Using fixed-bed reaction method and changing the gas composition and dust content,the influence of blast furnace top gas composition and dust on HCl removal with low temperature Ca-based antichlor was studied.It was f...Using fixed-bed reaction method and changing the gas composition and dust content,the influence of blast furnace top gas composition and dust on HCl removal with low temperature Ca-based antichlor was studied.It was found that,when the content of CO2 in blast furnace top gas increased,the dechlorination efficiency was getting worse obviously;when the contents of CO and N2 increased,the dechlorination efficiency was getting better to a certain extent;when the content of H2 changed,the dechlorination efficiency got no significant change;as the content of dust increased,the dechlorination efficiency got better obviously when the content was less than 15 g/m3,but it would be got worse quickly when the content was more than 20 g/m3,and the best content was 15–20 g/m3;the suitable site of the process of dechlorination was after gravity dust collector and before bag dust collector.展开更多
Traditional treatments of zinc dross have many disadvantages,such as complicated recovering process and serious environmental pollution.In this work,a new process of chlorine removal from zinc dross by microwave was p...Traditional treatments of zinc dross have many disadvantages,such as complicated recovering process and serious environmental pollution.In this work,a new process of chlorine removal from zinc dross by microwave was proposed for solving problem of recycling the zinc dross.With better ability of absorbing the microwave than zinc oxide,the main material in zinc dross,chlorides,can be heated and evaporated rapidly during microwave roasting.Various parameters including roasting temperature,duration time and stirring speed were optimized.The microstructure of roasted materials was characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM).The content of the chloride was analyzed by the method of chlorine ion selective electrode.The experiments indicate that the best duration time is 60 min with a stirring speed of 15 r/min during the microwave roasting process.The dechlorination rate reaches peak value of 88% at 700 ℃.The chlorine is removed as HCl gas when water vapor is used as activating agent,which means that it can be recovered into hydrochloride acid.展开更多
Fenton oxidation was used as the pretreatment of 2-chlorophenol wastewater with the objective of dechlorination, as it was considered that after breakage of aryl—Cl bond, the generated intermediates may be easily bio...Fenton oxidation was used as the pretreatment of 2-chlorophenol wastewater with the objective of dechlorination, as it was considered that after breakage of aryl—Cl bond, the generated intermediates may be easily biodegraded. Hence, the optimization of pH and the low Fenton reagent doses for dechlorination was investigated. More than 99% dechlorination is obtained at the optimal pH 4 and the Fenton reagent doses of 86 mmol/L H2 O2 and 2.87 mmol/L Fe2+. The corresponding 2-chlorophenol is degraded completely, 80.02% COD is also removed, and the biodegradability, evaluated in terms of the BOD5 /COD ratio, is increased up to 0.41. To test the effect of this pretreatment, the pretreated 2-chlorophenol wastewater was fed to a sequencing batch reactor(SBR). The results show that complete mineralization is achieved. It is demonstrated that, for the treatment of recalcitrant compounds like 2-chlorophenol, the Fenton pretreatment could be quite effective and economical for enhancing the biodegradability in a Fenton-biological coupled system.展开更多
The pyrolysis dechlorination of PVC (polyvinyl chloride) has been carried out by batch operation under atmospheric pressure. The kinetics involved in the PVC thermal decomposition was studied by using thermogravimetri...The pyrolysis dechlorination of PVC (polyvinyl chloride) has been carried out by batch operation under atmospheric pressure. The kinetics involved in the PVC thermal decomposition was studied by using thermogravimetric technique. Several tests were carried out at the heating rate of 5-10℃/min, the yields of products and the distribution of chlorine were also studied. The kinetic parameters such as activation energies, reaction orders and preexponential factors under nitrogen atmosphere were calculated by applying Friedman’s method. The results showed that the PVC thermal degradation is substantially a two-step process. The first step mainly involves dechlorination of the polymers. HCI is the main volatile product and this reaction can be seen as a first-order reaction. A kinetic model for the thermal dechlorination of PVC has been developed.展开更多
Most Zn hydrometallurgy factories adopt Cu2SO4 as a dechlorination reagent from zinc solution nowadays, thus much CuCl residue is produced. The existing process of treating this residue is washing with water or sodium...Most Zn hydrometallurgy factories adopt Cu2SO4 as a dechlorination reagent from zinc solution nowadays, thus much CuCl residue is produced. The existing process of treating this residue is washing with water or sodium carbonate solution, which would cause a lot of troubles to water treatment and waste discharge. A method of microwave roasting was adopted for dechlorination of CuCl residue. A 1.5 kW microwave roasting equipment with dust collection and tail gas adsorption systems was set up and applied during the experiment. By investigating the effect of temperature, heat preservation time, moisture content of raw material and grain size of samples on the dechlorination, the optimal experimental condition is obtained. When the samples with 2% moisture and <150 μm grain size are microwave roasted at 400 °C for 2 h, the Cl content turns from 14.27% to 1.35% and the dechlorination rate is as high as 90%, while that with conventional heating is only 60%-80%. The phase change of the roasting process investigated with X-ray diffraction verifies that CuCl in CuCl residue is removed by being transformed into CuO.展开更多
基金Project(51274080)supported by the National Natural Science Foundation of ChinaProject(E2013209051)supported by the Hebei Science Foundation and the Steel and Iron Joint Research Foundation Project,China+1 种基金Project(U1502273)supported by the Joint Funds of the Natural Science Foundation of China and Yunnan Provincial GovernmentProjects(N150202001,N150203003)supported by the Fundamental Research Funds for the Central Universities,China
文摘Using fixed-bed reaction method and changing the gas composition and dust content,the influence of blast furnace top gas composition and dust on HCl removal with low temperature Ca-based antichlor was studied.It was found that,when the content of CO2 in blast furnace top gas increased,the dechlorination efficiency was getting worse obviously;when the contents of CO and N2 increased,the dechlorination efficiency was getting better to a certain extent;when the content of H2 changed,the dechlorination efficiency got no significant change;as the content of dust increased,the dechlorination efficiency got better obviously when the content was less than 15 g/m3,but it would be got worse quickly when the content was more than 20 g/m3,and the best content was 15–20 g/m3;the suitable site of the process of dechlorination was after gravity dust collector and before bag dust collector.
基金Project(51104073) supported by the National Natural Science Foundation of China
文摘Traditional treatments of zinc dross have many disadvantages,such as complicated recovering process and serious environmental pollution.In this work,a new process of chlorine removal from zinc dross by microwave was proposed for solving problem of recycling the zinc dross.With better ability of absorbing the microwave than zinc oxide,the main material in zinc dross,chlorides,can be heated and evaporated rapidly during microwave roasting.Various parameters including roasting temperature,duration time and stirring speed were optimized.The microstructure of roasted materials was characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM).The content of the chloride was analyzed by the method of chlorine ion selective electrode.The experiments indicate that the best duration time is 60 min with a stirring speed of 15 r/min during the microwave roasting process.The dechlorination rate reaches peak value of 88% at 700 ℃.The chlorine is removed as HCl gas when water vapor is used as activating agent,which means that it can be recovered into hydrochloride acid.
基金Project(11JJ2031) supported by the Natural Science Fund of Hunan Province,China
文摘Fenton oxidation was used as the pretreatment of 2-chlorophenol wastewater with the objective of dechlorination, as it was considered that after breakage of aryl—Cl bond, the generated intermediates may be easily biodegraded. Hence, the optimization of pH and the low Fenton reagent doses for dechlorination was investigated. More than 99% dechlorination is obtained at the optimal pH 4 and the Fenton reagent doses of 86 mmol/L H2 O2 and 2.87 mmol/L Fe2+. The corresponding 2-chlorophenol is degraded completely, 80.02% COD is also removed, and the biodegradability, evaluated in terms of the BOD5 /COD ratio, is increased up to 0.41. To test the effect of this pretreatment, the pretreated 2-chlorophenol wastewater was fed to a sequencing batch reactor(SBR). The results show that complete mineralization is achieved. It is demonstrated that, for the treatment of recalcitrant compounds like 2-chlorophenol, the Fenton pretreatment could be quite effective and economical for enhancing the biodegradability in a Fenton-biological coupled system.
文摘The pyrolysis dechlorination of PVC (polyvinyl chloride) has been carried out by batch operation under atmospheric pressure. The kinetics involved in the PVC thermal decomposition was studied by using thermogravimetric technique. Several tests were carried out at the heating rate of 5-10℃/min, the yields of products and the distribution of chlorine were also studied. The kinetic parameters such as activation energies, reaction orders and preexponential factors under nitrogen atmosphere were calculated by applying Friedman’s method. The results showed that the PVC thermal degradation is substantially a two-step process. The first step mainly involves dechlorination of the polymers. HCI is the main volatile product and this reaction can be seen as a first-order reaction. A kinetic model for the thermal dechlorination of PVC has been developed.
基金Project(51104073)supported by the National Natural Science Foundation of China
文摘Most Zn hydrometallurgy factories adopt Cu2SO4 as a dechlorination reagent from zinc solution nowadays, thus much CuCl residue is produced. The existing process of treating this residue is washing with water or sodium carbonate solution, which would cause a lot of troubles to water treatment and waste discharge. A method of microwave roasting was adopted for dechlorination of CuCl residue. A 1.5 kW microwave roasting equipment with dust collection and tail gas adsorption systems was set up and applied during the experiment. By investigating the effect of temperature, heat preservation time, moisture content of raw material and grain size of samples on the dechlorination, the optimal experimental condition is obtained. When the samples with 2% moisture and <150 μm grain size are microwave roasted at 400 °C for 2 h, the Cl content turns from 14.27% to 1.35% and the dechlorination rate is as high as 90%, while that with conventional heating is only 60%-80%. The phase change of the roasting process investigated with X-ray diffraction verifies that CuCl in CuCl residue is removed by being transformed into CuO.
