Taking advantage of the extremely small size of the gold nanodisk electrode,the single hydrogen nanobubble generated on the surface of the nanoelectrode was studied to evaluate its hydrogen evolution performance.It wa...Taking advantage of the extremely small size of the gold nanodisk electrode,the single hydrogen nanobubble generated on the surface of the nanoelectrode was studied to evaluate its hydrogen evolution performance.It was found that compared with the bare gold nanodisk electrode,the bubble formation potential of the gold nanodisk electrode modified with tungsten disulfide quantum dots(WS_(2)QDs)on the surface was more positive,indicating that its hydrogen evolution activity was higher.Microdynamic model analysis shows that the average standard rate constant of the rate-determining step of the hydrogen evolution reaction of gold nanoelectrodes modified with WS_(2)QDs is approximately 12 times larger than that of gold nanoelectrodes.This work based on the formation of nanobubbles provides new ideas for the design and performance evaluation of hydrogen evolution reaction catalysts.展开更多
Sulfur-doped iron-cobalt tannate nanorods(S-FeCoTA)derived from metal-organic frameworks(MOFs)as electrocatalysts were synthesized via a one-step hydrothermal method.The optimized S-FeCoTA was interlaced by loose nano...Sulfur-doped iron-cobalt tannate nanorods(S-FeCoTA)derived from metal-organic frameworks(MOFs)as electrocatalysts were synthesized via a one-step hydrothermal method.The optimized S-FeCoTA was interlaced by loose nanorods,which had many voids.The S-FeCoTA catalysts exhibited excellent electrochemical oxygen evolution reaction(OER)performance with a low overpotential of 273 mV at 10 mA·cm^(-2)and a small Tafel slope of 36 mV·dec^(-1)in 1 mol·L^(-1)KOH.The potential remained at 1.48 V(vs RHE)at 10 mA·cm^(-2)under continuous testing for 15 h,implying that S-FeCoTA had good stability.The Faraday efficiency of S-FeCoTA was 94%.The outstanding OER activity of S-FeCoTA is attributed to the synergistic effects among S,Fe,and Co,thus promoting electron transfer,reducing the reaction kinetic barrier,and enhancing the OER performance.展开更多
Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction(ORR).Atomic ordered intermetallic compounds(IMC)provide unique electronic and geometri...Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction(ORR).Atomic ordered intermetallic compounds(IMC)provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms,thus exhibiting superior electrocata-lytic activity and durability.However,quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging.Herein,a series of ternary Pt_(2)NiCo interme-tallic catalysts(o-Pt_(2)NiCo)with different ordering degree were synthesized by annealing temperature modulation.Among them,the o-Pt_(2)NiCo which annealed at 800℃for two hours exhibits the highest ordering degree and the optimal ORR ac-tivity,which the mass activity of o-Pt_(2)NiCo is 1.8 times and 2.8 times higher than that of disordered Pt_(2)NiCo alloy and Pt/C.Furthermore,the o-Pt_(2)NiCo still maintains 70.8%mass activity after 30,000 potential cycles.Additionally,the ORR activity test results for Pt_(2)NiCo IMC with different ordering degree also provide a positive correlation between the ordering degree and ORR activity.This work provides a prospective design direction for ternary Pt-based electrocatalysts.展开更多
Direct ethanol fuel cells(DEFCs)are a promising alternative to conventional energy sources,offering high energy density,environmental sustainability,and operational safety.Compared to methanol fuel cells,DEFCs exhibit...Direct ethanol fuel cells(DEFCs)are a promising alternative to conventional energy sources,offering high energy density,environmental sustainability,and operational safety.Compared to methanol fuel cells,DEFCs exhibit lower toxicity and a more mature preparation process.Unlike hydrogen fuel cells,DEFCs provide superior storage and transport feasibility,as well as cost-effectiveness,significantly enhancing their commercial viability.However,the stable C-C bond in ethanol creates a high activation energy barrier,often resulting in incomplete electrooxidation.Current commercial platinum(Pt)-and palladium(Pd)-based catalysts demonstrate low C-C bond cleavage efficiency(<7.5%),severely limiting DEFC energy output and power density.Furthermore,high catalyst costs and insufficient activity impede large-scale commercialization.Recent advances in DEFC anode catalyst design have focused on optimizing material composition and elucidating catalytic mechanisms.This review systematically examines developments in ethanol electrooxidation catalysts over the past five years,highlighting strategies to improve C1 pathway selectivity and C-C bond activation.Key approaches,such as alloying,nanostructure engineering,and interfacial synergy effects,are discussed alongside their mechanistic implications.Finally,we outline current challenges and future prospects for DEFC commercialization.展开更多
The poor electronic conductivity of metal-organic framework(MOF)materials hinders their direct application in the field of electrocatalysis in fuel cells.Herein,we proposed a strategy of embedding carbon nanotubes(CNT...The poor electronic conductivity of metal-organic framework(MOF)materials hinders their direct application in the field of electrocatalysis in fuel cells.Herein,we proposed a strategy of embedding carbon nanotubes(CNTs)during the growth process of MOF crystals,synthesizing a metalloporphyrin-based MOF catalyst TCPPCo-MOF-CNT with a unique CNT-intercalated MOF structure.Physical characterization revealed that the CNTs enhance the overall conductivity while retaining the original characteristics of the MOF and metalloporphyrin.Simultaneously,the insertion of CNTs generated adequate mesopores and created a hierarchical porous structure that enhances mass transfer efficiency.X-ray photoelectron spectroscopic analysis confirmed that the C atom in CNT changed the electron cloud density on the catalytic active center Co,optimizing the electronic structure.Consequently,the E_(1/2) of the TCPPCo-MOF-CNT catalyst under neutral conditions reached 0.77 V(vs.RHE),outperforming the catalyst without CNTs.When the TCPPCo-MOF-CNT was employed as the cathode catalyst in assembling microbial fuel cells(MFCs)with Nafion-117 as the proton exchange membrane,the maxi-mum power density of MFCs reached approximately 500 mW·m^(-2).展开更多
The utilization of nickel-based catalysts as alternatives to expensive platinum-based(Pt-based)materials for the hydrogen evolution reaction in acidic electrolytes has attracted considerable attention due to their pot...The utilization of nickel-based catalysts as alternatives to expensive platinum-based(Pt-based)materials for the hydrogen evolution reaction in acidic electrolytes has attracted considerable attention due to their potential for enabling cost-effective industrial applications.However,the unsatisfied cyclic stability and electrochemical activity limit their further application.In this work,nickel-molybdenum(Ni-Mo)alloy catalysts were successfully synthesized through a comprehensive process including electrodeposition,thermal annealing,and electrochemical activation.Owing to the synergistic interaction of molybdenum trinickelide(Ni_(3)Mo)and molybdenum dioxide(MoO_(2))in Ni-Mo alloy,the catalyst display superior overall electrochemical properties.A low overpotential of 86 mV at 10 mA/cm^(2)and a Tafel slope of 74.0 mV/dec in 0.5 mol/L H_(2)SO_(4)solution can be achieved.Notably,remarkable stability with negligible performance degradation even after 100 h could be maintained.This work presents a novel and effective strategy for the design and fabrication of high-performance,non-precious metal electrocatalysts for acidic water electrolysis.展开更多
Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-inten...Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separat-ing mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO_(2) capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, along with case studies on the implementation of tandem electrolysis. In comparison to conventional H-type cell, flow cell and membrane electrode assembly cell reactors, SSE reactors incorporate gas diffusion electrodes and utilize a solid electro-lyte layer positioned between an anion exchange membrane (AEM) and a cation exchange membrane (CEM). A key inno-vation of this design is the sandwiched SSE layer, which enhances efficient ion transport and facilitates continuous product extraction through a stream of deionized water or humidified nitrogen, effectively separating ion conduction from product collection. During electrolysis, driven by an electric field and concentration gradient, electrochemically generated ions (e.g., HCOO- and CH3COO-) migrate through the AEM into the SSE layer, while protons produced from water oxidation at the anode traverse the CEM into the central chamber to maintain charge balance. Targeted products like HCOOH can form in the middle layer through ionic recombination and are efficiently carried away by the flowing medium through the porous SSE layer, in the absence of electrolyte salt impurities. As CO_(2)RR can generate a series of liquid products, advancements in catalyst discovery over the past several years have facilitated the industrial application of SSE for more efficient chemicals production. Also noteworthy, the cathode reduction reaction can readily consume protons from water, creating a highly al-kaline local environment. SSE reactors are thereby employed to capture acidic CO_(2), forming CO_(3)^(2-) from various gas sources including flue gases. Driven by the electric field, the formed CO_(3)^(2-) can traverse through the AEM and react with protons originating from the anode, thereby regenerating CO_(2). This CO_(2) can then be collected and utilized as a low-cost feedstock for downstream CO_(2) electrolysis. Based on this principle, several cell configurations have been proposed to enhance CO_(2) capture from diverse gas sources. Through the collaboration of two SSE units, tandem electrochemical CO_(2) capture and con-version has been successfully implemented. Finally, we offer insights into the future development of SSE reactors for prac-tical applications aimed at achieving carbon neutrality. We recommend that greater attention be focused on specific aspects, including the fundamental physicochemical properties of the SSE layer, the electrochemical engineering perspective related to ion and species fluxes and selectivity, and the systematic pairing of consecutive CO_(2) capture and conversion units. These efforts aim to further enhance the practical application of SSE reactors within the broader electrochemistry community.展开更多
The development of highly active catalyst in pH-neutral media for oxygen evolution reaction(OER)is critical in the field of renewable energy storage and conversion.Nevertheless,the slow kinetics of proton-coupled elec...The development of highly active catalyst in pH-neutral media for oxygen evolution reaction(OER)is critical in the field of renewable energy storage and conversion.Nevertheless,the slow kinetics of proton-coupled electron transfer(PCET)hinders the overall OER efficiency.Herein,we report an ionic liquid(IL)modified CoSn(OH)_(6)nanocubes(denoted as CoS-n(OH)_(6)-IL),which could be prepared through a facile strategy.The modified IL would not change the structural character-istics of CoSn(OH)_(6),but could effectively regulate the local proton activity near the active sites.The CoSn(OH)_(6)-IL exhibited higher intrinsic OER performances than the pristine CoSn(OH)_(6)in neutral media.For example,the current density of CoS-n(OH)_(6)-IL at 1.8 V versus reversible hydrogen electrode(RHE)was about 4 times higher than that of CoSn(OH)_(6).According to the pH-dependent kinetic investigations,operando electrochemical impedance spectroscopic,chemical probe tests,and deuterium kinetic isotope effects,the interfacial layer of IL could be utilized as a proton transfer mediator to promote the proton transfer,which enhances the surface coverage of OER intermediates and reduces the activation barrier.Consequent-ly,the sluggish OER kinetics would be efficiently accelerated.This study provides a facile and effective strategy to facilitate the PCET processes and is beneficial to guide the rational design of OER electrocatalysts.展开更多
Electrocatalytic carbon dioxide(CO_(2))reduction is an important way to achieve carbon neutrality by converting CO_(2)in-to high-value-added chemicals using electric energy.Carbon-based materials are widely used in va...Electrocatalytic carbon dioxide(CO_(2))reduction is an important way to achieve carbon neutrality by converting CO_(2)in-to high-value-added chemicals using electric energy.Carbon-based materials are widely used in various electrochemical reactions,including electrocatalytic CO_(2)reduction,due to their low cost and high activity.In recent years,defect engineering has attracted wide attention by constructing asymmetric defect centers in the materials,which can optimize the physicochemical properties of the mater-ial and improve its electrocatalytic activity.This review summarizes the types,methods of formation and defect characterization tech-niques of defective carbon-based materials.The advantages of defect engineering and the advantages and disadvantages of various defect formation methods and characterization techniques are also evaluated.Finally,the challenges of using defective carbon-based materials in electrocatalytic CO_(2)reduction are investigated and opportunities for their use are discussed.It is believed that this re-view will provide suggestions and guidance for developing defective carbon-based materials for CO_(2)reduction.展开更多
Non-precious electro catalysts with high-efficiency, cheapness and stablility are of great significance to replace noble metal electro catalysts in the hydrogen evolution reaction(HER) and oxygen evolution reaction(OE...Non-precious electro catalysts with high-efficiency, cheapness and stablility are of great significance to replace noble metal electro catalysts in the hydrogen evolution reaction(HER) and oxygen evolution reaction(OER). In this work, triangular Cu@CuO nanorods on Cu nanosheets were fabricated by a novel in-situ oxidation approach using Cu nanosheets as self-template and conductive nano-substrate in an aqueous solution of NaOH/H2O2, and then by lowtemperature phosphorization treatments. The experimental results show that the phosphating temperature has a significant effect on the morphology, composition and number of active sites of Cu@Cu_(3)P nanorods. The Cu@Cu_(3)P-280 electrode exhibits a good HER catalytic activity of achieving a current density of 10 mA/cm^(2) at 252 mV in acid electrolyte. After catalysis for 14 h, the current density can still reach 72% of the initial value. Moreover, the Cu@Cu_(3)P-280 electrode also shows an excellent OER catalytic activity in basic electrolyte, reaching a current density of 10 mA/cm^(2) at the overpotential value of 200 mV. After catalysis for 12 h, the current density remained more than 93% of the initial value. This work provides a theoretical basis for the directional design and preparation of sustainable, low-cost, bifunctional electrocatalytic materials.展开更多
Developing cost-effective electrocatalysts for oxygen evolution reaction (OER) in basic media is critical to hydrogen production from renewable energy. Herein, in-situ electrodeposited flower-like NiFeO x H y and NiFe...Developing cost-effective electrocatalysts for oxygen evolution reaction (OER) in basic media is critical to hydrogen production from renewable energy. Herein, in-situ electrodeposited flower-like NiFeO x H y and NiFeO x H y /rGO composite electrocatalysts on Ni foam for OER are reported. The active sites of the flower-like electrocatalysts are increased significantly due to the enhanced NiFeO x H y surface areas and numerous exposed layered edges and edge defects. Reduced graphene oxide (rGO) has been introduced to fabricate NiFeO x H y /rGO composite film, further improving the conductivity and OER performance of the flower-like NiFeO x H y . The optimized NiFeO x H y /rGO exhibits superior OER performance with a Tafel slope of 29.11 mV/decade, an overpotential of 200 mV at 10 mA/cm 2 in 1 mol/L KOH and favorable long-term stability.展开更多
The nitrate reduction reaction(NtRR)has been demonstrated to be a promising way for obtaining ammonia(NH_(3))by converting NO3-to NH3.Here we report the controlled synthesis of cobalt tetroxide/graphdiyne heterostruct...The nitrate reduction reaction(NtRR)has been demonstrated to be a promising way for obtaining ammonia(NH_(3))by converting NO3-to NH3.Here we report the controlled synthesis of cobalt tetroxide/graphdiyne heterostructured nanowires(Co_(3)O_(4)/GDY NWs)by a simple two-step process including the synthesis of Co_(3)O_(4)NWs and the following growth of GDY using hex-aethynylbenzene as the precursor at 110°C for 10 h.Detailed scanning electron microscopy,high resolution transmission electron microscopy,X-ray photoelectron spectroscopy,and Raman characterization confirmed the synthesis of a Co_(3)O_(4)/GDY heterointerface with the formation of sp-C-Co bonds at the interface and incomplete charge transfer between GDY and Co,which provide a con-tinuous supply of electrons for the catalytic reaction and ensure a rapid NtRR.Because of these advantages,Co_(3)O_(4)/GDY NWs had an excellent NtRR performance with a high NH3 yield rate(YNH3)of 0.78 mmol h^(-1)cm^(-2)and a Faraday efficiency(FE)of 92.45%at-1.05 V(vs.RHE).This work provides a general approach for synthesizing heterostructures that can drive high-performance ammo-nia production from wastewater under ambient conditions.展开更多
To replace precious metal oxygen reduction reaction(ORR)electrocatalysts,many transition metals and N-doped car-bon composites have been proposed in the last decade resulting in their rapid development as promising no...To replace precious metal oxygen reduction reaction(ORR)electrocatalysts,many transition metals and N-doped car-bon composites have been proposed in the last decade resulting in their rapid development as promising non-precious metal catalysts.We used Ketjenblack carbon as the precursor and mixed it with a polymeric ionic liquid(PIL)of[Hvim]NO_(3) and Fe(NO_(3))_(3),which was thermally calcined at 900℃ to produce a porous FeO_(x),N co-doped carbon material denoted FeO_(x)-N/C.Because the PIL of[Hvim]NO_(3) strongly combines with and disperses Fe^(3+)ions,and NO_(3)−is thermally pyrolyzed to form the porous structure,the FeO_(x)-N/C catalyst has a high electrocatalytic activity for the ORR in both 0.1 mol L^(−1) KOH and 0.5 mol L^(−1) H_(2)SO_(4) electrolytes.It was used as the catalyst to assemble a zinc-air battery,which had a peak power density of 185 mW·cm^(−2).Its superior electrocatalytic activity,wide pH range,and easy preparation make FeO_(x)-N/C a promising electrocatalyst for fuel cells and metal-air batteries.展开更多
Electro-copolymerized film containing ruthenium complexes as electron-transfer(or redox)mediators and water-oxidation catalysts by an oxidative copolymerization method is presented.The addition of the redox mediator s...Electro-copolymerized film containing ruthenium complexes as electron-transfer(or redox)mediators and water-oxidation catalysts by an oxidative copolymerization method is presented.The addition of the redox mediator significantly improved the electrocatalytic water-oxidation activity and reduced the overpotential to 220 mV.The prepared electrode showed a water-oxidation catalytic rate constant kobs of 31.7 s^(-1)and an initial turnover frequency of 1.01 s^(-1)in 1000 s by potential electrolysis at 1.7 V applied bias vs NHE(normal hydrogen electrode).The kinetic isotope effect study suggests that the catalytic water oxidation reaction on the electrode surface occurs via a bimolecular coupling mechanism.展开更多
Copper-based catalysts have garnered wide attention in the field of electrocatalytic nitrate reduction for ammonia production due to their low hydrogen precipitation activity and high ammonia selectivity.However,they ...Copper-based catalysts have garnered wide attention in the field of electrocatalytic nitrate reduction for ammonia production due to their low hydrogen precipitation activity and high ammonia selectivity.However,they still face challenges pertaining of poor stability and low activity,which hinder their further application.Herein,we present a Cu_(2)O/Cu heterojunction catalyst supported on nitrogen-doped porous carbon for nitrate reduction.High resolution transmission electron microscopy(HRTEM)and X-ray Diffraction(XRD)results confirm the presence of Cu_(2)O/Cu heterojunctions,which serve as an active phase in catalysis.The nitrogen-doped porous carbon as a carrier not only enhances the catalyst’s stability,but also facilitates the exposure and dispersion of active sites.At-1.29 V(vs.RHE),the maximum production rate of ammonia reaches 8.8 mg/(mg·h)with a Faradaic efficiency of 92.8%.This study also elucidates the effect of Cu_(2)O-to-Cu ratio in the heterojunction on catalytic performance,thereby providing valuable insights for designing efficient nitrate reduction catalysts for ammonia production.展开更多
Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown car...Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown carbon fiber(VGCF)carbon carriers using different silver precursors(AgAc,AgNO_(3))through the ultrafast high temperature thermal shock method.The experimental results demonstrated that the performance of Ag catalysts for the electrocatalytic reduction of CO_(2) to CO could be significantly enhanced by modulating the nanostructure,carrier,and metal loading.The VGCF-AgNO_(3)-HT nanoparticles exhibited a relatively regular spherical morphology,with smaller particle sizes and uniform distribution.Furthermore,the intricate and overlapping arrangement of VGCF carbon nanofibers contributed to increasing the active area for electrochemical reactions,making it an excellent catalyst carrier.Catalysts with varying Ag loadings were prepared using the thermal shock method,and it was observed that the nanoparticles maintained their superior nanostructures even with increased Ag loading.The Ag-HT-65 catalyst exhibited outstanding catalytic performance,achieving a CO Faradaic efficiency of 93.03% at a potential of−0.8 V(vs.RHE).After 12 h of testing,the CO Faradaic efficiency remained 90%,exhibiting an excellent stability.展开更多
Nickel nanoparticles(Ni NPs)encapsulated in carbon shells have shown promise in the electrochemical reduction of CO_(2)to CO.The electronic regulation of the interface between Ni NPs and carbon shells plays a crucial ...Nickel nanoparticles(Ni NPs)encapsulated in carbon shells have shown promise in the electrochemical reduction of CO_(2)to CO.The electronic regulation of the interface between Ni NPs and carbon shells plays a crucial role in reducing the energy barrier of the CO reaction path.We report the formation of a catalyst with hierarchical porosity(Ni NPs@NC)using a high-surface-area 3D Ni-MOF as the precursor.By correlating the pyrolysis temperature with structural changes and catalytic efficiency,structure-activity relationships were established.Because of the confined encapsulation of the Ni NPs by the N-doped carbon layer,the framework does not collapse during pyrolysis but also produces a high-density of exposed Ni-N active sites and better mass transport paths.Notably,the Ni NPs@NC-800 sample had an outstanding electrocatalytic performance for CO_(2)reduction,achieving a maximum Faradaic Efficiency(FE)of 93%at−0.8 V vs RHE,and maintaining over 90%efficiency even after 48 h of continuous operation.Raman spectroscopy showed that the interface between the Ni NPs and the carbon shell play a critical role in stabilizing the critical COOH intermediate,promoting CO desorption and inhibiting the competing hydrogen evolution reaction.This work may provide insight for producing catalysts for efficient electrochemical CO_(2)reduction over a wide potential range.展开更多
基金financial support from the National Natural Science Foundation of China(No.21775003)Anhui Provincial Natural Science Foundation(No.2308085MB56)the Key Project of Anhui Provincial Department of Education Scientific Research Project(No.2023AH040032).
文摘Taking advantage of the extremely small size of the gold nanodisk electrode,the single hydrogen nanobubble generated on the surface of the nanoelectrode was studied to evaluate its hydrogen evolution performance.It was found that compared with the bare gold nanodisk electrode,the bubble formation potential of the gold nanodisk electrode modified with tungsten disulfide quantum dots(WS_(2)QDs)on the surface was more positive,indicating that its hydrogen evolution activity was higher.Microdynamic model analysis shows that the average standard rate constant of the rate-determining step of the hydrogen evolution reaction of gold nanoelectrodes modified with WS_(2)QDs is approximately 12 times larger than that of gold nanoelectrodes.This work based on the formation of nanobubbles provides new ideas for the design and performance evaluation of hydrogen evolution reaction catalysts.
文摘Sulfur-doped iron-cobalt tannate nanorods(S-FeCoTA)derived from metal-organic frameworks(MOFs)as electrocatalysts were synthesized via a one-step hydrothermal method.The optimized S-FeCoTA was interlaced by loose nanorods,which had many voids.The S-FeCoTA catalysts exhibited excellent electrochemical oxygen evolution reaction(OER)performance with a low overpotential of 273 mV at 10 mA·cm^(-2)and a small Tafel slope of 36 mV·dec^(-1)in 1 mol·L^(-1)KOH.The potential remained at 1.48 V(vs RHE)at 10 mA·cm^(-2)under continuous testing for 15 h,implying that S-FeCoTA had good stability.The Faraday efficiency of S-FeCoTA was 94%.The outstanding OER activity of S-FeCoTA is attributed to the synergistic effects among S,Fe,and Co,thus promoting electron transfer,reducing the reaction kinetic barrier,and enhancing the OER performance.
基金supported by the National Natural Science Foundation(22279036)the Innovation and Talent Recruitment Base of New Energy Chemistry and Device(B21003).
文摘Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction(ORR).Atomic ordered intermetallic compounds(IMC)provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms,thus exhibiting superior electrocata-lytic activity and durability.However,quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging.Herein,a series of ternary Pt_(2)NiCo interme-tallic catalysts(o-Pt_(2)NiCo)with different ordering degree were synthesized by annealing temperature modulation.Among them,the o-Pt_(2)NiCo which annealed at 800℃for two hours exhibits the highest ordering degree and the optimal ORR ac-tivity,which the mass activity of o-Pt_(2)NiCo is 1.8 times and 2.8 times higher than that of disordered Pt_(2)NiCo alloy and Pt/C.Furthermore,the o-Pt_(2)NiCo still maintains 70.8%mass activity after 30,000 potential cycles.Additionally,the ORR activity test results for Pt_(2)NiCo IMC with different ordering degree also provide a positive correlation between the ordering degree and ORR activity.This work provides a prospective design direction for ternary Pt-based electrocatalysts.
基金supported by the National Natural Science Foundation of China(22472023,22202037)the Jilin Province Science and Technology Development Program(20250102077JC)the Fundamental Research Funds for the Central Universities(2412024QD014,2412023QD019).
文摘Direct ethanol fuel cells(DEFCs)are a promising alternative to conventional energy sources,offering high energy density,environmental sustainability,and operational safety.Compared to methanol fuel cells,DEFCs exhibit lower toxicity and a more mature preparation process.Unlike hydrogen fuel cells,DEFCs provide superior storage and transport feasibility,as well as cost-effectiveness,significantly enhancing their commercial viability.However,the stable C-C bond in ethanol creates a high activation energy barrier,often resulting in incomplete electrooxidation.Current commercial platinum(Pt)-and palladium(Pd)-based catalysts demonstrate low C-C bond cleavage efficiency(<7.5%),severely limiting DEFC energy output and power density.Furthermore,high catalyst costs and insufficient activity impede large-scale commercialization.Recent advances in DEFC anode catalyst design have focused on optimizing material composition and elucidating catalytic mechanisms.This review systematically examines developments in ethanol electrooxidation catalysts over the past five years,highlighting strategies to improve C1 pathway selectivity and C-C bond activation.Key approaches,such as alloying,nanostructure engineering,and interfacial synergy effects,are discussed alongside their mechanistic implications.Finally,we outline current challenges and future prospects for DEFC commercialization.
基金the financial support from the National Natural Science Foundation of China(No.22178307)China Southern Power Grid(Grant Nos.0470002022030103HX00002-01).
文摘The poor electronic conductivity of metal-organic framework(MOF)materials hinders their direct application in the field of electrocatalysis in fuel cells.Herein,we proposed a strategy of embedding carbon nanotubes(CNTs)during the growth process of MOF crystals,synthesizing a metalloporphyrin-based MOF catalyst TCPPCo-MOF-CNT with a unique CNT-intercalated MOF structure.Physical characterization revealed that the CNTs enhance the overall conductivity while retaining the original characteristics of the MOF and metalloporphyrin.Simultaneously,the insertion of CNTs generated adequate mesopores and created a hierarchical porous structure that enhances mass transfer efficiency.X-ray photoelectron spectroscopic analysis confirmed that the C atom in CNT changed the electron cloud density on the catalytic active center Co,optimizing the electronic structure.Consequently,the E_(1/2) of the TCPPCo-MOF-CNT catalyst under neutral conditions reached 0.77 V(vs.RHE),outperforming the catalyst without CNTs.When the TCPPCo-MOF-CNT was employed as the cathode catalyst in assembling microbial fuel cells(MFCs)with Nafion-117 as the proton exchange membrane,the maxi-mum power density of MFCs reached approximately 500 mW·m^(-2).
基金supported by the National Natural Science Foundation of China(22179138).
文摘The utilization of nickel-based catalysts as alternatives to expensive platinum-based(Pt-based)materials for the hydrogen evolution reaction in acidic electrolytes has attracted considerable attention due to their potential for enabling cost-effective industrial applications.However,the unsatisfied cyclic stability and electrochemical activity limit their further application.In this work,nickel-molybdenum(Ni-Mo)alloy catalysts were successfully synthesized through a comprehensive process including electrodeposition,thermal annealing,and electrochemical activation.Owing to the synergistic interaction of molybdenum trinickelide(Ni_(3)Mo)and molybdenum dioxide(MoO_(2))in Ni-Mo alloy,the catalyst display superior overall electrochemical properties.A low overpotential of 86 mV at 10 mA/cm^(2)and a Tafel slope of 74.0 mV/dec in 0.5 mol/L H_(2)SO_(4)solution can be achieved.Notably,remarkable stability with negligible performance degradation even after 100 h could be maintained.This work presents a novel and effective strategy for the design and fabrication of high-performance,non-precious metal electrocatalysts for acidic water electrolysis.
基金This work was supported by the National Key R&D Program of China(2022YFB4102000 and 2022YFA1505100)the NSFC(22472038)the Shanghai Science and Technology Innovation Action Plan(22dz1205500).
文摘Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separat-ing mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO_(2) capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, along with case studies on the implementation of tandem electrolysis. In comparison to conventional H-type cell, flow cell and membrane electrode assembly cell reactors, SSE reactors incorporate gas diffusion electrodes and utilize a solid electro-lyte layer positioned between an anion exchange membrane (AEM) and a cation exchange membrane (CEM). A key inno-vation of this design is the sandwiched SSE layer, which enhances efficient ion transport and facilitates continuous product extraction through a stream of deionized water or humidified nitrogen, effectively separating ion conduction from product collection. During electrolysis, driven by an electric field and concentration gradient, electrochemically generated ions (e.g., HCOO- and CH3COO-) migrate through the AEM into the SSE layer, while protons produced from water oxidation at the anode traverse the CEM into the central chamber to maintain charge balance. Targeted products like HCOOH can form in the middle layer through ionic recombination and are efficiently carried away by the flowing medium through the porous SSE layer, in the absence of electrolyte salt impurities. As CO_(2)RR can generate a series of liquid products, advancements in catalyst discovery over the past several years have facilitated the industrial application of SSE for more efficient chemicals production. Also noteworthy, the cathode reduction reaction can readily consume protons from water, creating a highly al-kaline local environment. SSE reactors are thereby employed to capture acidic CO_(2), forming CO_(3)^(2-) from various gas sources including flue gases. Driven by the electric field, the formed CO_(3)^(2-) can traverse through the AEM and react with protons originating from the anode, thereby regenerating CO_(2). This CO_(2) can then be collected and utilized as a low-cost feedstock for downstream CO_(2) electrolysis. Based on this principle, several cell configurations have been proposed to enhance CO_(2) capture from diverse gas sources. Through the collaboration of two SSE units, tandem electrochemical CO_(2) capture and con-version has been successfully implemented. Finally, we offer insights into the future development of SSE reactors for prac-tical applications aimed at achieving carbon neutrality. We recommend that greater attention be focused on specific aspects, including the fundamental physicochemical properties of the SSE layer, the electrochemical engineering perspective related to ion and species fluxes and selectivity, and the systematic pairing of consecutive CO_(2) capture and conversion units. These efforts aim to further enhance the practical application of SSE reactors within the broader electrochemistry community.
基金supported by the National Natural Science Foundation of China(22209040,22202063).
文摘The development of highly active catalyst in pH-neutral media for oxygen evolution reaction(OER)is critical in the field of renewable energy storage and conversion.Nevertheless,the slow kinetics of proton-coupled electron transfer(PCET)hinders the overall OER efficiency.Herein,we report an ionic liquid(IL)modified CoSn(OH)_(6)nanocubes(denoted as CoS-n(OH)_(6)-IL),which could be prepared through a facile strategy.The modified IL would not change the structural character-istics of CoSn(OH)_(6),but could effectively regulate the local proton activity near the active sites.The CoSn(OH)_(6)-IL exhibited higher intrinsic OER performances than the pristine CoSn(OH)_(6)in neutral media.For example,the current density of CoS-n(OH)_(6)-IL at 1.8 V versus reversible hydrogen electrode(RHE)was about 4 times higher than that of CoSn(OH)_(6).According to the pH-dependent kinetic investigations,operando electrochemical impedance spectroscopic,chemical probe tests,and deuterium kinetic isotope effects,the interfacial layer of IL could be utilized as a proton transfer mediator to promote the proton transfer,which enhances the surface coverage of OER intermediates and reduces the activation barrier.Consequent-ly,the sluggish OER kinetics would be efficiently accelerated.This study provides a facile and effective strategy to facilitate the PCET processes and is beneficial to guide the rational design of OER electrocatalysts.
文摘Electrocatalytic carbon dioxide(CO_(2))reduction is an important way to achieve carbon neutrality by converting CO_(2)in-to high-value-added chemicals using electric energy.Carbon-based materials are widely used in various electrochemical reactions,including electrocatalytic CO_(2)reduction,due to their low cost and high activity.In recent years,defect engineering has attracted wide attention by constructing asymmetric defect centers in the materials,which can optimize the physicochemical properties of the mater-ial and improve its electrocatalytic activity.This review summarizes the types,methods of formation and defect characterization tech-niques of defective carbon-based materials.The advantages of defect engineering and the advantages and disadvantages of various defect formation methods and characterization techniques are also evaluated.Finally,the challenges of using defective carbon-based materials in electrocatalytic CO_(2)reduction are investigated and opportunities for their use are discussed.It is believed that this re-view will provide suggestions and guidance for developing defective carbon-based materials for CO_(2)reduction.
基金Project(21905232) supported by the National Natural Science Foundation of China。
文摘Non-precious electro catalysts with high-efficiency, cheapness and stablility are of great significance to replace noble metal electro catalysts in the hydrogen evolution reaction(HER) and oxygen evolution reaction(OER). In this work, triangular Cu@CuO nanorods on Cu nanosheets were fabricated by a novel in-situ oxidation approach using Cu nanosheets as self-template and conductive nano-substrate in an aqueous solution of NaOH/H2O2, and then by lowtemperature phosphorization treatments. The experimental results show that the phosphating temperature has a significant effect on the morphology, composition and number of active sites of Cu@Cu_(3)P nanorods. The Cu@Cu_(3)P-280 electrode exhibits a good HER catalytic activity of achieving a current density of 10 mA/cm^(2) at 252 mV in acid electrolyte. After catalysis for 14 h, the current density can still reach 72% of the initial value. Moreover, the Cu@Cu_(3)P-280 electrode also shows an excellent OER catalytic activity in basic electrolyte, reaching a current density of 10 mA/cm^(2) at the overpotential value of 200 mV. After catalysis for 12 h, the current density remained more than 93% of the initial value. This work provides a theoretical basis for the directional design and preparation of sustainable, low-cost, bifunctional electrocatalytic materials.
文摘Developing cost-effective electrocatalysts for oxygen evolution reaction (OER) in basic media is critical to hydrogen production from renewable energy. Herein, in-situ electrodeposited flower-like NiFeO x H y and NiFeO x H y /rGO composite electrocatalysts on Ni foam for OER are reported. The active sites of the flower-like electrocatalysts are increased significantly due to the enhanced NiFeO x H y surface areas and numerous exposed layered edges and edge defects. Reduced graphene oxide (rGO) has been introduced to fabricate NiFeO x H y /rGO composite film, further improving the conductivity and OER performance of the flower-like NiFeO x H y . The optimized NiFeO x H y /rGO exhibits superior OER performance with a Tafel slope of 29.11 mV/decade, an overpotential of 200 mV at 10 mA/cm 2 in 1 mol/L KOH and favorable long-term stability.
文摘The nitrate reduction reaction(NtRR)has been demonstrated to be a promising way for obtaining ammonia(NH_(3))by converting NO3-to NH3.Here we report the controlled synthesis of cobalt tetroxide/graphdiyne heterostructured nanowires(Co_(3)O_(4)/GDY NWs)by a simple two-step process including the synthesis of Co_(3)O_(4)NWs and the following growth of GDY using hex-aethynylbenzene as the precursor at 110°C for 10 h.Detailed scanning electron microscopy,high resolution transmission electron microscopy,X-ray photoelectron spectroscopy,and Raman characterization confirmed the synthesis of a Co_(3)O_(4)/GDY heterointerface with the formation of sp-C-Co bonds at the interface and incomplete charge transfer between GDY and Co,which provide a con-tinuous supply of electrons for the catalytic reaction and ensure a rapid NtRR.Because of these advantages,Co_(3)O_(4)/GDY NWs had an excellent NtRR performance with a high NH3 yield rate(YNH3)of 0.78 mmol h^(-1)cm^(-2)and a Faraday efficiency(FE)of 92.45%at-1.05 V(vs.RHE).This work provides a general approach for synthesizing heterostructures that can drive high-performance ammo-nia production from wastewater under ambient conditions.
文摘To replace precious metal oxygen reduction reaction(ORR)electrocatalysts,many transition metals and N-doped car-bon composites have been proposed in the last decade resulting in their rapid development as promising non-precious metal catalysts.We used Ketjenblack carbon as the precursor and mixed it with a polymeric ionic liquid(PIL)of[Hvim]NO_(3) and Fe(NO_(3))_(3),which was thermally calcined at 900℃ to produce a porous FeO_(x),N co-doped carbon material denoted FeO_(x)-N/C.Because the PIL of[Hvim]NO_(3) strongly combines with and disperses Fe^(3+)ions,and NO_(3)−is thermally pyrolyzed to form the porous structure,the FeO_(x)-N/C catalyst has a high electrocatalytic activity for the ORR in both 0.1 mol L^(−1) KOH and 0.5 mol L^(−1) H_(2)SO_(4) electrolytes.It was used as the catalyst to assemble a zinc-air battery,which had a peak power density of 185 mW·cm^(−2).Its superior electrocatalytic activity,wide pH range,and easy preparation make FeO_(x)-N/C a promising electrocatalyst for fuel cells and metal-air batteries.
文摘Electro-copolymerized film containing ruthenium complexes as electron-transfer(or redox)mediators and water-oxidation catalysts by an oxidative copolymerization method is presented.The addition of the redox mediator significantly improved the electrocatalytic water-oxidation activity and reduced the overpotential to 220 mV.The prepared electrode showed a water-oxidation catalytic rate constant kobs of 31.7 s^(-1)and an initial turnover frequency of 1.01 s^(-1)in 1000 s by potential electrolysis at 1.7 V applied bias vs NHE(normal hydrogen electrode).The kinetic isotope effect study suggests that the catalytic water oxidation reaction on the electrode surface occurs via a bimolecular coupling mechanism.
基金supported by the Fundamental Research Funds for the Central Universities(DUT22LAB601)the Technology Development Contract of Sinopec(123038).
文摘Copper-based catalysts have garnered wide attention in the field of electrocatalytic nitrate reduction for ammonia production due to their low hydrogen precipitation activity and high ammonia selectivity.However,they still face challenges pertaining of poor stability and low activity,which hinder their further application.Herein,we present a Cu_(2)O/Cu heterojunction catalyst supported on nitrogen-doped porous carbon for nitrate reduction.High resolution transmission electron microscopy(HRTEM)and X-ray Diffraction(XRD)results confirm the presence of Cu_(2)O/Cu heterojunctions,which serve as an active phase in catalysis.The nitrogen-doped porous carbon as a carrier not only enhances the catalyst’s stability,but also facilitates the exposure and dispersion of active sites.At-1.29 V(vs.RHE),the maximum production rate of ammonia reaches 8.8 mg/(mg·h)with a Faradaic efficiency of 92.8%.This study also elucidates the effect of Cu_(2)O-to-Cu ratio in the heterojunction on catalytic performance,thereby providing valuable insights for designing efficient nitrate reduction catalysts for ammonia production.
基金Project(52304338)supported by the National Natural Science Foundation of China。
文摘Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown carbon fiber(VGCF)carbon carriers using different silver precursors(AgAc,AgNO_(3))through the ultrafast high temperature thermal shock method.The experimental results demonstrated that the performance of Ag catalysts for the electrocatalytic reduction of CO_(2) to CO could be significantly enhanced by modulating the nanostructure,carrier,and metal loading.The VGCF-AgNO_(3)-HT nanoparticles exhibited a relatively regular spherical morphology,with smaller particle sizes and uniform distribution.Furthermore,the intricate and overlapping arrangement of VGCF carbon nanofibers contributed to increasing the active area for electrochemical reactions,making it an excellent catalyst carrier.Catalysts with varying Ag loadings were prepared using the thermal shock method,and it was observed that the nanoparticles maintained their superior nanostructures even with increased Ag loading.The Ag-HT-65 catalyst exhibited outstanding catalytic performance,achieving a CO Faradaic efficiency of 93.03% at a potential of−0.8 V(vs.RHE).After 12 h of testing,the CO Faradaic efficiency remained 90%,exhibiting an excellent stability.
文摘Nickel nanoparticles(Ni NPs)encapsulated in carbon shells have shown promise in the electrochemical reduction of CO_(2)to CO.The electronic regulation of the interface between Ni NPs and carbon shells plays a crucial role in reducing the energy barrier of the CO reaction path.We report the formation of a catalyst with hierarchical porosity(Ni NPs@NC)using a high-surface-area 3D Ni-MOF as the precursor.By correlating the pyrolysis temperature with structural changes and catalytic efficiency,structure-activity relationships were established.Because of the confined encapsulation of the Ni NPs by the N-doped carbon layer,the framework does not collapse during pyrolysis but also produces a high-density of exposed Ni-N active sites and better mass transport paths.Notably,the Ni NPs@NC-800 sample had an outstanding electrocatalytic performance for CO_(2)reduction,achieving a maximum Faradaic Efficiency(FE)of 93%at−0.8 V vs RHE,and maintaining over 90%efficiency even after 48 h of continuous operation.Raman spectroscopy showed that the interface between the Ni NPs and the carbon shell play a critical role in stabilizing the critical COOH intermediate,promoting CO desorption and inhibiting the competing hydrogen evolution reaction.This work may provide insight for producing catalysts for efficient electrochemical CO_(2)reduction over a wide potential range.
