This work investigated the microstructure,magnetic properties,and crystallization kinetics of the as-spun and annealed alloy ribbons of(Fe_(40-x)Co_xNi_(40)Si_(6.33)B_(12.66)Cu_1)_(0.97)Nb_(0.03),where x=0,6,7,8,9,pre...This work investigated the microstructure,magnetic properties,and crystallization kinetics of the as-spun and annealed alloy ribbons of(Fe_(40-x)Co_xNi_(40)Si_(6.33)B_(12.66)Cu_1)_(0.97)Nb_(0.03),where x=0,6,7,8,9,prepared using the meltspinning method.The results show that adding a moderate amount of Co can improve the glass forming ability(GFA),the first peak crystallization temperature,and thermal stability of the as-spun alloy ribbons.With x=7,the two-stage crystallization temperature interval△Tx=90 exhibits optimal thermal stability,and the alloy annealed at 673 K for 10 minutes shows the favorable combined magnetic properties,with H_(c)=0.12 A/m,M_(s)=88.7 A·m^(2)/kg,andμ_(e)=13800.The magnetic domain results show that annealing removes numerous pinning points in the magnetic domains of the alloy ribbons,making the domain walls smoother and effectively reducing the pinning effect.展开更多
Effects of alloying processing on tensile test properties of Fe 3Al based alloys have been studied. Results show that microalloying of cerium is very effective on increasing the room temperature ductility of Fe 3Al...Effects of alloying processing on tensile test properties of Fe 3Al based alloys have been studied. Results show that microalloying of cerium is very effective on increasing the room temperature ductility of Fe 3Al based alloys. Surface analysis by XPS demonstrates that cerium addition causes the change in the oxide chemistry and provides rapid passivation of the specimen surface. The high temperature strength and creep resistance of Fe 3Al based alloys can be significantly enhanced by alloying additions of tungsten, niobium or molybdenum, especially when combined additions of tungsten with niobium or molybdenum are used. The additions of tungsten, niobium or molybdenum also result in the significant microstructural refinement and the formation of fine precipitates which are identified as M 6C type carbide in the alloys containing tungsten.展开更多
The short-range repulsive interactions of any force field must be modified to be applicable for high energy atomic collisions because of extremely far from equilibrium state when used in molecular dynamics(MD)simulati...The short-range repulsive interactions of any force field must be modified to be applicable for high energy atomic collisions because of extremely far from equilibrium state when used in molecular dynamics(MD)simulations.In this work,the short-range repulsive interaction of a reactive force field(ReaxFF),describing Fe-Ni-Al alloy system,is well modified by adding a tabulated function form based on Ziegler-Biersack-Littmark(ZBL)potential.The modified interaction covers three ranges,including short range,smooth range,and primordial range.The short range is totally predominated by ZBL potential.The primordial range means the interactions in this range is the as-is ReaxFF with no changes.The smooth range links the short-range ZBL and primordial-range ReaxFF potentials with a taper function.Both energies and forces are guaranteed to be continuous,and qualified to the consistent requirement in LAMMPS.This modified force field is applicable for simulations of energetic particle bombardments and reproducing point defects'booming and recombination effectively.展开更多
A novel design of micro-aluminum(μAl)powder coated with bi-/tri-component alloy layer,such as:Ni-P and Ni-P-Cu(namely,Al@Ni-P,Al@Ni-P-Cu,respectively),as combustion catalysts,were introduced to release its huge energ...A novel design of micro-aluminum(μAl)powder coated with bi-/tri-component alloy layer,such as:Ni-P and Ni-P-Cu(namely,Al@Ni-P,Al@Ni-P-Cu,respectively),as combustion catalysts,were introduced to release its huge energy inside Al-core and promote rapid pyrolysis of ammonium perchlorate(AP)at a lower temperature in aluminized propellants.The microstructure of Al@Ni-P-Cu demonstrates that a three-layer Ni-P-Cu shell,with the thickness of~100 nm,is uniformly supported byμAl carrier(fuel unit),which has an amorphous surface with a thickness of~2.3 nm(catalytic unit).The peak temperature of AP with the addition of Al@Ni-P-Cu(3.5%)could significantly drop to 316.2℃ at high-temperature thermal decomposition,reduced by 124.3℃,in comparison to that of pure AP with 440.5℃.It illustrated that the introduction of Al@Ni-P-Cu could weaken or even eliminate the obstacle of AP pyrolysis due to its reduction of activation energy with 118.28 kJ/mol.The laser ignition results showed that the ignition delay time of Al@Ni-P-Cu/AP mixture with 78 ms in air is shorter than that of Al@Ni-P/AP(118 ms),decreased by 33.90%.Those astonishing breakthroughs were attributed to the synergistic effects of adequate active sites on amorphous surface and oxidation exothermic reactions(7597.7 J/g)of Al@Ni-P-Cu,resulting in accelerated mass and/or heat transfer rate to catalyze AP pyrolysis and combustion.Moreover,it is believed to provide an alternative Al-based combustion catalyst for propellant designer,to promote the development the propellants toward a higher energy.展开更多
AA2219 Ale Cu alloy is widely used in defence and aerospace applications due to required combination of high strength-to-weight ratio and toughness.Fabrication of components used for defence always involves welding.Ev...AA2219 Ale Cu alloy is widely used in defence and aerospace applications due to required combination of high strength-to-weight ratio and toughness.Fabrication of components used for defence always involves welding.Even though the mechanical properties of the base metal are better,but the alloy suffers from poor mechanical and corrosion properties during fusion welding.To overcome the problems of fusion welding,friction stir welding(FSW) is recognized as an alternative solid state joining method aimed to improve the mechanical and corrosion properties.Tool profile is one of the important variables which affect the performance of the friction stir weld.In the present work the effect of tool profile on the microstructure and pitting corrosion of AA2219 aluminiumecopper alloy was studied.Electron backscattered diffraction results established that the grain size and orientation of weld nugget of triangle profile is finer than that of conical profile.Differential scanning calorimetric results show the evidence of precipitate dissolution during FSW.It was found that the microstructure changes,such as grain size and its orientation precipitate dissolution during FSW influence the hardness and corrosion behaviour.Pitting corrosion resistance of friction stir welds of AA2219 was found to be better for triangle profile tool compared to conical profile which is attributed to material flow and strengthening precipitate morphology in various zones.Higher amount of heat generation during FSW made using triangle profile tool may be the reason for greater dissolution of strengthening precipitates in nugget zone and coarsening in thermo mechanically affected zone(TMAZ) and heat affected zone(HAZ).展开更多
Tb0.3Dy0.TFe1.95 alloys are solidified under various high magnetic field conditions. The influence of a high magnetic field on the crystal orientation, morphology and magnetostriction of the alloys are studied. The re...Tb0.3Dy0.TFe1.95 alloys are solidified under various high magnetic field conditions. The influence of a high magnetic field on the crystal orientation, morphology and magnetostriction of the alloys are studied. The results show that with the increase of magnetic flux density, the crystal orientation of the （Tb,Dy）Fe2 phase changed from （113） to （111） direction; the grains in the alloys tended to align along the magnetic field direction; and the magnetostriction of Tb0.3Dy0.7Fe1.95 alloys is remarkably improved. The change in magnetostriction of Tb0.3Dy0.TFe1.95 alloys is linked to the amount and the crystal orientation behavior of the （Tb,Dy）Fe2 phase.展开更多
The early aging Cu precipitations in Fe-3%Cu and Fe-3%Cu-4%Ni ternary alloys are investigated by molecular dynamics （MD） simulations. The results show that the average size of Cu clusters in Fe-3%Cu-4%Ni alloy is la...The early aging Cu precipitations in Fe-3%Cu and Fe-3%Cu-4%Ni ternary alloys are investigated by molecular dynamics （MD） simulations. The results show that the average size of Cu clusters in Fe-3%Cu-4%Ni alloy is larger than that in Fe-3%Cu alloy. The diffusion of Cu is accelerated by Ni according to the mean square displacement （MSD）. Furthermore, the whole formation process of Cu-rich clusters is analyzed in detail, and it is found that the presence of Ni promotes small Cu-rich clusters to be combined into big ones. Ni atoms prefer to stay at the combination positions of small clusters energetically due to a large number of the first nearest neighbor Cu-Ni interactions, which is verified by first-principles calculations based on density functional theory （DFT）.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.52275567)the Key Research and Development Program of Shanxi Province,China(Grant No.202202050201020)+3 种基金the Doctoral Starting-up Foundation of Taiyuan University of Science and Technology(Grant No.20192016)the Research Project Supported by Shanxi Scholarship Council(Grant No.2017-085)the Graduate Education and Teaching Reform Project of Shanxi Province,China(Grant No.2023JG136)the Special Fund for Science and Technology Innovation Teams of Shanxi Province,China(Grant No.202304051001036)。
文摘This work investigated the microstructure,magnetic properties,and crystallization kinetics of the as-spun and annealed alloy ribbons of(Fe_(40-x)Co_xNi_(40)Si_(6.33)B_(12.66)Cu_1)_(0.97)Nb_(0.03),where x=0,6,7,8,9,prepared using the meltspinning method.The results show that adding a moderate amount of Co can improve the glass forming ability(GFA),the first peak crystallization temperature,and thermal stability of the as-spun alloy ribbons.With x=7,the two-stage crystallization temperature interval△Tx=90 exhibits optimal thermal stability,and the alloy annealed at 673 K for 10 minutes shows the favorable combined magnetic properties,with H_(c)=0.12 A/m,M_(s)=88.7 A·m^(2)/kg,andμ_(e)=13800.The magnetic domain results show that annealing removes numerous pinning points in the magnetic domains of the alloy ribbons,making the domain walls smoother and effectively reducing the pinning effect.
文摘Effects of alloying processing on tensile test properties of Fe 3Al based alloys have been studied. Results show that microalloying of cerium is very effective on increasing the room temperature ductility of Fe 3Al based alloys. Surface analysis by XPS demonstrates that cerium addition causes the change in the oxide chemistry and provides rapid passivation of the specimen surface. The high temperature strength and creep resistance of Fe 3Al based alloys can be significantly enhanced by alloying additions of tungsten, niobium or molybdenum, especially when combined additions of tungsten with niobium or molybdenum are used. The additions of tungsten, niobium or molybdenum also result in the significant microstructural refinement and the formation of fine precipitates which are identified as M 6C type carbide in the alloys containing tungsten.
基金Project supported by the National Magnetic Confinement Fusion Energy Research Project(Grant Nos.2019YFE03120003,2018YFE0307100,and 2017YFE0302500)the National Natural Science Foundation of China(Grant Nos.11975034,11921006,12004010,and U20B2025).
文摘The short-range repulsive interactions of any force field must be modified to be applicable for high energy atomic collisions because of extremely far from equilibrium state when used in molecular dynamics(MD)simulations.In this work,the short-range repulsive interaction of a reactive force field(ReaxFF),describing Fe-Ni-Al alloy system,is well modified by adding a tabulated function form based on Ziegler-Biersack-Littmark(ZBL)potential.The modified interaction covers three ranges,including short range,smooth range,and primordial range.The short range is totally predominated by ZBL potential.The primordial range means the interactions in this range is the as-is ReaxFF with no changes.The smooth range links the short-range ZBL and primordial-range ReaxFF potentials with a taper function.Both energies and forces are guaranteed to be continuous,and qualified to the consistent requirement in LAMMPS.This modified force field is applicable for simulations of energetic particle bombardments and reproducing point defects'booming and recombination effectively.
基金supported by the National Natural Science Foundation of China,China(Grant Nos.U20B2018,U21B2086,11972087)。
文摘A novel design of micro-aluminum(μAl)powder coated with bi-/tri-component alloy layer,such as:Ni-P and Ni-P-Cu(namely,Al@Ni-P,Al@Ni-P-Cu,respectively),as combustion catalysts,were introduced to release its huge energy inside Al-core and promote rapid pyrolysis of ammonium perchlorate(AP)at a lower temperature in aluminized propellants.The microstructure of Al@Ni-P-Cu demonstrates that a three-layer Ni-P-Cu shell,with the thickness of~100 nm,is uniformly supported byμAl carrier(fuel unit),which has an amorphous surface with a thickness of~2.3 nm(catalytic unit).The peak temperature of AP with the addition of Al@Ni-P-Cu(3.5%)could significantly drop to 316.2℃ at high-temperature thermal decomposition,reduced by 124.3℃,in comparison to that of pure AP with 440.5℃.It illustrated that the introduction of Al@Ni-P-Cu could weaken or even eliminate the obstacle of AP pyrolysis due to its reduction of activation energy with 118.28 kJ/mol.The laser ignition results showed that the ignition delay time of Al@Ni-P-Cu/AP mixture with 78 ms in air is shorter than that of Al@Ni-P/AP(118 ms),decreased by 33.90%.Those astonishing breakthroughs were attributed to the synergistic effects of adequate active sites on amorphous surface and oxidation exothermic reactions(7597.7 J/g)of Al@Ni-P-Cu,resulting in accelerated mass and/or heat transfer rate to catalyze AP pyrolysis and combustion.Moreover,it is believed to provide an alternative Al-based combustion catalyst for propellant designer,to promote the development the propellants toward a higher energy.
文摘AA2219 Ale Cu alloy is widely used in defence and aerospace applications due to required combination of high strength-to-weight ratio and toughness.Fabrication of components used for defence always involves welding.Even though the mechanical properties of the base metal are better,but the alloy suffers from poor mechanical and corrosion properties during fusion welding.To overcome the problems of fusion welding,friction stir welding(FSW) is recognized as an alternative solid state joining method aimed to improve the mechanical and corrosion properties.Tool profile is one of the important variables which affect the performance of the friction stir weld.In the present work the effect of tool profile on the microstructure and pitting corrosion of AA2219 aluminiumecopper alloy was studied.Electron backscattered diffraction results established that the grain size and orientation of weld nugget of triangle profile is finer than that of conical profile.Differential scanning calorimetric results show the evidence of precipitate dissolution during FSW.It was found that the microstructure changes,such as grain size and its orientation precipitate dissolution during FSW influence the hardness and corrosion behaviour.Pitting corrosion resistance of friction stir welds of AA2219 was found to be better for triangle profile tool compared to conical profile which is attributed to material flow and strengthening precipitate morphology in various zones.Higher amount of heat generation during FSW made using triangle profile tool may be the reason for greater dissolution of strengthening precipitates in nugget zone and coarsening in thermo mechanically affected zone(TMAZ) and heat affected zone(HAZ).
基金Supported by the National Natural Science Foundation of China under Grant Nos 51425401 and 51271056the Fundamental Research Funds for the Central Universities under Grant Nos N140901001 and N140902001the Doctoral Scientific Research Foundation of Liaoning Province under Grant No 20131034
文摘Tb0.3Dy0.TFe1.95 alloys are solidified under various high magnetic field conditions. The influence of a high magnetic field on the crystal orientation, morphology and magnetostriction of the alloys are studied. The results show that with the increase of magnetic flux density, the crystal orientation of the （Tb,Dy）Fe2 phase changed from （113） to （111） direction; the grains in the alloys tended to align along the magnetic field direction; and the magnetostriction of Tb0.3Dy0.7Fe1.95 alloys is remarkably improved. The change in magnetostriction of Tb0.3Dy0.TFe1.95 alloys is linked to the amount and the crystal orientation behavior of the （Tb,Dy）Fe2 phase.
基金supported by the National Natural Science Foundation of China(Grant Nos.50931003 and 51301102)the 085 Project at Shanghai University,China.
文摘The early aging Cu precipitations in Fe-3%Cu and Fe-3%Cu-4%Ni ternary alloys are investigated by molecular dynamics （MD） simulations. The results show that the average size of Cu clusters in Fe-3%Cu-4%Ni alloy is larger than that in Fe-3%Cu alloy. The diffusion of Cu is accelerated by Ni according to the mean square displacement （MSD）. Furthermore, the whole formation process of Cu-rich clusters is analyzed in detail, and it is found that the presence of Ni promotes small Cu-rich clusters to be combined into big ones. Ni atoms prefer to stay at the combination positions of small clusters energetically due to a large number of the first nearest neighbor Cu-Ni interactions, which is verified by first-principles calculations based on density functional theory （DFT）.
