A high saturation magnetic flux density(Bs)is essential for the development of Fe-based amorphous alloys for electromagnetic devices and motors.However,achieving a high Bs often compromises the glass-forming ability(G...A high saturation magnetic flux density(Bs)is essential for the development of Fe-based amorphous alloys for electromagnetic devices and motors.However,achieving a high Bs often compromises the glass-forming ability(GFA)of Fe-based amorphous alloys.This study investigates the effects of ferromagnetic elements(Fe,Co,and Ni)on the microstructure and magnetic properties of Fe86B7C7 amorphous alloys through experiments and ab initio molecular dynamics simulations.By analyzing both the experimental and simulation results,the relationship between the atomic structures,GFA,and magnetic properties of these amorphous alloys was determined.The results indicate that the GFA of the alloys is correlated with the proportion of icosahedral and body-centered cubic clusters.The addition of Co and Ni not only improved the GFA of the alloys but also effectively increased the overall magnetic moment with an appropriate amount of Co and a small amount of Ni.This increase in the magnetic moment primarily arises from the enhancement of the magnetic moment of Fe atoms,resulting from the redistribution between the spin-up and spin-down electrons of Fe-3d orbits,as well as the strong exchange interactions between Fe and Co and Fe–Ni pairs.The results obtained offer valuable insights into the correlation between the atomic structure and magnetic properties of these amorphous alloys and suggest potential directions for the optimization of Fe-based amorphous alloys.展开更多
The unique long-range disordered atomic arrangement inherent in amorphous materials endows them with a range of superior properties,rendering them highly promising for applications in catalysis,medicine,and battery te...The unique long-range disordered atomic arrangement inherent in amorphous materials endows them with a range of superior properties,rendering them highly promising for applications in catalysis,medicine,and battery technology,among other fields.Since not all materials can be synthesized into an amorphous structure,the composition design of amorphous materials holds significant importance.Machine learning offers a valuable alternative to traditional“trial-anderror”methods by predicting properties through experimental data,thus providing efficient guidance in material design.In this study,we develop a machine learning workflow to predict the critical casting diameter,glass transition temperature,and Young's modulus for 45 ternary reported amorphous alloy systems.The predicted results have been organized into a database,enabling direct retrieval of predicted values based on compositional information.Furthermore,the applications of high glass forming ability region screening for specified system,multi-property target system screening and high glass forming ability region search through iteration are also demonstrated.By utilizing machine learning predictions,researchers can effectively narrow the experimental scope and expedite the exploration of compositions.展开更多
7075 aluminum alloy is often used as an important load-bearing structure in aircraft industry due to its superior mechanical properties.During the process of deep hole boring,the boring bar is prone to vibrate because...7075 aluminum alloy is often used as an important load-bearing structure in aircraft industry due to its superior mechanical properties.During the process of deep hole boring,the boring bar is prone to vibrate because of its limited machining space,bad environment and large elongation induced low stiffness.To reduce vibration and improve machined surface quality,a particle damping boring bar,filled with particles in its inside damping block,is designed based on the theory of vibration control.The theoretical damping coefficient is determined,then the boring bar structure is designed and trial-manufactured.Experimental studies through impact testing show that cemented carbide particles with a diameter of 5 mm and a filling rate of 70% achieve a damping ratio of 19.386%,providing excellent vibration reduction capabilities,which may reduce the possibility of boring vibration.Then,experiments are setup to investigate its vibration reduction performance during deep hole boring of 7075 aluminum alloy.To observe more obviously,severe working conditions are adopted and carried out to acquire the time domain vibration signal of the head of the boring bar and the surface morphologies and roughness values of the workpieces.By comparing different experimental results,it is found that the designed boring bar could reduce the maximum vibration amplitude by up to 81.01% and the surface roughness value by up to 47.09% compared with the ordinary boring bar in two sets of experiments,proving that the designed boring bar can effectively reduce vibration.This study can offer certain valuable insights for the machining of this material.展开更多
Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we...Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we perform systematic studies on the elastic properties of the Cu–6wt% Ag alloy wire, which is a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques, i.e., resonant ultrasound spectroscopy(RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu–6wt% Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this opportunity to test the availability of our newly-built ultrasound pulse-echo facility at the Wuhan National High Magnetic Field Center(WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu–6wt% Ag alloy wire remains excellent without anomalous softening under extreme conditions,e.g., in ultra-high magnetic field up to 50 T and nitrogen or helium cryogenic liquids.展开更多
Aqueous zinc-ion batteries(AZIBs)present a promising option for next-generation batteries given their high safety,eco-friendliness,and resource sustainability.Nonetheless,the practical application of zinc anodes is hi...Aqueous zinc-ion batteries(AZIBs)present a promising option for next-generation batteries given their high safety,eco-friendliness,and resource sustainability.Nonetheless,the practical application of zinc anodes is hindered by inevitable parasitic reactions and dendrite growth.Here,zinc alloy layers(i.e.,ZnCo and ZnFe alloys)were rationally constructed on the zinc surface by chemical displacement reactions.The alloying process exposes more(002)planes of the ZnCo anode to guide the preferential and dendrite-free zinc deposition.Furthermore,the ZnCo alloy layer not only effectively inhibits water-induced side reactions but also accelerates electrode kinetics,enabling highly reversible zinc plating/stripping.As a result,the ZnCo anode achieves a Coulombic efficiency of 99.2%over 1300 cycles,and the ZnCo symmetric cell exhibits a long cycle life of over 2000 h at 4.4 mA cm^(-2).Importantly,the ZnCo//NH_(4)V_(4)O_(10)full cell retains a high discharge capacity of 218.4 mAh g^(-1)after 800 cycles.Meanwhile,the ZnFe-based symmetric cell also displays excellent cycling stability over 2500 h at 1.77 mA cm^(-2).This strategy provides a facile anode modification approach toward high-performance AZIBs.展开更多
This work aimed to(i)understand conventional and pulse gas tungsten arc welding(GTAW)of AZ31B,and(ii)explore high frequency welding(100 Hz-1500 Hz).GTA welding with alternating current(AC)and direct current electrode ...This work aimed to(i)understand conventional and pulse gas tungsten arc welding(GTAW)of AZ31B,and(ii)explore high frequency welding(100 Hz-1500 Hz).GTA welding with alternating current(AC)and direct current electrode positive(DCEP)polarities yielded crack-free partial penetration welds for6 mm thick AZ31B alloy sheet.Welding under direct current electrode negative(DCEN)polarity with identical parameters as that for AC and DCEP resulted in full penetration welds that had microcracks.Defect-free full-penetration welds could be accomplished with pulse GTA welding using DCEN polarity at a pulse frequency of 1 Hz with a pulse duration ratio of 1:1.The resultant DCEN P 1:1 weld metal had a microstructure finer than the conventional DCEN weld.Welds produced with pulse duration ratios of 1:2and 1:4 lacked penetration but had a much finer microstructures because of the lower heat input.The arc constriction by the high frequency pulsing in the Activ Arc■-High frequency(AA-HF)mode welding was responsible for deeper penetration.Welds produced under DCEN pulsing and AA-HF conditions had hardness higher than conventional DCEN,DCEP and AC GTA welds,attributed to the finer microstructure.AA-HF GTA welding produced defect free deeper penetration welds with good microstructural features/mechanical properties and also gave an advantage of 50%enhanced productivity when welded at1500 Hz.展开更多
Uranium–molybdenum(U–Mo) alloys are critical for nuclear power generation and propulsion because of their superior thermal conductivity, irradiation stability, and anti-swelling properties. This study explores the p...Uranium–molybdenum(U–Mo) alloys are critical for nuclear power generation and propulsion because of their superior thermal conductivity, irradiation stability, and anti-swelling properties. This study explores the plastic deformation mechanisms of γ-phase U–Mo alloys using molecular dynamics(MD) simulations. In the slip model, the generalized stacking fault energy(GSFE) and the modified Peierls–Nabarro(P–N) model are used to determine the competitive relationships among different slip systems. In the twinning model, the generalized plane fault energy(GPFE) is assessed to evaluate the competition between slip and twinning. The findings reveal that among the three slip systems, the {110}<111>slip system is preferentially activated, while in the {112}<111> system, twinning is favored over slip, as confirmed by MD tensile simulations conducted in various directions. Additionally, the impact of Mo content on deformation behavior is emphasized. Insights are provided for optimizing process conditions to avoid γ → α′′ transitions, thereby maintaining a higher proportion of γ-phase U–Mo alloys for practical applications.展开更多
This work investigated the microstructure,magnetic properties,and crystallization kinetics of the as-spun and annealed alloy ribbons of(Fe_(40-x)Co_xNi_(40)Si_(6.33)B_(12.66)Cu_1)_(0.97)Nb_(0.03),where x=0,6,7,8,9,pre...This work investigated the microstructure,magnetic properties,and crystallization kinetics of the as-spun and annealed alloy ribbons of(Fe_(40-x)Co_xNi_(40)Si_(6.33)B_(12.66)Cu_1)_(0.97)Nb_(0.03),where x=0,6,7,8,9,prepared using the meltspinning method.The results show that adding a moderate amount of Co can improve the glass forming ability(GFA),the first peak crystallization temperature,and thermal stability of the as-spun alloy ribbons.With x=7,the two-stage crystallization temperature interval△Tx=90 exhibits optimal thermal stability,and the alloy annealed at 673 K for 10 minutes shows the favorable combined magnetic properties,with H_(c)=0.12 A/m,M_(s)=88.7 A·m^(2)/kg,andμ_(e)=13800.The magnetic domain results show that annealing removes numerous pinning points in the magnetic domains of the alloy ribbons,making the domain walls smoother and effectively reducing the pinning effect.展开更多
Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other...Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other fields.In recent years,with the continuous increase in demand for medium-thick plate titanium alloys,corresponding welding technologies have also continued to develop.Therefore,this article reviews the research progress of deep penetration welding technology for medium-thick plate titanium alloys,mainly covering traditional arc welding,high-energy beam welding,and other welding technologies.Among many methods,narrow gap welding,hybrid welding,and external energy field assistance welding all contribute to improving the welding efficiency and quality of medium-thick plate titanium alloys.Finally,the development trend of deep penetration welding technology for mediumthick plate titanium alloys is prospected.展开更多
Constructing electrocatalytic overall reaction technology to couple the electrosynthesis of adipic acid with energy-saving hydrogen production is of significant for sustainable energy systems.However,the development o...Constructing electrocatalytic overall reaction technology to couple the electrosynthesis of adipic acid with energy-saving hydrogen production is of significant for sustainable energy systems.However,the development of highly-active bifunctional electrocatalysts remains a challenge.Herein,3D hierarchical nickel-copper alloying arrays with dendritic morphology are manufactured by a simple electrodeposition process,standing for the excellent bifunctional electrocatalyst towards the co-production of adipic acid and H_(2)from cyclohexanone and water.The membrane-free flow electrolyzer of Cu_(0.81)Ni_(0.19)/NF shows the superior electrooxidation performance of ketone-alcohol(KA)oil with high faradaic efficiencies of over 90%for adipic acid and H_(2),robust stability over 200 h as well as a high yield of 0.6 mmol h^(-1) for adipic acid at 100 mA cm^(-2).In-situ spectroscopy indicates the Cu_(0.81)Ni_(0.19)alloy contributes to forming more active NiOOH species to involve in the conversion of cyclohexanone to adipic acid,while the proposed reaction pathway undergoes the 2-hydroxycyclohexanone and 2,7-oxepanedione intermediates.Moreover,the theoretical calculations confirm that the optimal electronic interaction,boosted reaction kinetics as well as improved adsorption free energy of reaction intermediates,synergistically endows Cu_(0.81)Ni_(0.19)alloy with superior bifunctional performance.展开更多
Electrochemical reduction of NO_(2)-to NH_(3)(NO_(2)-RR) is recognized as an appealing approach for achieving renewable NH_(3)synthesis and waste NO_(2)-removal.Herein,we report isolated Bi alloyed Ru (Bi1Ru) as an ef...Electrochemical reduction of NO_(2)-to NH_(3)(NO_(2)-RR) is recognized as an appealing approach for achieving renewable NH_(3)synthesis and waste NO_(2)-removal.Herein,we report isolated Bi alloyed Ru (Bi1Ru) as an efficient NO_(2)-RR catalyst.Theoretical calculations and in situ electrochemical measurements reveal the creation of Bi1-Ru dual sites which can remarkably promote NO_(2)-activation and suppress proton adsorption,while accelerating the NO_(2)-RR protonation energetics to render a high NO_(2)--to-NH_(3)conversion efficiency.Remarkably,Bi1Ru assembled in a flow cell delivers an NH_(3)yield rate of 1901.4μmol h^(-1)cm^(-2)and an NH_(3)-Faradaic efficiency of 94.3%at an industrial-level current density of 324.3 mA cm^(-2).This study offers new perspectives for designing and constructing p-block single-atom alloys as robust and high-current-density NO_(2)-RR catalysts toward the ammonia electrosynthesis.展开更多
The synergistic damage effect of irradiation and corrosion of reactor structural materials has been a prominent research focus.This paper provides a comprehensive review of the synergistic effects on the third-and fou...The synergistic damage effect of irradiation and corrosion of reactor structural materials has been a prominent research focus.This paper provides a comprehensive review of the synergistic effects on the third-and fourth-generation fission nuclear energy structural materials used in pressurized water reactors and molten salt reactors.The competitive mechanisms of multiple influencing factors,such as the irradiation dose,corrosion type,and environmental temperature,are summarized in this paper.Conceptual approaches are proposed to alleviate the synergistic damage caused by irradiation and corrosion,thereby promoting in-depth research in the future and solving this key challenge for the structural materials used in reactors.展开更多
The interface mechanism between catalyst and carbon substrate has been the focus of research.In this paper,the FeCo alloy embedded N,S co-doped carbon substrate bifunctional catalyst(FeCo/S-NC)is obtained by a simple ...The interface mechanism between catalyst and carbon substrate has been the focus of research.In this paper,the FeCo alloy embedded N,S co-doped carbon substrate bifunctional catalyst(FeCo/S-NC)is obtained by a simple one-step pyrolysis strategy.The experimental results and density functional theory(DFT)calculation show that the formation of FeCo alloy is conducive to promoting electron transfer,and the introduction of S atom can enhance the interaction between FeCo alloy and carbon substrate,thus inhibiting the migration and agglomeration of particles on the surface of carbon material.The FeCo/SNC catalysts show outstanding performance for oxygen reduction reaction(ORR)and oxygen evolution reaction(OER).FeCo/S-NC shows a high half-wave potential(E_(1/2)=0.8823 V)for ORR and a low overpotential at 10 mA cm^(-2)(E_(j=10)=299 mV)for OER.In addition,compared with Pt/C+RuO_(2) assembled Zn-air battery(ZAB),the FeCo/S-NC assembled ZAB exhibits a larger power density(198.8 mW cm^(-2)),a higher specific capacity(786.1 mA h g_(zn)~(-1)),and ultra-stable cycle performance.These results confirm that the optimized composition and the interfacial interaction between catalyst and carbon substrate synergistically enhance the electrochemical performance.展开更多
The photoreduction of CO_(2)into CH_(4)with simultaneous high activity and selectivity is a promising strategy to increase energy supply and alleviate global warming.However,the absence of the active sites that is res...The photoreduction of CO_(2)into CH_(4)with simultaneous high activity and selectivity is a promising strategy to increase energy supply and alleviate global warming.However,the absence of the active sites that is responsible for the adsorption and activation of CO_(2)and the generation of CO and H2via side reactions often lead to poor efficiency and low selectivity of the catalyst.Herein,Cu,Pd,and PdCu metal clusters cocatalyst-anchored defective TiO_(2)nanotubes(Cu/TiO_(2)-SBO,Pd/TiO_(2)-SBO,and Pd1Cu1/TiO_(2)-SBO)were designed via a simple solution impregnation reduction and applied for photocatalytic conversion of CO_(2)to CH_(4).The Pd1Cu1/TiO_(2)-SBO photocatalyst exhibits excellent catalytic performance among the other catalysts for photoreduction of CO_(2)into CH_(4).More interestingly,the product selectivity of CH_(4)reaches up to 100%with a rate of 25μmol g^(-1)h^(-1).In-situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and density functional theory(DFT)simulations indicate that the main reasons for the high selectivity of CH_(4)are attributed to the PdCu alloy and oxygen vacancies,which jointly enhance the photoinduced carrier separation and lower energy barriers of key intermediates.Moreover,due to the tunable d-band center of the Cu site in the PdCu alloy,the generated intermediates can be well prevented from poisoning and promoted to participate in further reactions.Hopefully,the current study will provide insight into the development of new,highly selective photocatalysts for the visible light-catalytic reduction of CO_(2)into CH_(4).展开更多
Materials for deep-ultraviolet(DUV)light emission are extremely rare,significantly limiting the development of efficient DUV light-emitting diodes.Here we report CsMg(I_(1−x)Br_(x))_(3) alloys as potential DUV light e...Materials for deep-ultraviolet(DUV)light emission are extremely rare,significantly limiting the development of efficient DUV light-emitting diodes.Here we report CsMg(I_(1−x)Br_(x))_(3) alloys as potential DUV light emitters.Based on rigorous first-principles hybrid functional calculations,we find that CsMgI_(3) has an indirect bandgap,while CsMgBr_(3) has a direct bandgap.Further,we employ a band unfolding technique for alloy supercell calculations to investigate the critical Br concentration in CsMg(I_(1−x)Br_(x))_(3) associated with the crossover from an indirect to a direct bandgap,which is found to be∼0.36.Thus,CsMg(I_(1−x)Br_(x))_(3) alloys with 0.366≤6≤1 cover a wide range of direct bandgap(4.38–5.37 eV;284–231 nm),falling well into the DUV regime.Our study will guide the development of efficient DUV light emitters.展开更多
Compared to the commercial soft-magnetic alloys,the high saturation magnetic flux density(Bs)and low coercivity(Hc)of post-developed novel nanocrystalline alloys tend to realize the miniaturization and lightweight of ...Compared to the commercial soft-magnetic alloys,the high saturation magnetic flux density(Bs)and low coercivity(Hc)of post-developed novel nanocrystalline alloys tend to realize the miniaturization and lightweight of electronic products,thus attracting great attention.In this work,we designed a new FeNiBCuSi formulation with a novel atomic ratio,and the microstructure evolution and magnetic softness were investigated.Microstructure analysis revealed that the amount of Si prompted the differential chemical fluctuations of Cu element,favoring the different nucleation and growth processes ofα-Fe nanocrystals.Furthermore,microstructural defects associated with chemical heterogeneities were unveiled using the Maxwell-Voigt model with two Kelvin units and one Maxwell unit based on creeping analysis by nanoindentation.The defect,with a long relaxation time in relaxation spectra,was more likely to induce the formation of crystal nuclei that ultimately evolved into theα-Fe nanocrystals.As a result,Fe_(84)Ni_(2)B_(12.5)Cu_(1)Si_(0.5)alloy with refined uniform nanocrystalline microstructure exhibited excellent magnetic softness,including a high B_(s)of 1.79 T and very low H_(c)of 2.8 A/m.Our finding offers new insight into the influence of activated defects associated with chemical heterogeneities on the microstructures of nanocrystalline alloy with excellent magnetic softness.展开更多
Mg-Gd alloy particle has exhibited its unique combustion properties as the fuel of Mg/Teflon/Viton(MTV).Mg-Gd alloy/Teflon/Viton(MGTV)could burn at lower ambient pressure than MTV.To further investigate the reaction o...Mg-Gd alloy particle has exhibited its unique combustion properties as the fuel of Mg/Teflon/Viton(MTV).Mg-Gd alloy/Teflon/Viton(MGTV)could burn at lower ambient pressure than MTV.To further investigate the reaction of MGTV in air,it was investigated via thermo gravity-differential scanning calorimetry(TG-DSC).Meanwhile,the morphologies and element distributions on the alloy surface during the reaction of MGTV in air were investigated via scanning electronic microscope-mapping-electronic differential spectrometer.Meanwhile,a similar experimental protocol on the Mg-Gd alloy particle during oxidation was also applied.The results showed that owning to a protective oxide shell,the onset oxidation temperature of Mg-Gd alloy is higher than Mg.However,the onset oxidation temperature of the exceeded Mg-Gd alloy in MGTV is significantly lower than that of the exceeded Mg in MTV.It was due to the existence of GdOF,which could significantly lower the oxidation temperature of the exceeded fuel.Furthermore,a possible reaction mechanism was proposed.The fascinating oxidation properties of Mg-Gd alloy suggested its promising applications in energetic materials.展开更多
Solid-state cooling technologies have been considered as potential alternatives for vapor compression cooling systems.The search for refrigeration materials displaying a unique combination of pronounced caloric effect...Solid-state cooling technologies have been considered as potential alternatives for vapor compression cooling systems.The search for refrigeration materials displaying a unique combination of pronounced caloric effect,low hysteresis,and high reversibility on phase transformation was very active in recent years.Here,we achieved increase in the elastocaloric reversibility and decrease in the friction dissipation of martensite transformations in the superelastic nano-grained NiTi alloys obtained by cold rolling and annealing treatment,with very low stress hysteresis(6.3 MPa)under a large applied strain(5%).Large adiabatic temperature changes(△T_(max)=16.3 K atε=5%)and moderate COP_(mater)values(maximum COP_(mater)=11.8 atε=2%)were achieved.The present nano-grained NiTi alloys exhibited great potential for applications as a highly efficient elastocaloric material.展开更多
Since the superior mechanical,chemical and physical properties of high-entropy alloys(HEAs)were discovered,they have gradually become new emerging candidates for renewable energy applications.This review presents the ...Since the superior mechanical,chemical and physical properties of high-entropy alloys(HEAs)were discovered,they have gradually become new emerging candidates for renewable energy applications.This review presents the novel applications of HEAs in thermoelectric energy conversion.Firstly,the basic concepts and structural properties of HEAs are introduced.Then,we discuss a number of promising thermoelectric materials based on HEAs.Finally,the conclusion and outlook are presented.This article presents an advanced understanding of the thermoelectric properties of HEAs,which provides new opportunities for promoting their applications in renewable energy.展开更多
The ocean is one of the essential fields of national defense in the future,and more and more attention is paid to the lightweight research of Marine equipment and materials.This study it is to develop a Machine learni...The ocean is one of the essential fields of national defense in the future,and more and more attention is paid to the lightweight research of Marine equipment and materials.This study it is to develop a Machine learning(ML)-based prediction method to study the evolution of the mechanical properties of Al-Li alloys in the marine environment.We obtained the mechanical properties of Al-Li alloy samples under uniaxial tensile deformation at different exposure times through Marine exposure experiments.We obtained the strain evolution by digital image correlation(DIC).The strain field images are voxelized using 2D-Convolutional Neural Networks(CNN)autoencoders as input data for Long Short-Term Memory(LSTM)neural networks.Then,the output data of LSTM neural networks combined with corrosion features were input into the Back Propagation(BP)neural network to predict the mechanical properties of Al-Li alloys.The main conclusions are as follows:1.The variation law of mechanical properties of2297-T8 in the Marine atmosphere is revealed.With the increase in outdoor exposure test time,the tensile elastic model of 2297-T8 changes slowly,within 10%,and the tensile yield stress changes significantly,with a maximum attenuation of 23.6%.2.The prediction model can predict the strain evolution and mechanical response simultaneously with an error of less than 5%.3.This study shows that a CNN/LSTM system based on machine learning can be built to capture the corrosion characteristics of Marine exposure experiments.The results show that the relationship between corrosion characteristics and mechanical response can be predicted without considering the microstructure evolution of metal materials.展开更多
基金supported by the National Natural Science Foundation of China under Grant No.10225417the National Basic Research Program of China under Grant No.2006CB601003。
文摘A high saturation magnetic flux density(Bs)is essential for the development of Fe-based amorphous alloys for electromagnetic devices and motors.However,achieving a high Bs often compromises the glass-forming ability(GFA)of Fe-based amorphous alloys.This study investigates the effects of ferromagnetic elements(Fe,Co,and Ni)on the microstructure and magnetic properties of Fe86B7C7 amorphous alloys through experiments and ab initio molecular dynamics simulations.By analyzing both the experimental and simulation results,the relationship between the atomic structures,GFA,and magnetic properties of these amorphous alloys was determined.The results indicate that the GFA of the alloys is correlated with the proportion of icosahedral and body-centered cubic clusters.The addition of Co and Ni not only improved the GFA of the alloys but also effectively increased the overall magnetic moment with an appropriate amount of Co and a small amount of Ni.This increase in the magnetic moment primarily arises from the enhancement of the magnetic moment of Fe atoms,resulting from the redistribution between the spin-up and spin-down electrons of Fe-3d orbits,as well as the strong exchange interactions between Fe and Co and Fe–Ni pairs.The results obtained offer valuable insights into the correlation between the atomic structure and magnetic properties of these amorphous alloys and suggest potential directions for the optimization of Fe-based amorphous alloys.
基金Project supported by funding from the National Natural Science Foundation of China(Grant Nos.52172258,52473227 and 52171150)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB0500200)。
文摘The unique long-range disordered atomic arrangement inherent in amorphous materials endows them with a range of superior properties,rendering them highly promising for applications in catalysis,medicine,and battery technology,among other fields.Since not all materials can be synthesized into an amorphous structure,the composition design of amorphous materials holds significant importance.Machine learning offers a valuable alternative to traditional“trial-anderror”methods by predicting properties through experimental data,thus providing efficient guidance in material design.In this study,we develop a machine learning workflow to predict the critical casting diameter,glass transition temperature,and Young's modulus for 45 ternary reported amorphous alloy systems.The predicted results have been organized into a database,enabling direct retrieval of predicted values based on compositional information.Furthermore,the applications of high glass forming ability region screening for specified system,multi-property target system screening and high glass forming ability region search through iteration are also demonstrated.By utilizing machine learning predictions,researchers can effectively narrow the experimental scope and expedite the exploration of compositions.
基金supported by the Scientific Research Program of Tianjin Education Committee(No.2022ZD030)。
文摘7075 aluminum alloy is often used as an important load-bearing structure in aircraft industry due to its superior mechanical properties.During the process of deep hole boring,the boring bar is prone to vibrate because of its limited machining space,bad environment and large elongation induced low stiffness.To reduce vibration and improve machined surface quality,a particle damping boring bar,filled with particles in its inside damping block,is designed based on the theory of vibration control.The theoretical damping coefficient is determined,then the boring bar structure is designed and trial-manufactured.Experimental studies through impact testing show that cemented carbide particles with a diameter of 5 mm and a filling rate of 70% achieve a damping ratio of 19.386%,providing excellent vibration reduction capabilities,which may reduce the possibility of boring vibration.Then,experiments are setup to investigate its vibration reduction performance during deep hole boring of 7075 aluminum alloy.To observe more obviously,severe working conditions are adopted and carried out to acquire the time domain vibration signal of the head of the boring bar and the surface morphologies and roughness values of the workpieces.By comparing different experimental results,it is found that the designed boring bar could reduce the maximum vibration amplitude by up to 81.01% and the surface roughness value by up to 47.09% compared with the ordinary boring bar in two sets of experiments,proving that the designed boring bar can effectively reduce vibration.This study can offer certain valuable insights for the machining of this material.
基金Project supported by the National Key R&D Program of China (Grant Nos. 2022YFA1602602 and 2023YFA1609600)the National Natural Science Foundation of China (Grant No. U23A20580)+3 种基金the open research fund of Songshan Lake Materials Laboratory (Grant No. 2022SLABFN27)Beijing National Laboratory for Condensed Matter Physics (Grant No. 2024BNLCMPKF004)Guangdong Basic and Applied Basic Research Foundation (Grant No. 2022B1515120020)the interdisciplinary program of Wuhan National High Magnetic Field Center at Huazhong University of Science and Technology (Grant No. WHMFC202132)。
文摘Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we perform systematic studies on the elastic properties of the Cu–6wt% Ag alloy wire, which is a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques, i.e., resonant ultrasound spectroscopy(RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu–6wt% Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this opportunity to test the availability of our newly-built ultrasound pulse-echo facility at the Wuhan National High Magnetic Field Center(WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu–6wt% Ag alloy wire remains excellent without anomalous softening under extreme conditions,e.g., in ultra-high magnetic field up to 50 T and nitrogen or helium cryogenic liquids.
基金supported by the Prospective Basic Research Projects of CNPC(Grant Nos.2022DJ5406,2022DJ5407,2022DJ5408,2022DJ4507,TGRI-2021-1,2022DQ03-03).
文摘Aqueous zinc-ion batteries(AZIBs)present a promising option for next-generation batteries given their high safety,eco-friendliness,and resource sustainability.Nonetheless,the practical application of zinc anodes is hindered by inevitable parasitic reactions and dendrite growth.Here,zinc alloy layers(i.e.,ZnCo and ZnFe alloys)were rationally constructed on the zinc surface by chemical displacement reactions.The alloying process exposes more(002)planes of the ZnCo anode to guide the preferential and dendrite-free zinc deposition.Furthermore,the ZnCo alloy layer not only effectively inhibits water-induced side reactions but also accelerates electrode kinetics,enabling highly reversible zinc plating/stripping.As a result,the ZnCo anode achieves a Coulombic efficiency of 99.2%over 1300 cycles,and the ZnCo symmetric cell exhibits a long cycle life of over 2000 h at 4.4 mA cm^(-2).Importantly,the ZnCo//NH_(4)V_(4)O_(10)full cell retains a high discharge capacity of 218.4 mAh g^(-1)after 800 cycles.Meanwhile,the ZnFe-based symmetric cell also displays excellent cycling stability over 2500 h at 1.77 mA cm^(-2).This strategy provides a facile anode modification approach toward high-performance AZIBs.
文摘This work aimed to(i)understand conventional and pulse gas tungsten arc welding(GTAW)of AZ31B,and(ii)explore high frequency welding(100 Hz-1500 Hz).GTA welding with alternating current(AC)and direct current electrode positive(DCEP)polarities yielded crack-free partial penetration welds for6 mm thick AZ31B alloy sheet.Welding under direct current electrode negative(DCEN)polarity with identical parameters as that for AC and DCEP resulted in full penetration welds that had microcracks.Defect-free full-penetration welds could be accomplished with pulse GTA welding using DCEN polarity at a pulse frequency of 1 Hz with a pulse duration ratio of 1:1.The resultant DCEN P 1:1 weld metal had a microstructure finer than the conventional DCEN weld.Welds produced with pulse duration ratios of 1:2and 1:4 lacked penetration but had a much finer microstructures because of the lower heat input.The arc constriction by the high frequency pulsing in the Activ Arc■-High frequency(AA-HF)mode welding was responsible for deeper penetration.Welds produced under DCEN pulsing and AA-HF conditions had hardness higher than conventional DCEN,DCEP and AC GTA welds,attributed to the finer microstructure.AA-HF GTA welding produced defect free deeper penetration welds with good microstructural features/mechanical properties and also gave an advantage of 50%enhanced productivity when welded at1500 Hz.
基金Project supported by the National Natural Science Foundation of China (Grant No. 52271105)。
文摘Uranium–molybdenum(U–Mo) alloys are critical for nuclear power generation and propulsion because of their superior thermal conductivity, irradiation stability, and anti-swelling properties. This study explores the plastic deformation mechanisms of γ-phase U–Mo alloys using molecular dynamics(MD) simulations. In the slip model, the generalized stacking fault energy(GSFE) and the modified Peierls–Nabarro(P–N) model are used to determine the competitive relationships among different slip systems. In the twinning model, the generalized plane fault energy(GPFE) is assessed to evaluate the competition between slip and twinning. The findings reveal that among the three slip systems, the {110}<111>slip system is preferentially activated, while in the {112}<111> system, twinning is favored over slip, as confirmed by MD tensile simulations conducted in various directions. Additionally, the impact of Mo content on deformation behavior is emphasized. Insights are provided for optimizing process conditions to avoid γ → α′′ transitions, thereby maintaining a higher proportion of γ-phase U–Mo alloys for practical applications.
基金Project supported by the National Natural Science Foundation of China(Grant No.52275567)the Key Research and Development Program of Shanxi Province,China(Grant No.202202050201020)+3 种基金the Doctoral Starting-up Foundation of Taiyuan University of Science and Technology(Grant No.20192016)the Research Project Supported by Shanxi Scholarship Council(Grant No.2017-085)the Graduate Education and Teaching Reform Project of Shanxi Province,China(Grant No.2023JG136)the Special Fund for Science and Technology Innovation Teams of Shanxi Province,China(Grant No.202304051001036)。
文摘This work investigated the microstructure,magnetic properties,and crystallization kinetics of the as-spun and annealed alloy ribbons of(Fe_(40-x)Co_xNi_(40)Si_(6.33)B_(12.66)Cu_1)_(0.97)Nb_(0.03),where x=0,6,7,8,9,prepared using the meltspinning method.The results show that adding a moderate amount of Co can improve the glass forming ability(GFA),the first peak crystallization temperature,and thermal stability of the as-spun alloy ribbons.With x=7,the two-stage crystallization temperature interval△Tx=90 exhibits optimal thermal stability,and the alloy annealed at 673 K for 10 minutes shows the favorable combined magnetic properties,with H_(c)=0.12 A/m,M_(s)=88.7 A·m^(2)/kg,andμ_(e)=13800.The magnetic domain results show that annealing removes numerous pinning points in the magnetic domains of the alloy ribbons,making the domain walls smoother and effectively reducing the pinning effect.
基金financially supported by the Key Research and Development Program of Ningbo(Grant No.2023Z098)Natural Science Foundation of Inner Mongolia(Grant No.2023MS05040)+1 种基金Shenyang Collaborative Innovation Center Project for Multiple Energy Fields Composite Processing of Special Materials(Grant No.JG210027)Shenyang Key Technology Special Project of The Open Competition Mechanism to Select the Best Solution(Grant Nos.2022210101000827,2022-0-43-048).
文摘Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other fields.In recent years,with the continuous increase in demand for medium-thick plate titanium alloys,corresponding welding technologies have also continued to develop.Therefore,this article reviews the research progress of deep penetration welding technology for medium-thick plate titanium alloys,mainly covering traditional arc welding,high-energy beam welding,and other welding technologies.Among many methods,narrow gap welding,hybrid welding,and external energy field assistance welding all contribute to improving the welding efficiency and quality of medium-thick plate titanium alloys.Finally,the development trend of deep penetration welding technology for mediumthick plate titanium alloys is prospected.
基金financially supported by the National Natural Science Foundation of China(22205205,22472151)the Zhejiang Provincial Natural Science Foundation of China(LQ22B030008)the Science Foundation of Zhejiang Sci-Tech University(ZSTU)under Grant No.21062337-Y.
文摘Constructing electrocatalytic overall reaction technology to couple the electrosynthesis of adipic acid with energy-saving hydrogen production is of significant for sustainable energy systems.However,the development of highly-active bifunctional electrocatalysts remains a challenge.Herein,3D hierarchical nickel-copper alloying arrays with dendritic morphology are manufactured by a simple electrodeposition process,standing for the excellent bifunctional electrocatalyst towards the co-production of adipic acid and H_(2)from cyclohexanone and water.The membrane-free flow electrolyzer of Cu_(0.81)Ni_(0.19)/NF shows the superior electrooxidation performance of ketone-alcohol(KA)oil with high faradaic efficiencies of over 90%for adipic acid and H_(2),robust stability over 200 h as well as a high yield of 0.6 mmol h^(-1) for adipic acid at 100 mA cm^(-2).In-situ spectroscopy indicates the Cu_(0.81)Ni_(0.19)alloy contributes to forming more active NiOOH species to involve in the conversion of cyclohexanone to adipic acid,while the proposed reaction pathway undergoes the 2-hydroxycyclohexanone and 2,7-oxepanedione intermediates.Moreover,the theoretical calculations confirm that the optimal electronic interaction,boosted reaction kinetics as well as improved adsorption free energy of reaction intermediates,synergistically endows Cu_(0.81)Ni_(0.19)alloy with superior bifunctional performance.
基金Longyuan Youth Innovative and Entrepreneurial Talents ProjectProgram for Top Leading Talents of Gansu Province。
文摘Electrochemical reduction of NO_(2)-to NH_(3)(NO_(2)-RR) is recognized as an appealing approach for achieving renewable NH_(3)synthesis and waste NO_(2)-removal.Herein,we report isolated Bi alloyed Ru (Bi1Ru) as an efficient NO_(2)-RR catalyst.Theoretical calculations and in situ electrochemical measurements reveal the creation of Bi1-Ru dual sites which can remarkably promote NO_(2)-activation and suppress proton adsorption,while accelerating the NO_(2)-RR protonation energetics to render a high NO_(2)--to-NH_(3)conversion efficiency.Remarkably,Bi1Ru assembled in a flow cell delivers an NH_(3)yield rate of 1901.4μmol h^(-1)cm^(-2)and an NH_(3)-Faradaic efficiency of 94.3%at an industrial-level current density of 324.3 mA cm^(-2).This study offers new perspectives for designing and constructing p-block single-atom alloys as robust and high-current-density NO_(2)-RR catalysts toward the ammonia electrosynthesis.
基金supported by the National Natural Science Foundation of China(Nos.12022515 and 11975304)the Youth Innovation Promotion Association,Chinese Academy of Sciences(No.Y202063)。
文摘The synergistic damage effect of irradiation and corrosion of reactor structural materials has been a prominent research focus.This paper provides a comprehensive review of the synergistic effects on the third-and fourth-generation fission nuclear energy structural materials used in pressurized water reactors and molten salt reactors.The competitive mechanisms of multiple influencing factors,such as the irradiation dose,corrosion type,and environmental temperature,are summarized in this paper.Conceptual approaches are proposed to alleviate the synergistic damage caused by irradiation and corrosion,thereby promoting in-depth research in the future and solving this key challenge for the structural materials used in reactors.
基金supported by the National Natural Science Foundation of China(52374301 and 22279030)the Fundamental Research Funds for the Central Universities(N2223037)+1 种基金Hebei Key Laboratory of Dielectric and Electrolyte Functional Material,Northeastern University at Qinhuangdao(HKDEFM2021201)the Performance subsidy fund for the Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province(22567627H)。
文摘The interface mechanism between catalyst and carbon substrate has been the focus of research.In this paper,the FeCo alloy embedded N,S co-doped carbon substrate bifunctional catalyst(FeCo/S-NC)is obtained by a simple one-step pyrolysis strategy.The experimental results and density functional theory(DFT)calculation show that the formation of FeCo alloy is conducive to promoting electron transfer,and the introduction of S atom can enhance the interaction between FeCo alloy and carbon substrate,thus inhibiting the migration and agglomeration of particles on the surface of carbon material.The FeCo/SNC catalysts show outstanding performance for oxygen reduction reaction(ORR)and oxygen evolution reaction(OER).FeCo/S-NC shows a high half-wave potential(E_(1/2)=0.8823 V)for ORR and a low overpotential at 10 mA cm^(-2)(E_(j=10)=299 mV)for OER.In addition,compared with Pt/C+RuO_(2) assembled Zn-air battery(ZAB),the FeCo/S-NC assembled ZAB exhibits a larger power density(198.8 mW cm^(-2)),a higher specific capacity(786.1 mA h g_(zn)~(-1)),and ultra-stable cycle performance.These results confirm that the optimized composition and the interfacial interaction between catalyst and carbon substrate synergistically enhance the electrochemical performance.
基金the financial support from the Program for Innovative Research Team in University of Henan Province(21IRTSTHN009)Science and Technology Fund of Henan Province(225200810051)Natural Science Foundation of Henan Province(222300420406)。
文摘The photoreduction of CO_(2)into CH_(4)with simultaneous high activity and selectivity is a promising strategy to increase energy supply and alleviate global warming.However,the absence of the active sites that is responsible for the adsorption and activation of CO_(2)and the generation of CO and H2via side reactions often lead to poor efficiency and low selectivity of the catalyst.Herein,Cu,Pd,and PdCu metal clusters cocatalyst-anchored defective TiO_(2)nanotubes(Cu/TiO_(2)-SBO,Pd/TiO_(2)-SBO,and Pd1Cu1/TiO_(2)-SBO)were designed via a simple solution impregnation reduction and applied for photocatalytic conversion of CO_(2)to CH_(4).The Pd1Cu1/TiO_(2)-SBO photocatalyst exhibits excellent catalytic performance among the other catalysts for photoreduction of CO_(2)into CH_(4).More interestingly,the product selectivity of CH_(4)reaches up to 100%with a rate of 25μmol g^(-1)h^(-1).In-situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and density functional theory(DFT)simulations indicate that the main reasons for the high selectivity of CH_(4)are attributed to the PdCu alloy and oxygen vacancies,which jointly enhance the photoinduced carrier separation and lower energy barriers of key intermediates.Moreover,due to the tunable d-band center of the Cu site in the PdCu alloy,the generated intermediates can be well prevented from poisoning and promoted to participate in further reactions.Hopefully,the current study will provide insight into the development of new,highly selective photocatalysts for the visible light-catalytic reduction of CO_(2)into CH_(4).
基金supported by the National Natural Science Foundation of China(Grant Nos.52172136,12088101,11991060,and U2230402)。
文摘Materials for deep-ultraviolet(DUV)light emission are extremely rare,significantly limiting the development of efficient DUV light-emitting diodes.Here we report CsMg(I_(1−x)Br_(x))_(3) alloys as potential DUV light emitters.Based on rigorous first-principles hybrid functional calculations,we find that CsMgI_(3) has an indirect bandgap,while CsMgBr_(3) has a direct bandgap.Further,we employ a band unfolding technique for alloy supercell calculations to investigate the critical Br concentration in CsMg(I_(1−x)Br_(x))_(3) associated with the crossover from an indirect to a direct bandgap,which is found to be∼0.36.Thus,CsMg(I_(1−x)Br_(x))_(3) alloys with 0.366≤6≤1 cover a wide range of direct bandgap(4.38–5.37 eV;284–231 nm),falling well into the DUV regime.Our study will guide the development of efficient DUV light emitters.
基金Project supported by the Anhui Provincial Natural Science Foundation(Grant No.2208085QE121)the Key Research&Development Plan of Anhui Province(Grant No.2022a05020016)+1 种基金the University Natural Science Research Project of Anhui Province(Grant No.2023AH051084)the National Natural Science Foundation of China(Grant No.52071078)。
文摘Compared to the commercial soft-magnetic alloys,the high saturation magnetic flux density(Bs)and low coercivity(Hc)of post-developed novel nanocrystalline alloys tend to realize the miniaturization and lightweight of electronic products,thus attracting great attention.In this work,we designed a new FeNiBCuSi formulation with a novel atomic ratio,and the microstructure evolution and magnetic softness were investigated.Microstructure analysis revealed that the amount of Si prompted the differential chemical fluctuations of Cu element,favoring the different nucleation and growth processes ofα-Fe nanocrystals.Furthermore,microstructural defects associated with chemical heterogeneities were unveiled using the Maxwell-Voigt model with two Kelvin units and one Maxwell unit based on creeping analysis by nanoindentation.The defect,with a long relaxation time in relaxation spectra,was more likely to induce the formation of crystal nuclei that ultimately evolved into theα-Fe nanocrystals.As a result,Fe_(84)Ni_(2)B_(12.5)Cu_(1)Si_(0.5)alloy with refined uniform nanocrystalline microstructure exhibited excellent magnetic softness,including a high B_(s)of 1.79 T and very low H_(c)of 2.8 A/m.Our finding offers new insight into the influence of activated defects associated with chemical heterogeneities on the microstructures of nanocrystalline alloy with excellent magnetic softness.
文摘Mg-Gd alloy particle has exhibited its unique combustion properties as the fuel of Mg/Teflon/Viton(MTV).Mg-Gd alloy/Teflon/Viton(MGTV)could burn at lower ambient pressure than MTV.To further investigate the reaction of MGTV in air,it was investigated via thermo gravity-differential scanning calorimetry(TG-DSC).Meanwhile,the morphologies and element distributions on the alloy surface during the reaction of MGTV in air were investigated via scanning electronic microscope-mapping-electronic differential spectrometer.Meanwhile,a similar experimental protocol on the Mg-Gd alloy particle during oxidation was also applied.The results showed that owning to a protective oxide shell,the onset oxidation temperature of Mg-Gd alloy is higher than Mg.However,the onset oxidation temperature of the exceeded Mg-Gd alloy in MGTV is significantly lower than that of the exceeded Mg in MTV.It was due to the existence of GdOF,which could significantly lower the oxidation temperature of the exceeded fuel.Furthermore,a possible reaction mechanism was proposed.The fascinating oxidation properties of Mg-Gd alloy suggested its promising applications in energetic materials.
基金Project supported by the Science Fund of the Key Laboratory of Cryogenic Science and Technology(Grant Nos.CRYO20230203 and CRYO202106)the National Natural Science Foundation of China(Grant Nos.51872299 and 52071223)the National Key Research and Development Program of China(Grant No.2019YFA0704904)。
文摘Solid-state cooling technologies have been considered as potential alternatives for vapor compression cooling systems.The search for refrigeration materials displaying a unique combination of pronounced caloric effect,low hysteresis,and high reversibility on phase transformation was very active in recent years.Here,we achieved increase in the elastocaloric reversibility and decrease in the friction dissipation of martensite transformations in the superelastic nano-grained NiTi alloys obtained by cold rolling and annealing treatment,with very low stress hysteresis(6.3 MPa)under a large applied strain(5%).Large adiabatic temperature changes(△T_(max)=16.3 K atε=5%)and moderate COP_(mater)values(maximum COP_(mater)=11.8 atε=2%)were achieved.The present nano-grained NiTi alloys exhibited great potential for applications as a highly efficient elastocaloric material.
基金Project supported by the Natural Science Foundation of Jiangsu Province of China(Grant Nos.BK20220407 and BK20220428)。
文摘Since the superior mechanical,chemical and physical properties of high-entropy alloys(HEAs)were discovered,they have gradually become new emerging candidates for renewable energy applications.This review presents the novel applications of HEAs in thermoelectric energy conversion.Firstly,the basic concepts and structural properties of HEAs are introduced.Then,we discuss a number of promising thermoelectric materials based on HEAs.Finally,the conclusion and outlook are presented.This article presents an advanced understanding of the thermoelectric properties of HEAs,which provides new opportunities for promoting their applications in renewable energy.
基金supported by the Southwest Institute of Technology and Engineering cooperation fund(Grant No.HDHDW5902020104)。
文摘The ocean is one of the essential fields of national defense in the future,and more and more attention is paid to the lightweight research of Marine equipment and materials.This study it is to develop a Machine learning(ML)-based prediction method to study the evolution of the mechanical properties of Al-Li alloys in the marine environment.We obtained the mechanical properties of Al-Li alloy samples under uniaxial tensile deformation at different exposure times through Marine exposure experiments.We obtained the strain evolution by digital image correlation(DIC).The strain field images are voxelized using 2D-Convolutional Neural Networks(CNN)autoencoders as input data for Long Short-Term Memory(LSTM)neural networks.Then,the output data of LSTM neural networks combined with corrosion features were input into the Back Propagation(BP)neural network to predict the mechanical properties of Al-Li alloys.The main conclusions are as follows:1.The variation law of mechanical properties of2297-T8 in the Marine atmosphere is revealed.With the increase in outdoor exposure test time,the tensile elastic model of 2297-T8 changes slowly,within 10%,and the tensile yield stress changes significantly,with a maximum attenuation of 23.6%.2.The prediction model can predict the strain evolution and mechanical response simultaneously with an error of less than 5%.3.This study shows that a CNN/LSTM system based on machine learning can be built to capture the corrosion characteristics of Marine exposure experiments.The results show that the relationship between corrosion characteristics and mechanical response can be predicted without considering the microstructure evolution of metal materials.
