As the support mechanism of space-borne antennas,space deployable antenna mechanism belongs to complex multi-closed-loop coupling mechanism,configuration design and dynamic analysis are more difficult than general par...As the support mechanism of space-borne antennas,space deployable antenna mechanism belongs to complex multi-closed-loop coupling mechanism,configuration design and dynamic analysis are more difficult than general parallel mechanism.In this paper,an unequal-length scissors mechanism(ULSM)is proposed by changing the position of the internal rotational joint through a basic scissors mechanism.A scissors hoop-rib truss deployable antenna mechanism(SHRTDAM)is constructed by replacing the parabolic rib with the ULSM.Kinematic analysis of SHRTDAM is conducted,and the degree of freedom(DOF)of the whole antenna mechanism is analyzed based on screw theory,the result showed that it has only one DOF.Velocity and acceleration characteristics of SHRTDAM are obtained by the screw derivative and rotation transformation.Based on Lagrange equation,dynamic model of this mechanism is established,the torque required to drive the mechanism is simulated and verified by Adams and MATLAB software.In addition,a ground experiment prototype of 1.5-m diameter was fabricated and a deployment test is conducted,which demonstrated the mobility and deployment performance of the whole mechanism.The mechanism proposed in this paper can provide a good reference for the design and analysis of large aperture space deployable antennas.展开更多
The dynamic equivalent continuum modeling method of the mast which is based on energy equivalency principle was investigated. And three kinds of mast dynamic model were established, which were equivalent continuum mod...The dynamic equivalent continuum modeling method of the mast which is based on energy equivalency principle was investigated. And three kinds of mast dynamic model were established, which were equivalent continuum model, finite element model and simulation model, respectively. The mast frequencies and mode shapes were calculated by these models and compared with each other. The error between the equivalent continuum model and the finite element model is less than 5% when the mast length is longer. Dynamic responses of the mast with different lengths are tested, the mode frequencies and mode shapes are compared with finite element model. The mode shapes match well with each other, while the frequencies tested by experiments are lower than the results of the finite element model, which reflects the joints lower the mast stiffness. The nonlinear dynamic characteristics are presented in the dynamic responses of the mast under different excitation force levels. The joint nonlinearities in the deployable mast are identified as nonlinear hysteresis contributed by the coulomb friction which soften the mast stiffness and lower the mast frequencies.展开更多
The potential role of formal structural optimization was investigated for designing foldable and deployable structures in this work.Shape-sizing nested optimization is a challenging design problem.Shape,represented by...The potential role of formal structural optimization was investigated for designing foldable and deployable structures in this work.Shape-sizing nested optimization is a challenging design problem.Shape,represented by the lengths and relative angles of elements,is critical to achieving smooth deployment to a desired span,while the section profiles of each element must satisfy structural dynamic performances in each deploying state.Dynamic characteristics of deployable structures in the initial state,the final state and also the middle deploying states are all crucial to the structural dynamic performances.The shape was represented by the nodal coordinates and the profiles of cross sections were represented by the diameters and thicknesses.SQP(sequential quadratic programming) method was used to explore the design space and identify the minimum mass solutions that satisfy kinematic and structural dynamic constraints.The optimization model and methodology were tested on the case-study of a deployable pantograph.This strategy can be easily extended to design a wide range of deployable structures,including deployable antenna structures,foldable solar sails,expandable bridges and retractable gymnasium roofs.展开更多
The compact ortho-mode transducer (OMT) and compact conical corrugated horn(CCCH) are used as feeding system of the deployable dual polarizing antenna in this paper.A new stricture of double-septum in main wave guide ...The compact ortho-mode transducer (OMT) and compact conical corrugated horn(CCCH) are used as feeding system of the deployable dual polarizing antenna in this paper.A new stricture of double-septum in main wave guide OMT is proposed. The finite difference method in time domain (FDTD) in combination with genetic algorithms(GAs) is used to analysis and optimize this new OMT. The experiment results show that the voltage standing wave ratio (VSWR) of this OMT and feeding system is less than 1.17 in bandwidth; the isolation between the ortho-mode ports is less than -40dB; the cross-polar level of the feed can reach -35dB and the length of the main waveguide can be reduced 50% at least.展开更多
As the mining industry continues to expand and international oil prices increase,more rigorous demands are being placed on the design of mining equipment.Given this,there is an urgent need to develop new power-driven ...As the mining industry continues to expand and international oil prices increase,more rigorous demands are being placed on the design of mining equipment.Given this,there is an urgent need to develop new power-driven mining equipment to solve the problems of high energy consumption and insufficient power coupling of current equipment.This study proposed a design of a hybrid power system for underground Load Haul Dump(LHD).The proposed design integrated Quality Function Deployment(QFD)and Theory of Inventive Problem Solving(TRIZ).It identified 7 user requirements and 10 related technical features,formulated 11 innovative design solutions,and ultimately adopting an electric drive hybrid power scheme.This scheme effectively addressesd power transmission coupling problems and improve the efficiency of loaders.A 6 m³hybrid power loader prototype has been developed,which reduces operational energy consumption and advances the electrification and green,low-carbon evolution of mining equipment.展开更多
Resource management must attach importance to effective resource deployment.Aiming at the research of resource deployment system,firstly,as an important factor of resource deployment system,corporate technological inn...Resource management must attach importance to effective resource deployment.Aiming at the research of resource deployment system,firstly,as an important factor of resource deployment system,corporate technological innovation social responsibility(CISR)is analyzed.Based on this,this paper constructs a system dynamics model to analyze the changes in resource deployment system affected by CISR.The simulation model is developed using Venism personal learning edition(PLE).The results show that CISR,acted as a new factor affecting the resource deployment system,has a positive effect on resource deployment system performance.Moreover,when CISR exceeds the threshold value,the resource deployment system performance increases significantly faster,reflecting that the resource deployment system becomes more efficient.The results show that the method proposed in this paper is feasible and efficient.This research provides theoretical and practical implications for resource deployment system research.展开更多
In this paper,the design,manufacture and testing of an origami protective shield with a supporting frame structure are presented.It consists of an origami shield surface and a deployable supporting frame structure tha...In this paper,the design,manufacture and testing of an origami protective shield with a supporting frame structure are presented.It consists of an origami shield surface and a deployable supporting frame structure that needs to be portable and sufficiently stiff.First,for the design of the shield surface,a threestage origami crease pattern is developed to reduce the shield size in the folded state.The shield surface consists of several stiff modular panels and layered with flexible fabric.The modular panels are made of a multi-layer composite where a ceramic layer is made of small pieces to improve durability as those small pieces enable restriction of crack propagation.Then,the supporting frame structure is designed as a chain-of-bars structure in order to fold into a highly compact state as a bundle of bars and deploy in sequence.Thus,a feature-driven topology structural optimization method preserving component sequence is developed where the inter-dependence of sub-structures is taken into account.A bar with semi-circular ends is used as a basic design feature.The positions of the bar’s end points are treated as design variables and the width of the bars is kept constant.Then,a constraint on the total length of the chain of bars is introduced.Finally,the modular panels made of multi-layer composite and the full-scale prototype of the origami shield are fabricated and tested to verify the bullet-proof performance.展开更多
Dynamic analysis of the tethered satellite system(TSS)can provide a fundamental guideline to the evaluation of performance and robust design of the system examined.Uncertainties inherited with the parameters would ind...Dynamic analysis of the tethered satellite system(TSS)can provide a fundamental guideline to the evaluation of performance and robust design of the system examined.Uncertainties inherited with the parameters would induce unexpected variation of the response and deteriorate the reliability of the system.In this work,the effect of uncertain mass of the satellites on the deployment and retrieval dynamics of the TSS is investigated.First the interval mode is employed to take the variation of mass of satellite into account in the processes of deployment and retrieval.Then,the Chebyshev interval method is used to obtain the lower and upper response bounds of the TSS.To achieve a smooth and reliable implementation of deployment and retrieval,the nonlinear programming based on the Gauss pseudospectral method is adopted to obtain optimal trajectory of tether velocity.Numerical results show that the uncertainties of mass of the satellites have a distinct influence on the response of tether tension in the processes of deployment and retrieval.展开更多
This paper realizes the full-domain collaborative deployment of multiple interference sources of the global satellite navigation system(GNSS)and evaluates the deployment effect to enhance the ability to disturb the at...This paper realizes the full-domain collaborative deployment of multiple interference sources of the global satellite navigation system(GNSS)and evaluates the deployment effect to enhance the ability to disturb the attacker and the capability to defend the GNSS during navigation countermeasures.Key evaluation indicators for the jamming effect of GNSS suppressive and deceptive jamming sources are first created,their evaluation models are built,and their detection procedures are sorted out,as the basis for determining the deployment principles.The principles for collaboratively deploying multi-jamming sources are developed to obtain the deployment structures(including the required number,structures in demand,and corresponding positions)of three single interference sources required by collaboratively deploying.Accordingly,simulation and hardware-in-loop testing results are presented to determine a rational configuration of the collaborative deployment of multi-jamming sources in the set situation and further realize the full-domain deployment of an interference network from ground,air to space.Varied evaluation indices for the deployment effect are finally developed to evaluate the deployment effect of the proposed configuration and further verify its reliability and rationality.展开更多
Sensors deployment optimization has become one of the most attractive fields in recent years. However, most of the previous work focused on the deployment problem in 2D space.Compared to the traditional form, sensors ...Sensors deployment optimization has become one of the most attractive fields in recent years. However, most of the previous work focused on the deployment problem in 2D space.Compared to the traditional form, sensors deployment in multidimensional space has greater research significance and practical potential to satisfy the detecting needs in complex environment.Aiming at solving this issue, a multi-dimensional space sensor network model is established, and the radar system is selected as an example. Considering the possible working mode of the radar system(e.g., searching and tracking), two distinctive deployment models are proposed based on maximum coverage area and maximum target detection probability in the attack direction respectively. The latter one is usually ignored in the previous literature.For uncovering the optimal deployment of the sensor network, the particle swarm optimization(PSO) algorithm is improved using the proposed weights determination scheme, in which the linear decreasing, the pooling strategy and the cloud theory are combined for weights updating. Experimental results illustrate the effectiveness of the proposed method.展开更多
In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support...In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support provided by wartime military material support powers can be more effective. When the principles,requirements, influencing factors and goals of military material support forces are deployed in wartime, an evaluation indicator system is established. Thus, a new combined empowerment method based on an analytic hierarchy process（AHP） is developed to calculate the subjective weights, and the rough entropy method is used to calculate the objective weights. Combination weights can be obtained by calculating the weight preference coefficient error, which is determined by combining the cooperative game method and the minimum deviation into objectives. This approach can determine the grey relation projection coefficient and synthesize the measure scheme superiority to finally optimize the deployment plan using the grey relation projection decision-making method. The results show that the method is feasible and effective;it can provide a more scientific and practical decision-making basis for the military material support power deployment in wartime.展开更多
With applying the information technology to the military field, the advantages and importance of the networked combat are more and more obvious. In order to make full use of limited battlefield resources and maximally...With applying the information technology to the military field, the advantages and importance of the networked combat are more and more obvious. In order to make full use of limited battlefield resources and maximally destroy enemy targets from arbitrary angle in a limited time, the research on firepower nodes dynamic deployment becomes a key problem of command and control. Considering a variety of tactical indexes and actual constraints in air defense, a mathematical model is formulated to minimize the enemy target penetration probability. Based on characteristics of the mathematical model and demands of the deployment problems, an assistance-based algorithm is put forward which combines the artificial potential field （APF） method with a memetic algorithm. The APF method is employed to solve the constraint handling problem and generate feasible solutions. The constrained optimization problem transforms into an optimization problem of APF parameters adjustment, and the dimension of the problem is reduced greatly. The dynamic deployment is accomplished by generation and refinement of feasible solutions. The simulation results show that the proposed algorithm is effective and feasible in dynamic situation.展开更多
The hydrodynamic problem of a two-dimensional model of seafloor mining tool entering still water vertically at constant speed was analyzed based on the velocity potential theory. For the assumption that the water entr...The hydrodynamic problem of a two-dimensional model of seafloor mining tool entering still water vertically at constant speed was analyzed based on the velocity potential theory. For the assumption that the water entry occurs with very short time interval, the viscosity and gravity of fluid were neglected. Considering the characteristic shape of it, the seafloor mining tool was simplified as a flat-bottom body. The governing equations were the Reynolds time-averaged equations and the k-e model. Finite element analysis was undertaken using the CFD software, Fluent. The impact pressures on the bottom of the mining tool were computed based on the improved volume of fuid method （VOF）. The pressure distribution, the maximum impact pressure, and the impact duration time during the water entry of mining tool are presented at various deploying velocities, the two peak pressures in the impact process are observed, and the relationship between the maximum impact pressure and the deploying velocity is obtained. The results are compared with those based on other prediction theories and methods.展开更多
In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to eva...In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to evaluate the maturity degree of the solution, and the evaluation results can help to manage and control the development process. Furthermore, a fuzzy evaluation method based on the minimum deviation is proposed to deal with the fuzzy information. The quantitative evaluation result of the maturity degree can be calculated by optimizing the semantic discount factor aim for the minimum deviation. Finally, this model is illustrated and analyzed by an example study of the aircraft collaborative design software.展开更多
Quality function deployment （QFD） is a well-known customer-oriented product design methodology. Rating the final importance of customer requirements （CRs） is really a very es- sential starting point in the impleme...Quality function deployment （QFD） is a well-known customer-oriented product design methodology. Rating the final importance of customer requirements （CRs） is really a very es- sential starting point in the implementation of QFD, since it largely affects the target setting value of design requirements. This pa- per aims to propose a novel method to deal with the relative importance ratings （RIRs） of CRs problem considering customers＇ diversified requirements and unknown information on customers＇ weights, which is an indispensable process for determining the final importance ratings of CRs. First, a new concept of customer＇s assessment structure is proposed according to the basic idea of grey relational analysis （GRA）, and then a constrained nonlinear optimization model is constructed to describe the assessment information aggregation factors of CRs considering customers＇ personalized and diversified requirements. Furthermore, an im- mune particle swarm optimization （IPSO） algorithm is designed to solve the model, and the weight vector of customers is obtained. Finally, a car door design example is introduced to illustrate the novel hybrid GRA-IPSO method＇s potential application in deter- mining the RIRs of CRs.展开更多
The tether deployment of a tethered satellite system involves the consideration of complex dynamic properties of the tether,such as large deformation,slack,and even rebound,and therefore,the dynamic modelling of the t...The tether deployment of a tethered satellite system involves the consideration of complex dynamic properties of the tether,such as large deformation,slack,and even rebound,and therefore,the dynamic modelling of the tether is necessary for performing a dynamic analysis of the system.For a variablelength tether element,the absolute nodal coordinate formulation(ANCF)in the framework of the arbitrary Lagrange-Euler(ALE)description was used to develop a precise dynamic model of a tethered satellite.The model considered the gravitational gradient force and Coriolis force in the orbital coordinate frame,and it was validated through numerical simulation.In the presence of dynamic constraints,a deployment velocity of the tether was obtained by an optimal procedure.In the simulation,rebound behavior of the tethered satellite system was observed when the ANCF-ALE model was employed.Notably,the rebound behavior cannot be predicted by the traditional dumbbell model.Furthermore,an improved optimal deployment velocity was developed.Simulation results indicated that the rebound phenomenon was eliminated,and smooth deployment as well as a stable state of the station-keeping process were achieved.Additionally,the swing amplitude in the station-keeping phase decreased when a deployment strategy based on the improved optimal deployment velocity was used.展开更多
To address the problem of building linear barrier coverage with the location restriction, an optimization method for deploying multistatic radars is proposed, where the location restriction splits the deployment line ...To address the problem of building linear barrier coverage with the location restriction, an optimization method for deploying multistatic radars is proposed, where the location restriction splits the deployment line into two segments. By proving the characteristics of deployment patterns, an optimal deployment sequence consisting of multiple deployment patterns is proposed and exploited to cover each segment. The types and numbers of deployment patterns are determined by an algorithm that combines the integer linear programming(ILP)and exhaustive method(EM). In addition, to reduce the computation amount, a formula is introduced to calculate the upper threshold of receivers’ number in a deployment pattern. Furthermore, since the objective function is non-convex and non-analytic, the overall model is divided into two layers concerning two suboptimization problems. Subsequently, another algorithm that integrates the segments and layers is proposed to determine the deployment parameters, such as the minimum cost, parameters of the optimal deployment sequence, and the location of the split point. Simulation results demonstrate that the proposed method can effectively determine the optimal deployment parameters under the location restriction.展开更多
In the implementation of quality function deployment （QFD）, the determination of the target values of engineering characteristics is a complex decision process with multiple variables and multiple objectives that sh...In the implementation of quality function deployment （QFD）, the determination of the target values of engineering characteristics is a complex decision process with multiple variables and multiple objectives that should trade off, and optimize all kinds of conflicts and constraints. A fuzzy linear programming model （FLP） is proposed. On the basis of the inherent fuzziness of QFD system, triangular fuzzy numbers are used to represent all the relationships and correlations, and then, the functional relationships between the customer needs and engineering characteristics and the functional correlations among the engineering characteristics are determined with the information in the house of quality （HoQ） fully used. The fuzzy linear programming （FLP） model aims to find the optimal target values of the engineering characteristics to maximize the customer satisfaction. Finally, the proposed method is illustrated by a numerical example.展开更多
This paper presents an operational framework of unstructured decision-making approach involving quality function deployment(QFD)in an uncertain linguistic context.Firstly,QFD is extended to the multi-enterprise paradi...This paper presents an operational framework of unstructured decision-making approach involving quality function deployment(QFD)in an uncertain linguistic context.Firstly,QFD is extended to the multi-enterprise paradigm in a real-world manufacturing environment.Secondly,hesitant fuzzy linguistic term sets(HFLTSs),which facilitate the management and handling of information equivocality,are designed to construct a house of quality(HoQ)in the product planning process.The technique of computing with words is applied to bridge the gap between mechanisms of the human brain and machine processes with fuzzy linguistic term sets.Thirdly,a multi-enterprise QFD pattern is formulated as an unstructured decision-making problem for alternative infrastructure project selection in a manufacturing organization.The inter-relationships of cooperative partners are directly matched with a back propagation neural network(BPNN)to construct the multi-enterprise manufacturing network.The resilience of the manufacturing organization is considered by formulating an outranking method on the basis of HFLTSs to decide on infrastructure project alternatives.Finally,a real-world example,namely,the prototype manufacturing of an automatic transmission for a vehicle,is provided to illustrate the effectiveness of the proposed decision-making approach.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.52105035 and 52075467)the Natural Science Foundation of Hebei Province of China(Grant No.E2021203109)+1 种基金the State Key Laboratory of Robotics and Systems(HIT)(Grant No.SKLRS-2021-KF-15)the Industrial Robot Control and Reliability Technology Innovation Center of Hebei Province(Grant No.JXKF2105).
文摘As the support mechanism of space-borne antennas,space deployable antenna mechanism belongs to complex multi-closed-loop coupling mechanism,configuration design and dynamic analysis are more difficult than general parallel mechanism.In this paper,an unequal-length scissors mechanism(ULSM)is proposed by changing the position of the internal rotational joint through a basic scissors mechanism.A scissors hoop-rib truss deployable antenna mechanism(SHRTDAM)is constructed by replacing the parabolic rib with the ULSM.Kinematic analysis of SHRTDAM is conducted,and the degree of freedom(DOF)of the whole antenna mechanism is analyzed based on screw theory,the result showed that it has only one DOF.Velocity and acceleration characteristics of SHRTDAM are obtained by the screw derivative and rotation transformation.Based on Lagrange equation,dynamic model of this mechanism is established,the torque required to drive the mechanism is simulated and verified by Adams and MATLAB software.In addition,a ground experiment prototype of 1.5-m diameter was fabricated and a deployment test is conducted,which demonstrated the mobility and deployment performance of the whole mechanism.The mechanism proposed in this paper can provide a good reference for the design and analysis of large aperture space deployable antennas.
基金Projects(50935002, 11002039) supported by the National Natural Science Foundation of ChinaProject(HIT.KLOF.2009062) supported by Key Laboratory Opening Funding of Aerospace Mechanism and Control Technology,Chinasupport by "111 Project" (Grant No.B07018)
文摘The dynamic equivalent continuum modeling method of the mast which is based on energy equivalency principle was investigated. And three kinds of mast dynamic model were established, which were equivalent continuum model, finite element model and simulation model, respectively. The mast frequencies and mode shapes were calculated by these models and compared with each other. The error between the equivalent continuum model and the finite element model is less than 5% when the mast length is longer. Dynamic responses of the mast with different lengths are tested, the mode frequencies and mode shapes are compared with finite element model. The mode shapes match well with each other, while the frequencies tested by experiments are lower than the results of the finite element model, which reflects the joints lower the mast stiffness. The nonlinear dynamic characteristics are presented in the dynamic responses of the mast under different excitation force levels. The joint nonlinearities in the deployable mast are identified as nonlinear hysteresis contributed by the coulomb friction which soften the mast stiffness and lower the mast frequencies.
基金Project(030103) supported by the Weaponry Equipment Pre-Research Key Foundation of ChinaProject(69982009) supported by the National Natural Science Foundation of China
文摘The potential role of formal structural optimization was investigated for designing foldable and deployable structures in this work.Shape-sizing nested optimization is a challenging design problem.Shape,represented by the lengths and relative angles of elements,is critical to achieving smooth deployment to a desired span,while the section profiles of each element must satisfy structural dynamic performances in each deploying state.Dynamic characteristics of deployable structures in the initial state,the final state and also the middle deploying states are all crucial to the structural dynamic performances.The shape was represented by the nodal coordinates and the profiles of cross sections were represented by the diameters and thicknesses.SQP(sequential quadratic programming) method was used to explore the design space and identify the minimum mass solutions that satisfy kinematic and structural dynamic constraints.The optimization model and methodology were tested on the case-study of a deployable pantograph.This strategy can be easily extended to design a wide range of deployable structures,including deployable antenna structures,foldable solar sails,expandable bridges and retractable gymnasium roofs.
基金Sponsored by the 873 Plan by Ministry of Science and Technology of China ( 2006AA12Z1137)CSSAR Innovation Project ( 2007)
文摘The compact ortho-mode transducer (OMT) and compact conical corrugated horn(CCCH) are used as feeding system of the deployable dual polarizing antenna in this paper.A new stricture of double-septum in main wave guide OMT is proposed. The finite difference method in time domain (FDTD) in combination with genetic algorithms(GAs) is used to analysis and optimize this new OMT. The experiment results show that the voltage standing wave ratio (VSWR) of this OMT and feeding system is less than 1.17 in bandwidth; the isolation between the ortho-mode ports is less than -40dB; the cross-polar level of the feed can reach -35dB and the length of the main waveguide can be reduced 50% at least.
文摘As the mining industry continues to expand and international oil prices increase,more rigorous demands are being placed on the design of mining equipment.Given this,there is an urgent need to develop new power-driven mining equipment to solve the problems of high energy consumption and insufficient power coupling of current equipment.This study proposed a design of a hybrid power system for underground Load Haul Dump(LHD).The proposed design integrated Quality Function Deployment(QFD)and Theory of Inventive Problem Solving(TRIZ).It identified 7 user requirements and 10 related technical features,formulated 11 innovative design solutions,and ultimately adopting an electric drive hybrid power scheme.This scheme effectively addressesd power transmission coupling problems and improve the efficiency of loaders.A 6 m³hybrid power loader prototype has been developed,which reduces operational energy consumption and advances the electrification and green,low-carbon evolution of mining equipment.
基金supported by the National Natural Science Foundation of China(72072047)the Fundamental Research Funds for the Central Universities(HIT.HSS.ESD202310)+3 种基金the Research Project on Graduates’Education and Teaching Reform of HIT(23MS011)the research Project on Higher Education of Heilongjiang Higher Education Association(23GJYBC011)the Natural Science Foundation of Shandong Province(ZR2023QG010)the Shandong Philosophy and Social Science Research Project(22CSDJ03).
文摘Resource management must attach importance to effective resource deployment.Aiming at the research of resource deployment system,firstly,as an important factor of resource deployment system,corporate technological innovation social responsibility(CISR)is analyzed.Based on this,this paper constructs a system dynamics model to analyze the changes in resource deployment system affected by CISR.The simulation model is developed using Venism personal learning edition(PLE).The results show that CISR,acted as a new factor affecting the resource deployment system,has a positive effect on resource deployment system performance.Moreover,when CISR exceeds the threshold value,the resource deployment system performance increases significantly faster,reflecting that the resource deployment system becomes more efficient.The results show that the method proposed in this paper is feasible and efficient.This research provides theoretical and practical implications for resource deployment system research.
基金supported by the Chinese Studentship Council(Grant No.201908060224)the National Natural Science Foundation of China (Grant Nos.11872310,11972308)。
文摘In this paper,the design,manufacture and testing of an origami protective shield with a supporting frame structure are presented.It consists of an origami shield surface and a deployable supporting frame structure that needs to be portable and sufficiently stiff.First,for the design of the shield surface,a threestage origami crease pattern is developed to reduce the shield size in the folded state.The shield surface consists of several stiff modular panels and layered with flexible fabric.The modular panels are made of a multi-layer composite where a ceramic layer is made of small pieces to improve durability as those small pieces enable restriction of crack propagation.Then,the supporting frame structure is designed as a chain-of-bars structure in order to fold into a highly compact state as a bundle of bars and deploy in sequence.Thus,a feature-driven topology structural optimization method preserving component sequence is developed where the inter-dependence of sub-structures is taken into account.A bar with semi-circular ends is used as a basic design feature.The positions of the bar’s end points are treated as design variables and the width of the bars is kept constant.Then,a constraint on the total length of the chain of bars is introduced.Finally,the modular panels made of multi-layer composite and the full-scale prototype of the origami shield are fabricated and tested to verify the bullet-proof performance.
基金supported by the National Natural Science Foundation of China(Grant No.U21B2075)。
文摘Dynamic analysis of the tethered satellite system(TSS)can provide a fundamental guideline to the evaluation of performance and robust design of the system examined.Uncertainties inherited with the parameters would induce unexpected variation of the response and deteriorate the reliability of the system.In this work,the effect of uncertain mass of the satellites on the deployment and retrieval dynamics of the TSS is investigated.First the interval mode is employed to take the variation of mass of satellite into account in the processes of deployment and retrieval.Then,the Chebyshev interval method is used to obtain the lower and upper response bounds of the TSS.To achieve a smooth and reliable implementation of deployment and retrieval,the nonlinear programming based on the Gauss pseudospectral method is adopted to obtain optimal trajectory of tether velocity.Numerical results show that the uncertainties of mass of the satellites have a distinct influence on the response of tether tension in the processes of deployment and retrieval.
基金the National Natural Science Foundation of China(Grant No.42174047 and No.42174036)the National Science Foundation Project for Outstanding Youth(No.42104034).
文摘This paper realizes the full-domain collaborative deployment of multiple interference sources of the global satellite navigation system(GNSS)and evaluates the deployment effect to enhance the ability to disturb the attacker and the capability to defend the GNSS during navigation countermeasures.Key evaluation indicators for the jamming effect of GNSS suppressive and deceptive jamming sources are first created,their evaluation models are built,and their detection procedures are sorted out,as the basis for determining the deployment principles.The principles for collaboratively deploying multi-jamming sources are developed to obtain the deployment structures(including the required number,structures in demand,and corresponding positions)of three single interference sources required by collaboratively deploying.Accordingly,simulation and hardware-in-loop testing results are presented to determine a rational configuration of the collaborative deployment of multi-jamming sources in the set situation and further realize the full-domain deployment of an interference network from ground,air to space.Varied evaluation indices for the deployment effect are finally developed to evaluate the deployment effect of the proposed configuration and further verify its reliability and rationality.
文摘Sensors deployment optimization has become one of the most attractive fields in recent years. However, most of the previous work focused on the deployment problem in 2D space.Compared to the traditional form, sensors deployment in multidimensional space has greater research significance and practical potential to satisfy the detecting needs in complex environment.Aiming at solving this issue, a multi-dimensional space sensor network model is established, and the radar system is selected as an example. Considering the possible working mode of the radar system(e.g., searching and tracking), two distinctive deployment models are proposed based on maximum coverage area and maximum target detection probability in the attack direction respectively. The latter one is usually ignored in the previous literature.For uncovering the optimal deployment of the sensor network, the particle swarm optimization(PSO) algorithm is improved using the proposed weights determination scheme, in which the linear decreasing, the pooling strategy and the cloud theory are combined for weights updating. Experimental results illustrate the effectiveness of the proposed method.
基金supported by the Education Science Fund of the Military Science Institute of Beijing,China(2015JY320)
文摘In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support provided by wartime military material support powers can be more effective. When the principles,requirements, influencing factors and goals of military material support forces are deployed in wartime, an evaluation indicator system is established. Thus, a new combined empowerment method based on an analytic hierarchy process（AHP） is developed to calculate the subjective weights, and the rough entropy method is used to calculate the objective weights. Combination weights can be obtained by calculating the weight preference coefficient error, which is determined by combining the cooperative game method and the minimum deviation into objectives. This approach can determine the grey relation projection coefficient and synthesize the measure scheme superiority to finally optimize the deployment plan using the grey relation projection decision-making method. The results show that the method is feasible and effective;it can provide a more scientific and practical decision-making basis for the military material support power deployment in wartime.
基金supported by the National Outstanding Youth Science Foundation (60925011)the National Natural Science Foundation of China (61203181)
文摘With applying the information technology to the military field, the advantages and importance of the networked combat are more and more obvious. In order to make full use of limited battlefield resources and maximally destroy enemy targets from arbitrary angle in a limited time, the research on firepower nodes dynamic deployment becomes a key problem of command and control. Considering a variety of tactical indexes and actual constraints in air defense, a mathematical model is formulated to minimize the enemy target penetration probability. Based on characteristics of the mathematical model and demands of the deployment problems, an assistance-based algorithm is put forward which combines the artificial potential field （APF） method with a memetic algorithm. The APF method is employed to solve the constraint handling problem and generate feasible solutions. The constrained optimization problem transforms into an optimization problem of APF parameters adjustment, and the dimension of the problem is reduced greatly. The dynamic deployment is accomplished by generation and refinement of feasible solutions. The simulation results show that the proposed algorithm is effective and feasible in dynamic situation.
基金Project(2006AA09Z240) supported by the National High Technology Research and Development Program of China Project(DYXM 115-04-02-01) supported by the National Deep-Sea Technology Program of Development and Research of the Eleventh Five-year Plan of China
文摘The hydrodynamic problem of a two-dimensional model of seafloor mining tool entering still water vertically at constant speed was analyzed based on the velocity potential theory. For the assumption that the water entry occurs with very short time interval, the viscosity and gravity of fluid were neglected. Considering the characteristic shape of it, the seafloor mining tool was simplified as a flat-bottom body. The governing equations were the Reynolds time-averaged equations and the k-e model. Finite element analysis was undertaken using the CFD software, Fluent. The impact pressures on the bottom of the mining tool were computed based on the improved volume of fuid method （VOF）. The pressure distribution, the maximum impact pressure, and the impact duration time during the water entry of mining tool are presented at various deploying velocities, the two peak pressures in the impact process are observed, and the relationship between the maximum impact pressure and the deploying velocity is obtained. The results are compared with those based on other prediction theories and methods.
基金supported by the National Natural Science Foundation for Youth of China(61802174)the Natural Science Foundation for Youth of Jiangsu Province(BK20181016)+1 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(18KJB520019)the Scientific Research Foundation of Nanjing Institute of Technology of China(YKJ201614)
文摘In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to evaluate the maturity degree of the solution, and the evaluation results can help to manage and control the development process. Furthermore, a fuzzy evaluation method based on the minimum deviation is proposed to deal with the fuzzy information. The quantitative evaluation result of the maturity degree can be calculated by optimizing the semantic discount factor aim for the minimum deviation. Finally, this model is illustrated and analyzed by an example study of the aircraft collaborative design software.
基金supported by the Fundamental Research Funds for the Central Universities(K5051399035BDY251412+1 种基金JB150601)the Soft Science Project of Shaanxi Province(2013KRZ25)
文摘Quality function deployment （QFD） is a well-known customer-oriented product design methodology. Rating the final importance of customer requirements （CRs） is really a very es- sential starting point in the implementation of QFD, since it largely affects the target setting value of design requirements. This pa- per aims to propose a novel method to deal with the relative importance ratings （RIRs） of CRs problem considering customers＇ diversified requirements and unknown information on customers＇ weights, which is an indispensable process for determining the final importance ratings of CRs. First, a new concept of customer＇s assessment structure is proposed according to the basic idea of grey relational analysis （GRA）, and then a constrained nonlinear optimization model is constructed to describe the assessment information aggregation factors of CRs considering customers＇ personalized and diversified requirements. Furthermore, an im- mune particle swarm optimization （IPSO） algorithm is designed to solve the model, and the weight vector of customers is obtained. Finally, a car door design example is introduced to illustrate the novel hybrid GRA-IPSO method＇s potential application in deter- mining the RIRs of CRs.
基金supported by the Natural Science Foundation of Shaanxi Province,China(2020JQ-288)Science and Technology on Space Intelligent Control Laboratory,China(HTKJ2019KL502016)+1 种基金China Scholarship Council(201806120093)National Natural Science Foundation of China(61903289).
文摘The tether deployment of a tethered satellite system involves the consideration of complex dynamic properties of the tether,such as large deformation,slack,and even rebound,and therefore,the dynamic modelling of the tether is necessary for performing a dynamic analysis of the system.For a variablelength tether element,the absolute nodal coordinate formulation(ANCF)in the framework of the arbitrary Lagrange-Euler(ALE)description was used to develop a precise dynamic model of a tethered satellite.The model considered the gravitational gradient force and Coriolis force in the orbital coordinate frame,and it was validated through numerical simulation.In the presence of dynamic constraints,a deployment velocity of the tether was obtained by an optimal procedure.In the simulation,rebound behavior of the tethered satellite system was observed when the ANCF-ALE model was employed.Notably,the rebound behavior cannot be predicted by the traditional dumbbell model.Furthermore,an improved optimal deployment velocity was developed.Simulation results indicated that the rebound phenomenon was eliminated,and smooth deployment as well as a stable state of the station-keeping process were achieved.Additionally,the swing amplitude in the station-keeping phase decreased when a deployment strategy based on the improved optimal deployment velocity was used.
基金supported by the National Natural Science Foundation of China (61971470)。
文摘To address the problem of building linear barrier coverage with the location restriction, an optimization method for deploying multistatic radars is proposed, where the location restriction splits the deployment line into two segments. By proving the characteristics of deployment patterns, an optimal deployment sequence consisting of multiple deployment patterns is proposed and exploited to cover each segment. The types and numbers of deployment patterns are determined by an algorithm that combines the integer linear programming(ILP)and exhaustive method(EM). In addition, to reduce the computation amount, a formula is introduced to calculate the upper threshold of receivers’ number in a deployment pattern. Furthermore, since the objective function is non-convex and non-analytic, the overall model is divided into two layers concerning two suboptimization problems. Subsequently, another algorithm that integrates the segments and layers is proposed to determine the deployment parameters, such as the minimum cost, parameters of the optimal deployment sequence, and the location of the split point. Simulation results demonstrate that the proposed method can effectively determine the optimal deployment parameters under the location restriction.
基金supported by the National Natural Science Foundation of China (70571041).
文摘In the implementation of quality function deployment （QFD）, the determination of the target values of engineering characteristics is a complex decision process with multiple variables and multiple objectives that should trade off, and optimize all kinds of conflicts and constraints. A fuzzy linear programming model （FLP） is proposed. On the basis of the inherent fuzziness of QFD system, triangular fuzzy numbers are used to represent all the relationships and correlations, and then, the functional relationships between the customer needs and engineering characteristics and the functional correlations among the engineering characteristics are determined with the information in the house of quality （HoQ） fully used. The fuzzy linear programming （FLP） model aims to find the optimal target values of the engineering characteristics to maximize the customer satisfaction. Finally, the proposed method is illustrated by a numerical example.
基金supported by the National Key Research and Development Program of China(2016YFD0700605)the National Natural Science Foundation of China(51875151)Hefei Municipal Natural Science Foundation(2021029)。
文摘This paper presents an operational framework of unstructured decision-making approach involving quality function deployment(QFD)in an uncertain linguistic context.Firstly,QFD is extended to the multi-enterprise paradigm in a real-world manufacturing environment.Secondly,hesitant fuzzy linguistic term sets(HFLTSs),which facilitate the management and handling of information equivocality,are designed to construct a house of quality(HoQ)in the product planning process.The technique of computing with words is applied to bridge the gap between mechanisms of the human brain and machine processes with fuzzy linguistic term sets.Thirdly,a multi-enterprise QFD pattern is formulated as an unstructured decision-making problem for alternative infrastructure project selection in a manufacturing organization.The inter-relationships of cooperative partners are directly matched with a back propagation neural network(BPNN)to construct the multi-enterprise manufacturing network.The resilience of the manufacturing organization is considered by formulating an outranking method on the basis of HFLTSs to decide on infrastructure project alternatives.Finally,a real-world example,namely,the prototype manufacturing of an automatic transmission for a vehicle,is provided to illustrate the effectiveness of the proposed decision-making approach.
