Existing numerical methods for complex composites, such as multiscale simulation and neural network algorithms, face significant limitations. Multiscale techniques are often prohibitively expensive for large models, w...Existing numerical methods for complex composites, such as multiscale simulation and neural network algorithms, face significant limitations. Multiscale techniques are often prohibitively expensive for large models, while neural networks struggle to represent underlying microscopic material properties. To overcome these challenges, a meso-micro scale numerical method using a virtual node approach is developed in this study. A Wbraid/Al/Epoxy functional structural material is fabricated, and a representative periodic unit cell is identified based on its architecture. The complex structure is then discretized into nodes, and mechanical interactions are governed by pre-defined computation rules. This virtual node method is systematically compared against both multiscale simulation and a neural network algorithm, with validation provided through mechanical experiments. The results demonstrate that the nodal operation strategy significantly reduces computational resource requirements. By quantifying microscopic bonding with coefficients, explicit interface treatment is avoided, granting the method strong adaptability to lattice materials. The method can simulate extremely complex structures using parameters from simple tests and is suited for large systems. Compared to three-point bending experiments, errors for multiscale, virtual node, and neural network methods were 12.4%, 6.9%, and 34.5%, respectively. Under dynamic compression, the errors were 2.7%, 9.3%, and 15.43%. The virtual node method demonstrated superior accuracy under static conditions, enabling efficient prediction and auxiliary development of complex structural materials.展开更多
To extract and display the significant information of combat systems,this paper introduces the methodology of functional cartography into combat networks and proposes an integrated framework named“functional cartogra...To extract and display the significant information of combat systems,this paper introduces the methodology of functional cartography into combat networks and proposes an integrated framework named“functional cartography of heterogeneous combat networks based on the operational chain”(FCBOC).In this framework,a functional module detection algorithm named operational chain-based label propagation algorithm(OCLPA),which considers the cooperation and interactions among combat entities and can thus naturally tackle network heterogeneity,is proposed to identify the functional modules of the network.Then,the nodes and their modules are classified into different roles according to their properties.A case study shows that FCBOC can provide a simplified description of disorderly information of combat networks and enable us to identify their functional and structural network characteristics.The results provide useful information to help commanders make precise and accurate decisions regarding the protection,disintegration or optimization of combat networks.Three algorithms are also compared with OCLPA to show that FCBOC can most effectively find functional modules with practical meaning.展开更多
Lithium-ion capacitors(LICs)combine the high power dens-ity of electrical double-layer capacitors with the high energy density of lithium-ion batteries.However,they face practical limitations due to the narrow operati...Lithium-ion capacitors(LICs)combine the high power dens-ity of electrical double-layer capacitors with the high energy density of lithium-ion batteries.However,they face practical limitations due to the narrow operating voltage window of their activated carbon(AC)cathodes.We report a scalable thermal treatment strategy to develop high-voltage-tolerant AC cathodes.Through controlled thermal treatment of commer-cial activated carbon(Raw-AC)under a H_(2)/Ar atmosphere at 400-800℃,the targeted reduction of degradation-prone functional groups can be achieved while preserving the critical pore structure and increasing graph-itic microcrystalline ordering.The AC treated at 400℃(HAC-400)had a significant increase in specific capacity(96.0 vs.75.1 mAh/g at 0.05 A/g)and better rate capability(61.1 vs.36.1 mAh/g at 5 A/g)in half-cell LICs,along with an 83.5%capacity retention over 7400 cycles within an extended voltage range of 2.0-4.2 V in full-cell LICs.Scalability was demonstrated by a 120 g batch production,enabling fabrication of pouch-type LICs with commercial hard carbon anodes that delivered a higher energy density of 28.3 Wh/kg at 1 C,and a peak power density of 12.1 kW/kg compared to devices using raw AC.This simple,industry-compatible approach may be used for producing ad-vanced cathode materials for practical high-performance LICs.展开更多
We have examined the theoretical implications of combining two main and three auxiliary ligands to form several Ir(Ⅲ)complexes featuring a transition metal as their core atom to identify some appropriate organic ligh...We have examined the theoretical implications of combining two main and three auxiliary ligands to form several Ir(Ⅲ)complexes featuring a transition metal as their core atom to identify some appropriate organic lightemitting diode(OLED)materials.By utilizing electronic structure,frontier molecular orbitals,minimum single-line absorption,triplet excited states,and emission spectral data derived from the density functional theory,the usefulness of these Ir(Ⅲ)complexes,including(piq)_(2)Ir(acac),(piq)_(2)Ir(tmd),(piq)_(2)Ir(tpip),(fpiq)_(2)Ir(acac),(fpiq)_(2)Ir(tmd),and(fpiq)_(2)Ir(tpip),in OLEDs was examined,where piq=1-phenylisoquinoline,fpiq=1-(4-fluorophenyl)isoquinoline,acac=(3Z)-4-hydroxypent-3-en-2-one,tmd=(4Z)-5-hydroxy-2,2,6,6-tetramethylhept-4-en-3-one,and tpip=tetraphenylimido-diphosphonate.These complexes all have low-efficiency roll-off properties,especially(fpiq)_(2)Ir(tpip).Some researchers have successfully synthesized complexes extremely similar to(piq)_(2)Ir(acac)through the Suzuki-Miyaura coupling reaction.展开更多
Cp_(2)TiCl_(2) as a Lewis acid precursor and nicotinic acid as a ligand have been used synergistically for the one-pot synthesis of 2-(N-substituted amino)-1,4-naphthoquinones.This method establishes a general strateg...Cp_(2)TiCl_(2) as a Lewis acid precursor and nicotinic acid as a ligand have been used synergistically for the one-pot synthesis of 2-(N-substituted amino)-1,4-naphthoquinones.This method establishes a general strategy for the functionalization and conversion of C-H bonds of 1,4-naphthoquinones into C-N bonds,providing an effective route to synthesize 2-(N-substituted amino)-1,4-naphthoquinone with high yield under mild conditions.Additionally,the synergistic catalytic mechanism was investigated by 1H NMR titration experiments and LC-MS analysis,with experimental results sufficiently and consistently supporting the proposed mechanism of the catalytic cycle.展开更多
This study innovatively employs functional near-infrared spectroscopy(fNIRS)technology to investigate passengers’brain responses to various external stimuli during high-speed train operations,assessing their impact o...This study innovatively employs functional near-infrared spectroscopy(fNIRS)technology to investigate passengers’brain responses to various external stimuli during high-speed train operations,assessing their impact on passenger comfort.Three stimuli are examined:passing through tunnels,sonic booms at tunnel exits,and two trains meeting within the tunnel.The analysis of environmental variables,including cabin noise,cabin-to-external pressure,and cabin-to-body acceleration,reveals that changes in auditory and pressure levels during the tunnel experience led to an 87%increase in oxygenated hemoglobin(HbO)levels in the temporal lobe(TL).This reflects a brief discomfort that subsides as passengers adapt,with HbO levels nearly returning to pre-tunnel levels upon exit.Among the stimuli,the sonic boom triggered the most significant neural response,with HbO fluctuations increased by 175%.In contrast,the impact of train meetings was minor,yielding an average HbO increase of only 14.21%.Connectivity analysis further shows significant enhancements in brain functional connectivity during tunnel entrance and sonic boom scenarios,with increases of 52%and 80%,respectively.Our findings contribute to passenger comfort assessment by establishing objective neurophysiological measures that quantify previously subjective experiences.The application of fNIRS in this dynamic environment creates new possibilities for evidence-based comfort optimization in railway design.展开更多
The nanofluid-based direct absorption solar collector(NDASC)ensures that solar radiation passing through the tube wall is directly absorbed by the nanofluid,reducing thermal resistance in the energy transfer process.H...The nanofluid-based direct absorption solar collector(NDASC)ensures that solar radiation passing through the tube wall is directly absorbed by the nanofluid,reducing thermal resistance in the energy transfer process.However,further exploration is required to suppress the outward thermal losses from the nanofluid at high temperatures.Herein,this paper proposes a novel NDASC in which the outer surface of the collector tube is covered with functional coatings and a three-dimensional computational fluid dynamics model is established to study the energy flow distributions on the collector within the temperature range of 400-600 K.When the nanofluid’s absorption coefficient reaches 80 m^(-1),the NDASC shows the optimal thermal performance,and the NDASC with local Sn-In_(2)O_(3) coating achieves a 7.8% improvement in thermal efficiency at 400 K compared to the original NDASC.Furthermore,hybrid coatings with Sn In_(2)O_(3)/WTi-Al_(2)O_(3) are explored,and the optimal coverage angles are determined.The NDASC with such coatings shows a 10.22%-17.9% increase in thermal efficiency compared to the original NDASC and a 7.6%-19.5% increase compared to the traditional surface-type solar collectors,demonstrating the effectiveness of the proposed energy flow control strategy for DASCs.展开更多
Recent advancements in additive manufacturing(AM)have revolutionized the design and production of complex engineering microstructures.Despite these advancements,their mathematical modeling and computational analysis r...Recent advancements in additive manufacturing(AM)have revolutionized the design and production of complex engineering microstructures.Despite these advancements,their mathematical modeling and computational analysis remain significant challenges.This research aims to develop an effective computational method for analyzing the free vibration of functionally graded(FG)microplates under high temperatures while resting on a Pasternak foundation(PF).This formulation leverages a new thirdorder shear deformation theory(new TSDT)for improved accuracy without requiring shear correction factors.Additionally,the modified couple stress theory(MCST)is incorporated to account for sizedependent effects in microplates.The PF is characterized by two parameters including spring stiffness(k_(w))and shear layer stiffness(k_(s)).To validate the proposed method,the results obtained are compared with those of the existing literature.Furthermore,numerical examples explore the influence of various factors on the high-temperature free vibration of FG microplates.These factors include the length scale parameter(l),geometric dimensions,material properties,and the presence of the elastic foundation.The findings significantly enhance our comprehension of the free vibration of FG microplates in high thermal environments.In addition,the findings significantly enhance our comprehension of the free vibration of FG microplates in high thermal environments.In addition,the results of this research will have great potential in military and defense applications such as components of submarines,fighter aircraft,and missiles.展开更多
In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-ele...In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-electric surface layers(referred to as"FG-TPMS-MEE curved-doubly shells")subjected to low-velocity impact loads.This study presents low-velocity impact load model based on a single springmass(S-M)approach.The FG-TPMS-MEE curved-doubly shells are covered with two magneto-electric surface layers,while the core layer consists of three types:I-graph and Wrapped Package-graph(IWP),Gyroid(G),and Primitive(P),with various graded functions.These types are notable for their exceptional stiffness-to-weight ratios,enabling a wide range of potential applications.The Maxwell equations and electromagnetic boundary conditions are applied to compute the change in electric potentials and magnetic potentials.The equilibrium equations of the shell are derived from a refined higher-order shear deformation theory(HSDT),and the transient responses of the FG-TPMS-MEE curveddoubly shells are subsequently determined using Newmark's direct integration method.These results have applications in structural vibration control and the analysis of structures subjected to impact or explosive loads.Furthermore,this study provides a theoretical prediction of the low-velocity impact load and magneto-electric-elastic effects on the free vibration and transient response of FG-TPMS-MEE curved-doubly shells.展开更多
OBJECTIVE To investigate the intervention effects of tissue-bone homeostasis manipulation(TBHM)on peripatellar biomechanical parameters and knee joint function in knee osteoarthritis(KOA)patients.METHODS Sixty patient...OBJECTIVE To investigate the intervention effects of tissue-bone homeostasis manipulation(TBHM)on peripatellar biomechanical parameters and knee joint function in knee osteoarthritis(KOA)patients.METHODS Sixty patients with KOA(Kellgren-Lawrence gradeⅡ-Ⅲ)were recruited from the Acupuncture-Moxibustion Rehabilitation Department,Anhui University of Chinese Medicine between October 2024 and May 2025.Participants were randomized into a TBHM group(n=30)or a transcutaneous electrical neuromuscular stimulation(TENS)group(n=30).Using two-way repeated measures ANOVA,biomechanical indicators,including rectus femoris tension,vastus medialis tension,vastus lateralis tension,patellar ligament tension,lateral patellar displacement(LPD),medial patellar displacement(MPD),normalized patellar mobility(LPD/patellar width[PW],MPD/PW),knee flexion range of motion,and functional indicators,including KOOS subscales,time up and go test(TUGT),were compared between groups at baseline and after 6 weeks of intervention.RESULTS After intervention,all biomechanical and knee joint function indicators in the TBHM group were significantly improved(P<0.05,P<0.01),while only the vastus medialis tension,TUGT and KOOS Pain,ADL and QoL scores in the control group were significantly improved(P<0.01).The improvement amplitudes of biomechanical indicators in the TBHM group,including rectus femoris tension,vastus lateralis tension,patellar ligament tension,MPD/PW,LPD/PW and knee flexion range of motion were better than those in the control group(P<0.05,P<0.01).In the functional evaluation,the interaction effects of the TBHM group in all dimensions of the KOOS score and TUGT were statistically significant(P<0.05,P<0.01).Post-hoc simple effect analysis confirmed that there were significant differences in the above indicators between the two groups after intervention(P<0.05),and all indicators showed a significant main effect of time(P<0.01),suggesting that the intervention measures had continuous and cumulative curative effects.CONCLUSION TBHM effectively improves joint function and quality of life in KOA patients by restoring dynamic equilibrium in soft tissue tension and patellar mobility,ultimately achieving the therapeutic goal of concurrent tissue-bone management.展开更多
For language users,meaning is the central fact about language,and meaning emerges from a seamless union of wording and context.Functional Grammar attempts to face that uncomfortable fact head-on and to establish a uni...For language users,meaning is the central fact about language,and meaning emerges from a seamless union of wording and context.Functional Grammar attempts to face that uncomfortable fact head-on and to establish a unified model of language which in principle allows the links to be made within the same description.展开更多
The relationship between Solidago canadensis L. invasion and soil microbial community diversity including functional and structure diversities was studied across the invasive gradients varying from 0 to 40%, 80%, and ...The relationship between Solidago canadensis L. invasion and soil microbial community diversity including functional and structure diversities was studied across the invasive gradients varying from 0 to 40%, 80%, and 100% coverage of Solidago canadensis L. using sole carbon source utilization profiles analyses, principle component analysis （PCA） and phospholipid fatty acids （PLFA） profiles analyses. The results show the characteristics of soil microbial community functional and structure diversity in invaded soils strongly changed by Solidago canadensis L. invasion. Solidago canadensis L. invasion tended to result in higher substrate richness, and functional diversity. As compared to the native and ecotones, average utilization of specific substrate guilds of soil microbe was the highest in Solidago canadensis L. monoculture. Soil microbial functional diversity in Solidago canadensis L. monoculture was distinctly separated from the native area and the ecotones. Aerobic bacteria, fungi and actinomycetes population significantly increased but anaerobic bacteria decreased in the soil with Solidago canadensis L. monoculture. The ratio of cyl9：0 to 18：1 co7 gradually declined but mono/sat and fung/bact PLFAs increased when Solidago canadensis L. became more dominant. The microbial community composition clearly separated the native soil from the invaded soils by PCA analysis, especially 18： lco7c, 16： lco7t, 16： lco5c and 18：2co6, 9 were present in higher concentrations for exotic soil. In conclusion, Solidago canadensis L. invasion could create better soil conditions by improving soil microbial community structure and functional diversity, which in turn was more conducive to the growth ofSolidago canadensis L.展开更多
This study aims to determine the differences in leaf functional traits and phenotypic plasticity of leaf functional traits between exotic and native Compositae plant species. Leaf width of exotic plants was significan...This study aims to determine the differences in leaf functional traits and phenotypic plasticity of leaf functional traits between exotic and native Compositae plant species. Leaf width of exotic plants was significantly lower than that of native species. Leaf length, specific leaf area(SLA), single-leaf wet and dry weights, leaf moisture, and leaf thickness of exotic plants were also lower than those of native species but not significantly. The leaf shape index of exotic plants was higher than that of native species but not significantly. This implies that the relatively low leaf construction cost for exotic plants may play an important role in the success of their invasions. The higher leaf shape index and lower leaf width of exotic plants can enhance the efficiency of resource capture(especially sunlight capture) via adjustments to leaf shape and size, thereby increasing the survival of exotic plants. The plasticity indices of single-leaf wet weight and leaf thickness of exotic plants were significantly lower than those of native species. The lower phenotypic plasticity of single-leaf wet weight and leaf thickness of exotic plants may be the result of a cost to plasticity. That is, if the plasticity is too high, the fitness of plant species might be reduced sharply under unfavorable environments. Thus, lower plasticity of leaf functional traits may compensate for the negative impact of adverse environments and stabilize leaf construction costs for exotic plants. Moreover, reduced phenotypic plasticity might be one of the key competitive strategies by which exotic plants successfully invade new habitats. Overall, exotic plants did not always exhibit higher values of leaf functional traits or increased phenotypic plasticity of leaf functional traits compared with native species.展开更多
Non lubricated slide performance of functional grade copper matrix composite,fabricated using horizontal centrifuge cast technique was investigated using pin-on-disc tribo-tester.Rate of wear and friction coefficient ...Non lubricated slide performance of functional grade copper matrix composite,fabricated using horizontal centrifuge cast technique was investigated using pin-on-disc tribo-tester.Rate of wear and friction coefficient of the inner wall thickness of hollow cylindrical cast specimen was analyzed using Taguchi based L27 orthogonal array,where the percentage of graphite particles were observed higher.Variable process parameters those influenced the rate of wear directly or indirectly were:applied load(15,25 and 35 N),slide velocity(1.5,2.5 and 3.5 m/s)and slide distance(750,1500 and 2250 m).Rate of wear and friction coefficient showed a proportional dependency with applied load and slide distance,whereas showing a decline during intermediate slide velocity.Signal-to-Noise ratio predicted the minimal tribo-condition,on‘smaller-the-better’basis.Analysis of Variance technique quantified the influence of affecting parameters,along with their interactions.Regression analysis was utilized for the validation of the experimental data.Micrographs and scanning electron microscopy exhibited the wear mechanisms and mechanically mixed layer formation during worn surfaces analysis.展开更多
Because co-occurring native and invasive plants are subjected to similar environmental selection pressures,the differences in functional traits and reproductive allocation strategies between native and invasive plants...Because co-occurring native and invasive plants are subjected to similar environmental selection pressures,the differences in functional traits and reproductive allocation strategies between native and invasive plants may be closely related to the success of the latter.Accordingly,this study examines differences in functional traits and reproductive allocation strategies between native and invasive plants in Eastern China.Plant height,branch number,reproductive branch number,the belowground-to-aboveground biomass ratio,and the reproductive allocation coefficient of invasive plants were all notably higher than those of native species.Additionally,the specific leaf area(SLA)values of invasive plants were remarkably lower than those of native species.Plasticity indexes of SLA,maximum branch angle,and branch number of invasive plants were each notably lower than those of native species.The reproductive allocation coefficient was positively correlated with reproductive branch number and the belowground-to-aboveground biomass ratio but exhibited negative correlations with SLA and aboveground biomass.Plant height,branch number,reproductive branch number,the belowground-to-aboveground biomass ratio,and the reproductive allocation coefficient of invasive plants may strongly influence the success of their invasions.展开更多
The control law design for a near-space hypersonic vehicle(NHV)is highly challenging due to its inherent nonlinearity,plant uncertainties and sensitivity to disturbances.This paper presents a novel functional link net...The control law design for a near-space hypersonic vehicle(NHV)is highly challenging due to its inherent nonlinearity,plant uncertainties and sensitivity to disturbances.This paper presents a novel functional link network(FLN)control method for an NHV with dynamical thrust and parameter uncertainties.The approach devises a new partially-feedback-functional-link-network(PFFLN)adaptive law and combines it with the nonlinear generalized predictive control(NGPC)algorithm.The PFFLN is employed for approximating uncertainties in flight.Its weights are online tuned based on Lyapunov stability theorem for the first time.The learning process does not need any offline training phase.Additionally,a robust controller with an adaptive gain is designed to offset the approximation error.Finally,simulation results show a satisfactory performance for the NHV attitude tracking,and also illustrate the controller's robustness.展开更多
Chemical concepts such as structure,bonding,reactivity,etc.have been widely used in the literature and text books to appreciate molecular properties and chemical transformations.Even though modern theoretical and comp...Chemical concepts such as structure,bonding,reactivity,etc.have been widely used in the literature and text books to appreciate molecular properties and chemical transformations.Even though modern theoretical and computational chemistry is well established from the perspective of accuracy and complexity,how to quantify these concepts is a still unresolved task.Conceptual density functional theory and its related recent developments provide unique opportunities to tackle this problem.In this Special Issue,27 contributions from top investigators over the world are collected to highlight the state-of-art research on this topic,which not only showcases the status of where we are now but also unveils a number to possible future directions to be pursued.展开更多
In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive fun...In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive functional control(AFPFC) scheme for multivariable nonlinear systems was proposed.Firstly,multivariable nonlinear systems were described based on Takagi-Sugeno(T-S) fuzzy models;assuming that the antecedent parameters of T-S models were kept,the consequent parameters were identified on-line by using the weighted recursive least square(WRLS) method.Secondly,the identified T-S models were linearized to be time-varying state space model at each sampling instant.Finally,by using linear predictive control technique the analysis solution of the optimal control law of AFPFC was established.The application results for pH neutralization process show that the absolute error between the identified T-S model output and the process output is smaller than 0.015;the tracking ability of the proposed AFPFC is superior to that of non-AFPFC(NAFPFC) for pH process without disturbances,the overshoot of the effluent pH value of AFPFC with disturbances is decreased by 50% compared with that of NAFPFC;when the process parameters of AFPFC vary with time the integrated absolute error(IAE) performance index still retains to be less than 200 compared with that of NAFPFC.展开更多
Pyrite （FeS2） bulk and （100） surface properties and the oxygen adsorption on the surface were studied by using density functional theory methods. The results show that in the formation of FeS2 （100） surface, the...Pyrite （FeS2） bulk and （100） surface properties and the oxygen adsorption on the surface were studied by using density functional theory methods. The results show that in the formation of FeS2 （100） surface, there exists a process of electron transfer from Fe dangling bond to S dangling bond. In this situation, surface Fe and S atoms have more ionic properties. Both Fe2+ and S2- have high electrochemistry reduction activity, which is the base for oxygen adsorption. From the viewpoint of adsorption energy, the parallel form oxygen adsorption is in preference. The result also shows that the state of oxygen absorbed on FeS2 surface acts as peroxides rather than O2.展开更多
Lithium sulfur(Li/S)is a promising candidate of next generation of rechargeable batteries because of its extremely high specific capacity and abundant natural resources.However,the safety issue might be one of the mos...Lithium sulfur(Li/S)is a promising candidate of next generation of rechargeable batteries because of its extremely high specific capacity and abundant natural resources.However,the safety issue might be one of the most important factors which hinder their practical applications.Here a highly effective flame-retarding additive,ethoxypentafluorocyclotriphosphazene(PFPN),is firstly applied in Li/S batteries to improve their thermal safety properties.The addition of about 5%(weight ratio)PFPN makes the highly flammable liquid electrolyte totally nonflammable.Furthermore,the addition of PFPN simultaneously reduces the polarization voltage and obviously enhances the rate capability of sulfur-based composite materials.All these results indicate that PFPN is a favorable flame inhibiting additive in conventional liquid electrolytes for rechargeable lithium sulfur batteries.展开更多
文摘Existing numerical methods for complex composites, such as multiscale simulation and neural network algorithms, face significant limitations. Multiscale techniques are often prohibitively expensive for large models, while neural networks struggle to represent underlying microscopic material properties. To overcome these challenges, a meso-micro scale numerical method using a virtual node approach is developed in this study. A Wbraid/Al/Epoxy functional structural material is fabricated, and a representative periodic unit cell is identified based on its architecture. The complex structure is then discretized into nodes, and mechanical interactions are governed by pre-defined computation rules. This virtual node method is systematically compared against both multiscale simulation and a neural network algorithm, with validation provided through mechanical experiments. The results demonstrate that the nodal operation strategy significantly reduces computational resource requirements. By quantifying microscopic bonding with coefficients, explicit interface treatment is avoided, granting the method strong adaptability to lattice materials. The method can simulate extremely complex structures using parameters from simple tests and is suited for large systems. Compared to three-point bending experiments, errors for multiscale, virtual node, and neural network methods were 12.4%, 6.9%, and 34.5%, respectively. Under dynamic compression, the errors were 2.7%, 9.3%, and 15.43%. The virtual node method demonstrated superior accuracy under static conditions, enabling efficient prediction and auxiliary development of complex structural materials.
文摘To extract and display the significant information of combat systems,this paper introduces the methodology of functional cartography into combat networks and proposes an integrated framework named“functional cartography of heterogeneous combat networks based on the operational chain”(FCBOC).In this framework,a functional module detection algorithm named operational chain-based label propagation algorithm(OCLPA),which considers the cooperation and interactions among combat entities and can thus naturally tackle network heterogeneity,is proposed to identify the functional modules of the network.Then,the nodes and their modules are classified into different roles according to their properties.A case study shows that FCBOC can provide a simplified description of disorderly information of combat networks and enable us to identify their functional and structural network characteristics.The results provide useful information to help commanders make precise and accurate decisions regarding the protection,disintegration or optimization of combat networks.Three algorithms are also compared with OCLPA to show that FCBOC can most effectively find functional modules with practical meaning.
文摘Lithium-ion capacitors(LICs)combine the high power dens-ity of electrical double-layer capacitors with the high energy density of lithium-ion batteries.However,they face practical limitations due to the narrow operating voltage window of their activated carbon(AC)cathodes.We report a scalable thermal treatment strategy to develop high-voltage-tolerant AC cathodes.Through controlled thermal treatment of commer-cial activated carbon(Raw-AC)under a H_(2)/Ar atmosphere at 400-800℃,the targeted reduction of degradation-prone functional groups can be achieved while preserving the critical pore structure and increasing graph-itic microcrystalline ordering.The AC treated at 400℃(HAC-400)had a significant increase in specific capacity(96.0 vs.75.1 mAh/g at 0.05 A/g)and better rate capability(61.1 vs.36.1 mAh/g at 5 A/g)in half-cell LICs,along with an 83.5%capacity retention over 7400 cycles within an extended voltage range of 2.0-4.2 V in full-cell LICs.Scalability was demonstrated by a 120 g batch production,enabling fabrication of pouch-type LICs with commercial hard carbon anodes that delivered a higher energy density of 28.3 Wh/kg at 1 C,and a peak power density of 12.1 kW/kg compared to devices using raw AC.This simple,industry-compatible approach may be used for producing ad-vanced cathode materials for practical high-performance LICs.
文摘We have examined the theoretical implications of combining two main and three auxiliary ligands to form several Ir(Ⅲ)complexes featuring a transition metal as their core atom to identify some appropriate organic lightemitting diode(OLED)materials.By utilizing electronic structure,frontier molecular orbitals,minimum single-line absorption,triplet excited states,and emission spectral data derived from the density functional theory,the usefulness of these Ir(Ⅲ)complexes,including(piq)_(2)Ir(acac),(piq)_(2)Ir(tmd),(piq)_(2)Ir(tpip),(fpiq)_(2)Ir(acac),(fpiq)_(2)Ir(tmd),and(fpiq)_(2)Ir(tpip),in OLEDs was examined,where piq=1-phenylisoquinoline,fpiq=1-(4-fluorophenyl)isoquinoline,acac=(3Z)-4-hydroxypent-3-en-2-one,tmd=(4Z)-5-hydroxy-2,2,6,6-tetramethylhept-4-en-3-one,and tpip=tetraphenylimido-diphosphonate.These complexes all have low-efficiency roll-off properties,especially(fpiq)_(2)Ir(tpip).Some researchers have successfully synthesized complexes extremely similar to(piq)_(2)Ir(acac)through the Suzuki-Miyaura coupling reaction.
基金2024 Special Talent Introduction Projects of Key R&D Program of Ningxia Hui Autonomous Region(2024BEH04049)the 2024 Guyuan City Innovation-Driven Achievement Transformation Project(2024BGTYF01-47)2025 Ningxia Natural Science Foundation Program(2025AAC030624).
文摘Cp_(2)TiCl_(2) as a Lewis acid precursor and nicotinic acid as a ligand have been used synergistically for the one-pot synthesis of 2-(N-substituted amino)-1,4-naphthoquinones.This method establishes a general strategy for the functionalization and conversion of C-H bonds of 1,4-naphthoquinones into C-N bonds,providing an effective route to synthesize 2-(N-substituted amino)-1,4-naphthoquinone with high yield under mild conditions.Additionally,the synergistic catalytic mechanism was investigated by 1H NMR titration experiments and LC-MS analysis,with experimental results sufficiently and consistently supporting the proposed mechanism of the catalytic cycle.
基金Project(52202426)supported by the National Natural Science Foundation of ChinaProjects(15205723,15226424)supported by the Research Grants Council(RGC)of the Hong Kong Special Administrative Region,ChinaProject(KBBY1)supported by the Innovation and Technology Commission of the Hong Kong Special Administrative Region。
文摘This study innovatively employs functional near-infrared spectroscopy(fNIRS)technology to investigate passengers’brain responses to various external stimuli during high-speed train operations,assessing their impact on passenger comfort.Three stimuli are examined:passing through tunnels,sonic booms at tunnel exits,and two trains meeting within the tunnel.The analysis of environmental variables,including cabin noise,cabin-to-external pressure,and cabin-to-body acceleration,reveals that changes in auditory and pressure levels during the tunnel experience led to an 87%increase in oxygenated hemoglobin(HbO)levels in the temporal lobe(TL).This reflects a brief discomfort that subsides as passengers adapt,with HbO levels nearly returning to pre-tunnel levels upon exit.Among the stimuli,the sonic boom triggered the most significant neural response,with HbO fluctuations increased by 175%.In contrast,the impact of train meetings was minor,yielding an average HbO increase of only 14.21%.Connectivity analysis further shows significant enhancements in brain functional connectivity during tunnel entrance and sonic boom scenarios,with increases of 52%and 80%,respectively.Our findings contribute to passenger comfort assessment by establishing objective neurophysiological measures that quantify previously subjective experiences.The application of fNIRS in this dynamic environment creates new possibilities for evidence-based comfort optimization in railway design.
基金Project(52476095)supported by the National Natural Science Foundation of ChinaProject(kq2506013)supported by Changsha Outstanding Innovative Youth Training Program,China。
文摘The nanofluid-based direct absorption solar collector(NDASC)ensures that solar radiation passing through the tube wall is directly absorbed by the nanofluid,reducing thermal resistance in the energy transfer process.However,further exploration is required to suppress the outward thermal losses from the nanofluid at high temperatures.Herein,this paper proposes a novel NDASC in which the outer surface of the collector tube is covered with functional coatings and a three-dimensional computational fluid dynamics model is established to study the energy flow distributions on the collector within the temperature range of 400-600 K.When the nanofluid’s absorption coefficient reaches 80 m^(-1),the NDASC shows the optimal thermal performance,and the NDASC with local Sn-In_(2)O_(3) coating achieves a 7.8% improvement in thermal efficiency at 400 K compared to the original NDASC.Furthermore,hybrid coatings with Sn In_(2)O_(3)/WTi-Al_(2)O_(3) are explored,and the optimal coverage angles are determined.The NDASC with such coatings shows a 10.22%-17.9% increase in thermal efficiency compared to the original NDASC and a 7.6%-19.5% increase compared to the traditional surface-type solar collectors,demonstrating the effectiveness of the proposed energy flow control strategy for DASCs.
文摘Recent advancements in additive manufacturing(AM)have revolutionized the design and production of complex engineering microstructures.Despite these advancements,their mathematical modeling and computational analysis remain significant challenges.This research aims to develop an effective computational method for analyzing the free vibration of functionally graded(FG)microplates under high temperatures while resting on a Pasternak foundation(PF).This formulation leverages a new thirdorder shear deformation theory(new TSDT)for improved accuracy without requiring shear correction factors.Additionally,the modified couple stress theory(MCST)is incorporated to account for sizedependent effects in microplates.The PF is characterized by two parameters including spring stiffness(k_(w))and shear layer stiffness(k_(s)).To validate the proposed method,the results obtained are compared with those of the existing literature.Furthermore,numerical examples explore the influence of various factors on the high-temperature free vibration of FG microplates.These factors include the length scale parameter(l),geometric dimensions,material properties,and the presence of the elastic foundation.The findings significantly enhance our comprehension of the free vibration of FG microplates in high thermal environments.In addition,the findings significantly enhance our comprehension of the free vibration of FG microplates in high thermal environments.In addition,the results of this research will have great potential in military and defense applications such as components of submarines,fighter aircraft,and missiles.
文摘In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-electric surface layers(referred to as"FG-TPMS-MEE curved-doubly shells")subjected to low-velocity impact loads.This study presents low-velocity impact load model based on a single springmass(S-M)approach.The FG-TPMS-MEE curved-doubly shells are covered with two magneto-electric surface layers,while the core layer consists of three types:I-graph and Wrapped Package-graph(IWP),Gyroid(G),and Primitive(P),with various graded functions.These types are notable for their exceptional stiffness-to-weight ratios,enabling a wide range of potential applications.The Maxwell equations and electromagnetic boundary conditions are applied to compute the change in electric potentials and magnetic potentials.The equilibrium equations of the shell are derived from a refined higher-order shear deformation theory(HSDT),and the transient responses of the FG-TPMS-MEE curveddoubly shells are subsequently determined using Newmark's direct integration method.These results have applications in structural vibration control and the analysis of structures subjected to impact or explosive loads.Furthermore,this study provides a theoretical prediction of the low-velocity impact load and magneto-electric-elastic effects on the free vibration and transient response of FG-TPMS-MEE curved-doubly shells.
文摘OBJECTIVE To investigate the intervention effects of tissue-bone homeostasis manipulation(TBHM)on peripatellar biomechanical parameters and knee joint function in knee osteoarthritis(KOA)patients.METHODS Sixty patients with KOA(Kellgren-Lawrence gradeⅡ-Ⅲ)were recruited from the Acupuncture-Moxibustion Rehabilitation Department,Anhui University of Chinese Medicine between October 2024 and May 2025.Participants were randomized into a TBHM group(n=30)or a transcutaneous electrical neuromuscular stimulation(TENS)group(n=30).Using two-way repeated measures ANOVA,biomechanical indicators,including rectus femoris tension,vastus medialis tension,vastus lateralis tension,patellar ligament tension,lateral patellar displacement(LPD),medial patellar displacement(MPD),normalized patellar mobility(LPD/patellar width[PW],MPD/PW),knee flexion range of motion,and functional indicators,including KOOS subscales,time up and go test(TUGT),were compared between groups at baseline and after 6 weeks of intervention.RESULTS After intervention,all biomechanical and knee joint function indicators in the TBHM group were significantly improved(P<0.05,P<0.01),while only the vastus medialis tension,TUGT and KOOS Pain,ADL and QoL scores in the control group were significantly improved(P<0.01).The improvement amplitudes of biomechanical indicators in the TBHM group,including rectus femoris tension,vastus lateralis tension,patellar ligament tension,MPD/PW,LPD/PW and knee flexion range of motion were better than those in the control group(P<0.05,P<0.01).In the functional evaluation,the interaction effects of the TBHM group in all dimensions of the KOOS score and TUGT were statistically significant(P<0.05,P<0.01).Post-hoc simple effect analysis confirmed that there were significant differences in the above indicators between the two groups after intervention(P<0.05),and all indicators showed a significant main effect of time(P<0.01),suggesting that the intervention measures had continuous and cumulative curative effects.CONCLUSION TBHM effectively improves joint function and quality of life in KOA patients by restoring dynamic equilibrium in soft tissue tension and patellar mobility,ultimately achieving the therapeutic goal of concurrent tissue-bone management.
文摘For language users,meaning is the central fact about language,and meaning emerges from a seamless union of wording and context.Functional Grammar attempts to face that uncomfortable fact head-on and to establish a unified model of language which in principle allows the links to be made within the same description.
基金Project(2009QNA6015) supported by the Fundamental Research Funds for the Central Universities of ChinaProject(Y3110055)supported by the Natural Science Foundation of Zhejiang Province,ChinaProject(Y200803219) supported by the Foundation of Zhejiang Educational Committee of China
文摘The relationship between Solidago canadensis L. invasion and soil microbial community diversity including functional and structure diversities was studied across the invasive gradients varying from 0 to 40%, 80%, and 100% coverage of Solidago canadensis L. using sole carbon source utilization profiles analyses, principle component analysis （PCA） and phospholipid fatty acids （PLFA） profiles analyses. The results show the characteristics of soil microbial community functional and structure diversity in invaded soils strongly changed by Solidago canadensis L. invasion. Solidago canadensis L. invasion tended to result in higher substrate richness, and functional diversity. As compared to the native and ecotones, average utilization of specific substrate guilds of soil microbe was the highest in Solidago canadensis L. monoculture. Soil microbial functional diversity in Solidago canadensis L. monoculture was distinctly separated from the native area and the ecotones. Aerobic bacteria, fungi and actinomycetes population significantly increased but anaerobic bacteria decreased in the soil with Solidago canadensis L. monoculture. The ratio of cyl9：0 to 18：1 co7 gradually declined but mono/sat and fung/bact PLFAs increased when Solidago canadensis L. became more dominant. The microbial community composition clearly separated the native soil from the invaded soils by PCA analysis, especially 18： lco7c, 16： lco7t, 16： lco5c and 18：2co6, 9 were present in higher concentrations for exotic soil. In conclusion, Solidago canadensis L. invasion could create better soil conditions by improving soil microbial community structure and functional diversity, which in turn was more conducive to the growth ofSolidago canadensis L.
基金Project(31300343)supported by the National Natural Science Foundation of ChinaProject(Y20160023)supported by Open Science Research Fund of State Key Laboratory of Soil and Sustainable Agriculture,Institute of Soil Science,Chinese Academy of Sciences,Chinasupported by Jiangsu Collaborative Innovation Center of Technology and Material of Water Treatment,China
文摘This study aims to determine the differences in leaf functional traits and phenotypic plasticity of leaf functional traits between exotic and native Compositae plant species. Leaf width of exotic plants was significantly lower than that of native species. Leaf length, specific leaf area(SLA), single-leaf wet and dry weights, leaf moisture, and leaf thickness of exotic plants were also lower than those of native species but not significantly. The leaf shape index of exotic plants was higher than that of native species but not significantly. This implies that the relatively low leaf construction cost for exotic plants may play an important role in the success of their invasions. The higher leaf shape index and lower leaf width of exotic plants can enhance the efficiency of resource capture(especially sunlight capture) via adjustments to leaf shape and size, thereby increasing the survival of exotic plants. The plasticity indices of single-leaf wet weight and leaf thickness of exotic plants were significantly lower than those of native species. The lower phenotypic plasticity of single-leaf wet weight and leaf thickness of exotic plants may be the result of a cost to plasticity. That is, if the plasticity is too high, the fitness of plant species might be reduced sharply under unfavorable environments. Thus, lower plasticity of leaf functional traits may compensate for the negative impact of adverse environments and stabilize leaf construction costs for exotic plants. Moreover, reduced phenotypic plasticity might be one of the key competitive strategies by which exotic plants successfully invade new habitats. Overall, exotic plants did not always exhibit higher values of leaf functional traits or increased phenotypic plasticity of leaf functional traits compared with native species.
文摘Non lubricated slide performance of functional grade copper matrix composite,fabricated using horizontal centrifuge cast technique was investigated using pin-on-disc tribo-tester.Rate of wear and friction coefficient of the inner wall thickness of hollow cylindrical cast specimen was analyzed using Taguchi based L27 orthogonal array,where the percentage of graphite particles were observed higher.Variable process parameters those influenced the rate of wear directly or indirectly were:applied load(15,25 and 35 N),slide velocity(1.5,2.5 and 3.5 m/s)and slide distance(750,1500 and 2250 m).Rate of wear and friction coefficient showed a proportional dependency with applied load and slide distance,whereas showing a decline during intermediate slide velocity.Signal-to-Noise ratio predicted the minimal tribo-condition,on‘smaller-the-better’basis.Analysis of Variance technique quantified the influence of affecting parameters,along with their interactions.Regression analysis was utilized for the validation of the experimental data.Micrographs and scanning electron microscopy exhibited the wear mechanisms and mechanically mixed layer formation during worn surfaces analysis.
基金Project(31300343)supported by the National Natural Science Foundation of ChinaProject supported by Jiangsu Collaborative Innovation Center of Technology and Material of Water Treatment,ChinaProject(12JDG086)supported by Research Foundation for Advanced Talents of Jiangsu University,China
文摘Because co-occurring native and invasive plants are subjected to similar environmental selection pressures,the differences in functional traits and reproductive allocation strategies between native and invasive plants may be closely related to the success of the latter.Accordingly,this study examines differences in functional traits and reproductive allocation strategies between native and invasive plants in Eastern China.Plant height,branch number,reproductive branch number,the belowground-to-aboveground biomass ratio,and the reproductive allocation coefficient of invasive plants were all notably higher than those of native species.Additionally,the specific leaf area(SLA)values of invasive plants were remarkably lower than those of native species.Plasticity indexes of SLA,maximum branch angle,and branch number of invasive plants were each notably lower than those of native species.The reproductive allocation coefficient was positively correlated with reproductive branch number and the belowground-to-aboveground biomass ratio but exhibited negative correlations with SLA and aboveground biomass.Plant height,branch number,reproductive branch number,the belowground-to-aboveground biomass ratio,and the reproductive allocation coefficient of invasive plants may strongly influence the success of their invasions.
基金supported by the National Natural Science Foundation of China(9071602860974106)
文摘The control law design for a near-space hypersonic vehicle(NHV)is highly challenging due to its inherent nonlinearity,plant uncertainties and sensitivity to disturbances.This paper presents a novel functional link network(FLN)control method for an NHV with dynamical thrust and parameter uncertainties.The approach devises a new partially-feedback-functional-link-network(PFFLN)adaptive law and combines it with the nonlinear generalized predictive control(NGPC)algorithm.The PFFLN is employed for approximating uncertainties in flight.Its weights are online tuned based on Lyapunov stability theorem for the first time.The learning process does not need any offline training phase.Additionally,a robust controller with an adaptive gain is designed to offset the approximation error.Finally,simulation results show a satisfactory performance for the NHV attitude tracking,and also illustrate the controller's robustness.
基金We are immensely indebted to the Editor-in-Chief as well as the entire crew of the Editorial Office of Acta Physico-Chimica Sinica for making the Special Issue possible. I am in particular grateful to Dr. Xiaojuan Zhang, the Managing Editor, and Dr. Ying
文摘Chemical concepts such as structure,bonding,reactivity,etc.have been widely used in the literature and text books to appreciate molecular properties and chemical transformations.Even though modern theoretical and computational chemistry is well established from the perspective of accuracy and complexity,how to quantify these concepts is a still unresolved task.Conceptual density functional theory and its related recent developments provide unique opportunities to tackle this problem.In this Special Issue,27 contributions from top investigators over the world are collected to highlight the state-of-art research on this topic,which not only showcases the status of where we are now but also unveils a number to possible future directions to be pursued.
基金Project(2007AA04Z162) supported by the National High-Tech Research and Development Program of ChinaProjects(2006T089, 2009T062) supported by the University Innovation Team in the Educational Department of Liaoning Province, China
文摘In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive functional control(AFPFC) scheme for multivariable nonlinear systems was proposed.Firstly,multivariable nonlinear systems were described based on Takagi-Sugeno(T-S) fuzzy models;assuming that the antecedent parameters of T-S models were kept,the consequent parameters were identified on-line by using the weighted recursive least square(WRLS) method.Secondly,the identified T-S models were linearized to be time-varying state space model at each sampling instant.Finally,by using linear predictive control technique the analysis solution of the optimal control law of AFPFC was established.The application results for pH neutralization process show that the absolute error between the identified T-S model output and the process output is smaller than 0.015;the tracking ability of the proposed AFPFC is superior to that of non-AFPFC(NAFPFC) for pH process without disturbances,the overshoot of the effluent pH value of AFPFC with disturbances is decreased by 50% compared with that of NAFPFC;when the process parameters of AFPFC vary with time the integrated absolute error(IAE) performance index still retains to be less than 200 compared with that of NAFPFC.
文摘Pyrite （FeS2） bulk and （100） surface properties and the oxygen adsorption on the surface were studied by using density functional theory methods. The results show that in the formation of FeS2 （100） surface, there exists a process of electron transfer from Fe dangling bond to S dangling bond. In this situation, surface Fe and S atoms have more ionic properties. Both Fe2+ and S2- have high electrochemistry reduction activity, which is the base for oxygen adsorption. From the viewpoint of adsorption energy, the parallel form oxygen adsorption is in preference. The result also shows that the state of oxygen absorbed on FeS2 surface acts as peroxides rather than O2.
文摘Lithium sulfur(Li/S)is a promising candidate of next generation of rechargeable batteries because of its extremely high specific capacity and abundant natural resources.However,the safety issue might be one of the most important factors which hinder their practical applications.Here a highly effective flame-retarding additive,ethoxypentafluorocyclotriphosphazene(PFPN),is firstly applied in Li/S batteries to improve their thermal safety properties.The addition of about 5%(weight ratio)PFPN makes the highly flammable liquid electrolyte totally nonflammable.Furthermore,the addition of PFPN simultaneously reduces the polarization voltage and obviously enhances the rate capability of sulfur-based composite materials.All these results indicate that PFPN is a favorable flame inhibiting additive in conventional liquid electrolytes for rechargeable lithium sulfur batteries.
