs)and pixel chips(Topmetal).The GMCPs have bulk resistance,which prevents charging-up effects and ensures gain stability during operation.The detector is composed of low outgassing materials and is gas-sealed using a laser welding technique,ensuring long-term stability.A modulation factor of 41.28%±0.64% is obtained for a 4.5 keV polarized X-ray beam.A residual modulation of 1.96%±0.58% at 5.9 keV is observed for the entire sensitive area.
基金Project supported by the Foundation for Scientific Instrument and Equipment Development,Chinese Academy of Sciences(Grant No.YJKYYQ20170032)the National Natural Science Foundation of China(Grant No.61435012)
文摘The samples of InxGa（1-x）As/In（0.52）Al（0.48）As two-dimensional electron gas（2DEG）are grown by molecular beam epitaxy（MBE）.In the sample preparation process,the In content and spacer layer thickness are changed and two kinds of methods,i.e.,contrast body doping andδ-doping are used.The samples are analyzed by the Hall measurements at 300 Kand 77 K.The InxGa1-xAs/In0.52Al0.48As 2DEG channel structures with mobilities as high as 10289 cm^2/V·s（300 K）and42040 cm^2/V·s（77 K）are obtained,and the values of carrier concentration（Nc）are 3.465×10^12/cm^2 and 2.502×10^12/cm^2,respectively.The THz response rates of In P-based high electron mobility transistor（HEMT）structures with different gate lengths at 300 K and 77 K temperatures are calculated based on the shallow water wave instability theory.The results provide a reference for the research and preparation of In P-based HEMT THz detectors.
基金supported by the National Natural Science Foundation of China (Nos.11875146,U1932143)National Key Research and Development Program of China (No.2020YFE0202002)。
文摘This study presents an electronics system for cosmic X-ray polarization detection(CXPD).The CXPD was designed as a high-sensitivity soft X-ray polarimeter with a measurement energy range of 2-10 keV carried by a CubeSat.A stable and functionally complete electronics system under power and space constraints is a key challenge.The complete CXPD electronics system(CXPDES)comprises hardware and firmware.CXPDES adopts a three-layer electronic board structure based on functionality and available space.Two gas pixel detectors(GPDs)were placed on the top layer board,and CXPDES provided the GPDs with voltages up to-4000 V.Each GPD signal was digitized,compressed,encoded,and stored before being transmitted to the ground.The CXPDES provided stable and high-speed communication based on a scheme that separated command and data transmission,and it supports the CXPDES in-orbit upgrade.In addition,environmental monitors,silicon photomultiplier(SiPM)triggers,power management,GPDs configuration,and mode switches were included in the overall operating logic of the CXPDES.The results obtained by testing the CXPDES showed that it satisfied all the requirements of CXPD.The CXPDES provides design experience and technological readiness for future large-area X-ray polarimetry missions.
基金financial support from the National Science Foundation of China (Nos. 51374233, 51474235)the Postdoctoral Innovative Project Foundation of Shandong Province (No. 201602027)+2 种基金the Qingdao Postdoctoral Applied Research Project (No. 2015242)the Fundamental Research Funds for the Central Universities (No. 15CX06021A)the Graduate Student Innovation Project from China University of Petroleum (East China) (No. YCX2015011)
文摘Emulsifier-free poly（methyl methacrylate-styrene） [P（MMA-St）] nanospheres with an average particle size of 100 nm were synthesized in an isopropyl alcoholwater medium by a solvothermal method. Then, through radical graft copolymerization of thermo-sensitive mono- mer N-isopropylacrylamide （NIPAm） and hydrophilic monomer acrylic acid （AA） onto the surface of P（MMA- St） nanospheres at 80 ℃, a series of thermo-sensitive polymer nanospheres, named SD-SEAL with different lower critical solution temperatures （LCST）, were prepared by adjusting the mole ratio of NIPAm to AA. The products were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis, particle size distribution, and specific surface area analysis. The temperature-sensitive behavior was studied by light transmittance tests, while the sealing performance was investigated by pressure transmission tests with Lungmachi Formation shales. The experimental results showed that the synthesized nanoparticles are sensitive to temperature and had apparent LCST values which increased with an increase in hydrophilic monomer AA. When the temperature was higher than its LCST value, SD- SEAL played a dual role of physical plugging and chemical inhibition, slowed down pressure transmission, and reduced shale permeability remarkably. The plugged layer of shale was changed to being hydrophobic, which greatly improved the shale stability
文摘In this paper, the partial oxidation of methane to synthesis gas using lattice oxygen of La1- SrxMO3-λ (M=Fe, x Mn) perovskite oxides instead of molecular oxygen was investigated. The redox circulation between 11% O2/Ar flow and 11% CH4/He flow at 900℃ shows that methane can be oxidized to CO and H2 with a selectivity of over 90.7% using the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite oxides in an appropriate reaction condition, while the lost lattice x oxygen can be supplemented by air re-oxidation. It is viable for the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite x oxides instead of molecular oxygen to react with methane to synthesis gas in the redox mode.
基金Supported by the China National Science and Technology Major Project(2016ZX05024-003-001)
文摘Based on the study of natural gas resource, low buried hill trap formation mechanism, high quality reservoir control factors and natural gas preservation conditions, the formation conditions and reservoir accumulation characteristics of Bozhong 19-6 large condensate gas field were summarized. Large gas generation potential of multiple sets of thick humic-sapropelic source rocks in high maturity stage in Bozhong depression was the basis of large gas field formation. The multi-stage tectonic evolution since Indosinian period formed large-scale buried hill traps. The Tanlu fault activity formed multi-type reservoirs, and buried hill metamorphic rock of Archean and sand-conglomerate of Kongdian Formation were high-quality reservoirs. Thick overpressure lacustrine mudstone and weak neotectonic movement provided good preservation conditions. Bozhong 19-6 gas reservoir was a condensate gas reservoir with very high condensate oil content, and the gas origin was humic-sapropelic and kerogen-cracking gas, and the gas field had large gas thickness, high gas column characteristics and the accumulation process was first oil and then gas. The buried hill reservoir was a massive reservoir and the Kongdian reservoir was a stratified reservoir. The gas field had multi-channel hydrocarbon intense charge from overpressure source rocks, atmospheric-weak overpressure reservoir favorable for accumulation, thick overpressure mudstone caprock favorable for preservation, and natural gas ultra-late rapid accumulation model.
基金supported from the National Science and Technology Major Project under Grant No.2011ZX05030
文摘Deepwater oil and gas projects embody high risks from geology and engineering aspects, which exert substantial influence on project valuation. But the uncer- tainties may be converted to additional value to the projects in the case of flexible management. Given the flexibility of project management, this paper extends the classical real options model to a multi-factor model which contains oil price, geology, and engineering uncertainties. It then gives an application example of the new model to evaluate deepwater oil and gas projects with a numerical analytical method. Compared with other methods and models, this multi-factor real options model contains more project information. It reflects the potential value deriving not only from oil price variation but also from geology and engi- neering uncertainties, which provides more accurate and reliable valuation information for decision makers.
基金Supported by the CNOOC Science and Technology Project(KJZH-2021-0003-00,CNOOC-KJ 135 ZDXM 38 ZJ 03 ZJ).
文摘Based on analysis of newly collected 3D seismic and drilled well data,the geological structure and fault system of Baodao sag have been systematically examined to figure out characteristics of the transition fault terrace belt and its control on the formation of natural gas reservoirs.The research results show that the Baodao sag has the northern fault terrace belt,central depression belt and southern slope belt developed,among them,the northern fault terrace belt consists of multiple transition fault terrace belts such as Baodao B,A and C from west to east which control the source rocks,traps,reservoirs,oil and gas migration and hydrocarbon enrichment in the Baodao sag.The activity of the main fault of the transition belt in the sedimentary period of Yacheng Formation in the Early Oligocene controlled the hydrocarbon generation kitchen and hydrocarbon generation potential.From west to east,getting closer to the provenance,the transition belt increased in activity strength,thickness of source rock and scale of delta,and had multiple hydrocarbon generation depressions developed.The main fault had local compression under the background of tension and torsion,giving rise to composite traps under the background of large nose structure,and the Baodao A and Baodao C traps to the east are larger than Baodao B trap.Multiple fault terraces controlled the material source input from the uplift area to form large delta sand bodies,and the synthetic transition belt of the west and middle sections and the gentle slope of the east section of the F12 fault in the Baodao A transition belt controlled the input of two major material sources,giving rise to a number of delta lobes in the west and east branches.The large structural ridge formed under the control of the main fault close to the hydrocarbon generation center allows efficient migration and accumulation of oil and gas.The combination mode and active time of the main faults matched well with the natural gas charging period,resulting in the hydrocarbon gas enrichment.Baodao A transition belt is adjacent to Baodao 27,25 and 21 lows,where large braided river delta deposits supplied by Shenhu uplift provenance develop,and it is characterized by large structural ridges allowing high efficient hydrocarbon accumulation,parallel combination of main faults and early cessation of faulting activity,so it is a favorable area for hydrocarbon gas accumulation.Thick high-quality gas reservoirs have been revealed through drilling,leading to the discovery of the first large-scale gas field in Baodo 21-1 of Baodao sag.This discovery also confirms that the north transition zone of Songnan-Baodao sag has good reservoir forming conditions,and the transition fault terrace belt has great exploration potential eastward.
基金Supported by the China National Science and Technology Major Project (2016ZX05024-003)
文摘The Bohai Bay Basin is a typical oil-prone basin, in which natural gas geological reserves have a small proportion. In this basin, the gas source rock is largely medium-deep lake mudstone with oil-prone type Ⅱ2-Ⅱ1 kerogens, and natural gas preservation conditions are poor due to active late tectonic movements. The formation conditions of large natural gas fields in the Bohai Bay Basin have been elusive. Based on the exploration results of Bohai Bay Basin and comparison with large gas fields in China and abroad, the formation conditions of conventional large-scale natural gas reservoirs in the Bohai Bay Basin were examined from accumulation dynamics, structure and sedimentation. The results show that the formation conditions of conventional large natural gas reservoirs in Bohai Bay Basin mainly include one core element and two key elements. The core factor is the strong sealing of Paleogene "quilt-like" overpressure mudstone. The two key factors include the rapid maturation and high-intensity gas generation of source rock in the late stage and large scale reservoir. On this basis, large-scale nature gas accumulation models in the Bohai Bay Basin have been worked out, including regional overpressure mudstone enriching model, local overpressure mudstone depleting model, sand-rich sedimentary subsag depleting model and late strongly-developed fault depleting model. It is found that Bozhong sag, northern Liaozhong sag and Banqiao sag have favorable conditions for the formation of large-scale natural gas reservoirs, and are worth exploring. The study results have important guidance for exploration of large scale natural gas reservoirs in the Bohai Bay Basin.
基金supported by the National Natural Science Foundation of China (No. 51234007, No. 51490654, No. 51504276, and No. 51504277)Program for Changjiang Scholars and Innovative Research Team in University (IRT1294)+3 种基金the Natural Science Foundation of Shandong Province (ZR2014EL016, ZR2014EEP018)China Postdoctoral Science Foundation (No. 2014M551989 and No. 2015T80762)the Major Programs of Ministry of Education of China (No. 311009)Introducing Talents of Discipline to Universities (B08028)
文摘In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, which considers the influence of viscous flow, Knudsen diffusion, surface diffusion, and adsorption layer thickness. A dis- crete-fracture model is used to simplify the fracture mod- cling, and a finite element method is applied to solve the model. The numerical simulation results indicate that with a decrease in the intrinsic matrix permeability, Knudsen diffusion and surface diffusion contributions to production become large and cannot be ignored. The existence of an adsorption layer on the nanopore surfaces reduces the effective pore radius and the effective porosity, resulting in low production from fractured horizontal wells. With a decrease in the pore radius, considering the adsorption layer, the production reduction rate increases. When the pore radius is less than 10 nm, because of the combined impacts of Knudsen diffusion, surface diffusion, and adsorption layers, the production of multi-stage fractured horizontal wells increases with a decrease in the pore pressure. When the pore pressure is lower than 30 MPa, the rate of production increase becomes larger with a decrease in pore pressure.
基金This work was supported by the Education Department of Jilin Province and Science and Technology office of Siping Municipality.
文摘A series of M-substituted hexaaluminates LaMAl11O19-δ （M=Fe, Co, Ni, Mn, and Cu） were prepared and characterized by XRD, XPS, TPR and TGA techniques, respectively. They exhibited different reducibility and catalytic activity for partial oxidation of methane （POM） to synthesis gas. Among the LaMAl11019-δ samples, LaNiAl11O19-δ showed the best catalytic activity for the topic reaction and selectivity for synthesis gas at 780 ℃ for 2 h. The conversion of CH4 was over 99.2%, and the product selectivity for both CO and H2 was above 90.3%.
基金supported by the National Natural Science Foundation of China (No.40702024)the Project was sponsored by the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education of China (No.2009022014)Open Research Foundation of Key Laboratory of Tectonics and Petroleum Resources (China University of Geosciences),Ministry of Education (No.TPR-2009-33)
文摘In the DF1-1 Gas Field in the Yinggehai Basin, South China Sea, the velocity-depth plot and velocity spectra show significant variations from a linear trend, exhibiting a distinct reversal phenomenon. Velocity parameters derived from velocity spectral analysis of the seismic data and sonic logs indicate that the interval velocity reverses below 2,100 m (2.2 s two-way time (TWT)) in the DF1-1 Gas Field. Some direct hydrocarbon indicators (DHIs) models developed for the shallow strata cannot be simply applied to the moderately to deeply buried strata for direct exploration target recognition because the velocity reversal has caused the middle-deep gas reservoirs to exhibit a moderate or weak seismic amplitude. The hydrocarbon indicator method of “Differential Interformational Velocity Analysis (DIVA)” with the aid of other hydrocarbon indicating techniques was employed to effectively identify DHIs in the middle-deep strata under velocity inversion. The result has shown that the DIVA technique can be effectively used as a DHI in both the shallow and the middle-deep strata in the study area with the shallow strata characterized by Type I DIVA anomaly and the middle-deep strata characterized by the Type II DIVA anomaly.
