According to the analysis of the turbulent intensity level around the high-speed train, the maximum turbulent intensity ranges from 0.2 to 0.5 which belongs to high turbulent flow. The flow field distribution law was ...According to the analysis of the turbulent intensity level around the high-speed train, the maximum turbulent intensity ranges from 0.2 to 0.5 which belongs to high turbulent flow. The flow field distribution law was studied and eight types of flow regions were proposed. They are high pressure with air stagnant region, pressure decreasing with air accelerating region, low pressure with high air flow velocity region I, turbulent region, steady flow region, low pressure with high air flow velocity region II,pressure increasing with air decelerating region and wake region. The analysis of the vortex structure around the train shows that the vortex is mainly induced by structures with complex mutation and large curvature change. The head and rear of train, the underbody structure, the carriage connection section and the wake region are the main vortex generating sources while the train body with even cross-section has rare vortexes. The wake structure development law studied lays foundation for the train drag reduction.展开更多
The three-dimensional internal flow field of centrifugal pump is complex and variable with design parameters and operation conditions. The post-processing technique named differential amplification method was proposed...The three-dimensional internal flow field of centrifugal pump is complex and variable with design parameters and operation conditions. The post-processing technique named differential amplification method was proposed for the comparison study of different flow structures. The full steady flow fields of an industrial centrifugal pump working on-design and off-design points were numerically investigated by solving Reynolds average Navier-Stokes equations together with a shear-stress transport(SST) k-? turbulence model. And the numerically predicted performance curves of the studied pump agree well with test measurement results. Compared with the flow flied on design point under the help of differential amplification method, the disturbance caused by interaction between blade and volute tongue is very obvious and it extends to the diffuser pipe on the working point with 0.8 times rated flux. While on the point with 1.2 times rated flux, the flow distribution in impeller region is roughly even and it flows more to the bottom section of the diffuser pipe. The above method was proved to be good at displaying the subtle secondary flow structure changes with a higher resolution effect relative to single isolated case observation, which helps the optimization decision-making from multiple design cases.展开更多
Field geological work, field engineering monitoring, laboratory experiments and numerical simulation were used to study the development characteristics of pore-fracture system and hydraulic fracture of No.3 coal reser...Field geological work, field engineering monitoring, laboratory experiments and numerical simulation were used to study the development characteristics of pore-fracture system and hydraulic fracture of No.3 coal reservoir in Southern Qinshui Basin. Flow patterns of methane and water in pore-fracture system and hydraulic fracture were discussed by using limit method and average method. Based on the structure model and flow pattern of post-fracturing high-rank coal reservoir, flow patterns of methane and water were established. Results show that seepage pattern of methane in pore-fracture system is linked with pore diameter, fracture width, coal bed pressure and flow velocity. While in hydraulic fracture, it is controlled by fracture height, pressure and flow velocity. Seepage pattern of water in pore-fracture system is linked with pore diameter, fracture width and flow velocity. While in hydraulic fracture, it is controlled by fracture height and flow velocity. Pores and fractures in different sizes are linked up by ultramicroscopic fissures, micro-fissures and hydraulic fracture. In post-fracturing high-rank coal reservoir, methane has level-three flow and gets through triple medium to the wellbore; and water passes mainly through double medium to the wellbore which is level-two flow.展开更多
The paper studies on the sediment-laden flow by using MicroADV.Laboratory calibration has been conducted to determine the relationship between backscattered signal strength and sediment concentration. Based on the exp...The paper studies on the sediment-laden flow by using MicroADV.Laboratory calibration has been conducted to determine the relationship between backscattered signal strength and sediment concentration. Based on the experimental data,the interactions between sediment and fluid in open channel flow are investi- gated.The experiment shows that there exist inner relation between sediment concentration and turbulence, and the relationship is distinctry related to the diameter of particle as well as the flow co...展开更多
In this paper,Brazilian test was performed on disk samples of analogue materials with defined structural planes.The surface strain evolution process of the disk samples during loading was analyzed via digital image co...In this paper,Brazilian test was performed on disk samples of analogue materials with defined structural planes.The surface strain evolution process of the disk samples during loading was analyzed via digital image correlation.The damage evolution process was explored from a microscopic perspective by combining discrete element numerical simulation technology.The criterion of the failure mode of the disc specimen in the split state was theoretically deduced.The influence of structural surface roughness and loading inclination angle on the stress state at the center of the specimen was explored.The results showed that the failure modes of the samples could be divided into three typical modes as matrix failure,structural plane failure and combination failure.The rough structural plane improves the failure strength of the specimen by limiting its lateral deformation,and the degree of improvement weakens continuously with the increase of the inclination angle of the structural plane.As the inclination angle of the structural plane increases,the main type of microcracks in the structural plane changes from shear microcracks to tensile microcracks.This study contributes to a better understanding of macro-and meso-failure characteristics of rock masses with structural planes under a splitting state.展开更多
基金Project(U1134203)supported by the National Natural Science Foundation of China
文摘According to the analysis of the turbulent intensity level around the high-speed train, the maximum turbulent intensity ranges from 0.2 to 0.5 which belongs to high turbulent flow. The flow field distribution law was studied and eight types of flow regions were proposed. They are high pressure with air stagnant region, pressure decreasing with air accelerating region, low pressure with high air flow velocity region I, turbulent region, steady flow region, low pressure with high air flow velocity region II,pressure increasing with air decelerating region and wake region. The analysis of the vortex structure around the train shows that the vortex is mainly induced by structures with complex mutation and large curvature change. The head and rear of train, the underbody structure, the carriage connection section and the wake region are the main vortex generating sources while the train body with even cross-section has rare vortexes. The wake structure development law studied lays foundation for the train drag reduction.
基金Project(2014GK3150)supported by Science and Technology Plan of Hunan Province,China
文摘The three-dimensional internal flow field of centrifugal pump is complex and variable with design parameters and operation conditions. The post-processing technique named differential amplification method was proposed for the comparison study of different flow structures. The full steady flow fields of an industrial centrifugal pump working on-design and off-design points were numerically investigated by solving Reynolds average Navier-Stokes equations together with a shear-stress transport(SST) k-? turbulence model. And the numerically predicted performance curves of the studied pump agree well with test measurement results. Compared with the flow flied on design point under the help of differential amplification method, the disturbance caused by interaction between blade and volute tongue is very obvious and it extends to the diffuser pipe on the working point with 0.8 times rated flux. While on the point with 1.2 times rated flux, the flow distribution in impeller region is roughly even and it flows more to the bottom section of the diffuser pipe. The above method was proved to be good at displaying the subtle secondary flow structure changes with a higher resolution effect relative to single isolated case observation, which helps the optimization decision-making from multiple design cases.
基金Projects(41330638,41272154)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD),ChinaProject(2014M551705)supported by the China Postdoctoral Science Foundation
文摘Field geological work, field engineering monitoring, laboratory experiments and numerical simulation were used to study the development characteristics of pore-fracture system and hydraulic fracture of No.3 coal reservoir in Southern Qinshui Basin. Flow patterns of methane and water in pore-fracture system and hydraulic fracture were discussed by using limit method and average method. Based on the structure model and flow pattern of post-fracturing high-rank coal reservoir, flow patterns of methane and water were established. Results show that seepage pattern of methane in pore-fracture system is linked with pore diameter, fracture width, coal bed pressure and flow velocity. While in hydraulic fracture, it is controlled by fracture height, pressure and flow velocity. Seepage pattern of water in pore-fracture system is linked with pore diameter, fracture width and flow velocity. While in hydraulic fracture, it is controlled by fracture height and flow velocity. Pores and fractures in different sizes are linked up by ultramicroscopic fissures, micro-fissures and hydraulic fracture. In post-fracturing high-rank coal reservoir, methane has level-three flow and gets through triple medium to the wellbore; and water passes mainly through double medium to the wellbore which is level-two flow.
基金Supported by National Key Basic Research and Development Program(973 Program)(2003CB415205)the National Natural Science Foundation of China and the Research Fund for the Doctoral Program of Higher Education of the Ministry of Education of China
文摘The paper studies on the sediment-laden flow by using MicroADV.Laboratory calibration has been conducted to determine the relationship between backscattered signal strength and sediment concentration. Based on the experimental data,the interactions between sediment and fluid in open channel flow are investi- gated.The experiment shows that there exist inner relation between sediment concentration and turbulence, and the relationship is distinctry related to the diameter of particle as well as the flow co...
基金Project(52274148)supported by the National Natural Science Foundation of ChinaProject(2022XJLJ01)supported by the Fundamental Research Funds for the Central Universities,China。
文摘In this paper,Brazilian test was performed on disk samples of analogue materials with defined structural planes.The surface strain evolution process of the disk samples during loading was analyzed via digital image correlation.The damage evolution process was explored from a microscopic perspective by combining discrete element numerical simulation technology.The criterion of the failure mode of the disc specimen in the split state was theoretically deduced.The influence of structural surface roughness and loading inclination angle on the stress state at the center of the specimen was explored.The results showed that the failure modes of the samples could be divided into three typical modes as matrix failure,structural plane failure and combination failure.The rough structural plane improves the failure strength of the specimen by limiting its lateral deformation,and the degree of improvement weakens continuously with the increase of the inclination angle of the structural plane.As the inclination angle of the structural plane increases,the main type of microcracks in the structural plane changes from shear microcracks to tensile microcracks.This study contributes to a better understanding of macro-and meso-failure characteristics of rock masses with structural planes under a splitting state.
