The structure of a steel changes with temperature due to phase transformations. This phase change is generally companied by a variation in the specific volume which is exhibited as a departure from the behaviour of th...The structure of a steel changes with temperature due to phase transformations. This phase change is generally companied by a variation in the specific volume which is exhibited as a departure from the behaviour of the thermal expansion or contraction, at the temperature at which the change occurs. This behaviour can be detected as a change in the dimensions of a suitable test piece, and forms the operating principle of dilatometry. The dilatometric technique may be applicable to the investigation of the phase transformation kinetics if the relation between the fractions of phases, the temperature, the compositions of phases and the dilatation can be built up. Efforts have been made to analyze the dilatation during an isothermal transformation or to calculate the dilatation during the heating of plain carbon steels using the thermodynamic function. The existing models are, however, not directly applicable to the determination of the phase transformation kinetics from a dilatation curve. A detailed analysis has been made of the length change of a hypoeutectoid steel during a continuous cooling. A model has been developed in which the transient dilatation is calculated based on the fraction of the phases present. The model takes into account the redistribution of carbon and is applicable to the determination of the phase transformation kinetics from the dilatation data during a cooling of a hypo-eutectoid steel. The model was validated by comparing the model results with the experimental results of an interstitial free steel. Experiments have been done with an interstitial-free steel and a C-Mn steel. The model has been applied to the calculation of the transformation kinetics indicated by the dilatation curves. Excellent agreements between the model and the experiments have been obtained.展开更多
Background Left ventricular dilatation and a decreased ejection fraction is one of the most serious complications in patients with Takayasu arteritis(TA).We aim to describe the prevalence,clinical features,treatment,a...Background Left ventricular dilatation and a decreased ejection fraction is one of the most serious complications in patients with Takayasu arteritis(TA).We aim to describe the prevalence,clinical features,treatment,and long-term prognosis of TA patients with this complication.展开更多
Dilatancy is a fundamental volumetric growth behavior observed during loading and serves as a key index to comprehending the intricate nonlinear behavior and constitutive equation structure of rock.This study focuses ...Dilatancy is a fundamental volumetric growth behavior observed during loading and serves as a key index to comprehending the intricate nonlinear behavior and constitutive equation structure of rock.This study focuses on Jinping marble obtained from the Jinping Underground Laboratory in China at a depth of 2400 m.Various uniaxial and triaxial tests at different strain rates,along with constant confining pressure tests and reduced confining pressure tests under different confining pressures were conducted to analyze the mechanical response and dilatancy characteristics of the marble under four stress paths.Subsequently,a new empirical dilatancy coefficient is proposed based on the energy dissipation method.The results show that brittle failure characteristics of marble under uniaxial compression are more obvious with the strain rate increasing,and plastic failure characteristics of marble under triaxial compression are gradually strengthened.Furthermore,compared to the constant confining pressure,the volume expansion is relatively lower under unloading condition.The energy dissipation is closely linked to the process of dilatancy,with a rapid increase of dissipated energy coinciding with the beginning of dilatancy.A new empirical dilatancy coefficient is defined according to the change trend of energy dissipation rate curve,of which change trend is consistent with the actual dilatancy response in marble under different stress paths.The existing empirical and theoretical dilatancy models are analyzed,which shows that the empirical dilatancy coefficient based on the energy background is more universal.展开更多
Blasting-induced cracks in the rock surrounding deeply buried tunnels can result in water gushing and rock mass collapse,posing significant safety risks.However,previous theoretical studies on the range of blasting-in...Blasting-induced cracks in the rock surrounding deeply buried tunnels can result in water gushing and rock mass collapse,posing significant safety risks.However,previous theoretical studies on the range of blasting-induced cracks often ignore the impact of the in-situ stress,especially that of the intermediate principal stress.The particle displacement−crack radius relationship was established in this paper by utilizing the blasthole cavity expansion equation,and theoretical analytical formulas of the stress−displacement relationship and the crack radius were derived with unified strength theory to accurately assess the range of cracks in deep surrounding rock under a blasting load.Parameter analysis showed that the crushing zone size was positively correlated with in-situ stress,intermediate principal stress,and detonation pressure,whereas negatively correlated with Poisson ratio and decoupling coefficient.The dilatancy angle-crushing zone size relationship exhibited nonmonotonic behavior.The relationships in the crushing zone and the fracture zone exhibited opposite trends under the influence of only in-situ stress or intermediate principal stress.As the in-situ stress increased from 0 to 70 MPa,the rate of change in the crack range and the attenuation rate of the peak vibration velocity gradually slowed.展开更多
For shallow tunnels of single-lane railway and four-lane road,numerical simulation using finite differential code was conducted.The mechanical behavior of loose rock masses was studied considering the influences of sh...For shallow tunnels of single-lane railway and four-lane road,numerical simulation using finite differential code was conducted.The mechanical behavior of loose rock masses was studied considering the influences of shear dilation on the shape of the failure surface for the shallow tunnels,and the break angles using numerical simulation was compared with those using the Rankine's analytical solutions and design code.From the comparisons,it is found that the difference between the break angle by numerical simulation and the design code is small when the shear dilation angle is equal to 0,with the maximum relative difference being less than 0.2% in road tunnels.With the dilation angle's increase,the loose plasticity zone area of surrounding rock reduces obviously,and the break angle increases gradually.When the dilation angle is equal to the internal friction angle,the materials follow associated flow rule,and the numerical solution of the break angle is larger than the analytical solution,with the maximum relative difference being greater than 16.7% in road tunnels.Therefore,associated flow rule leads to overestimating break angle,and the dilation angle has an important influence on the failure surface shape for shallow tunnels in the loose surrounding rocks.展开更多
The author has observed the epithelium and basement membrane of uterus, oviduct and fimbriae in mice under the TEM by oral administration of AgNo<sub>3</sub> tracer. The results showed that there was obvio...The author has observed the epithelium and basement membrane of uterus, oviduct and fimbriae in mice under the TEM by oral administration of AgNo<sub>3</sub> tracer. The results showed that there was obvious deposit of argentum granules outside the basement membrane of mucosal epithelium of the uterus, oviduct and fimbriae as well as outside the basement membrane of uterine glands. And there was dilatation fully filled with high electron-dense argentum granules at the intercellular space just beneath the tight junction between the mucosal epithelial cells of uterus, oviduet, fimbriae. All these finding suggest that the uterus, oviduct and fimbriae serve as barriers to the heavy metal argentum ions.展开更多
In deep underground mining, the surrounding rocks are very soft with high stress. Their deformation and destruction are serious, and frequent failures occur on the bolt support. The failure mechanism of bolt support i...In deep underground mining, the surrounding rocks are very soft with high stress. Their deformation and destruction are serious, and frequent failures occur on the bolt support. The failure mechanism of bolt support is proposed to solve these problems. A calculation theory is established on the bond strength of the interface between the anchoring agent and surrounding rocks. An analysis is made on the influence law of different mechanical parameters of surrounding rocks on the interfacial bond strength. Based on the research, a new high-strength bolt-grouting technology is developed and applied on site. Besides, some helpful engineering suggestions and measures are proposed. The research shows that the serious deformation and failure, and the lower bond strength are the major factors causing frequent failures of bolt support. So, the bolt could not give full play to its supporting potential. It is also shown that as the integrity, strength, interface dilatancy and stress of surrounding rocks are improved, the bond strength will increase. So, the anchoring force on surrounding rocks can be effectively improved by employing an anchoring agent with high sand content, mechanical anchoring means, or grouting reinforcement. The new technology has advantages in a high strength, imposing pre-tightening force, and giving full play to the bolt supporting potential. Hence, it can improve the control effect on surrounding rocks. All these could be helpful references for the design of bolt support in deep underground mines.展开更多
The closed form solutions of the stress and displacement in strain softening rock mass around a newly formed cavity are derived with a three step-wise elasto-plastic model. Hoek-Brown criterion is adopted as the yield...The closed form solutions of the stress and displacement in strain softening rock mass around a newly formed cavity are derived with a three step-wise elasto-plastic model. Hoek-Brown criterion is adopted as the yielding criterion of rock mass. Damage factors are proposed to account for degradation of the material parameters to reflect the degree of strain softening. The surrounding rock mass around the cavity is divided into three regions: elastic region, strain softening region and residual state region. The analytical solutions of stress, strain, displacement and radius of each region are obtained. The effects of the strain softening and shear dilatancy behavior on the results are investigated with parametric studies. The results show that the radii of the residual state region and strain softening region in the surrounding rock mass with higher damage degree are larger. The radii of the residual state region and strain softening region are 1-2 times and 1.5-3 times of the cavity radius, respectively. The radial and tangential stresses decrease with the increase of the damage factor. The displacement of the cavity wall for the case with maximum plastic bulk strain is nearly twice than that with no dilation. Rock mass moves more toward the center for the case with larger damage factor and shear dilation. The area of the plastic region is larger when the damage factors are considered. The displacements in the surrounding rock mass increase with the increase of the damage factors and shear dilation factors. The solutions can be applied to the stability analysis and support design of the underground excavation.展开更多
The predictive capacity of numerical analyses in geotechnical engineering depends strongly on the efficiency of constitutive models used for modeling of interfaces behavior.Interfaces are considered as thin layers of ...The predictive capacity of numerical analyses in geotechnical engineering depends strongly on the efficiency of constitutive models used for modeling of interfaces behavior.Interfaces are considered as thin layers of the soil adjacent to structures boundary whose major role is transferring loads from structures to soil masses.An interface model within the bounding surface plasticity framework and the critical state soil mechanics is presented.To this aim,general formulation of the interface model according to the bounding surface plasticity theory is described first.Similar to granular soils,it has been shown that the mechanical behavior of sand-structure interfaces is highly affected by the interface state that is the combined influences of density and applied normal stress.Therefore,several ingredients of the model are directly related to the interface state.As a result of this feature,the model is enabled to distinguish interfaces in dense state from those in loose state and to provide realistic predictions over wide ranges of density and normal stress values.In evaluation of the model,a reasonable correspondence between the model predictions and the experimental data of various research teams is found.展开更多
Surrounding rocks of weakly consolidated soft rock roadway show obvious strain softening and dilatancy effects after excavation. A damage coefficient concerning modulus attenuation was defined. Response models of stre...Surrounding rocks of weakly consolidated soft rock roadway show obvious strain softening and dilatancy effects after excavation. A damage coefficient concerning modulus attenuation was defined. Response models of stress and displacement of surrounding rock of soft rock roadway and analytical expressions to calculate plastic zones under different interior pressures and non-uniform original rock stresses were derived based on damage theories and a triple linear elastic-plastic strain softening model. Influence laws of dilatancy gradient on damage development, distributions of stresses and displacement in plastic region were analyzed. Interior pressure conditions to develop plastic region under different origin rock stresses were established and their influences on plastic region distribution were also discussed. The results show that the order of maximum principle stress is exchanged between ~0 and trr with the increase of interior pressure P0, which causes distributions of plastic zone and stress shift. Dilatancy effect which has great influences on the damage propagation and displacements in plastic region has little effect on the size of plastic region and stress responses. The conclusions provide a theoretical basis for a reasonable evaluation of stability and effective supporting of weakly consolidated soft rock roadway.展开更多
Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sa...Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sand under monotonic loading when the similarity-ratio equals to unity. The characteristics of the model are as follows: 1) A reverse bullet-shaped yield surface is adopted to ensure accurate prediction of the behavior of sand, instead of bullet-shaped or elliptical yield surface in Cam-Clay model. 2) No unique relationship between void ratio and the mean normal stress for sand prevents the direct coupling of yield surface size to void ratio, so incremental deviatoric strain hardening rule is used. 3) The model combines the concept of state-dependent dilatancy by incorporating state parameter in Rowe's stress dilatancy equation, which accounts for the dependence of dilatancy on the stress state and the material internal state. A single set of model constants, which is calibrated, can simulate stress-strain response under different initial void ratios and different confine pressures. The model is validated true by comparing predicted results with experimental results under monotonic and cyclic loading conditions.展开更多
Dilation angle is a significant parameter needed for numerical simulation of tunnels.Even though dilation parameter is physically variable and dependent on confinement and experienced shear plastic strain based on the...Dilation angle is a significant parameter needed for numerical simulation of tunnels.Even though dilation parameter is physically variable and dependent on confinement and experienced shear plastic strain based on the existing dilation models,numerical simulations of tunnels and underground openings with constant dilation parameter usually lead to satisfactory results in practical use.This study aims to find out why constant dilation angle is enough under practical conditions to simulate numerically tunnels and underground excavations in spite of the fact that dilation angle is variable in laboratory and experimental scale.With this aim,this work studies how mobilized dilation angle varies in a plastic zone surrounding a tunnel.For the circular tunnel under uniform in situ stress field,the stepwise finite difference approximation analytical solution considering strain softening rock mass behavior with mobilized dilation angle was used to study how mobilized dilation angle varies in plastic zone around tunnel under very different conditions.In practical conditions determined in this study,dilative behavior of all over the plastic zone around the tunnel can be approximated to constant dilation angle in the middle region of the plastic zone.Moreover,the plastic zone displacements for mobilized and constant dilation angle models are compared with each other.Further investigation under more general non-uniform in situ stress conditions and non-circular tunnels is performed by using the commercial finite difference software to numerically simulate the Mine-by experimental tunnel of AECL(Atomic Energy of Canada Limited)and the arched tunnel.Although the Mine-by and arched tunnels were numerically simulated based on the mobilized dilation angle model,the variability associated with dilation angle around the simulated Mine-by and arched tunnels is insignificant,and dilation angle is approximately constant in the plastic zone.展开更多
A revised displacement discontinuity method(DDM) program is developed for the simulation of rock joint propagation and dilatancy analysis. The non-linear joint model used in the program adopts Barton-Bandis normal def...A revised displacement discontinuity method(DDM) program is developed for the simulation of rock joint propagation and dilatancy analysis. The non-linear joint model used in the program adopts Barton-Bandis normal deformation model, Kulhaway shear deformation model and Mohr-Coulomb criterion. The joint propagation criterion is based on the equivalent stress intensity factor which can be obtained by regression analysis. The simulated rock joint propagation accords well with the existing knowledge. The closure and opening of joint is investigated by DDM, and it is shown that if the opening volume of propagated joint is larger than closure volume of the old joint, the joint dilatancy occurs. The dilatancy condition is mainly controlled by the normal stiffness of the rock joint. When the normal stiffness is larger than the critical value, joint dilatancy occurs. The critical normal stiffness of rock joint changes with the joint-load angle, and joint dilatancy is most possible to occur at 30°.展开更多
The understanding of the rock deformation and failure process and the development of appropriate constitutive models are the basis for solving problems in rock engineering. In order to investigate progressive failure ...The understanding of the rock deformation and failure process and the development of appropriate constitutive models are the basis for solving problems in rock engineering. In order to investigate progressive failure behavior in brittle rocks, a modified constitutive model was developed which follows the principles of the continuum damage mechanics method. It incorporates non-linear Hoek-Brown failure criterion, confining pressure-dependent strength degradation and volume dilation laws, and is able to represent the nonlinear degradation and dilation behaviors of brittle rocks in the post-failure region. A series of triaxial compression tests were carried out on Eibenstock(Germany) granite samples. Based on a lab data fitting procedure, a consistent parameter set for the modified constitutive model was deduced and implemented into the numerical code FLAC3 D. The good agreement between numerical and laboratory results indicates that the modified constitutive law is well suited to represent the nonlinear mechanical behavior of brittle rock especially in the post-failure region.展开更多
A new double-yield-sarface （DYS） model was developed to characterize the strength and deformation behaviors of coarse granular materials （CGMs）. Two kinds of deformation mechanisms, including the shear and compres...A new double-yield-sarface （DYS） model was developed to characterize the strength and deformation behaviors of coarse granular materials （CGMs）. Two kinds of deformation mechanisms, including the shear and compressive plastic deformation, were taken into account in this model, These two deformation mechanisms were described by the shear and compressive yield functions, respectively. The Lode angle dependent formulations of proposed model were deduced by incorporating a 3D nonlinear unified failure criterion. Some comparisons were presented between the numerical predictions of proposed model and test data of true triaxial tests on the modeled rockfills. The model predictions are in good agreement with the test data and capture the strain hardening and plastic volumetric dilation of CGMs. These findings verify the reasonability of current DYS model, and indicate that this model is well suited to reproduce the stress-strain-volume change behavior of CGMs in general.展开更多
By using large scale triaxial shearing apparatus,consolidated-drained shear tests were conducted on coarse-grained soil with different gradations.In order to describe their deformation rules,three main characteristics...By using large scale triaxial shearing apparatus,consolidated-drained shear tests were conducted on coarse-grained soil with different gradations.In order to describe their deformation rules,three main characteristics of tangent Poisson ratio curves were summarized and the reason was revealed by dividing the movement of soil particles into two kinds: the movement of fine particles and the movement of coarse particles.Then,a volumetric strain expression and a tangent Poisson ratio expression were put forward,and two defects of widely used Duncan-Chang model were fixed.Results calculated from them agree well with test results.There are three parameters,namely L,G and F,in this new model.Parameter L reflects the dilatancy of a specimen and L=4 can be used as a criterion to estimate whether a certain kind of soil has dilatancy quality or not.Parameters G and F relate to the initial slope of tangent Poisson ratio curves,and G=F=0 indicates a special situation which happens in dense granular material of the same diameter.Influences of various gradations on volume deformation are mainly reflected in parameter L which is smaller when there are more gravels in specimens.展开更多
Considering the fact that in some complex cases,plate anchors are buried in multi-layered geotechnical materials,the ultimate dynamic analysis was performed to investigate the uplift capacity and failure mechanism of ...Considering the fact that in some complex cases,plate anchors are buried in multi-layered geotechnical materials,the ultimate dynamic analysis was performed to investigate the uplift capacity and failure mechanism of shallow strips and circular plate anchors in multi-layered soils.The nonlinear strength criterion and non-associated flow rule of geotechnical materials were introduced to investigate the influence of nonuniformity on the pullout performance and failure mechanism of shallow plate anchors.The expressions of the detaching curves or surfaces were obtained to reflect the failure mechanism,which can be used to figure out the ultimate uplift capacity and failure range.The results are generally in agreement with the numerical simulations and previous research.The effects of various parameters on the ultimate uplift capacity and failure mechanism of plate anchors in multi-layered soils were investigated,and it is found that the ultimate uplift capacity and failure range of shallow anchors increase with the increase of initial cohesion and dilatancy coefficient,but decrease with the unit weight,axial tensile stress and nonlinear coefficient.展开更多
Based on Mohr-Coulomb （M-C） criterion, the parameters of Druker-Prager （D-P） criterion for geomaterial were determined under non-associated flow rule, and thus a new D-P type criterion was presented. Two assumptio...Based on Mohr-Coulomb （M-C） criterion, the parameters of Druker-Prager （D-P） criterion for geomaterial were determined under non-associated flow rule, and thus a new D-P type criterion was presented. Two assumptions were employed during the derivation： 1） principal strains by M-C model and D-P model are equal, and 2） the material is under plane strain condition. Based on the analysis of the surface on rt plane, it is found that the proposed D-P type criterion is better than the D-P criterion with M-C circumscribed circle or M-C inscribed circle, and is applicable for stress Lode angle less than zero. By comparing the predicted results with the test data of sand under plane strain condition and other D-P criteria, the proposed criterion is verified and agrees well with the test data, which is further proved to be better than other D--P type criteria in certain range of Lode angle. The criterion was compiled into a finite difference package FLAC3D by user-subroutine, and was used to analyze the stability of a slope by strength reduction method. The predicted slope safety factor from the proposed criterion agrees well with that by Spencer method, and it is more accurate than that from classic D-P criteria.展开更多
The mechanical behaviors of the interface between coarse-grained soil and concrete were investigated by simple shear tests under condition of mixed soil slurry (bentonite mixed with cement grout).For comparison,the in...The mechanical behaviors of the interface between coarse-grained soil and concrete were investigated by simple shear tests under condition of mixed soil slurry (bentonite mixed with cement grout).For comparison,the interfaces both without slurry and with bentonite slurry were analyzed.The experimental results show that different slurries exert much influence on the strength and deformation of soil/structure interface.Under mixed soil slurry,strain softening and shear dilatation are observed,while shear dilatation appears under the small normal stress of the interface without slurry,and shear contraction is significant under the condition of the bentonite slurry.The thickness of the interface was determined by analyzing the disturbed height of the sample with both simple shear test and particle flow code (PFC).An elasto-plastic constitutive model incorporating strain softening and dilatancy for thin layer element of interface was formulated in the framework of generalized potential theory.The relation curves of shear stress and shear strain,as well as the relation curves of normal strain and shear strain,were fitted by a piecewise function composed by hyperbolic functions and resembling normal functions.The entire model parameters can be identified by tests.The new model is verified by comparing the measured data of indoor cut-off wall model tests with the predictions from finite element method (FEM).The FEM results indicate that the stress of wall calculated by using Goodman element is too large,and the maximum deviation between the test data and prediction is about 45%.While the prediction from the proposed model is close to the measured data,and the error is generally less than 10%.展开更多
文摘The structure of a steel changes with temperature due to phase transformations. This phase change is generally companied by a variation in the specific volume which is exhibited as a departure from the behaviour of the thermal expansion or contraction, at the temperature at which the change occurs. This behaviour can be detected as a change in the dimensions of a suitable test piece, and forms the operating principle of dilatometry. The dilatometric technique may be applicable to the investigation of the phase transformation kinetics if the relation between the fractions of phases, the temperature, the compositions of phases and the dilatation can be built up. Efforts have been made to analyze the dilatation during an isothermal transformation or to calculate the dilatation during the heating of plain carbon steels using the thermodynamic function. The existing models are, however, not directly applicable to the determination of the phase transformation kinetics from a dilatation curve. A detailed analysis has been made of the length change of a hypoeutectoid steel during a continuous cooling. A model has been developed in which the transient dilatation is calculated based on the fraction of the phases present. The model takes into account the redistribution of carbon and is applicable to the determination of the phase transformation kinetics from the dilatation data during a cooling of a hypo-eutectoid steel. The model was validated by comparing the model results with the experimental results of an interstitial free steel. Experiments have been done with an interstitial-free steel and a C-Mn steel. The model has been applied to the calculation of the transformation kinetics indicated by the dilatation curves. Excellent agreements between the model and the experiments have been obtained.
文摘Background Left ventricular dilatation and a decreased ejection fraction is one of the most serious complications in patients with Takayasu arteritis(TA).We aim to describe the prevalence,clinical features,treatment,and long-term prognosis of TA patients with this complication.
基金Project(2022NSFSC0279)supported by the General Project of Sichuan Natural Science Foundation,ChinaProject(Z17113)supported by the Key Scientific Research Fund of Xihua University,ChinaProject(SR21A04)supported by the Research Center for Social Development and Social Risk Control of Sichuan Province,Key Research Base of Philosophy and Social Sciences,Sichuan University,China。
文摘Dilatancy is a fundamental volumetric growth behavior observed during loading and serves as a key index to comprehending the intricate nonlinear behavior and constitutive equation structure of rock.This study focuses on Jinping marble obtained from the Jinping Underground Laboratory in China at a depth of 2400 m.Various uniaxial and triaxial tests at different strain rates,along with constant confining pressure tests and reduced confining pressure tests under different confining pressures were conducted to analyze the mechanical response and dilatancy characteristics of the marble under four stress paths.Subsequently,a new empirical dilatancy coefficient is proposed based on the energy dissipation method.The results show that brittle failure characteristics of marble under uniaxial compression are more obvious with the strain rate increasing,and plastic failure characteristics of marble under triaxial compression are gradually strengthened.Furthermore,compared to the constant confining pressure,the volume expansion is relatively lower under unloading condition.The energy dissipation is closely linked to the process of dilatancy,with a rapid increase of dissipated energy coinciding with the beginning of dilatancy.A new empirical dilatancy coefficient is defined according to the change trend of energy dissipation rate curve,of which change trend is consistent with the actual dilatancy response in marble under different stress paths.The existing empirical and theoretical dilatancy models are analyzed,which shows that the empirical dilatancy coefficient based on the energy background is more universal.
基金Project(2021JJ10063)supported by the Natural Science Foundation of Hunan Province,ChinaProject(202115)supported by the Science and Technology Progress and Innovation Project of Hunan Provincial Department of Transportation,ChinaProject(2021K094-Z)supported by the Science and Technology Research and Development Program of China Railway Guangzhou Group Co.,Ltd。
文摘Blasting-induced cracks in the rock surrounding deeply buried tunnels can result in water gushing and rock mass collapse,posing significant safety risks.However,previous theoretical studies on the range of blasting-induced cracks often ignore the impact of the in-situ stress,especially that of the intermediate principal stress.The particle displacement−crack radius relationship was established in this paper by utilizing the blasthole cavity expansion equation,and theoretical analytical formulas of the stress−displacement relationship and the crack radius were derived with unified strength theory to accurately assess the range of cracks in deep surrounding rock under a blasting load.Parameter analysis showed that the crushing zone size was positively correlated with in-situ stress,intermediate principal stress,and detonation pressure,whereas negatively correlated with Poisson ratio and decoupling coefficient.The dilatancy angle-crushing zone size relationship exhibited nonmonotonic behavior.The relationships in the crushing zone and the fracture zone exhibited opposite trends under the influence of only in-situ stress or intermediate principal stress.As the in-situ stress increased from 0 to 70 MPa,the rate of change in the crack range and the attenuation rate of the peak vibration velocity gradually slowed.
基金Project (200631878557) supported by West Traffic of Science and Technology of ChinaProject (200550) supported by the Foundation for the Author of National Excellent Doctoral Dissertation of ChinaProject (05-0686) supported by the Program for New Century Excellent Talents in University
文摘For shallow tunnels of single-lane railway and four-lane road,numerical simulation using finite differential code was conducted.The mechanical behavior of loose rock masses was studied considering the influences of shear dilation on the shape of the failure surface for the shallow tunnels,and the break angles using numerical simulation was compared with those using the Rankine's analytical solutions and design code.From the comparisons,it is found that the difference between the break angle by numerical simulation and the design code is small when the shear dilation angle is equal to 0,with the maximum relative difference being less than 0.2% in road tunnels.With the dilation angle's increase,the loose plasticity zone area of surrounding rock reduces obviously,and the break angle increases gradually.When the dilation angle is equal to the internal friction angle,the materials follow associated flow rule,and the numerical solution of the break angle is larger than the analytical solution,with the maximum relative difference being greater than 16.7% in road tunnels.Therefore,associated flow rule leads to overestimating break angle,and the dilation angle has an important influence on the failure surface shape for shallow tunnels in the loose surrounding rocks.
文摘The author has observed the epithelium and basement membrane of uterus, oviduct and fimbriae in mice under the TEM by oral administration of AgNo<sub>3</sub> tracer. The results showed that there was obvious deposit of argentum granules outside the basement membrane of mucosal epithelium of the uterus, oviduct and fimbriae as well as outside the basement membrane of uterine glands. And there was dilatation fully filled with high electron-dense argentum granules at the intercellular space just beneath the tight junction between the mucosal epithelial cells of uterus, oviduet, fimbriae. All these finding suggest that the uterus, oviduct and fimbriae serve as barriers to the heavy metal argentum ions.
基金Projects(51304125,51379114)supported by the National Natural Science Foundation of ChinaProject(BS2013NJ004)supported by Award Fund for Outstanding Young and Middle-Aged Scientist of Shangdong Province,ChinaProject(201301004)supported by the Innovation Fund for Postdoctor of Shandong Province,China
文摘In deep underground mining, the surrounding rocks are very soft with high stress. Their deformation and destruction are serious, and frequent failures occur on the bolt support. The failure mechanism of bolt support is proposed to solve these problems. A calculation theory is established on the bond strength of the interface between the anchoring agent and surrounding rocks. An analysis is made on the influence law of different mechanical parameters of surrounding rocks on the interfacial bond strength. Based on the research, a new high-strength bolt-grouting technology is developed and applied on site. Besides, some helpful engineering suggestions and measures are proposed. The research shows that the serious deformation and failure, and the lower bond strength are the major factors causing frequent failures of bolt support. So, the bolt could not give full play to its supporting potential. It is also shown that as the integrity, strength, interface dilatancy and stress of surrounding rocks are improved, the bond strength will increase. So, the anchoring force on surrounding rocks can be effectively improved by employing an anchoring agent with high sand content, mechanical anchoring means, or grouting reinforcement. The new technology has advantages in a high strength, imposing pre-tightening force, and giving full play to the bolt supporting potential. Hence, it can improve the control effect on surrounding rocks. All these could be helpful references for the design of bolt support in deep underground mines.
基金Project(11102219) supported by the National Natural Science Foundation of ChinaProject(2013CB036405) supported by the National Basic Research Program of China
文摘The closed form solutions of the stress and displacement in strain softening rock mass around a newly formed cavity are derived with a three step-wise elasto-plastic model. Hoek-Brown criterion is adopted as the yielding criterion of rock mass. Damage factors are proposed to account for degradation of the material parameters to reflect the degree of strain softening. The surrounding rock mass around the cavity is divided into three regions: elastic region, strain softening region and residual state region. The analytical solutions of stress, strain, displacement and radius of each region are obtained. The effects of the strain softening and shear dilatancy behavior on the results are investigated with parametric studies. The results show that the radii of the residual state region and strain softening region in the surrounding rock mass with higher damage degree are larger. The radii of the residual state region and strain softening region are 1-2 times and 1.5-3 times of the cavity radius, respectively. The radial and tangential stresses decrease with the increase of the damage factor. The displacement of the cavity wall for the case with maximum plastic bulk strain is nearly twice than that with no dilation. Rock mass moves more toward the center for the case with larger damage factor and shear dilation. The area of the plastic region is larger when the damage factors are considered. The displacements in the surrounding rock mass increase with the increase of the damage factors and shear dilation factors. The solutions can be applied to the stability analysis and support design of the underground excavation.
文摘The predictive capacity of numerical analyses in geotechnical engineering depends strongly on the efficiency of constitutive models used for modeling of interfaces behavior.Interfaces are considered as thin layers of the soil adjacent to structures boundary whose major role is transferring loads from structures to soil masses.An interface model within the bounding surface plasticity framework and the critical state soil mechanics is presented.To this aim,general formulation of the interface model according to the bounding surface plasticity theory is described first.Similar to granular soils,it has been shown that the mechanical behavior of sand-structure interfaces is highly affected by the interface state that is the combined influences of density and applied normal stress.Therefore,several ingredients of the model are directly related to the interface state.As a result of this feature,the model is enabled to distinguish interfaces in dense state from those in loose state and to provide realistic predictions over wide ranges of density and normal stress values.In evaluation of the model,a reasonable correspondence between the model predictions and the experimental data of various research teams is found.
基金Project(51174128)supported by the National Natural Science Foundation of ChinaProject(20123718110007)supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘Surrounding rocks of weakly consolidated soft rock roadway show obvious strain softening and dilatancy effects after excavation. A damage coefficient concerning modulus attenuation was defined. Response models of stress and displacement of surrounding rock of soft rock roadway and analytical expressions to calculate plastic zones under different interior pressures and non-uniform original rock stresses were derived based on damage theories and a triple linear elastic-plastic strain softening model. Influence laws of dilatancy gradient on damage development, distributions of stresses and displacement in plastic region were analyzed. Interior pressure conditions to develop plastic region under different origin rock stresses were established and their influences on plastic region distribution were also discussed. The results show that the order of maximum principle stress is exchanged between ~0 and trr with the increase of interior pressure P0, which causes distributions of plastic zone and stress shift. Dilatancy effect which has great influences on the damage propagation and displacements in plastic region has little effect on the size of plastic region and stress responses. The conclusions provide a theoretical basis for a reasonable evaluation of stability and effective supporting of weakly consolidated soft rock roadway.
基金Project(07JCZDJC09800) supported by Tianjin Natural Science FoundationProject(07FDZDSF01200) supported by Tianjin Science and Technology Innovation Special Funds
文摘Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sand under monotonic loading when the similarity-ratio equals to unity. The characteristics of the model are as follows: 1) A reverse bullet-shaped yield surface is adopted to ensure accurate prediction of the behavior of sand, instead of bullet-shaped or elliptical yield surface in Cam-Clay model. 2) No unique relationship between void ratio and the mean normal stress for sand prevents the direct coupling of yield surface size to void ratio, so incremental deviatoric strain hardening rule is used. 3) The model combines the concept of state-dependent dilatancy by incorporating state parameter in Rowe's stress dilatancy equation, which accounts for the dependence of dilatancy on the stress state and the material internal state. A single set of model constants, which is calibrated, can simulate stress-strain response under different initial void ratios and different confine pressures. The model is validated true by comparing predicted results with experimental results under monotonic and cyclic loading conditions.
文摘Dilation angle is a significant parameter needed for numerical simulation of tunnels.Even though dilation parameter is physically variable and dependent on confinement and experienced shear plastic strain based on the existing dilation models,numerical simulations of tunnels and underground openings with constant dilation parameter usually lead to satisfactory results in practical use.This study aims to find out why constant dilation angle is enough under practical conditions to simulate numerically tunnels and underground excavations in spite of the fact that dilation angle is variable in laboratory and experimental scale.With this aim,this work studies how mobilized dilation angle varies in a plastic zone surrounding a tunnel.For the circular tunnel under uniform in situ stress field,the stepwise finite difference approximation analytical solution considering strain softening rock mass behavior with mobilized dilation angle was used to study how mobilized dilation angle varies in plastic zone around tunnel under very different conditions.In practical conditions determined in this study,dilative behavior of all over the plastic zone around the tunnel can be approximated to constant dilation angle in the middle region of the plastic zone.Moreover,the plastic zone displacements for mobilized and constant dilation angle models are compared with each other.Further investigation under more general non-uniform in situ stress conditions and non-circular tunnels is performed by using the commercial finite difference software to numerically simulate the Mine-by experimental tunnel of AECL(Atomic Energy of Canada Limited)and the arched tunnel.Although the Mine-by and arched tunnels were numerically simulated based on the mobilized dilation angle model,the variability associated with dilation angle around the simulated Mine-by and arched tunnels is insignificant,and dilation angle is approximately constant in the plastic zone.
基金Project(2009318000046) supported by the Western Transport Technical Program of the Ministry of Transport,China
文摘A revised displacement discontinuity method(DDM) program is developed for the simulation of rock joint propagation and dilatancy analysis. The non-linear joint model used in the program adopts Barton-Bandis normal deformation model, Kulhaway shear deformation model and Mohr-Coulomb criterion. The joint propagation criterion is based on the equivalent stress intensity factor which can be obtained by regression analysis. The simulated rock joint propagation accords well with the existing knowledge. The closure and opening of joint is investigated by DDM, and it is shown that if the opening volume of propagated joint is larger than closure volume of the old joint, the joint dilatancy occurs. The dilatancy condition is mainly controlled by the normal stiffness of the rock joint. When the normal stiffness is larger than the critical value, joint dilatancy occurs. The critical normal stiffness of rock joint changes with the joint-load angle, and joint dilatancy is most possible to occur at 30°.
基金Project(2015M570678)supported by China Postdoctoral Science Foundation funded project
文摘The understanding of the rock deformation and failure process and the development of appropriate constitutive models are the basis for solving problems in rock engineering. In order to investigate progressive failure behavior in brittle rocks, a modified constitutive model was developed which follows the principles of the continuum damage mechanics method. It incorporates non-linear Hoek-Brown failure criterion, confining pressure-dependent strength degradation and volume dilation laws, and is able to represent the nonlinear degradation and dilation behaviors of brittle rocks in the post-failure region. A series of triaxial compression tests were carried out on Eibenstock(Germany) granite samples. Based on a lab data fitting procedure, a consistent parameter set for the modified constitutive model was deduced and implemented into the numerical code FLAC3 D. The good agreement between numerical and laboratory results indicates that the modified constitutive law is well suited to represent the nonlinear mechanical behavior of brittle rock especially in the post-failure region.
基金Project(50825901)supported by the National Natural Science Foundation for Distinguished Young Scholar of ChinaProject(2009492011)supported by State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering,Nanjing Hydraulic Research Institute,China+1 种基金Project(GH200903)supported by Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering(Hohai University),ChinaProject(Y1090151)supported by Natural Science Foundation of Zhejiang Province,China
文摘A new double-yield-sarface （DYS） model was developed to characterize the strength and deformation behaviors of coarse granular materials （CGMs）. Two kinds of deformation mechanisms, including the shear and compressive plastic deformation, were taken into account in this model, These two deformation mechanisms were described by the shear and compressive yield functions, respectively. The Lode angle dependent formulations of proposed model were deduced by incorporating a 3D nonlinear unified failure criterion. Some comparisons were presented between the numerical predictions of proposed model and test data of true triaxial tests on the modeled rockfills. The model predictions are in good agreement with the test data and capture the strain hardening and plastic volumetric dilation of CGMs. These findings verify the reasonability of current DYS model, and indicate that this model is well suited to reproduce the stress-strain-volume change behavior of CGMs in general.
基金Project(50908233)supported by the National Natural Science Foundation of ChinaProject(2008G031-Q)supported by National Engineering Laboratory for High Speed Railway Construction,China
文摘By using large scale triaxial shearing apparatus,consolidated-drained shear tests were conducted on coarse-grained soil with different gradations.In order to describe their deformation rules,three main characteristics of tangent Poisson ratio curves were summarized and the reason was revealed by dividing the movement of soil particles into two kinds: the movement of fine particles and the movement of coarse particles.Then,a volumetric strain expression and a tangent Poisson ratio expression were put forward,and two defects of widely used Duncan-Chang model were fixed.Results calculated from them agree well with test results.There are three parameters,namely L,G and F,in this new model.Parameter L reflects the dilatancy of a specimen and L=4 can be used as a criterion to estimate whether a certain kind of soil has dilatancy quality or not.Parameters G and F relate to the initial slope of tangent Poisson ratio curves,and G=F=0 indicates a special situation which happens in dense granular material of the same diameter.Influences of various gradations on volume deformation are mainly reflected in parameter L which is smaller when there are more gravels in specimens.
基金Project(51874202) supported by the National Natural Science Foundation of ChinaProject(2017JQ0003) supported by the Sichuan Youth Fund,China。
文摘Considering the fact that in some complex cases,plate anchors are buried in multi-layered geotechnical materials,the ultimate dynamic analysis was performed to investigate the uplift capacity and failure mechanism of shallow strips and circular plate anchors in multi-layered soils.The nonlinear strength criterion and non-associated flow rule of geotechnical materials were introduced to investigate the influence of nonuniformity on the pullout performance and failure mechanism of shallow plate anchors.The expressions of the detaching curves or surfaces were obtained to reflect the failure mechanism,which can be used to figure out the ultimate uplift capacity and failure range.The results are generally in agreement with the numerical simulations and previous research.The effects of various parameters on the ultimate uplift capacity and failure mechanism of plate anchors in multi-layered soils were investigated,and it is found that the ultimate uplift capacity and failure range of shallow anchors increase with the increase of initial cohesion and dilatancy coefficient,but decrease with the unit weight,axial tensile stress and nonlinear coefficient.
基金Project(2010B14814) supported by the Fundamental Research Funds for the Central Universities of ChinaProject(200801133) supported by the Ministry of Water Resources of China for Public Welfare ProfessionProject(50809023) supported by the National Natural Science Foundation of China
文摘Based on Mohr-Coulomb （M-C） criterion, the parameters of Druker-Prager （D-P） criterion for geomaterial were determined under non-associated flow rule, and thus a new D-P type criterion was presented. Two assumptions were employed during the derivation： 1） principal strains by M-C model and D-P model are equal, and 2） the material is under plane strain condition. Based on the analysis of the surface on rt plane, it is found that the proposed D-P type criterion is better than the D-P criterion with M-C circumscribed circle or M-C inscribed circle, and is applicable for stress Lode angle less than zero. By comparing the predicted results with the test data of sand under plane strain condition and other D-P criteria, the proposed criterion is verified and agrees well with the test data, which is further proved to be better than other D--P type criteria in certain range of Lode angle. The criterion was compiled into a finite difference package FLAC3D by user-subroutine, and was used to analyze the stability of a slope by strength reduction method. The predicted slope safety factor from the proposed criterion agrees well with that by Spencer method, and it is more accurate than that from classic D-P criteria.
基金Project(20110094110002) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of ChinaProject(200801014) supported by the Ministry of Water Resources of ChinaProject(50825901) supported by the National Natural Science Foundation of China
文摘The mechanical behaviors of the interface between coarse-grained soil and concrete were investigated by simple shear tests under condition of mixed soil slurry (bentonite mixed with cement grout).For comparison,the interfaces both without slurry and with bentonite slurry were analyzed.The experimental results show that different slurries exert much influence on the strength and deformation of soil/structure interface.Under mixed soil slurry,strain softening and shear dilatation are observed,while shear dilatation appears under the small normal stress of the interface without slurry,and shear contraction is significant under the condition of the bentonite slurry.The thickness of the interface was determined by analyzing the disturbed height of the sample with both simple shear test and particle flow code (PFC).An elasto-plastic constitutive model incorporating strain softening and dilatancy for thin layer element of interface was formulated in the framework of generalized potential theory.The relation curves of shear stress and shear strain,as well as the relation curves of normal strain and shear strain,were fitted by a piecewise function composed by hyperbolic functions and resembling normal functions.The entire model parameters can be identified by tests.The new model is verified by comparing the measured data of indoor cut-off wall model tests with the predictions from finite element method (FEM).The FEM results indicate that the stress of wall calculated by using Goodman element is too large,and the maximum deviation between the test data and prediction is about 45%.While the prediction from the proposed model is close to the measured data,and the error is generally less than 10%.
