Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coa...Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coal Mining Abatement Technology Support Package(CMATSP), threedimensional CFD simulations were conducted to test and optimise a conceptual design which proposes using horizontal boreholes to replace vertical boreholes at an underground coal mine in Australia.Drainage performance between a vertical borehole and a horizontal borehole was first carried out to compare their capacity and effectiveness. Then a series of cases with different horizontal borehole designs were simulated to optimise borehole configuration parameters such as location, diameter, and number of boreholes. The study shows that the horizontal borehole is able to create low pressure sinks that protect the workings from goaf gas ingresses by changing goaf gas flow directions, and that it has the advantage to continuously maintain such low pressure sinks near the tailgate as the longwall advances. An example of optimising horizontal borehole locations in the longwall lateral direction is also given in this paper.展开更多
A movement law of laser beam facula is designed for the injection trajectory of hyper-ve- locity kinetic energy missile to eliminate the influence of motor exhaust smoke on laser signal trans mission. Taking guidance...A movement law of laser beam facula is designed for the injection trajectory of hyper-ve- locity kinetic energy missile to eliminate the influence of motor exhaust smoke on laser signal trans mission. Taking guidance loop of hyper velocity kinetic energy missile as plant, a closed loop control system with desired step response characteristics is constructed and the movement law of laser beam facula for the missile injection trajectory is designed based on the output signal of the closed loop controller under a step input. Six degree of freedom trajectory simulations show that by the guidance of the laser beam facula moving with designed law, the missile can finish transition from the initial trajectory to a stable tracking trajectory without overshoot within the required time.展开更多
Rational design of ionic liquids(ILs),which is highly dependent on the accuracy of the model used,has always been crucial for CO_(2)separation from flue gas.In this study,a support vector machine(SVM)model which is a ...Rational design of ionic liquids(ILs),which is highly dependent on the accuracy of the model used,has always been crucial for CO_(2)separation from flue gas.In this study,a support vector machine(SVM)model which is a machine learning approach is established,so as to improve the prediction accuracy and range of IL melting points.Based on IL melting points data with 600 training data and 168 testing data,the estimated average absolute relative deviations(AARD)and squared correlation coefficients(R^(2))are 3.11%,0.8820 and 5.12%,0.8542 for the training set and testing set of the SVM model,respectively.Then,through the melting points model and other rational design processes including conductor-like screening model for real solvents(COSMO-RS)calculation and physical property constraints,cyano-based ILs are obtained,in which tetracyanoborate[TCB]-is often ruled out due to incorrect estimation of melting points model in the literature.Subsequently,by means of process simulation using Aspen Plus,optimal IL are compared with excellent IL reported in the literature.Finally,1-ethyl-3-methylimidazolium tricyanomethanide[EMIM][TCM]is selected as a most suitable solvent for CO_(2)separation from flue gas,the process of which leads to 12.9%savings on total annualized cost compared to that of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide[EMIM][Tf_(2)N].展开更多
The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the...The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the most efficient non-induction device can heat the plasma and drive the plasma current has been efficiently in operation 'owl and a particular design of the 2.8 MW/-35 kV high-voltage DC power supply has been already completed and will apply to the klystron of LHCD on HT-7 and the future HT-7U, and the project of the power supply has been examined and approved professionally by an authorized group of high-level specialist in the institute of Plasma Physics. The detailed design of the power supply and the simulation results are referred in the paper.展开更多
In this paper,a time of flight neutron reflectometer model is proposed.According to the original objective inputting physical parameters and expectations,computer simulation was done by McStas package.With the open sl...In this paper,a time of flight neutron reflectometer model is proposed.According to the original objective inputting physical parameters and expectations,computer simulation was done by McStas package.With the open slit, neutron flux at sample position was about 1×10~5 n·cm^(-2)·S^(-1),and the optimal resolution could reach 0.5%.The results show that the model has a good performance.The design of this model can be an instruction for neutron reflectometer construction or project analysis in the future.展开更多
Fluorescence collector is a critical component in optically pumped Cs beam frequency standards. We design a new fluorescence collector by means of a new method. By means of two simulation methods, a smaller fluorescen...Fluorescence collector is a critical component in optically pumped Cs beam frequency standards. We design a new fluorescence collector by means of a new method. By means of two simulation methods, a smaller fluorescence collector with the same collection efficiency is achieved. It can be applied to almost all fluorescence detection systems in atom-light interaction experiments. We select the practical fluorescence collector studied by comparing three designing schemes. Its structure is very plain. Moreover, its fluorescence collection efficiency is very high. The collection efficiency of the practical fluorescence collector we designed is over 33% by means of two different ways.展开更多
We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can rand...We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can randomly output the signal in 25 ns. The design is based on true random number generator （TRNG）. Considering the electrical connection between the TGC source and the developing trigger electronics, the GFZ connector is used. The experimental results show that the improved TGC simulation signal source can uniformly output the random signal in every channel. The output noise is less than 3 mVrms.展开更多
Tubular hydroforming has attracted increased attention in the vehicle industry recently. This paper covers a complete hydroforming process design for an instrum ent panel frame by finite element simulation using the e...Tubular hydroforming has attracted increased attention in the vehicle industry recently. This paper covers a complete hydroforming process design for an instrum ent panel frame by finite element simulation using the explicit code LS-DYNA. The manufacturing process for the instrument panel frame consists of tube pre-be nding and final hydroforming. To accomplish hydroforming process design successf ully, a thorough investigation of proper combination of process parameters such as internal hydraulic pressure and axial feeding is carried out by finite element simulation to predict the tube wall thickness and shape. An optimized process parameter combination is obtained and verified by the instrument panel frame hyd roforming experiment. The experiment shows that designed process parameters can be used in real production through FEA simulation, but tubular thinned amplitu de by FEA is less than that with the experiment.展开更多
A method for designing an X-ray flatness filter for medical electron linac is developed. It is used in the optimization process in the electron beam radiation system. Monte Carlo simulation method is used and two exam...A method for designing an X-ray flatness filter for medical electron linac is developed. It is used in the optimization process in the electron beam radiation system. Monte Carlo simulation method is used and two examples of real radiation system optimization processes for China-made medical electron linac are provided： 15 MV X- ray system of BJ-20 linac, and 12 MeV electron system of BJ-14. Results are verified by using the traditional method.展开更多
The impedance of a solid state active phased array antenna varing with frequency and beam scanning scanning angle be matched with the solid state active matching network (SSAMN). In order to adjust and measure the rad...The impedance of a solid state active phased array antenna varing with frequency and beam scanning scanning angle be matched with the solid state active matching network (SSAMN). In order to adjust and measure the radar conveniently and Securely, it is necessary for the impedance of the simulator of the phased array antennas to be optimized.Having selected the PIN dilde controlling circuits and the circuit parameters optimized,the simulator circuit is determined through numerical computation The experiment is given in support of the simulation.展开更多
Engineering change management is a special form of problem solving where many rules must be followed to satisfy the requirements of product changes.As engineering change has great influence on the cycle and the cost o...Engineering change management is a special form of problem solving where many rules must be followed to satisfy the requirements of product changes.As engineering change has great influence on the cycle and the cost of product development,it is necessary to anticipate design changes(DCs)in advance and estimate the influence effectively.A process simulation-based method for engineering change management is proposed incorporating multiple assessment parameters.First,the change propagation model is established,which includes the formulation of change propagation influence,assessment score of DC solution.Then the optimization process of DC solution is introduced based on ant colony optimization(ACO),and an optimization algorithm is detailed to acquire the optimal DC solution automatically.Finally,a case study of belt conveyor platform is implemented to validate the proposed method.The results show that changed requirement of product can be satisfied by multiple DC solutions and the optimal one can be acquired according to the unique characteristics of each solution.展开更多
The characteristics of the design resources in the ship collaborative design is described and the hierarchical model for the evaluation of the design resources is established. The comprehensive evaluation of the co-de...The characteristics of the design resources in the ship collaborative design is described and the hierarchical model for the evaluation of the design resources is established. The comprehensive evaluation of the co-designers for the collaborative design resources has been done from different aspects using Analytic Hierarchy Process （AHP） ,and according to the evaluation results,the candidates are determined. Meanwhile,based on the principle of minimum cost,and starting from the relations between the design tasks and the corresponding co-designers,the optimizing selection model of the collaborators is established and one novel genetic combined with simulated annealing algorithm is proposed to realize the optimization. It overcomes the defects of the genetic algorithm which may lead to the premature convergenee and local optimization if used individually. Through the application of this method in the ship collaborative design system,it proves the feasibility and provides a quantitative method for the optimizing selection of the design resources.展开更多
A Verilog-VHDL translating method directed by simulation semantics is presented. Based on the analysis and comparison, three steps are taken to implement the translation. Through semantic analyzing and syntax tree rec...A Verilog-VHDL translating method directed by simulation semantics is presented. Based on the analysis and comparison, three steps are taken to implement the translation. Through semantic analyzing and syntax tree reconstructing before translation, the main part of Verilog is supported. According to the level in the design hierarchy, the modules are translated in down-top order, and that results in a correct VHDL declaration-reference order. The translation rules of assignment statements and delay/timing constructs are also explained in detail. This method has been successfully implemented in the translator developed by the authors. The correctness has been validated by many examples.展开更多
In this paper a new spherical actuator is designed and its advantages are compared to an existing spherical actuator, which function is limited by several design bottlenecks. First the output torque is too small. Seco...In this paper a new spherical actuator is designed and its advantages are compared to an existing spherical actuator, which function is limited by several design bottlenecks. First the output torque is too small. Second, the attitude is difficult to be accurately detected. The new three-dimen- sional magnetic pole array can solve these major problems. The new actuator features an outer rotor with multiple permanent magnet （PM） poles. Using an analytical solution and the finite element so- lution simulation, the feasibility of the approach is verified. A prototype was developed, tested, and experiments were conducted to obtain the practical value of the magnetic flux density.展开更多
The whole superconducting HT-7U Tokamak is a high-cost and large-scale complicated device. The assembly requirement of HT-7U device is arduous and strict. At present, there have been no guiding principle for the assem...The whole superconducting HT-7U Tokamak is a high-cost and large-scale complicated device. The assembly requirement of HT-7U device is arduous and strict. At present, there have been no guiding principle for the assembly of the device, but assembly simulation can help the engineer plan and make decision by an intuitional and visual way before its actual assembly. The problem is that which scheme is most suitable should be solved primarily. From current research situation and technology progress of assembly simulation, this paper explained and analyzed four kinds of technological schemes of assembly simulation in common use. Finally, we got the most feasible scheme that was suitable for HT-7U assembly simulation by comparing their technological issues and difficult points of simulation among the four kinds of feasible schemes.展开更多
A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented f...A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented first. Hierarchical technique, control strategy based on multi-agent and simulation output analysis are depicted in detail then. In the end, an application example is taken out to prove that this system could be used to analyzing different hypothetical situation and configuring the auxiliary manufacturing system before production.展开更多
基金the Department of Industry and Science,Australian Government for funding this researchthe management and staff of Glencore Bulga Underground Operations for their significant contributions in this project
文摘Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coal Mining Abatement Technology Support Package(CMATSP), threedimensional CFD simulations were conducted to test and optimise a conceptual design which proposes using horizontal boreholes to replace vertical boreholes at an underground coal mine in Australia.Drainage performance between a vertical borehole and a horizontal borehole was first carried out to compare their capacity and effectiveness. Then a series of cases with different horizontal borehole designs were simulated to optimise borehole configuration parameters such as location, diameter, and number of boreholes. The study shows that the horizontal borehole is able to create low pressure sinks that protect the workings from goaf gas ingresses by changing goaf gas flow directions, and that it has the advantage to continuously maintain such low pressure sinks near the tailgate as the longwall advances. An example of optimising horizontal borehole locations in the longwall lateral direction is also given in this paper.
文摘A movement law of laser beam facula is designed for the injection trajectory of hyper-ve- locity kinetic energy missile to eliminate the influence of motor exhaust smoke on laser signal trans mission. Taking guidance loop of hyper velocity kinetic energy missile as plant, a closed loop control system with desired step response characteristics is constructed and the movement law of laser beam facula for the missile injection trajectory is designed based on the output signal of the closed loop controller under a step input. Six degree of freedom trajectory simulations show that by the guidance of the laser beam facula moving with designed law, the missile can finish transition from the initial trajectory to a stable tracking trajectory without overshoot within the required time.
基金the financial support by the National Natural Science Foundation of China(Project No.21878054)the Natural Science Foundation of Fujian Province of China(2020J01515)
文摘Rational design of ionic liquids(ILs),which is highly dependent on the accuracy of the model used,has always been crucial for CO_(2)separation from flue gas.In this study,a support vector machine(SVM)model which is a machine learning approach is established,so as to improve the prediction accuracy and range of IL melting points.Based on IL melting points data with 600 training data and 168 testing data,the estimated average absolute relative deviations(AARD)and squared correlation coefficients(R^(2))are 3.11%,0.8820 and 5.12%,0.8542 for the training set and testing set of the SVM model,respectively.Then,through the melting points model and other rational design processes including conductor-like screening model for real solvents(COSMO-RS)calculation and physical property constraints,cyano-based ILs are obtained,in which tetracyanoborate[TCB]-is often ruled out due to incorrect estimation of melting points model in the literature.Subsequently,by means of process simulation using Aspen Plus,optimal IL are compared with excellent IL reported in the literature.Finally,1-ethyl-3-methylimidazolium tricyanomethanide[EMIM][TCM]is selected as a most suitable solvent for CO_(2)separation from flue gas,the process of which leads to 12.9%savings on total annualized cost compared to that of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide[EMIM][Tf_(2)N].
文摘The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the most efficient non-induction device can heat the plasma and drive the plasma current has been efficiently in operation 'owl and a particular design of the 2.8 MW/-35 kV high-voltage DC power supply has been already completed and will apply to the klystron of LHCD on HT-7 and the future HT-7U, and the project of the power supply has been examined and approved professionally by an authorized group of high-level specialist in the institute of Plasma Physics. The detailed design of the power supply and the simulation results are referred in the paper.
基金Supported by grants from Science and Technology Development Foundation of CAEP(2007B02002)
文摘In this paper,a time of flight neutron reflectometer model is proposed.According to the original objective inputting physical parameters and expectations,computer simulation was done by McStas package.With the open slit, neutron flux at sample position was about 1×10~5 n·cm^(-2)·S^(-1),and the optimal resolution could reach 0.5%.The results show that the model has a good performance.The design of this model can be an instruction for neutron reflectometer construction or project analysis in the future.
基金Supported by the National Special Research Program for Major Scientific Instruments and Equipment of China under Grant No Y329KJ1101the Chinese PLA General Armament Department's Special Research Program for Fundamental Technology under Grant No Y333JK2101
文摘Fluorescence collector is a critical component in optically pumped Cs beam frequency standards. We design a new fluorescence collector by means of a new method. By means of two simulation methods, a smaller fluorescence collector with the same collection efficiency is achieved. It can be applied to almost all fluorescence detection systems in atom-light interaction experiments. We select the practical fluorescence collector studied by comparing three designing schemes. Its structure is very plain. Moreover, its fluorescence collection efficiency is very high. The collection efficiency of the practical fluorescence collector we designed is over 33% by means of two different ways.
基金Supported by the State Key Laboratory of Particle Detection and Electronicsthe National Natural Science Foundation of China under Grant No 11375179
文摘We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can randomly output the signal in 25 ns. The design is based on true random number generator （TRNG）. Considering the electrical connection between the TGC source and the developing trigger electronics, the GFZ connector is used. The experimental results show that the improved TGC simulation signal source can uniformly output the random signal in every channel. The output noise is less than 3 mVrms.
文摘Tubular hydroforming has attracted increased attention in the vehicle industry recently. This paper covers a complete hydroforming process design for an instrum ent panel frame by finite element simulation using the explicit code LS-DYNA. The manufacturing process for the instrument panel frame consists of tube pre-be nding and final hydroforming. To accomplish hydroforming process design successf ully, a thorough investigation of proper combination of process parameters such as internal hydraulic pressure and axial feeding is carried out by finite element simulation to predict the tube wall thickness and shape. An optimized process parameter combination is obtained and verified by the instrument panel frame hyd roforming experiment. The experiment shows that designed process parameters can be used in real production through FEA simulation, but tubular thinned amplitu de by FEA is less than that with the experiment.
基金Supported by the National Natural Science Foundation of China (60672104,10675013)the Na-tional Basic Research Program of China ("973"Program)(2006CB705705)+1 种基金the 10th Five-Year Plan of the Ministry of Science and Technology of China(2001BA706B-05)the Joint Research Foundation of Beijing Municipal Commissionof Education~~
文摘A method for designing an X-ray flatness filter for medical electron linac is developed. It is used in the optimization process in the electron beam radiation system. Monte Carlo simulation method is used and two examples of real radiation system optimization processes for China-made medical electron linac are provided： 15 MV X- ray system of BJ-20 linac, and 12 MeV electron system of BJ-14. Results are verified by using the traditional method.
文摘The impedance of a solid state active phased array antenna varing with frequency and beam scanning scanning angle be matched with the solid state active matching network (SSAMN). In order to adjust and measure the radar conveniently and Securely, it is necessary for the impedance of the simulator of the phased array antennas to be optimized.Having selected the PIN dilde controlling circuits and the circuit parameters optimized,the simulator circuit is determined through numerical computation The experiment is given in support of the simulation.
基金supported by the National Natural Science Foundation of China(No.51805253)Research Start-up Fund Project of Introduced Talent(No.YKJ201969)Equipment Project of Ship Assembly and Construction for the Ministry of Industry and Information Technology(No.TC190H47J)。
文摘Engineering change management is a special form of problem solving where many rules must be followed to satisfy the requirements of product changes.As engineering change has great influence on the cycle and the cost of product development,it is necessary to anticipate design changes(DCs)in advance and estimate the influence effectively.A process simulation-based method for engineering change management is proposed incorporating multiple assessment parameters.First,the change propagation model is established,which includes the formulation of change propagation influence,assessment score of DC solution.Then the optimization process of DC solution is introduced based on ant colony optimization(ACO),and an optimization algorithm is detailed to acquire the optimal DC solution automatically.Finally,a case study of belt conveyor platform is implemented to validate the proposed method.The results show that changed requirement of product can be satisfied by multiple DC solutions and the optimal one can be acquired according to the unique characteristics of each solution.
文摘The characteristics of the design resources in the ship collaborative design is described and the hierarchical model for the evaluation of the design resources is established. The comprehensive evaluation of the co-designers for the collaborative design resources has been done from different aspects using Analytic Hierarchy Process （AHP） ,and according to the evaluation results,the candidates are determined. Meanwhile,based on the principle of minimum cost,and starting from the relations between the design tasks and the corresponding co-designers,the optimizing selection model of the collaborators is established and one novel genetic combined with simulated annealing algorithm is proposed to realize the optimization. It overcomes the defects of the genetic algorithm which may lead to the premature convergenee and local optimization if used individually. Through the application of this method in the ship collaborative design system,it proves the feasibility and provides a quantitative method for the optimizing selection of the design resources.
文摘A Verilog-VHDL translating method directed by simulation semantics is presented. Based on the analysis and comparison, three steps are taken to implement the translation. Through semantic analyzing and syntax tree reconstructing before translation, the main part of Verilog is supported. According to the level in the design hierarchy, the modules are translated in down-top order, and that results in a correct VHDL declaration-reference order. The translation rules of assignment statements and delay/timing constructs are also explained in detail. This method has been successfully implemented in the translator developed by the authors. The correctness has been validated by many examples.
基金Supported by the National Key Basic Research and Development Program(973 Program)(2014CB046405)
文摘In this paper a new spherical actuator is designed and its advantages are compared to an existing spherical actuator, which function is limited by several design bottlenecks. First the output torque is too small. Second, the attitude is difficult to be accurately detected. The new three-dimen- sional magnetic pole array can solve these major problems. The new actuator features an outer rotor with multiple permanent magnet （PM） poles. Using an analytical solution and the finite element so- lution simulation, the feasibility of the approach is verified. A prototype was developed, tested, and experiments were conducted to obtain the practical value of the magnetic flux density.
基金National Nature Science Foundation of China(No.60273044)Nature Science Foundation of Anhui Province(No.01042201)
文摘The whole superconducting HT-7U Tokamak is a high-cost and large-scale complicated device. The assembly requirement of HT-7U device is arduous and strict. At present, there have been no guiding principle for the assembly of the device, but assembly simulation can help the engineer plan and make decision by an intuitional and visual way before its actual assembly. The problem is that which scheme is most suitable should be solved primarily. From current research situation and technology progress of assembly simulation, this paper explained and analyzed four kinds of technological schemes of assembly simulation in common use. Finally, we got the most feasible scheme that was suitable for HT-7U assembly simulation by comparing their technological issues and difficult points of simulation among the four kinds of feasible schemes.
文摘A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented first. Hierarchical technique, control strategy based on multi-agent and simulation output analysis are depicted in detail then. In the end, an application example is taken out to prove that this system could be used to analyzing different hypothetical situation and configuring the auxiliary manufacturing system before production.
