Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-s...Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-site doped Na_(3-2x)Sb_(1-x)W_(x)S_(4-x)F_(x)(x=0,0.12,0.24,0.36)electrolytes through high-energy ball milling followed by high-temperature sintering is prepared,where tungsten(W)substitutes for antimony(Sb)and fluorine(F)replaces sulfur(S)in the NSS lattice.The co-doping of W and F not only broadens the interplanar spacing of NSS but also promotes the stable formation of the cubic phase of NSS,thereby effectively enhancing the transport ability of sodium ions within NSS.Among them,Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24) exhibits the highest ionic conductivity of 4.45 mS·cm^(-1).Furthermore,F doping facilitates the in-situ formation of NaF between the electrolyte and metallic sodium,significantly improving interfacial stability.Electrochemical evaluation shows that the Na/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na symmetric cell achieves a high critical current density of 1.65 mA·cm^(-2) and maintains stable sodium plating/stripping cycling for 500 h at 0.1 mA·cm^(-2).Additionally,the TiS2/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na full cell exhibits outstanding cycling stability and rate capability.展开更多
Silicon-on-insulator (SOI) is well known as "new technology of Si semiconductor IC process in 21 Contrary". Recently, SOI materials have been identified as the first choice of the semiconductor materials for...Silicon-on-insulator (SOI) is well known as "new technology of Si semiconductor IC process in 21 Contrary". Recently, SOI materials have been identified as the first choice of the semiconductor materials for fabricating low voltage and low power circuits. In order to improve the working performance of the SOI circuit under the radiating circumstance, ion implantation of fluorine impurity into the insulator layers in SOI materials is used for hardening the thermal gate oxide layer. Proper implantation depth of fluorine would further improve radiate resistance performance of the SOI circuit. This paper describes the SIMS analysis results of fluorine impurity implantation profile at the interface between top silicon layer and oxide insulator layer.展开更多
For solving the dilemma of the short exothermic life-span of WO_(3)based metastable interstitial composites(MICs)with extensive application prospect,this paper has firstly designed the promising antiwetting Al/WO_(3)M...For solving the dilemma of the short exothermic life-span of WO_(3)based metastable interstitial composites(MICs)with extensive application prospect,this paper has firstly designed the promising antiwetting Al/WO_(3)MICs via electrophoresis assembly of nano-Al and WO_(3)particles fabricated by hydrothermal synthesis method,followed by the subsequent fluorination treatment.A combination of X ray diffraction(XRD),field emission scanning electron microscope(FESEM),energy dispersive X-ray spectroscopy(EDX),and Fourier transform infrared spectroscopy(FT-IR)techniques were utilized in order to characterize the crystal structure,microstructure,and elemental composition distribution of target films after different natural exposure tests.The product with uniform distribution and high purity possesses a high contact angle of~170°and a minute sliding angle of~1°,and displays the outstanding anti-wetting property using droplets with different surface tensions.It also shows great moisture stability in high relative-humidity circumstances after one year of the natural exposure experiment.Notably,the heat output of a fresh sample can reach up to 2.3 kJ/g and retain 96%after the whole exposure test,showing outstanding thermo-stability for at least one year.This work further proposed the mechanism of antiwetting Al/WO_(3)MICs considering the variation tendency of their DSC curve,providing a valuable theoretical reference for designing other self-protected MICs with a long exothermic life-span applied in wide fields of national defense,military industry,etc.展开更多
Pickling sludge generated during the neutralization of pickling wastewater with calcium hydroxide in stainless steel pickling process was characterized using X-ray fluorescence spectrometry, X-ray diffractometry, scan...Pickling sludge generated during the neutralization of pickling wastewater with calcium hydroxide in stainless steel pickling process was characterized using X-ray fluorescence spectrometry, X-ray diffractometry, scanning electron microscopy, thermogravimetry and differential scanning calorimetry, etc. The major compositions of pickling sludge are CaF2, CaSO4, Me（OH）, （M： Fe, Cr, Ni）, and the content of CaF2 is high in the sludge. The melting point of pickling sludge is about 1350℃ and the viscosity is about 0.14 Pa.s at 1450 ℃, which are comparatively lower than those of normal refining slag. After heat treatment, the contents of sulfur and fluorine in the pickling sludge were reduced, confirming the thermal decomposition of sulfate in the sludge. Fluorine in the sludge is reduced by the gaseous SiF4 and A1F3 generated through the reactions of CaF2 with SiO2 and Al2O3. The preliminary results from the reduction test indicate that the sulfur content in the steel is not affected by the presence of sulfur in the sludge. The recovery of nickel is about 40%, and the chromium content changes marginally due to the protective atmosphere under the reduction condition of chromic oxide. The pickling sludge is a potential auxiliary material for the production of stainless steel.展开更多
Mineral compositions and microstructures of fluorine bearing magnetite concentrate and vanadium titanomagnetite concentrate are studied. The results show that a boride and a catalytic oxidation agent have great effect...Mineral compositions and microstructures of fluorine bearing magnetite concentrate and vanadium titanomagnetite concentrate are studied. The results show that a boride and a catalytic oxidation agent have great effects on ameliorating the mineral compositions and microstructures of these sinters, and the catalytic agent is more effective. Comparing these two kinds of ores, the performance of fluorine bearing magnetite concentrate is better. Addition of 0.01% catalyst into fluorine bearing magnetite concentrate can increase calcium ferrite content from 15% 20% up to 34% 39%, and its microstructure changes from large cavities and thin framework into intermediate cavities and thick framework, and the microcracks disappear.展开更多
The chemistry of subsurface water bodies is difficult to understand unless precipitation chemistry and atmospheric processes are taken into consideration. Limited pioneer work has been carried out on considering preci...The chemistry of subsurface water bodies is difficult to understand unless precipitation chemistry and atmospheric processes are taken into consideration. Limited pioneer work has been carried out on considering precipitation chemistry.Polluted zone delineation is very much significant before the planning for any of the remedial measures.The dual contamination is a common problem noticed展开更多
The impact of population pressure has been observed on several systems,groundwater resource is one among them.Mismanagement and over-exploitation has not only caused the decline of groundwater levels but also causes d...The impact of population pressure has been observed on several systems,groundwater resource is one among them.Mismanagement and over-exploitation has not only caused the decline of groundwater levels but also causes deterioration in water quality. Fluoride is one of such parameters where impact of over exploitation has been observed.Fluoride is展开更多
A cross-linkable fluorinated poly (ether ether ketone) (FPEEK) was synthesized for the fabrication of arrayed waveguide grating (AWG) multiplexer. The results of thermal gravimetric analysis (TGA) and near-infrared ab...A cross-linkable fluorinated poly (ether ether ketone) (FPEEK) was synthesized for the fabrication of arrayed waveguide grating (AWG) multiplexer. The results of thermal gravimetric analysis (TGA) and near-infrared absorption spectrum show that the materials have high thermal stability and high optical transparency in the infrared communication region. The refractive index of FPEEK can be controlled easily by changing the fluorine content of the materials. The 32-channel AWG multiplexer is fabricated using the FPEEK and oxygen reactive ion etching technology. The AWG multiplexer exhibits that the insertion loss is from 12.8 to 17.8 dB and the channel crosstalk is less than-20 dB. The wavelength channel spacing and the center wavelength are 0.8nm and 1548nm, respectively.展开更多
文摘Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-site doped Na_(3-2x)Sb_(1-x)W_(x)S_(4-x)F_(x)(x=0,0.12,0.24,0.36)electrolytes through high-energy ball milling followed by high-temperature sintering is prepared,where tungsten(W)substitutes for antimony(Sb)and fluorine(F)replaces sulfur(S)in the NSS lattice.The co-doping of W and F not only broadens the interplanar spacing of NSS but also promotes the stable formation of the cubic phase of NSS,thereby effectively enhancing the transport ability of sodium ions within NSS.Among them,Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24) exhibits the highest ionic conductivity of 4.45 mS·cm^(-1).Furthermore,F doping facilitates the in-situ formation of NaF between the electrolyte and metallic sodium,significantly improving interfacial stability.Electrochemical evaluation shows that the Na/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na symmetric cell achieves a high critical current density of 1.65 mA·cm^(-2) and maintains stable sodium plating/stripping cycling for 500 h at 0.1 mA·cm^(-2).Additionally,the TiS2/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na full cell exhibits outstanding cycling stability and rate capability.
文摘Silicon-on-insulator (SOI) is well known as "new technology of Si semiconductor IC process in 21 Contrary". Recently, SOI materials have been identified as the first choice of the semiconductor materials for fabricating low voltage and low power circuits. In order to improve the working performance of the SOI circuit under the radiating circumstance, ion implantation of fluorine impurity into the insulator layers in SOI materials is used for hardening the thermal gate oxide layer. Proper implantation depth of fluorine would further improve radiate resistance performance of the SOI circuit. This paper describes the SIMS analysis results of fluorine impurity implantation profile at the interface between top silicon layer and oxide insulator layer.
基金funded by the financial support from National Natural Science Foundation of China(Grant No 21805014 and No82102635)Science and Technology Research Project of Chongqing Education Board(Grant No.KJQN201901428)。
文摘For solving the dilemma of the short exothermic life-span of WO_(3)based metastable interstitial composites(MICs)with extensive application prospect,this paper has firstly designed the promising antiwetting Al/WO_(3)MICs via electrophoresis assembly of nano-Al and WO_(3)particles fabricated by hydrothermal synthesis method,followed by the subsequent fluorination treatment.A combination of X ray diffraction(XRD),field emission scanning electron microscope(FESEM),energy dispersive X-ray spectroscopy(EDX),and Fourier transform infrared spectroscopy(FT-IR)techniques were utilized in order to characterize the crystal structure,microstructure,and elemental composition distribution of target films after different natural exposure tests.The product with uniform distribution and high purity possesses a high contact angle of~170°and a minute sliding angle of~1°,and displays the outstanding anti-wetting property using droplets with different surface tensions.It also shows great moisture stability in high relative-humidity circumstances after one year of the natural exposure experiment.Notably,the heat output of a fresh sample can reach up to 2.3 kJ/g and retain 96%after the whole exposure test,showing outstanding thermo-stability for at least one year.This work further proposed the mechanism of antiwetting Al/WO_(3)MICs considering the variation tendency of their DSC curve,providing a valuable theoretical reference for designing other self-protected MICs with a long exothermic life-span applied in wide fields of national defense,military industry,etc.
基金Project(2010JM7010)supported by the Natural Science Foundation of Shaanxi Province,ChinaProject supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education,ChinaProject supported by the Technology Foundation for Selected Overseas Chinese Scholars,Department of Human Resources and Social Security of Shaanxi Province,China
文摘Pickling sludge generated during the neutralization of pickling wastewater with calcium hydroxide in stainless steel pickling process was characterized using X-ray fluorescence spectrometry, X-ray diffractometry, scanning electron microscopy, thermogravimetry and differential scanning calorimetry, etc. The major compositions of pickling sludge are CaF2, CaSO4, Me（OH）, （M： Fe, Cr, Ni）, and the content of CaF2 is high in the sludge. The melting point of pickling sludge is about 1350℃ and the viscosity is about 0.14 Pa.s at 1450 ℃, which are comparatively lower than those of normal refining slag. After heat treatment, the contents of sulfur and fluorine in the pickling sludge were reduced, confirming the thermal decomposition of sulfate in the sludge. Fluorine in the sludge is reduced by the gaseous SiF4 and A1F3 generated through the reactions of CaF2 with SiO2 and Al2O3. The preliminary results from the reduction test indicate that the sulfur content in the steel is not affected by the presence of sulfur in the sludge. The recovery of nickel is about 40%, and the chromium content changes marginally due to the protective atmosphere under the reduction condition of chromic oxide. The pickling sludge is a potential auxiliary material for the production of stainless steel.
文摘Mineral compositions and microstructures of fluorine bearing magnetite concentrate and vanadium titanomagnetite concentrate are studied. The results show that a boride and a catalytic oxidation agent have great effects on ameliorating the mineral compositions and microstructures of these sinters, and the catalytic agent is more effective. Comparing these two kinds of ores, the performance of fluorine bearing magnetite concentrate is better. Addition of 0.01% catalyst into fluorine bearing magnetite concentrate can increase calcium ferrite content from 15% 20% up to 34% 39%, and its microstructure changes from large cavities and thin framework into intermediate cavities and thick framework, and the microcracks disappear.
文摘The chemistry of subsurface water bodies is difficult to understand unless precipitation chemistry and atmospheric processes are taken into consideration. Limited pioneer work has been carried out on considering precipitation chemistry.Polluted zone delineation is very much significant before the planning for any of the remedial measures.The dual contamination is a common problem noticed
文摘The impact of population pressure has been observed on several systems,groundwater resource is one among them.Mismanagement and over-exploitation has not only caused the decline of groundwater levels but also causes deterioration in water quality. Fluoride is one of such parameters where impact of over exploitation has been observed.Fluoride is
文摘A cross-linkable fluorinated poly (ether ether ketone) (FPEEK) was synthesized for the fabrication of arrayed waveguide grating (AWG) multiplexer. The results of thermal gravimetric analysis (TGA) and near-infrared absorption spectrum show that the materials have high thermal stability and high optical transparency in the infrared communication region. The refractive index of FPEEK can be controlled easily by changing the fluorine content of the materials. The 32-channel AWG multiplexer is fabricated using the FPEEK and oxygen reactive ion etching technology. The AWG multiplexer exhibits that the insertion loss is from 12.8 to 17.8 dB and the channel crosstalk is less than-20 dB. The wavelength channel spacing and the center wavelength are 0.8nm and 1548nm, respectively.
