In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented...In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented product FGPA-G 2-H on Aβ25-35-induced PC 12 cells were explored.The structure of GPA-G 2-H was determined by means of zeta potential analysis,FTIR,HPLC,XRD,GC-MS and NMR.The backbone of GPA-G 2-H was mainly composed of→4)-α-D-Glcp-(1→with branches substituted at O-3.Notably,GPA-G 2-H was degraded by intestinal microbiota in vitro with total sugar content and pH value decreasing,and short-chain fatty acids(SCFAs)increasing.Moreover,GPA-G 2-H significantly promoted the proliferation of Lactobacillus,Muribaculaceae and Weissella,thereby making positive alterations in intestinal microbiota composition.Additionally,FGPA-G 2-H activated the Nrf 2/HO-1 signaling pathway,enhanced HO-1,NQO 1,SOD and GSH-Px,while inhabited Keap 1,MDA and LDH,which alleviated Aβ-induced oxidative stress in PC 12 cells.These provide a solid theoretical basis for the further development of ginseng polysaccharides as functional food and antioxidant drugs.展开更多
2-substituted-1-amino-o-carboranes 2-R-1-NH_(2)-o-C_(2)B_(10)H_(10)(R=CH_(3),1a;R=Ph,1b)were synthesized and the reactions of these compounds with the yttrium dialkyl complex[Y(L)(CH_(2)SiMe3)_(2)](L=[2-(2,5-Me_(2)C_(...2-substituted-1-amino-o-carboranes 2-R-1-NH_(2)-o-C_(2)B_(10)H_(10)(R=CH_(3),1a;R=Ph,1b)were synthesized and the reactions of these compounds with the yttrium dialkyl complex[Y(L)(CH_(2)SiMe3)_(2)](L=[2-(2,5-Me_(2)C_(4)H_(2)N)C_(6)H4NC(Ph)=NDipp]-,Dipp=2,6-iPr_(2)C_(6)H_(3))were investigated.The 1H NMR spectroscopy indicate that the reaction of ytrrium dialkyl complex with one equivalent of 2-R-1-NH_(2)-o-C_(2)B_(10)H_(10) produce the mixture of ytrrium alkyl-amido complex[Y(L)(2-R-1-NH-o-C_(2)B_(10)H_(10))(CH_(2)SiMe3)](R=CH_(3),2a;R=Ph,2b)and bis(amido)complex[Y(L)(2-R-1-NH-o-C_(2)B_(10)H_(10))_(2)](R=CH_(3),3a;R=Ph,3b).The yttrium bridging imido complex[Y(L)(2-CH_(3)-1-N-o-C_(2)B_(10)H_(10))]_(2)(4a)was obtained by heating the mixture at 55℃for 12 h.Complex 3a was isolated and characterized by treating the yttrium dialkyl complex with two equivalents of 1a.The structures of complexes 3a and 4a were verified by single-crystal Xray diffraction.CCDC:2424136,3a;2424137,4a.展开更多
A trinuclear copper complex [Cu_(3)(L2)_(2)(SO_(4))_(2)(H_(2)O)_(7)]·8H_(2)O(1)(HL2=1-hydroxy-3-(pyrazin-2-yl)-N-(pyrazin-2-ylmethyl)imidazo[1,5-a]pyrazine-8-carboxamide) with a multi-substituted imidazo[1,5-a]py...A trinuclear copper complex [Cu_(3)(L2)_(2)(SO_(4))_(2)(H_(2)O)_(7)]·8H_(2)O(1)(HL2=1-hydroxy-3-(pyrazin-2-yl)-N-(pyrazin-2-ylmethyl)imidazo[1,5-a]pyrazine-8-carboxamide) with a multi-substituted imidazo[1,5-a]pyrazine scaffold was serendipitously prepared from the reaction of the pro-ligand of H_(2)L1(N,N'-bis(pyrazin-2-ylmethyl)pyrazine-2,3-dicarboxamide) with CuSO_(4)·5H_(2O) in aqueous solution at room temperature.Complex 1 was characterized by IR,single-crystal X-ray analysis,and magnetic susceptibility measurements.Single-crystal X-ray analysis reveals that the complex consists of three Cu(Ⅱ) ions,two in situ transformed L2~-ligands,two coordinated sulfates,seven coordinated water molecules,and eight uncoordinated water molecules.Magnetic susceptibility measurement indicates that there are obvious ferromagnetic coupling interactions between the adjacent Cu(Ⅱ) ions in 1.CCDC:1852713.展开更多
The xylitol dehydrogenase(XDH)is a crucial enzyme involved in the xylose utilization in pentose⁃catabolizing yeasts and fungi.In addition to producing xylulose,XDH can also be employed to develop a biosensor for monit...The xylitol dehydrogenase(XDH)is a crucial enzyme involved in the xylose utilization in pentose⁃catabolizing yeasts and fungi.In addition to producing xylulose,XDH can also be employed to develop a biosensor for monitoring xylitol concentration.In this study,the gene encoding the thermophilic fungus Talaromyces emersonii XDH(TeXDH)was heterologously expressed in Escherichia coli BL21(DE3)at 16℃in the soluble form.Recombinant TeXDH with high purity was purified by using a Ni⁃NTA affinity column.Size⁃exclusion chromatography and SDS⁃PAGE analysis demonstrated that the puri⁃fied recombinant TeXDH exists as a native trimer with a molecular mass of approximately 116 kD,and is composed of three identical subunits,each with a molecular weight of around 39 kD.The TeXDH strictly preferred NAD^(+)as a coenzyme to NADP^(+).The optimal temperature and pH of the TeXDH were 40℃and 10.0,respectively.After EDTA treatment,the enzyme activity of TeXDH decreased to 43.26%of the initial enzyme activity,while the divalent metal ions Mg^(2+)or Ca^(2+)could recover the enzyme activity of TeXDH,reaching 103.32%and 110.69%of the initial enzyme activity,respectively,making them the optimal divalent metal ion cofactors for TeXDH enzyme.However,the divalent metal ions of Mn^(2+),Ni^(2+),Cu^(2+),Zn^(2+),Co^(2+),and Cd^(2+)significantly inhibited the activity of TeXDH.ICP⁃MS and molecular doc⁃king studies revealed that 1 mol/L of TeXDH bound 2 mol/L Zn^(2+)ions and 1 mol/L Mg^(2+)ion.Further⁃more,TeXDH exhibited a high specificity for xylitol,laying the foundation for the development of future xylitol biosensors.展开更多
The precise characterization of interfacial structure for polymer-bonded explosive(PBX) modification is challenging due to the complexity of the interface. The inherent properties between explosive and binders affect ...The precise characterization of interfacial structure for polymer-bonded explosive(PBX) modification is challenging due to the complexity of the interface. The inherent properties between explosive and binders affect interface bonding, lowering the interfacial strength in unpredicted ways. Surface modification is an effective method to balance multi-utility in materials engineering, which has been carried out to design of high-performance composites with improved interfacial properties. Experimental methods may determine the coating shell for capturing the PBX structures. Various approaches were applied to characterize the structure and properties of PBX interface, including molecular dynamicsbased computational models to predict bonding properties. In this review, systematic organization were provided and summarized with detective methods on the surface and interface of explosives. Meanwhile, the usage scenarios and limitations of each measurement were proposed. Conclusions from the review yield useful guidelines and references for systematical characterization on the modification of explosive and can be extended to other materials.展开更多
Pickling sludge generated during the neutralization of pickling wastewater with calcium hydroxide in stainless steel pickling process was characterized using X-ray fluorescence spectrometry, X-ray diffractometry, scan...Pickling sludge generated during the neutralization of pickling wastewater with calcium hydroxide in stainless steel pickling process was characterized using X-ray fluorescence spectrometry, X-ray diffractometry, scanning electron microscopy, thermogravimetry and differential scanning calorimetry, etc. The major compositions of pickling sludge are CaF2, CaSO4, Me（OH）, （M： Fe, Cr, Ni）, and the content of CaF2 is high in the sludge. The melting point of pickling sludge is about 1350℃ and the viscosity is about 0.14 Pa.s at 1450 ℃, which are comparatively lower than those of normal refining slag. After heat treatment, the contents of sulfur and fluorine in the pickling sludge were reduced, confirming the thermal decomposition of sulfate in the sludge. Fluorine in the sludge is reduced by the gaseous SiF4 and A1F3 generated through the reactions of CaF2 with SiO2 and Al2O3. The preliminary results from the reduction test indicate that the sulfur content in the steel is not affected by the presence of sulfur in the sludge. The recovery of nickel is about 40%, and the chromium content changes marginally due to the protective atmosphere under the reduction condition of chromic oxide. The pickling sludge is a potential auxiliary material for the production of stainless steel.展开更多
Process mineralogy of low-grade laterite nickel ore in Indonesia was systematically characterized and the beneficiation process of mineral components such as limonite,serpentine and chromite was studied on the basis o...Process mineralogy of low-grade laterite nickel ore in Indonesia was systematically characterized and the beneficiation process of mineral components such as limonite,serpentine and chromite was studied on the basis of process mineralogy.The results show that the low-grade laterite nickel ore is a typical weathering sedimentary metamorphic oxidized ore,with the main valuable elements of Ni,Co and Cr and the main mineral components of limonite,serpentine,chromite,etc.There is no independent carrier mineral of Ni and Co in the raw ore,and the occurrence states of Ni and Co are relatively dispersed.For the limonite in laterite nickel mine,the nickel bearing magnetite concentrate with nickel grade of 1.98%and recovery rate of 88.42%can be obtained by reduction roasting magnetic separation process.For the serpentine in laterite nickel mine,the cobalt bearing concentrate with Co grade of 0.17%and recovery rate of 23.17%can be obtained by positive and reverse flotation process.A chromium concentrate containing 35.17%Cr_(2)O_(3) and a recovery of 33.42%can be obtained by using the combined process of coarse and fine classification and gravity and magnetic.展开更多
Solid acid catalysts have been widely used in advanced petrochemical processes because of their environmental friendliness,high product selectivity,and easy product separation.Solid-state nuclear magnetic resonance(NM...Solid acid catalysts have been widely used in advanced petrochemical processes because of their environmental friendliness,high product selectivity,and easy product separation.Solid-state nuclear magnetic resonance(NMIR)spectroscopy is a well-established tool for structure determination and dynamic study of various functional materials.In this review,we focus mainly on our research using solid-state NMR to characterize the acid properties and elucidate the catalytic reaction mechanism of solid acid catalysts.The acid strength of solid acids can be quantitatively measured from the chemical shifts of adsorbed probe molecules such as pyridine,acetone,trialkylphosphine oxides,and trimethylphosphine.The spatial proximity and synergetic effect of various acid sites on solid acid catalysts can be ascertained by two-dimensional(2D)double-quantum magic angle spinning(DQ MAS)NMR spectroscopy.Additionally,in situ solid-state NMR spectroscopy can be used to explore heterogeneous catalytic reaction mechanisms by monitoring the evolution of the reactants,intermediates,and products.展开更多
The sodium expansion curves of semi-graphitic cathode measured with the improved Rapoport-Samoilenko apparatus. The and TiB2/C composite cathode with different TiB2 contents were mathematic model of the sodium expansi...The sodium expansion curves of semi-graphitic cathode measured with the improved Rapoport-Samoilenko apparatus. The and TiB2/C composite cathode with different TiB2 contents were mathematic model of the sodium expansion was deduced on the basis of the experimental results. The sodium expansion parameter （a） and penetration rate factor （Q）, were introduced into the model The model was validated with the experimental sodium expansion curves self-measured and reported. The results show that the variation tendency of the sodium expansion parameter （a） and penetration rate factor （Q） is consistent with that of the experimental curves. The model is capable of not only conveniently judging the cathode quality, but also favorably establishing a unified standard of the resistance to sodium penetration of cathode.展开更多
Geotechnical properties of red shale encountered in deep underground mining were characterized on both laboratory and field scale to reveal its unfavorably in geoenvironment.Its constituents,microstructure,strength pr...Geotechnical properties of red shale encountered in deep underground mining were characterized on both laboratory and field scale to reveal its unfavorably in geoenvironment.Its constituents,microstructure,strength properties and water-weakening properties were investigated.In situ stress environment and mining-induced fractured damage zone after excavation were studied to reveal the instability mechanism.The results show that red shale contains swelling and loose clayey minerals as interstitial filling material,producing low shear strength of microstructure and making it vulnerable to water.Macroscopically,a U-shaped curve of uniaxial compressive strength(UCS)exists with the increase of the angle between macro weakness plane and the horizon.However,its tensile strength reduced monotonically with this angle.While immersed in water for72h,its UCS reduced by91.9%comparing to the natural state.Field sonic tests reveal that an asymmetrical geometrical profile of fractured damage zone of gateroad was identified due to geological bedding plane and detailed gateroad layout with regards to the direction of major principle stress.Therefore,red shale is a kind of engineering soft rock.For ground control in underground mining or similar applications,water inflow within several hours of excavation must strictly be prevented and energy adsorbing rock bolt is recommended,especially in large deformation part of gateroad.展开更多
Gold has been present throughout the history of mankind and used to make jewelry and coins, and recently, acquired several industrial uses. The price of gold in international market had a significant increasing, surpa...Gold has been present throughout the history of mankind and used to make jewelry and coins, and recently, acquired several industrial uses. The price of gold in international market had a significant increasing, surpassing 100% in the last five years. Thereby, deposits with low levels of gold content, gold with complex associations or in a very fine particle size became exploitable again, allowing new projects and expansion of existing ones. However, for maximum process efficiency is indispensable a deep knowledge of the characteristics of these minerals and their behavior in face of beneficiation processes. Consequently, an accurate routine for mineralogical and technological characterization is essential.展开更多
A new multifunctional mPEG-b-PAA-grafted chitosan copolymer possessing amino and carboxyl groups,mPEG-b-PAA-g-CHI(compound 6) ,was designed for a potential application in gene/drug delivery and synthesized by the meth...A new multifunctional mPEG-b-PAA-grafted chitosan copolymer possessing amino and carboxyl groups,mPEG-b-PAA-g-CHI(compound 6) ,was designed for a potential application in gene/drug delivery and synthesized by the methods of reversible addition-fragmentation chain transfer(RAFT) polymerization of acrylic acid(AA) and grafting reaction of a biodegradable chitosan(CHI) derivative.Completion of the reactions and characterization of the resulting compounds were demonstrated by 1 H NMR,FTIR and gel permeation chtomatography(GPC) studies.The results show that the molar ratio of amino groups to carboxyl groups in the copolymer(compound 6) is 0.41-0.59.展开更多
【Aim】The objective of this study is to characterize eight digestive carboxypeptidase genes in Anopheles sinensis,and to analyze their expression patterns before and post blood meal feeding.【Methods】The characteris...【Aim】The objective of this study is to characterize eight digestive carboxypeptidase genes in Anopheles sinensis,and to analyze their expression patterns before and post blood meal feeding.【Methods】The characteristics of eight digestive carboxypeptidase genes of An.sinensis were analyzed using bioinformatics methods,and their expression levels in different tissues at different developmental stages and in the midguts of female adults at different time points post blood meal feeding(PBM)were compared by semi-quantitative reverse transcription PCR and quantitative realtime PCR(qRT-PCR),respectively.【Results】Bioinformatics analysis indicated that of the eight carboxypeptidase genes,six genes encode carboxypeptidases A(AsCPA-I-AsCPA-VI)and two encode carboxypeptidases B(AsCPB-I and AsCPB-II).The expression of AsCPA-V was only detected in midguts and carcasses(whole mosquitoes minus midgut)of the 4th instar larvae,suggesting that it might have specific expression in larvae,while the other seven genes were simultaneously expressed in the 4th instar larvae and adults.After blood meal feeding,the expression levels of AsCPA-I,AsCPA-II,AsCPA-III,AsCPA-IV,AsCPA-VI,AsCPB-I and AsCPB-II in the midguts of female adults significantly changed,but their expression patterns were completely different,suggesting that the blood protein digestion is a complex process involving the coordinative expressions of multiple genes.The expression levels of AsCPA-I,AsCPA-III,AsCPA-IV,AsCPA-VI and AsCPB-II were all up-regulated and peaked at 24 h PBM.Especially,the expression level of AsCPA-VI rapidly increased at 3 h PBM,and peaked at 24 h PBM with^418fold induction,and that of AsCPB-II also increased by more than 40-fold at 24 h PBM,suggesting that they might be involved in blood protein digestion.However,the expression levels of AsCPA-II and AsCPB-I in midguts of female adults were significantly down-regulated after blood meal feeding.【Conclusion】Eight carboxypeptidase genes from An.sinensis were characterized.Among them,AsCPA-I,AsCPA-III,AsCPA-IV,AsCPA-VI and AsCPB-II are putatively involved in blood protein digestion;in particular,AsCPA-VI and AsCPB-II might play more important roles.Our results provide a basis for further study on the molecular mechanism of blood protein digestion in mosquitos as well as in An.sinensis.展开更多
In this study,AleCuO nanocomposites were fabricated by sol-gel method.As a contrast,the thermite was prepared by physical mixing at the equivalence ratio of 0.5,1,2,respectively.The intermediates and samples as prepar...In this study,AleCuO nanocomposites were fabricated by sol-gel method.As a contrast,the thermite was prepared by physical mixing at the equivalence ratio of 0.5,1,2,respectively.The intermediates and samples as prepared were characterized by SEM and XRD.The exothermic properties of the two samples prepared at different equivalence ratios were tested and the reaction products were characterized by XRD.The SEM results show that the sample prepared by the sol-gel method demonstrates a micron-sized agglomerated sphere formed by a mutual wrapping of Al NPs and CuO NPs,and the particles are evenly distributed in the agglomerate.In addition,when the content of Al powder is seriously insufficient,the heat release of the sample prepared by physical mixing is 1.6 times that of by sol-gel method.With the increase of Al powder content,the exothermic properties of Al/CuO NPs prepared by sol-gel method began to increase significantly compared with physical mixing and the difference is 1.5 times when the equivalence ratio increases to 2.It can be concluded that the reason for this result may be attributed to the different mass transfer modes of components due to the different morphologies of samples.展开更多
Anatase TiO_(2)nanospindles containing 89%exposed{101}facets(TIO_(2)-101)and nanosheets with 77%exposed{001}facets(TiO_(2)-001)were hydrothermally synthesized and used as supports for Pd catalysts.The effects of the T...Anatase TiO_(2)nanospindles containing 89%exposed{101}facets(TIO_(2)-101)and nanosheets with 77%exposed{001}facets(TiO_(2)-001)were hydrothermally synthesized and used as supports for Pd catalysts.The effects of the TiO_(2)materials on the catalytic performance of Pd/TiO_(2)-101 and Pd/TiO_(2)-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene.The PdfTiO_(2)-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield.To understand these effects,the catalysts were characterized by H_(2)temperature-programmed desorption(H_(2)-TPD),H_(2)temperature-programmed reduction(H=-TPR),transmission electron microscopy(TEM),pulse CO chemisorption,X-ray photoelectron spectroscopy(XPS),and thermogravimetric analysis(TGA).The TEM and CO chemisorption results confirmed that Pd nanoparticles(NPs)on the TiO_(2)-101 support had a smaller average particle size(1.53 nm)and a higher dispersion(15.95%)than those on the TiO_(2)-001 support(average particle size of 4.36 nm and dispersion of 9.06%).The smaller particle size and higher dispersion of Pd on the Pd/TiO_(2)-101 catalyst provided more reaction active sites,which contributed to the improved catalytic activity of this supported catalyst.展开更多
In order to efficiently explore and use woody biomass,six lignin fractions were isolated from dewaxed Caragana sinica via successive extraction with organic solvents and alkaline solutions.The lignin structures were c...In order to efficiently explore and use woody biomass,six lignin fractions were isolated from dewaxed Caragana sinica via successive extraction with organic solvents and alkaline solutions.The lignin structures were characterized by Fourier transform infrared spectroscopy(FT-IR) and 1D and 2D Nuclear Magnetic Resonance(NMR).FT-IR spectra revealed that the "core" of the lignin structure did not significantly change during the treatment under the conditions given.The results of 1H and 13C NMR demonstrated that the lignin fraction L2,isolated with 70% ethanol containing 1% NaOH,was mainly composed of β-O-4 ether bonds together with G and S units and trace p-hydroxyphenyl unit.Based on the 2D HSQC NMR spectrum,the ethanol organosolv lignin fraction L1,extracted with 70% ethanol,presents a predominance of β-O-4′ aryl ether linkages(61% of total side chains),and a low abundance of condensed carbon-carbon linked structures(such as ββ′,β-1′,and β-5′) and a lower S/G ratio.Furthermore,a small percentage(ca.9%) of the linkage side chain was found to be acylated at the γ-carbon.展开更多
The unsaturated quaternary ammonium salt diethyldiallylammonium chloride(DEDAAC) was synthesized in a two-step synthetic method. The influences of the adding method of raw materials and temperature on the yields of di...The unsaturated quaternary ammonium salt diethyldiallylammonium chloride(DEDAAC) was synthesized in a two-step synthetic method. The influences of the adding method of raw materials and temperature on the yields of diethylallylamine (DEAA), and drying and temperature on the synthesis of DEDAAC were investigated. The content of in-process product DEAA was determined by non-aqueous titration. The structure of product DEDAAC was identified with IR, 1 H NMR and elemental analysis. The results show that adding allyl chloride and sodium hydroxide alternately can increase the yield of DEAA and decrease by-products. In further synthesizing of DEDAAC from DEAA, the step of drying DEAA is very necessary. When DEAA is dried by solid sodium hydroxide, good columnar crystals with a high purity(mp 199.5-201.0 ℃) are obtained; when DEAA is undried or the content of water in DEAA is above 20%, only platelets with bad quality are obtained even without crystals. The suitable synthesis conditions for DEAA and DEDAAC are 35 ℃, 6 h and 40 ℃, 36 h, respectively, and their yields are 69.7% and 67.3%, respectively.展开更多
Previous study indicated that the thermo-sensitive genic malesterile(TGMS)gene in rice was regulated by temperature.TGMS rice plays an important role in hybrid rice production,because the application of the TGMS syste...Previous study indicated that the thermo-sensitive genic malesterile(TGMS)gene in rice was regulated by temperature.TGMS rice plays an important role in hybrid rice production,because the application of the TGMS system in two-line breeding is laborsaving,timesaving,simple,inexpensive,efficient,and eliminating the limitations of the cytoplasmic male sterility(CMS)system.'AnnongS'is the first discovered and deeply studied TGMS rice lines in China.'AnnongS-1'and'Y58S',two derivatives of TGMS line AnnongS,were both controlled by a single recessive gene named tms5,which was genetically mapped on chromosome 2.In this study,three populations('AnnongS-1'×'Nanjing11','Y58S'×'Q611',and'Y58S'×'Guanghui122')were developed and used for the molecular fine mapping of the tms5 gene.By analyzing recombination events in the sterile individuals using a total of 125 probes covering the tms5 region,the tms5 gene was physically mapped to a 19-kb DNA fragment between two markers 4039-1 and 4039-2,which were located on the BAC clone AP004039.After the construction of the physical map between two markers 4039-1 and 4039-2,a member(ONAC023)of the NAC(NAM-ATAF-CUC-related)gene family was identified as the candidate gene of the tms5 gene.展开更多
The effects of adding cosolvents of diglyme and 15-crown-5 to the reaction mixture of Wurtz-type coupling of dichlorosilanes on the yield and relative molecular mass dispersity of polymethylphenethylsilane(PMPES) were...The effects of adding cosolvents of diglyme and 15-crown-5 to the reaction mixture of Wurtz-type coupling of dichlorosilanes on the yield and relative molecular mass dispersity of polymethylphenethylsilane(PMPES) were discussed. The results show that addition of 10%(volume ratio of diglyme to toluene) diglyme as a cosolvent to the reaction mixture leads to the yield increase of PMPES with a monomodal distribution of relative molecular masses. Adding 10%diglyme to the reaction mixtures, the yields of polymethylcyclohexylsilane(PMCS) and copolymers (polymethylphenethylsilane-co-methylcyclohexylsilane), (the molar ratios of methylphenethyldichlorosilane to methylcyclohexyldichlorosilane were 2.0, 1.0 and 0.5, and the copolymers were abbreviated by Copolymers I, II, III, respectively) are 47%, 52%, 54%, 53%, respectively. Their relative molecular masses ([`(M)]w )(\bar M_w ) almost reach 105. These polysilanes were characterized by 1H-NMR, IR and UV absorption spectrum.展开更多
Cotton disea ses represent a major challenge to cotton growth.Cloning of a cotton pathogen re-sponse gene and promoter is of great importance to improve disease resistance.In this study,a full length CC-NBS-LRRgene(GH...Cotton disea ses represent a major challenge to cotton growth.Cloning of a cotton pathogen re-sponse gene and promoter is of great importance to improve disease resistance.In this study,a full length CC-NBS-LRRgene(GHNBS)and its 5L flanking sequence have been cloned by race and tail PCR and further studied.The entire coding region is 2583 bp and enco des a polypeptide of 861 a mino acids with 28%maximum homology to an R gene of Arabi dopsis depo sited in the GenBank.Semi quantitativeRT-PCR showed thatGHNBS was expressed in floral buds,petals,phloem,root s,and leaves,and it has a greater exp ression pattern in roots and leaves.展开更多
基金Supported by the National Key Research and Development Program of Traditional Chinese Medicine Modernization Project,China(No.2023YFC3504000)the Science and Technology Development Project of Jilin Province,China(No.20240404043ZP)the Science and Technology Innovation Cooperation Project of Changchun Science and Technology Bureau and Chinese Academy of Sciences,China(No.23SH14)。
文摘In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented product FGPA-G 2-H on Aβ25-35-induced PC 12 cells were explored.The structure of GPA-G 2-H was determined by means of zeta potential analysis,FTIR,HPLC,XRD,GC-MS and NMR.The backbone of GPA-G 2-H was mainly composed of→4)-α-D-Glcp-(1→with branches substituted at O-3.Notably,GPA-G 2-H was degraded by intestinal microbiota in vitro with total sugar content and pH value decreasing,and short-chain fatty acids(SCFAs)increasing.Moreover,GPA-G 2-H significantly promoted the proliferation of Lactobacillus,Muribaculaceae and Weissella,thereby making positive alterations in intestinal microbiota composition.Additionally,FGPA-G 2-H activated the Nrf 2/HO-1 signaling pathway,enhanced HO-1,NQO 1,SOD and GSH-Px,while inhabited Keap 1,MDA and LDH,which alleviated Aβ-induced oxidative stress in PC 12 cells.These provide a solid theoretical basis for the further development of ginseng polysaccharides as functional food and antioxidant drugs.
文摘2-substituted-1-amino-o-carboranes 2-R-1-NH_(2)-o-C_(2)B_(10)H_(10)(R=CH_(3),1a;R=Ph,1b)were synthesized and the reactions of these compounds with the yttrium dialkyl complex[Y(L)(CH_(2)SiMe3)_(2)](L=[2-(2,5-Me_(2)C_(4)H_(2)N)C_(6)H4NC(Ph)=NDipp]-,Dipp=2,6-iPr_(2)C_(6)H_(3))were investigated.The 1H NMR spectroscopy indicate that the reaction of ytrrium dialkyl complex with one equivalent of 2-R-1-NH_(2)-o-C_(2)B_(10)H_(10) produce the mixture of ytrrium alkyl-amido complex[Y(L)(2-R-1-NH-o-C_(2)B_(10)H_(10))(CH_(2)SiMe3)](R=CH_(3),2a;R=Ph,2b)and bis(amido)complex[Y(L)(2-R-1-NH-o-C_(2)B_(10)H_(10))_(2)](R=CH_(3),3a;R=Ph,3b).The yttrium bridging imido complex[Y(L)(2-CH_(3)-1-N-o-C_(2)B_(10)H_(10))]_(2)(4a)was obtained by heating the mixture at 55℃for 12 h.Complex 3a was isolated and characterized by treating the yttrium dialkyl complex with two equivalents of 1a.The structures of complexes 3a and 4a were verified by single-crystal Xray diffraction.CCDC:2424136,3a;2424137,4a.
文摘A trinuclear copper complex [Cu_(3)(L2)_(2)(SO_(4))_(2)(H_(2)O)_(7)]·8H_(2)O(1)(HL2=1-hydroxy-3-(pyrazin-2-yl)-N-(pyrazin-2-ylmethyl)imidazo[1,5-a]pyrazine-8-carboxamide) with a multi-substituted imidazo[1,5-a]pyrazine scaffold was serendipitously prepared from the reaction of the pro-ligand of H_(2)L1(N,N'-bis(pyrazin-2-ylmethyl)pyrazine-2,3-dicarboxamide) with CuSO_(4)·5H_(2O) in aqueous solution at room temperature.Complex 1 was characterized by IR,single-crystal X-ray analysis,and magnetic susceptibility measurements.Single-crystal X-ray analysis reveals that the complex consists of three Cu(Ⅱ) ions,two in situ transformed L2~-ligands,two coordinated sulfates,seven coordinated water molecules,and eight uncoordinated water molecules.Magnetic susceptibility measurement indicates that there are obvious ferromagnetic coupling interactions between the adjacent Cu(Ⅱ) ions in 1.CCDC:1852713.
基金湖南省教育厅基金优秀青年项目(No.22B0482)湖南科技大学博士启动基金(No.E51992 and E51993)资助。
文摘The xylitol dehydrogenase(XDH)is a crucial enzyme involved in the xylose utilization in pentose⁃catabolizing yeasts and fungi.In addition to producing xylulose,XDH can also be employed to develop a biosensor for monitoring xylitol concentration.In this study,the gene encoding the thermophilic fungus Talaromyces emersonii XDH(TeXDH)was heterologously expressed in Escherichia coli BL21(DE3)at 16℃in the soluble form.Recombinant TeXDH with high purity was purified by using a Ni⁃NTA affinity column.Size⁃exclusion chromatography and SDS⁃PAGE analysis demonstrated that the puri⁃fied recombinant TeXDH exists as a native trimer with a molecular mass of approximately 116 kD,and is composed of three identical subunits,each with a molecular weight of around 39 kD.The TeXDH strictly preferred NAD^(+)as a coenzyme to NADP^(+).The optimal temperature and pH of the TeXDH were 40℃and 10.0,respectively.After EDTA treatment,the enzyme activity of TeXDH decreased to 43.26%of the initial enzyme activity,while the divalent metal ions Mg^(2+)or Ca^(2+)could recover the enzyme activity of TeXDH,reaching 103.32%and 110.69%of the initial enzyme activity,respectively,making them the optimal divalent metal ion cofactors for TeXDH enzyme.However,the divalent metal ions of Mn^(2+),Ni^(2+),Cu^(2+),Zn^(2+),Co^(2+),and Cd^(2+)significantly inhibited the activity of TeXDH.ICP⁃MS and molecular doc⁃king studies revealed that 1 mol/L of TeXDH bound 2 mol/L Zn^(2+)ions and 1 mol/L Mg^(2+)ion.Further⁃more,TeXDH exhibited a high specificity for xylitol,laying the foundation for the development of future xylitol biosensors.
基金financial support from the National Natural Science Foundation of China (Grant Nos.U2130207,22275173)presidential foundation of China Academy of Engineering Physics (Grant No.YZJJZQ2023008)。
文摘The precise characterization of interfacial structure for polymer-bonded explosive(PBX) modification is challenging due to the complexity of the interface. The inherent properties between explosive and binders affect interface bonding, lowering the interfacial strength in unpredicted ways. Surface modification is an effective method to balance multi-utility in materials engineering, which has been carried out to design of high-performance composites with improved interfacial properties. Experimental methods may determine the coating shell for capturing the PBX structures. Various approaches were applied to characterize the structure and properties of PBX interface, including molecular dynamicsbased computational models to predict bonding properties. In this review, systematic organization were provided and summarized with detective methods on the surface and interface of explosives. Meanwhile, the usage scenarios and limitations of each measurement were proposed. Conclusions from the review yield useful guidelines and references for systematical characterization on the modification of explosive and can be extended to other materials.
基金Project(2010JM7010)supported by the Natural Science Foundation of Shaanxi Province,ChinaProject supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education,ChinaProject supported by the Technology Foundation for Selected Overseas Chinese Scholars,Department of Human Resources and Social Security of Shaanxi Province,China
文摘Pickling sludge generated during the neutralization of pickling wastewater with calcium hydroxide in stainless steel pickling process was characterized using X-ray fluorescence spectrometry, X-ray diffractometry, scanning electron microscopy, thermogravimetry and differential scanning calorimetry, etc. The major compositions of pickling sludge are CaF2, CaSO4, Me（OH）, （M： Fe, Cr, Ni）, and the content of CaF2 is high in the sludge. The melting point of pickling sludge is about 1350℃ and the viscosity is about 0.14 Pa.s at 1450 ℃, which are comparatively lower than those of normal refining slag. After heat treatment, the contents of sulfur and fluorine in the pickling sludge were reduced, confirming the thermal decomposition of sulfate in the sludge. Fluorine in the sludge is reduced by the gaseous SiF4 and A1F3 generated through the reactions of CaF2 with SiO2 and Al2O3. The preliminary results from the reduction test indicate that the sulfur content in the steel is not affected by the presence of sulfur in the sludge. The recovery of nickel is about 40%, and the chromium content changes marginally due to the protective atmosphere under the reduction condition of chromic oxide. The pickling sludge is a potential auxiliary material for the production of stainless steel.
基金Project(2019M653082)supported by the China Postdoctoral Science FoundationProject(BGRIMM-KJSKL-2020-02)supported by the Found of State Key Laboratory of Mineral Processing,China。
文摘Process mineralogy of low-grade laterite nickel ore in Indonesia was systematically characterized and the beneficiation process of mineral components such as limonite,serpentine and chromite was studied on the basis of process mineralogy.The results show that the low-grade laterite nickel ore is a typical weathering sedimentary metamorphic oxidized ore,with the main valuable elements of Ni,Co and Cr and the main mineral components of limonite,serpentine,chromite,etc.There is no independent carrier mineral of Ni and Co in the raw ore,and the occurrence states of Ni and Co are relatively dispersed.For the limonite in laterite nickel mine,the nickel bearing magnetite concentrate with nickel grade of 1.98%and recovery rate of 88.42%can be obtained by reduction roasting magnetic separation process.For the serpentine in laterite nickel mine,the cobalt bearing concentrate with Co grade of 0.17%and recovery rate of 23.17%can be obtained by positive and reverse flotation process.A chromium concentrate containing 35.17%Cr_(2)O_(3) and a recovery of 33.42%can be obtained by using the combined process of coarse and fine classification and gravity and magnetic.
文摘Solid acid catalysts have been widely used in advanced petrochemical processes because of their environmental friendliness,high product selectivity,and easy product separation.Solid-state nuclear magnetic resonance(NMIR)spectroscopy is a well-established tool for structure determination and dynamic study of various functional materials.In this review,we focus mainly on our research using solid-state NMR to characterize the acid properties and elucidate the catalytic reaction mechanism of solid acid catalysts.The acid strength of solid acids can be quantitatively measured from the chemical shifts of adsorbed probe molecules such as pyridine,acetone,trialkylphosphine oxides,and trimethylphosphine.The spatial proximity and synergetic effect of various acid sites on solid acid catalysts can be ascertained by two-dimensional(2D)double-quantum magic angle spinning(DQ MAS)NMR spectroscopy.Additionally,in situ solid-state NMR spectroscopy can be used to explore heterogeneous catalytic reaction mechanisms by monitoring the evolution of the reactants,intermediates,and products.
基金Project(2005CB623703) supported by the Major State Basic Research and Development Program of ChinaProject(2008AA030502) supported by the National High-Tech Research and Development Program of ChinaProject(GUIKEJI0639032) supported by the Science Fund Project of Guangxi Province, China
文摘The sodium expansion curves of semi-graphitic cathode measured with the improved Rapoport-Samoilenko apparatus. The and TiB2/C composite cathode with different TiB2 contents were mathematic model of the sodium expansion was deduced on the basis of the experimental results. The sodium expansion parameter （a） and penetration rate factor （Q）, were introduced into the model The model was validated with the experimental sodium expansion curves self-measured and reported. The results show that the variation tendency of the sodium expansion parameter （a） and penetration rate factor （Q） is consistent with that of the experimental curves. The model is capable of not only conveniently judging the cathode quality, but also favorably establishing a unified standard of the resistance to sodium penetration of cathode.
基金Projects(51774058,51674047)supported by the National Natural Science Foundation of ChinaProjects(cstc2016jcyjA1861,cstc2018jcyjA3320)supported by Chongqing Basic Science and Cutting-edge Technology Special Projects,ChinaProject(2015M570607)supported by Postdoctoral Science Foundation of China
文摘Geotechnical properties of red shale encountered in deep underground mining were characterized on both laboratory and field scale to reveal its unfavorably in geoenvironment.Its constituents,microstructure,strength properties and water-weakening properties were investigated.In situ stress environment and mining-induced fractured damage zone after excavation were studied to reveal the instability mechanism.The results show that red shale contains swelling and loose clayey minerals as interstitial filling material,producing low shear strength of microstructure and making it vulnerable to water.Macroscopically,a U-shaped curve of uniaxial compressive strength(UCS)exists with the increase of the angle between macro weakness plane and the horizon.However,its tensile strength reduced monotonically with this angle.While immersed in water for72h,its UCS reduced by91.9%comparing to the natural state.Field sonic tests reveal that an asymmetrical geometrical profile of fractured damage zone of gateroad was identified due to geological bedding plane and detailed gateroad layout with regards to the direction of major principle stress.Therefore,red shale is a kind of engineering soft rock.For ground control in underground mining or similar applications,water inflow within several hours of excavation must strictly be prevented and energy adsorbing rock bolt is recommended,especially in large deformation part of gateroad.
文摘Gold has been present throughout the history of mankind and used to make jewelry and coins, and recently, acquired several industrial uses. The price of gold in international market had a significant increasing, surpassing 100% in the last five years. Thereby, deposits with low levels of gold content, gold with complex associations or in a very fine particle size became exploitable again, allowing new projects and expansion of existing ones. However, for maximum process efficiency is indispensable a deep knowledge of the characteristics of these minerals and their behavior in face of beneficiation processes. Consequently, an accurate routine for mineralogical and technological characterization is essential.
基金Project(20704011) supported by the National Natural Science Foundation of ChinaProject(09JJ3027) supported by the Natural Science Foundation of Hunan Province,ChinaProject(50725825) supported by the National Science Foundation for Distinguished Young Scholars
文摘A new multifunctional mPEG-b-PAA-grafted chitosan copolymer possessing amino and carboxyl groups,mPEG-b-PAA-g-CHI(compound 6) ,was designed for a potential application in gene/drug delivery and synthesized by the methods of reversible addition-fragmentation chain transfer(RAFT) polymerization of acrylic acid(AA) and grafting reaction of a biodegradable chitosan(CHI) derivative.Completion of the reactions and characterization of the resulting compounds were demonstrated by 1 H NMR,FTIR and gel permeation chtomatography(GPC) studies.The results show that the molar ratio of amino groups to carboxyl groups in the copolymer(compound 6) is 0.41-0.59.
文摘【Aim】The objective of this study is to characterize eight digestive carboxypeptidase genes in Anopheles sinensis,and to analyze their expression patterns before and post blood meal feeding.【Methods】The characteristics of eight digestive carboxypeptidase genes of An.sinensis were analyzed using bioinformatics methods,and their expression levels in different tissues at different developmental stages and in the midguts of female adults at different time points post blood meal feeding(PBM)were compared by semi-quantitative reverse transcription PCR and quantitative realtime PCR(qRT-PCR),respectively.【Results】Bioinformatics analysis indicated that of the eight carboxypeptidase genes,six genes encode carboxypeptidases A(AsCPA-I-AsCPA-VI)and two encode carboxypeptidases B(AsCPB-I and AsCPB-II).The expression of AsCPA-V was only detected in midguts and carcasses(whole mosquitoes minus midgut)of the 4th instar larvae,suggesting that it might have specific expression in larvae,while the other seven genes were simultaneously expressed in the 4th instar larvae and adults.After blood meal feeding,the expression levels of AsCPA-I,AsCPA-II,AsCPA-III,AsCPA-IV,AsCPA-VI,AsCPB-I and AsCPB-II in the midguts of female adults significantly changed,but their expression patterns were completely different,suggesting that the blood protein digestion is a complex process involving the coordinative expressions of multiple genes.The expression levels of AsCPA-I,AsCPA-III,AsCPA-IV,AsCPA-VI and AsCPB-II were all up-regulated and peaked at 24 h PBM.Especially,the expression level of AsCPA-VI rapidly increased at 3 h PBM,and peaked at 24 h PBM with^418fold induction,and that of AsCPB-II also increased by more than 40-fold at 24 h PBM,suggesting that they might be involved in blood protein digestion.However,the expression levels of AsCPA-II and AsCPB-I in midguts of female adults were significantly down-regulated after blood meal feeding.【Conclusion】Eight carboxypeptidase genes from An.sinensis were characterized.Among them,AsCPA-I,AsCPA-III,AsCPA-IV,AsCPA-VI and AsCPB-II are putatively involved in blood protein digestion;in particular,AsCPA-VI and AsCPB-II might play more important roles.Our results provide a basis for further study on the molecular mechanism of blood protein digestion in mosquitos as well as in An.sinensis.
文摘In this study,AleCuO nanocomposites were fabricated by sol-gel method.As a contrast,the thermite was prepared by physical mixing at the equivalence ratio of 0.5,1,2,respectively.The intermediates and samples as prepared were characterized by SEM and XRD.The exothermic properties of the two samples prepared at different equivalence ratios were tested and the reaction products were characterized by XRD.The SEM results show that the sample prepared by the sol-gel method demonstrates a micron-sized agglomerated sphere formed by a mutual wrapping of Al NPs and CuO NPs,and the particles are evenly distributed in the agglomerate.In addition,when the content of Al powder is seriously insufficient,the heat release of the sample prepared by physical mixing is 1.6 times that of by sol-gel method.With the increase of Al powder content,the exothermic properties of Al/CuO NPs prepared by sol-gel method began to increase significantly compared with physical mixing and the difference is 1.5 times when the equivalence ratio increases to 2.It can be concluded that the reason for this result may be attributed to the different mass transfer modes of components due to the different morphologies of samples.
文摘Anatase TiO_(2)nanospindles containing 89%exposed{101}facets(TIO_(2)-101)and nanosheets with 77%exposed{001}facets(TiO_(2)-001)were hydrothermally synthesized and used as supports for Pd catalysts.The effects of the TiO_(2)materials on the catalytic performance of Pd/TiO_(2)-101 and Pd/TiO_(2)-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene.The PdfTiO_(2)-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield.To understand these effects,the catalysts were characterized by H_(2)temperature-programmed desorption(H_(2)-TPD),H_(2)temperature-programmed reduction(H=-TPR),transmission electron microscopy(TEM),pulse CO chemisorption,X-ray photoelectron spectroscopy(XPS),and thermogravimetric analysis(TGA).The TEM and CO chemisorption results confirmed that Pd nanoparticles(NPs)on the TiO_(2)-101 support had a smaller average particle size(1.53 nm)and a higher dispersion(15.95%)than those on the TiO_(2)-001 support(average particle size of 4.36 nm and dispersion of 9.06%).The smaller particle size and higher dispersion of Pd on the Pd/TiO_(2)-101 catalyst provided more reaction active sites,which contributed to the improved catalytic activity of this supported catalyst.
基金Major State Basic Research Projects of China(973-2010CB732204)Specific Programs in Graduate Science and Technology Innovation of Beijing Forestry University(BLYJ201110)
文摘In order to efficiently explore and use woody biomass,six lignin fractions were isolated from dewaxed Caragana sinica via successive extraction with organic solvents and alkaline solutions.The lignin structures were characterized by Fourier transform infrared spectroscopy(FT-IR) and 1D and 2D Nuclear Magnetic Resonance(NMR).FT-IR spectra revealed that the "core" of the lignin structure did not significantly change during the treatment under the conditions given.The results of 1H and 13C NMR demonstrated that the lignin fraction L2,isolated with 70% ethanol containing 1% NaOH,was mainly composed of β-O-4 ether bonds together with G and S units and trace p-hydroxyphenyl unit.Based on the 2D HSQC NMR spectrum,the ethanol organosolv lignin fraction L1,extracted with 70% ethanol,presents a predominance of β-O-4′ aryl ether linkages(61% of total side chains),and a low abundance of condensed carbon-carbon linked structures(such as ββ′,β-1′,and β-5′) and a lower S/G ratio.Furthermore,a small percentage(ca.9%) of the linkage side chain was found to be acylated at the γ-carbon.
文摘The unsaturated quaternary ammonium salt diethyldiallylammonium chloride(DEDAAC) was synthesized in a two-step synthetic method. The influences of the adding method of raw materials and temperature on the yields of diethylallylamine (DEAA), and drying and temperature on the synthesis of DEDAAC were investigated. The content of in-process product DEAA was determined by non-aqueous titration. The structure of product DEDAAC was identified with IR, 1 H NMR and elemental analysis. The results show that adding allyl chloride and sodium hydroxide alternately can increase the yield of DEAA and decrease by-products. In further synthesizing of DEDAAC from DEAA, the step of drying DEAA is very necessary. When DEAA is dried by solid sodium hydroxide, good columnar crystals with a high purity(mp 199.5-201.0 ℃) are obtained; when DEAA is undried or the content of water in DEAA is above 20%, only platelets with bad quality are obtained even without crystals. The suitable synthesis conditions for DEAA and DEDAAC are 35 ℃, 6 h and 40 ℃, 36 h, respectively, and their yields are 69.7% and 67.3%, respectively.
文摘Previous study indicated that the thermo-sensitive genic malesterile(TGMS)gene in rice was regulated by temperature.TGMS rice plays an important role in hybrid rice production,because the application of the TGMS system in two-line breeding is laborsaving,timesaving,simple,inexpensive,efficient,and eliminating the limitations of the cytoplasmic male sterility(CMS)system.'AnnongS'is the first discovered and deeply studied TGMS rice lines in China.'AnnongS-1'and'Y58S',two derivatives of TGMS line AnnongS,were both controlled by a single recessive gene named tms5,which was genetically mapped on chromosome 2.In this study,three populations('AnnongS-1'×'Nanjing11','Y58S'×'Q611',and'Y58S'×'Guanghui122')were developed and used for the molecular fine mapping of the tms5 gene.By analyzing recombination events in the sterile individuals using a total of 125 probes covering the tms5 region,the tms5 gene was physically mapped to a 19-kb DNA fragment between two markers 4039-1 and 4039-2,which were located on the BAC clone AP004039.After the construction of the physical map between two markers 4039-1 and 4039-2,a member(ONAC023)of the NAC(NAM-ATAF-CUC-related)gene family was identified as the candidate gene of the tms5 gene.
基金The National Natural Science Foundation of China !(No .2 8970 817)
文摘The effects of adding cosolvents of diglyme and 15-crown-5 to the reaction mixture of Wurtz-type coupling of dichlorosilanes on the yield and relative molecular mass dispersity of polymethylphenethylsilane(PMPES) were discussed. The results show that addition of 10%(volume ratio of diglyme to toluene) diglyme as a cosolvent to the reaction mixture leads to the yield increase of PMPES with a monomodal distribution of relative molecular masses. Adding 10%diglyme to the reaction mixtures, the yields of polymethylcyclohexylsilane(PMCS) and copolymers (polymethylphenethylsilane-co-methylcyclohexylsilane), (the molar ratios of methylphenethyldichlorosilane to methylcyclohexyldichlorosilane were 2.0, 1.0 and 0.5, and the copolymers were abbreviated by Copolymers I, II, III, respectively) are 47%, 52%, 54%, 53%, respectively. Their relative molecular masses ([`(M)]w )(\bar M_w ) almost reach 105. These polysilanes were characterized by 1H-NMR, IR and UV absorption spectrum.
文摘Cotton disea ses represent a major challenge to cotton growth.Cloning of a cotton pathogen re-sponse gene and promoter is of great importance to improve disease resistance.In this study,a full length CC-NBS-LRRgene(GHNBS)and its 5L flanking sequence have been cloned by race and tail PCR and further studied.The entire coding region is 2583 bp and enco des a polypeptide of 861 a mino acids with 28%maximum homology to an R gene of Arabi dopsis depo sited in the GenBank.Semi quantitativeRT-PCR showed thatGHNBS was expressed in floral buds,petals,phloem,root s,and leaves,and it has a greater exp ression pattern in roots and leaves.
