The Banian sediment-hosted antimony deposit is a medium-scale deposit located in the Dushan County,South Guizhou,China.Calcite as the dominant gangue mineral can be divided into two types: white and pink,the later is ...The Banian sediment-hosted antimony deposit is a medium-scale deposit located in the Dushan County,South Guizhou,China.Calcite as the dominant gangue mineral can be divided into two types: white and pink,the later is more intimate with mineralization.It is interesting that the REE characteristics are展开更多
Based on the working principles of particle bed comminution, particles produced by high-pressure grinding rolls （HPGR） have surface properties different from particles produced by other grinding patterns, which exer...Based on the working principles of particle bed comminution, particles produced by high-pressure grinding rolls （HPGR） have surface properties different from particles produced by other grinding patterns, which exert great influence on mineral flotation. Flotation performances of calcite particles under different grinding patterns involving the use of HPGR, a jaw crusher, a dry ball mill, a wet ball mill, and a wet rod mill were studied using single mineral flotation tests. The surface properties of the particles under different grinding patterns were characterized to determine the flotation performance variation in terms of specific surface area, particle size distribution, AFM, XPS, and zeta potential. The results show that particles ground by HPGR exhibited improved flotation performance within the lower range of grinding fineness in both NaOL and dodecyl amine flotation systems compared to the particles prepared using other grinding patterns. Specific surface area, particle size distribution, surface roughness, Fe（III） contamination, binding energy, and zeta potential are greatly influenced by grinding patterns, which is the main cause of the flotation performance variation.展开更多
Phenoxyl acetic acids were applied to determine their depressing effect on minerals containing Ca2+/Mg2+ gangues. Calcite, mixture of calcite and fluorite, and nickel ore were used in the flotation. And the depression...Phenoxyl acetic acids were applied to determine their depressing effect on minerals containing Ca2+/Mg2+ gangues. Calcite, mixture of calcite and fluorite, and nickel ore were used in the flotation. And the depression mechanism was studied by the determination of contact angle, zeta potential, adsorptive capacity of collector, and IR analysis as well. It is found that 0.1 mmol/L of phenoxyl acetic acid derived from pyrogallol or gallic acid exhibits strong depressing ability on calcite in almost zero yields at pH value of 9.8, and calcite can be depressed in the flotation of calcite/fluorite mixture for approximate 87% yield of fluorite. The flotation result of practical nickel ore containing serpentine indicates that these two depressants may also show better depression performance to serpentine than traditional depressants such as sodium fluosilicate and carboxylmethyl cellulose. Analysis for the depression mechanism reveals that there exists strong chemical interaction between the depressants and minerals.展开更多
Based on the analysis of the morphology, order, cathodoluminescence and microelement of the calcite crystals in the pores of Upper Ordovician limestone in Tazhong oilfield of Tarim Basin, this paper suggest that the c...Based on the analysis of the morphology, order, cathodoluminescence and microelement of the calcite crystals in the pores of Upper Ordovician limestone in Tazhong oilfield of Tarim Basin, this paper suggest that the calcite crystals can divided 11 kinds of cements into three stages, and confirms their cementation sequence characteristics and formation environment. First stage of the cementation occurred on the bottom of the diagenetic environment, the product of which mainly are microcrystalline, fine shape, radiation fibrous, fasciculation, radiation axis shape calcites and a ball-like aragonite, whose filling pore is 0%–30%; the second one occurred in the atmospheric fresh water environment, with main cement types of crescent or pendulous shape, vadose silt, hyperplasia of coaxial, the filling pore of which is 5%–100%; the third one occurred in a burial environment, the crystals of which are bright and thick, mainly coarse sparry and poikilitic calcite, with filling pore of 5%–5%. In this paper, influence from each stage of cementation on porosity is analyzed, and pore evolution is established.展开更多
Marble that exploited for micronized calcite production in Nigde area (South Central Turkey) occur in the Upper Cretaceous Gümü ler, A gedi i, and Kaleboynu Formations of the Nigde Massif. Although there are...Marble that exploited for micronized calcite production in Nigde area (South Central Turkey) occur in the Upper Cretaceous Gümü ler, A gedi i, and Kaleboynu Formations of the Nigde Massif. Although there are a few marble producing quarries in the area, it is long been known that the marbles of this area are generally highly fractured and don’t yield large blocks or suitable slabs meeting the industrial demands. Thus, most of the production is currently carried out mainly as building stone, crushed stone and micronized calcite. Due mainly to high demand, micronized calcite has been becoming very significant export product to the state’s economy. Because the Nigde marbles are coarse grained with high CaCO3 content, high purity and whiteness, they are considered to be the highest quality micronized calcite quarries in the country. Consequently, the area drew many national and international investors resulting in significant increase in the number and extent of micronized calcite plants in the area. In early 1980’s, the city of Nigde had only one or two plants, it is now well over 5 including foreign investors and joint ventures. Annual production is also considerably increased from 20,000-30,000 tones to almost half a million tones and it is still in increasing trend.展开更多
This work aims to assessment of the calcitic ornamental stone waste for the stabilization of expansive soil. Calcitic rock-derived waste together with different expansive soils from Egypt were characterized and proces...This work aims to assessment of the calcitic ornamental stone waste for the stabilization of expansive soil. Calcitic rock-derived waste together with different expansive soils from Egypt were characterized and processed for stabilizer optimization. The mineral, chemical and engineering characteristics of the waste and the soil samples were examined using XRD, DTA, TGA, SEM, XRF as well as geotechnical characteristics such as liquid, plastic and shrinkage limits, plasticity index, free swelling, and uni-axial compressive strength, respectively. The calcitic waste has been calcined in an electrical muffle furnace at 1000℃ for 1 hour. The samples were treated by 0–8% waste post calcination for soaking time1– 4 weeks.展开更多
文摘The Banian sediment-hosted antimony deposit is a medium-scale deposit located in the Dushan County,South Guizhou,China.Calcite as the dominant gangue mineral can be divided into two types: white and pink,the later is more intimate with mineralization.It is interesting that the REE characteristics are
基金Project(2013EG132088)supported by Special Program for Research Institutes of the Ministry of Science and Technology,ChinaProject(12010402c187)supported by Key Science and Technology Program of Anhui Province,ChinaProject(GJKJ-14-89)supported by Science and Technology Program of Nanchang Institute of Science and Technology,China
文摘Based on the working principles of particle bed comminution, particles produced by high-pressure grinding rolls （HPGR） have surface properties different from particles produced by other grinding patterns, which exert great influence on mineral flotation. Flotation performances of calcite particles under different grinding patterns involving the use of HPGR, a jaw crusher, a dry ball mill, a wet ball mill, and a wet rod mill were studied using single mineral flotation tests. The surface properties of the particles under different grinding patterns were characterized to determine the flotation performance variation in terms of specific surface area, particle size distribution, AFM, XPS, and zeta potential. The results show that particles ground by HPGR exhibited improved flotation performance within the lower range of grinding fineness in both NaOL and dodecyl amine flotation systems compared to the particles prepared using other grinding patterns. Specific surface area, particle size distribution, surface roughness, Fe（III） contamination, binding energy, and zeta potential are greatly influenced by grinding patterns, which is the main cause of the flotation performance variation.
基金Project(Year 2005) supported by the Plan of High Learning Young Teacher of Zhejiang Province, China Project(2005A620015) supported by the Ningbo Youth Science Fund, ChinaProject(2004745) supported by the Ningbo University for PhD
文摘Phenoxyl acetic acids were applied to determine their depressing effect on minerals containing Ca2+/Mg2+ gangues. Calcite, mixture of calcite and fluorite, and nickel ore were used in the flotation. And the depression mechanism was studied by the determination of contact angle, zeta potential, adsorptive capacity of collector, and IR analysis as well. It is found that 0.1 mmol/L of phenoxyl acetic acid derived from pyrogallol or gallic acid exhibits strong depressing ability on calcite in almost zero yields at pH value of 9.8, and calcite can be depressed in the flotation of calcite/fluorite mixture for approximate 87% yield of fluorite. The flotation result of practical nickel ore containing serpentine indicates that these two depressants may also show better depression performance to serpentine than traditional depressants such as sodium fluosilicate and carboxylmethyl cellulose. Analysis for the depression mechanism reveals that there exists strong chemical interaction between the depressants and minerals.
基金Supported by Twelfth Five-Year Major National Science and Technology Projects of China (No.011ZX05004-004)
文摘Based on the analysis of the morphology, order, cathodoluminescence and microelement of the calcite crystals in the pores of Upper Ordovician limestone in Tazhong oilfield of Tarim Basin, this paper suggest that the calcite crystals can divided 11 kinds of cements into three stages, and confirms their cementation sequence characteristics and formation environment. First stage of the cementation occurred on the bottom of the diagenetic environment, the product of which mainly are microcrystalline, fine shape, radiation fibrous, fasciculation, radiation axis shape calcites and a ball-like aragonite, whose filling pore is 0%–30%; the second one occurred in the atmospheric fresh water environment, with main cement types of crescent or pendulous shape, vadose silt, hyperplasia of coaxial, the filling pore of which is 5%–100%; the third one occurred in a burial environment, the crystals of which are bright and thick, mainly coarse sparry and poikilitic calcite, with filling pore of 5%–5%. In this paper, influence from each stage of cementation on porosity is analyzed, and pore evolution is established.
文摘Marble that exploited for micronized calcite production in Nigde area (South Central Turkey) occur in the Upper Cretaceous Gümü ler, A gedi i, and Kaleboynu Formations of the Nigde Massif. Although there are a few marble producing quarries in the area, it is long been known that the marbles of this area are generally highly fractured and don’t yield large blocks or suitable slabs meeting the industrial demands. Thus, most of the production is currently carried out mainly as building stone, crushed stone and micronized calcite. Due mainly to high demand, micronized calcite has been becoming very significant export product to the state’s economy. Because the Nigde marbles are coarse grained with high CaCO3 content, high purity and whiteness, they are considered to be the highest quality micronized calcite quarries in the country. Consequently, the area drew many national and international investors resulting in significant increase in the number and extent of micronized calcite plants in the area. In early 1980’s, the city of Nigde had only one or two plants, it is now well over 5 including foreign investors and joint ventures. Annual production is also considerably increased from 20,000-30,000 tones to almost half a million tones and it is still in increasing trend.
文摘This work aims to assessment of the calcitic ornamental stone waste for the stabilization of expansive soil. Calcitic rock-derived waste together with different expansive soils from Egypt were characterized and processed for stabilizer optimization. The mineral, chemical and engineering characteristics of the waste and the soil samples were examined using XRD, DTA, TGA, SEM, XRF as well as geotechnical characteristics such as liquid, plastic and shrinkage limits, plasticity index, free swelling, and uni-axial compressive strength, respectively. The calcitic waste has been calcined in an electrical muffle furnace at 1000℃ for 1 hour. The samples were treated by 0–8% waste post calcination for soaking time1– 4 weeks.
