A principle and method of constructing the digital acquisition system is presented in this work,which is convenient for the study on the theories and algorithms of digital nuclear signal processing.The hardware system...A principle and method of constructing the digital acquisition system is presented in this work,which is convenient for the study on the theories and algorithms of digital nuclear signal processing.The hardware system of the digital acquisition system consists of front-end controller,waveform digitizer and PC workstation,on which the software system has been developed based on Visual C++under Windows environment.The alterable-frequency sampling(AFS)algorithm and the alterable-frequency trapezoidal filter(AFTF)algorithm have also been studied in the real-time environment,along with a digital nuclear spectrum acquisition system being set up based on the new algorithms and theγ-ray spectra of 241Am being shown.A useful experimental platform could be provided by this work for the successive work such as the development of global digitized nuclear measurement system and the study of digital nuclear signal processing.展开更多
This fully digital beam position measurement instrument is designed for beam position monitoring and machine research in Shanghai Synchrotron Radiation Facility. The signals received from four position-sensitive detec...This fully digital beam position measurement instrument is designed for beam position monitoring and machine research in Shanghai Synchrotron Radiation Facility. The signals received from four position-sensitive detectors are narrow pulses with a repetition rate up to 499.654 MHz and a pulse width of around 100 ps, and their dynamic range could vary over more than 40 dB in machine research. By the employment of the under-sampling technique based on high-speed high-resolution A/D conversion, all the processing procedure is performed fully by the digital signal processing algorithms integrated in one single Field Programmable Gate Array. This system functions well in the laboratory and commissioning tests, demonstrating a position resolution (at the turn by turn rate of 694 kHz) better than 7 μm over the input amplitude range of -40 dBm to 10 dBm which is well beyond the requirement.展开更多
A method of describing one-dimensional photonic crystals （1DPCs） based on Z-domain digital signal processing theory is presented. The analytical expression of the target band gap spectrum in the digital domain is ob...A method of describing one-dimensional photonic crystals （1DPCs） based on Z-domain digital signal processing theory is presented. The analytical expression of the target band gap spectrum in the digital domain is obtained by the autocorrelation of its impulse response. The feasibility of this method is verified by reconstructing two simple 1DPC structures with a target photonic band gap obtained by the traditional transfer matrix method. This method provides an effective approach to function-guided designs of interference-based band gap structures for photonic applications.展开更多
A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer syste...A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer system into an electromechanical system. With the DSP computer system, the control signal of each joint of the robot arm can be processed in real time and independently. The simulation and experiment results show that with the control strategy, the robot achieved a good trajectory following precision, a good decoupling performance and a high real-time adaptivity.展开更多
In this paper, we investigate advanced digital signal process ing （DSP） at the transmitter and receiver side for signal pre equalization and postequalization in order to improve spec trum efficiency （SE） and trans...In this paper, we investigate advanced digital signal process ing （DSP） at the transmitter and receiver side for signal pre equalization and postequalization in order to improve spec trum efficiency （SE） and transmission distance in an optical access network. A novel DSP scheme for this optical super Nyquist filtering 9 Quadrature Amplitude Modulation （9 QAM） like signals based on muhimodulus equalization with out post filtering is proposed. This scheme recovers the Ny quist filtered Quadrature PhaseShift Keying （QPSK） signal to a 9QAMlike one. With this technique, SE can be increased to 4 b/s/Hz for QPSK signals. A novel digital superNyquist signal generation scheme is also proposed to further suppress the Nyquist signal bandwidth and reduce channel crosstalk without the need for optical prefiltering. Only optical cou plers are needed for superNyquist wavelengthdivisionmulti plexing （WDM） channel multiplexing. We extend the DSP for shorthaul optical transmission networks by using highorder QAMs. We propose a highspeed Can＇ierless Amplitude/Phase 64 QAM （CAP64 QAM） system using directly modulated la ser （DML） based on direct detection and digital equalization. Decisiondirected least mean square is used to equalize the CAP64QAM. Using this scheme, we generate and transmit up to 60 Gbit/s CAP64QAM over 20 km standard single mode fiber based on the DML and direct detection. Finally, several key problems are solved for real time orthogonalfre quencydivisionmultiplexing （OFDM） signal transmission aml processing. With coherent detection, up to 100 Glfit/s 16 QAMOFDM realtime transmission is possible.展开更多
In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronic...In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronics. To pursue the improved intercon?nection performance of capacity, energy efficiency and simplicity, effective approaches are demonstrated including particularly advanced digital signal processing (DSP) meth?ods. In this paper, we present a review about the enabling adaptive DSP methods for opti?cal interconnection applications, and a detailed summary of our recent and ongoing works in this field. In brief, our works focus on dealing with the specific issues for short-reach interconnection scenarios with adaptive operation, including signal-to-noise-ratio (SNR) limitation, level nonlinearity distortion, energy efficiency consideration and the de?cision precision.展开更多
微处理器芯片的生态建设是高端装备与智能微系统自主、可控的关键,尽管国产数字信号处理(digital signal processing, DSP)器件及其相关开发应用技术近年来得到了一定的发展,但与需求仍存在较大差距。在主动噪声控制领域,前馈型多通道...微处理器芯片的生态建设是高端装备与智能微系统自主、可控的关键,尽管国产数字信号处理(digital signal processing, DSP)器件及其相关开发应用技术近年来得到了一定的发展,但与需求仍存在较大差距。在主动噪声控制领域,前馈型多通道控制方案比单通道有较大的控制范围和较好的性能,但对系统的运算能力有较高的要求。文章以多通道FxLMS算法为基础,对多通道降噪系统的运算量进行了分析,依据国产DSP开发板的电路结构,设计了控制系统方案,并进行了实验研究。实验表明,所设计的噪声控制系统运算效率较ARM作为运算器提高了80%,对100~1 000 Hz内的周期性噪声信号衰减达到15~20 dB,证明了该方案的正确性。展开更多
In this paper, we present an optimized design method for high-speed embedded image processing system using 32 bit floating-point Digital Signal Processor （DSP） and Complex Programmable Logic Device （CPLD）. The DSP...In this paper, we present an optimized design method for high-speed embedded image processing system using 32 bit floating-point Digital Signal Processor （DSP） and Complex Programmable Logic Device （CPLD）. The DSP acts as the main processor of the system： executes digital image processing algorithms and operates other devices such as image sensor and CPLD. The CPLD is used to acquire images and achieve complex logic control of the whole system. Some key technologies are introduced to enhance the performance of our system. In particular, the use of DSP/BIOS tool to develop DSP applications makes our program run much more efficiently. As a result, this system can provide an excellent computing platform not only for executing complex image processing algorithms, but also for other digital signal processing or multi-channel data collection by choosing different sensors or Analog-to-Digital （A/D） converters.展开更多
设计一种应用于广播电视发射基站的信号实时信道均衡系统,该系统基于数字信号处理(Digital Signal Processing,DSP)算法,旨在提高信号传输质量并降低误码率。系统由信号预处理、信道估计、自适应均衡3个关键模块组成。信号预处理模块采...设计一种应用于广播电视发射基站的信号实时信道均衡系统,该系统基于数字信号处理(Digital Signal Processing,DSP)算法,旨在提高信号传输质量并降低误码率。系统由信号预处理、信道估计、自适应均衡3个关键模块组成。信号预处理模块采用自适应滤波技术去除噪声和干扰;信道估计模块利用频域分析技术精确估计信道参数;自适应均衡模块则通过最小均方误差(Least Mean Square,LMS)算法动态调整均衡器系数,以补偿信道失真。实验结果表明,该系统在城市、郊区、山区环境下均能显著提高信号质量,降低误码率,并提供足够的信道容量,满足广播电视信号的高质量实时传输需求。展开更多
为实现星载数字时间延迟积分(Digital Time Integration Delay,DTDI)系统的有效设计与成像质量分析,文章提出星载DTDI系统全链路成像质量影响因素分析方法。首先,分析了技术的原理和影响因素,在此基础上构建了场景-大气-星载系统-处理...为实现星载数字时间延迟积分(Digital Time Integration Delay,DTDI)系统的有效设计与成像质量分析,文章提出星载DTDI系统全链路成像质量影响因素分析方法。首先,分析了技术的原理和影响因素,在此基础上构建了场景-大气-星载系统-处理的全链路DTDI成像系统仿真模型,开展了多要素影响下的DTDI成像仿真试验与分析评价。结果表明:0.9 m分辨率下,积分时间0.063 ms、量化位数12 bit、TDI级数6级可以获得较好的成像质量,利用DTDI技术可将平台稳定度要求降至0.1(°)/s。文章研究成果可为星载DTDI系统设计分析提供参考。展开更多
基金Supported by National Natural Science Foundation of China(NSFC)projects(No.1075111)
文摘A principle and method of constructing the digital acquisition system is presented in this work,which is convenient for the study on the theories and algorithms of digital nuclear signal processing.The hardware system of the digital acquisition system consists of front-end controller,waveform digitizer and PC workstation,on which the software system has been developed based on Visual C++under Windows environment.The alterable-frequency sampling(AFS)algorithm and the alterable-frequency trapezoidal filter(AFTF)algorithm have also been studied in the real-time environment,along with a digital nuclear spectrum acquisition system being set up based on the new algorithms and theγ-ray spectra of 241Am being shown.A useful experimental platform could be provided by this work for the successive work such as the development of global digitized nuclear measurement system and the study of digital nuclear signal processing.
基金Supported by Knowledge Innovation Program of The Chinese Academy of Sciences (KJCX2-YW-N27)the National Natural Science Foundation of China (10875119)100 Talents Program of The Chinese Academy of Sciences
文摘This fully digital beam position measurement instrument is designed for beam position monitoring and machine research in Shanghai Synchrotron Radiation Facility. The signals received from four position-sensitive detectors are narrow pulses with a repetition rate up to 499.654 MHz and a pulse width of around 100 ps, and their dynamic range could vary over more than 40 dB in machine research. By the employment of the under-sampling technique based on high-speed high-resolution A/D conversion, all the processing procedure is performed fully by the digital signal processing algorithms integrated in one single Field Programmable Gate Array. This system functions well in the laboratory and commissioning tests, demonstrating a position resolution (at the turn by turn rate of 694 kHz) better than 7 μm over the input amplitude range of -40 dBm to 10 dBm which is well beyond the requirement.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10804070 and 61137002)the Key Program of the Science and Technology Commission of Shanghai,China(Grant No.11jc1413300)the Shanghai Leading Academic Discipline Project,China(Grant No.S30108)
文摘A method of describing one-dimensional photonic crystals （1DPCs） based on Z-domain digital signal processing theory is presented. The analytical expression of the target band gap spectrum in the digital domain is obtained by the autocorrelation of its impulse response. The feasibility of this method is verified by reconstructing two simple 1DPC structures with a target photonic band gap obtained by the traditional transfer matrix method. This method provides an effective approach to function-guided designs of interference-based band gap structures for photonic applications.
文摘A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer system into an electromechanical system. With the DSP computer system, the control signal of each joint of the robot arm can be processed in real time and independently. The simulation and experiment results show that with the control strategy, the robot achieved a good trajectory following precision, a good decoupling performance and a high real-time adaptivity.
基金supported by the High Technology Research and Development Program of China("863"Program)under Grant No.2012AA011303 and 2013AA010501National Nature Science Foundation of China under Grant No.61325002
文摘In this paper, we investigate advanced digital signal process ing （DSP） at the transmitter and receiver side for signal pre equalization and postequalization in order to improve spec trum efficiency （SE） and transmission distance in an optical access network. A novel DSP scheme for this optical super Nyquist filtering 9 Quadrature Amplitude Modulation （9 QAM） like signals based on muhimodulus equalization with out post filtering is proposed. This scheme recovers the Ny quist filtered Quadrature PhaseShift Keying （QPSK） signal to a 9QAMlike one. With this technique, SE can be increased to 4 b/s/Hz for QPSK signals. A novel digital superNyquist signal generation scheme is also proposed to further suppress the Nyquist signal bandwidth and reduce channel crosstalk without the need for optical prefiltering. Only optical cou plers are needed for superNyquist wavelengthdivisionmulti plexing （WDM） channel multiplexing. We extend the DSP for shorthaul optical transmission networks by using highorder QAMs. We propose a highspeed Can＇ierless Amplitude/Phase 64 QAM （CAP64 QAM） system using directly modulated la ser （DML） based on direct detection and digital equalization. Decisiondirected least mean square is used to equalize the CAP64QAM. Using this scheme, we generate and transmit up to 60 Gbit/s CAP64QAM over 20 km standard single mode fiber based on the DML and direct detection. Finally, several key problems are solved for real time orthogonalfre quencydivisionmultiplexing （OFDM） signal transmission aml processing. With coherent detection, up to 100 Glfit/s 16 QAMOFDM realtime transmission is possible.
基金This work was supported by National Natural Science Foundation of Chi⁃na(NSFC)under Grant Nos.61935011,61875124 and 61875049.
文摘In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronics. To pursue the improved intercon?nection performance of capacity, energy efficiency and simplicity, effective approaches are demonstrated including particularly advanced digital signal processing (DSP) meth?ods. In this paper, we present a review about the enabling adaptive DSP methods for opti?cal interconnection applications, and a detailed summary of our recent and ongoing works in this field. In brief, our works focus on dealing with the specific issues for short-reach interconnection scenarios with adaptive operation, including signal-to-noise-ratio (SNR) limitation, level nonlinearity distortion, energy efficiency consideration and the de?cision precision.
基金Supported by the National Natural Science Foundation of China (No.60472046)
文摘In this paper, we present an optimized design method for high-speed embedded image processing system using 32 bit floating-point Digital Signal Processor （DSP） and Complex Programmable Logic Device （CPLD）. The DSP acts as the main processor of the system： executes digital image processing algorithms and operates other devices such as image sensor and CPLD. The CPLD is used to acquire images and achieve complex logic control of the whole system. Some key technologies are introduced to enhance the performance of our system. In particular, the use of DSP/BIOS tool to develop DSP applications makes our program run much more efficiently. As a result, this system can provide an excellent computing platform not only for executing complex image processing algorithms, but also for other digital signal processing or multi-channel data collection by choosing different sensors or Analog-to-Digital （A/D） converters.
文摘设计一种应用于广播电视发射基站的信号实时信道均衡系统,该系统基于数字信号处理(Digital Signal Processing,DSP)算法,旨在提高信号传输质量并降低误码率。系统由信号预处理、信道估计、自适应均衡3个关键模块组成。信号预处理模块采用自适应滤波技术去除噪声和干扰;信道估计模块利用频域分析技术精确估计信道参数;自适应均衡模块则通过最小均方误差(Least Mean Square,LMS)算法动态调整均衡器系数,以补偿信道失真。实验结果表明,该系统在城市、郊区、山区环境下均能显著提高信号质量,降低误码率,并提供足够的信道容量,满足广播电视信号的高质量实时传输需求。
