Lithium metal anode is a promising electrode with high theoretical specific capacity and low electrode potential.However,its unstable interface and low Coulombic efficiency,resulting from the dendritic growth of lithi...Lithium metal anode is a promising electrode with high theoretical specific capacity and low electrode potential.However,its unstable interface and low Coulombic efficiency,resulting from the dendritic growth of lithium,limits its commercial application.PIM-1(PIM:polymer of intrinsic microporosity),which is a polymer with abundant micropores,exhibits high rigidity and flexibility with contorted spirocenters in the backbone,and is an ideal candidate for artificial solid electrolyte interphases(SEI).In this work,a PIM-1 membrane was synthesized and fabricated as a protective membrane on the surface of an electrode to facilitate the uniform flux of Li ions and act as a stable interface for the lithium plating/stripping process.Nodule-like lithium with rounded edges was observed under the PIM-1 membrane.The Li@PIM-1 electrode delivered a high average Coulombic efficiency(99.7%),excellent cyclability(80%capacity retention rate after 600 cycles at 1 C),and superior rate capability(125.3 m Ah g-1 at 10 C).Electrochemical impedance spectrum(EIS)showed that the PIM-1 membrane could lower the diffusion rate of Li+significantly and change the rate-determining step from charge transfer to Li+diffusion.Thus,the PIM-1 membrane is proven to act as an artificial SEI to facilitate uniform and stable deposition of lithium,in favor of obtaining a compact and dense Li-plating pattern.This work extends the application of PIMs in the field of lithium batteries and provides ideas for the construction of artificial SEI.展开更多
Determining the rate of asphaltene particle growth is one of the main problems in modeling of asphaltene precipitation and deposition.In this paper,the kinetics of asphaltene aggregation under different precipitant co...Determining the rate of asphaltene particle growth is one of the main problems in modeling of asphaltene precipitation and deposition.In this paper,the kinetics of asphaltene aggregation under different precipitant concentrations have been studied.The image processing method was performed on the digital photographs that were taken by a microscope as a function of time to determine the asphaltene aggregation growth mechanisms.The results of image processing by MATLAB software revealed that the growth of asphaltene aggregates is strongly a function of time.Different regions could be recognized during asphaltene particle growth including reaction-and diffusion-limited aggregation followed by reaching the maximum asphaltene aggregate size and start of asphaltene settling and the final equilibrium.Modeling has been carried out to predict the growth of asphaltene particle size based on the fractal theory.General equations have been developed for kinetics of asphaltene aggregation for reaction-limited aggregation and diffusion-limited aggregation.The maximum size of asphaltene aggregates and settling time were modeled by using force balance,acting on asphaltene particles.Results of modeling show a good agreement between laboratory measurements and model calculations.展开更多
Systematic CR-39 bulk etching experiments were conducted over a wide range of concentrations(2–30 N)of NaOH-based etchant.Critical analysis and a deep discussion of the results are presented.A comprehensive nuclear t...Systematic CR-39 bulk etching experiments were conducted over a wide range of concentrations(2–30 N)of NaOH-based etchant.Critical analysis and a deep discussion of the results are presented.A comprehensive nuclear track chemical etching data bank was developed.Three regimes of CR-39 bulk etching were identified.Regime I spans etchant concentrations from 2 to 12 N.Regime II spans concentrations from 12 to 25 N.We call this the dynamic bulk etching regime.Regime III is for concentrations greater than 25 N.In this regime,the bulk etch rate is saturated with respect to the etchant concentration.This classification is discussed and explained.The role of ethanol in NaOH-based etchants is explored and discussed.A parameter called the “reduced bulk etch rate” is defined here,which helps in analyzing the dependence of bulk etching on the amount of ethanol in the etchant.The bulk etch rate shows a natural logarithmic dependence on the density of ethanol in the etchant.展开更多
A new kind of multifractal is constructed by fractional Fourier transform of Cantor sets. The wavelet transform modulus maxima method is applied to calculate the singularity spectrum under an operational definition of...A new kind of multifractal is constructed by fractional Fourier transform of Cantor sets. The wavelet transform modulus maxima method is applied to calculate the singularity spectrum under an operational definition of multifractal. In particular, an analysing procedure to determine the spectrum is suggested for practice. Nonanalyticities of singularity spectra or phase transitions are discovered, which are interpreted as some indications on the range of Boltzmann temperature q, on which the scaling relation of partition function holds.展开更多
基金supported by the Opening Project(SKLACPS-C-21)of the State Key Laboratory of Advanced Chemical Power Source,Guizhou Meiling Power Sources Co.,Ltd.the Program for Innovative and Entrepreneurial team in Zhuhai(ZH01110405160007PWC).
文摘Lithium metal anode is a promising electrode with high theoretical specific capacity and low electrode potential.However,its unstable interface and low Coulombic efficiency,resulting from the dendritic growth of lithium,limits its commercial application.PIM-1(PIM:polymer of intrinsic microporosity),which is a polymer with abundant micropores,exhibits high rigidity and flexibility with contorted spirocenters in the backbone,and is an ideal candidate for artificial solid electrolyte interphases(SEI).In this work,a PIM-1 membrane was synthesized and fabricated as a protective membrane on the surface of an electrode to facilitate the uniform flux of Li ions and act as a stable interface for the lithium plating/stripping process.Nodule-like lithium with rounded edges was observed under the PIM-1 membrane.The Li@PIM-1 electrode delivered a high average Coulombic efficiency(99.7%),excellent cyclability(80%capacity retention rate after 600 cycles at 1 C),and superior rate capability(125.3 m Ah g-1 at 10 C).Electrochemical impedance spectrum(EIS)showed that the PIM-1 membrane could lower the diffusion rate of Li+significantly and change the rate-determining step from charge transfer to Li+diffusion.Thus,the PIM-1 membrane is proven to act as an artificial SEI to facilitate uniform and stable deposition of lithium,in favor of obtaining a compact and dense Li-plating pattern.This work extends the application of PIMs in the field of lithium batteries and provides ideas for the construction of artificial SEI.
文摘Determining the rate of asphaltene particle growth is one of the main problems in modeling of asphaltene precipitation and deposition.In this paper,the kinetics of asphaltene aggregation under different precipitant concentrations have been studied.The image processing method was performed on the digital photographs that were taken by a microscope as a function of time to determine the asphaltene aggregation growth mechanisms.The results of image processing by MATLAB software revealed that the growth of asphaltene aggregates is strongly a function of time.Different regions could be recognized during asphaltene particle growth including reaction-and diffusion-limited aggregation followed by reaching the maximum asphaltene aggregate size and start of asphaltene settling and the final equilibrium.Modeling has been carried out to predict the growth of asphaltene particle size based on the fractal theory.General equations have been developed for kinetics of asphaltene aggregation for reaction-limited aggregation and diffusion-limited aggregation.The maximum size of asphaltene aggregates and settling time were modeled by using force balance,acting on asphaltene particles.Results of modeling show a good agreement between laboratory measurements and model calculations.
文摘Systematic CR-39 bulk etching experiments were conducted over a wide range of concentrations(2–30 N)of NaOH-based etchant.Critical analysis and a deep discussion of the results are presented.A comprehensive nuclear track chemical etching data bank was developed.Three regimes of CR-39 bulk etching were identified.Regime I spans etchant concentrations from 2 to 12 N.Regime II spans concentrations from 12 to 25 N.We call this the dynamic bulk etching regime.Regime III is for concentrations greater than 25 N.In this regime,the bulk etch rate is saturated with respect to the etchant concentration.This classification is discussed and explained.The role of ethanol in NaOH-based etchants is explored and discussed.A parameter called the “reduced bulk etch rate” is defined here,which helps in analyzing the dependence of bulk etching on the amount of ethanol in the etchant.The bulk etch rate shows a natural logarithmic dependence on the density of ethanol in the etchant.
文摘A new kind of multifractal is constructed by fractional Fourier transform of Cantor sets. The wavelet transform modulus maxima method is applied to calculate the singularity spectrum under an operational definition of multifractal. In particular, an analysing procedure to determine the spectrum is suggested for practice. Nonanalyticities of singularity spectra or phase transitions are discovered, which are interpreted as some indications on the range of Boltzmann temperature q, on which the scaling relation of partition function holds.
