During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configura...During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.展开更多
To predict three-dimensional temperature distribution of molten aluminum and its influencing factors inside an industrial aluminum holding furnace,a fluid-solid coupled method was presented.The fluid-solid coupled mat...To predict three-dimensional temperature distribution of molten aluminum and its influencing factors inside an industrial aluminum holding furnace,a fluid-solid coupled method was presented.The fluid-solid coupled mathematics models of aluminum holding furnace in the premixed combustion processing were established based on mass conservation,moment conservation,momentum conservation,energy conservation and chemistry species conservation.Computational results agree well with the test data of the typical condition.The maximum combustion temperature is 1 850 K.The average temperature of the molten aluminum is 1 158 K,and the maximum temperature difference is about 240 K.The average temperature increases 0.3 ℃ while the temperature of combustion air increases 1 ℃.The optimal excess air ratio is 1.25-1.30.展开更多
Abstract： A joint solution model of variabk：-mass flow in two-phase region and fluid-solid coupling heat transfer, concerned about the charge process of variable-mass thermodynamic system, is built up and calculated...Abstract： A joint solution model of variabk：-mass flow in two-phase region and fluid-solid coupling heat transfer, concerned about the charge process of variable-mass thermodynamic system, is built up and calculated by the finite element method （FEM）. The results are basically consistent with relative experimental data. The calculated average heat transfer coefficient reaches 1.7~105 W/（m2. K）. When the equal percentage valve is used, the system needs the minimum requirements of valve control, but brings the highest construction cost. With the： decrease of initial steam pressure, the heat transfer intensity also weakens but the steam flow increases. With the initial water filling coefficient increasing or the temperature of steam supply decreasing, the amount of accumulative steam flow increases with the growth of steam pressure. When the pressure of steam supply drops, the steam flow gradient increases during the maximum opening period of control valve, and causes the maximum steam flow to increase.展开更多
For space-borne gravitational wave detection missions based on the heterodyne interferometry principle,tilt-to-length(TTL)coupling noise is an important optical noise source,significantly influencing the accuracy of t...For space-borne gravitational wave detection missions based on the heterodyne interferometry principle,tilt-to-length(TTL)coupling noise is an important optical noise source,significantly influencing the accuracy of the measurement system.We present a method for analyzing TTL coupling noise under the joint influence of multiple factors.An equivalent simulated optical bench for the test mass interferometer was designed,and Gaussian beam tracing was adopted to simulate beam propagation.By simulating the interference signal,it can analyze the impact of various factors on the TTL coupling noise,including positional,beam parameters,detector parameters,and signal definition factors.On this basis,a random parameter space composed of multiple influential factors was constructed within a range satisfying the analysis requirement,and the corresponding simulation results from random sampling were evaluated via variance-based global sensitivity analysis.The calculated results of the main and total effect indexes show that the test mass rotation angle and the piston effect(lateral)significantly influence the TTL coupling noise in the test mass interferometer.The analysis provides a qualitative reference for designing and optimizing space-borne laser interferometry systems.展开更多
The pressure solution model of granular aggregates was introduced into a FEM code which was developed for the analysis of thermo-hydro-mechanical(T-H-M) coupling in porous medium. Aimed at creating a hypothetical mode...The pressure solution model of granular aggregates was introduced into a FEM code which was developed for the analysis of thermo-hydro-mechanical(T-H-M) coupling in porous medium. Aimed at creating a hypothetical model of nuclear waste disposal in unsaturated quartz aggregate rock mass with laboratory scale, two 4-year computation cases were designed: 1) The porosity and permeability of rock mass are functions of the pressure solution; 2) The porosity and the permeability are constants. Calculation results show that the magnitude and distribution of stresses in the rock mass of these two calculation cases are roughly the same. And, the porosity and the permeability decrease to 43%-54% and 4.4%-9.1% of their original values after case 1 being accomplished; but the negative pore water pressures in cases 1 and 2 are respectively 1.0-1.25 and 1.0-1.1 times of their initial values under the action of nuclear waste. Case 1 exhibits the obvious effect of pressure solution.展开更多
When underground cavities are subjected to explosive stress waves,a uniquely damaged zone may appear due to the combined effect of dynamic loading and static pre-load stress.In this study,a rate-dependent two-dimensio...When underground cavities are subjected to explosive stress waves,a uniquely damaged zone may appear due to the combined effect of dynamic loading and static pre-load stress.In this study,a rate-dependent two-dimensional rock dynamic constitutive model was established to investigate the dynamic fractures of rocks under different static stress conditions.The effects of the loading rate and peak amplitude of the blasting wave under different confining pressures and the vertical compressive coefficient(K_(0))were considered.The numerical simulated results reproduced the initiation and further propagation of primary radial crack fractures,which were in agreement with the experimental results.The dynamic loading rate,peak amplitude,static vertical compressive coefficient(K_(0))and confining pressure affected the evolution of fractures around the borehole.The heterogeneity parameter(m)plays an important role in the evolution of fractures around the borehole.The crack propagation path became more discontinuous and rougher in a smallerheterogeneity parameter case.展开更多
Integrin activation,the transition from a low to a high affinity state,regulates the numerous cellular responses consequent to integrin engagement by extracellular matrix proteins.Kindlin proteins,play crucial roles i...Integrin activation,the transition from a low to a high affinity state,regulates the numerous cellular responses consequent to integrin engagement by extracellular matrix proteins.Kindlin proteins,play crucial roles in the integrin-signaling pathway by directly interacting with and activating integrins,which mediate the cell-extracellular matrix adhesion and signaling.As a widely distributed PTB domain protein and a major member of the kindlin family,kindlin2 interacts withβ3-tail,bridges talin-activated integrins to promote integrin aggregation,and enhances talin-induced integrin activation.Thus,kindlin2 is identified as a coactivator of integrins.Unlike talins,kindlin2 cannot directly alter the conformation of the integrin transmembrane helix and fail to activate integrin alone.Nevertheless,although it is widely accepted that kindlins and talins synergistically promote integrin activation,the underlying mechanism is unclear.Thus,the study of the force dissociation of the kindlin2/β3-tail complex and the conformation stabilization under different mechanical micro-environments should be of great significance for the further understanding of the structural basis of its synergistically activation of integrin.To reveal the molecular dynamics mechanism of interaction between kindlin2 andβ3-tail,we perform molecular dynamics(MD)simulations for this complex with different computing strategies interaction.In MD simulations,the available crystal structures of Kindlin-2/β3-tail complex(Protein Data Bank code 5XQ1)was downloaded from the PDB database.Two software packages,VMD for visualization and modeling and NAMD 2.13 for energy minimizations and MD simulations,were used here.The steadystate conformation of the complex was obtained from the equilibrium simulation.The dissociation event was observed by the constant velocity simulation,and the mechanical stability of the complex was observed by the constant force simulation.Our results showed that,during the equilibrium of the kindlin2-F3/β34ail complex,the residue MET612,LYS613 and TRP615 on the F3 domain of kindlin2 contributed to hydrogen-bonding with the corresponding residues onβ3 integrin.These bonds exhibit moderate or strong stability through steered molecular dynamics(SMD)simulation.During the constant velocity simulation,the complex exhibits a variety of unfolding pathways against tension applications,which are mainly distinguished by the disruption of hydrogen-bonds between the F3 domain a1/a2 helixes andβ1/β2 sheets.During the constant force simulation,the different phases of the composite force dissociation have different dissociation probabilities,which shows the biphasic force-dependent characteristics.And,the key residues in the pulling were recognized according not only to the number of interacting residue pairs,but also to their bond strength.Using molecular dynamics simulation,we showed the steady state of the kindlin2-F3/β3-tail complex under different tensile forces,and observe the dynamic process of molecular interaction.A possible underlying biophysical mechanism is that,the dissociation of Kindlin2-F3/β3-tail complex is biphasic force-dependent,and the conformations under different stretching states have different binding affinities.This study not only provides insights into the structural basis and mechanical regulation mechanisms of the kindlin/integrin interaction,in understanding in kindlin/integrin-related signaling in different cellular biological processes,but also provides new ideas for novel drug design and the treatment of related diseases.展开更多
The heated test pieces of diamond segments were treated by alternating magnetic field,the influences of magnetic treatment on microstructure densification of diamond segments were studied through metallurgical structu...The heated test pieces of diamond segments were treated by alternating magnetic field,the influences of magnetic treatment on microstructure densification of diamond segments were studied through metallurgical structure analysis.The experiment results indicated that,the densification of diamond segments was further improved after magnetized.The alternating magnetic force distributions in the diamond segments were calculated by numerical simulation according to the coupled field theory.In alternating magnetic field,a prodigious swirl current field appeared in the component.The magnetic vibrating due to alternating magnetic force was obvious,which was in favor of microcosmic structure compacter.The numerical analysis results provided direct evidences for that the alternating magnetic treatment can act as an effective technique to improve the microstructure densification of diamond segments.展开更多
砂土液化是常见的地震灾害,目前应用于研究砂土液化动力特性的室内试验以及模型试验还不能全面反映土体液化全过程。计算流体动力学(computational fluid dynamics,CFD)与离散元法(discrete element method,DEM)耦合模拟方法能够准确地...砂土液化是常见的地震灾害,目前应用于研究砂土液化动力特性的室内试验以及模型试验还不能全面反映土体液化全过程。计算流体动力学(computational fluid dynamics,CFD)与离散元法(discrete element method,DEM)耦合模拟方法能够准确地模拟各类水土耦合问题。通过二次开发的CFD-DEM流固耦合模块实现离散元软件PFC3D与计算流体力学软件OpenFOAM之间的力学信息交互,利用颗粒水下自由沉降验证该方法的可行性。利用PFC3D软件模拟室内循环三轴试验标定出具有真实饱和砂土动力特性的数值砂样。根据已有的参数信息以及耦合模拟方法建立了饱和砂土的场地液化模型。模拟结果表明,离散元法能够复现室内砂土液化试验,标定参数可应用于场地液化模拟;单颗粒沉降速度与理论解一致验证了CFD-DEM耦合方法的准确性;峰值加速度0.25g下不同深度处土体均会发生液化,液化时超孔压比无法达到1,超孔压累计值由浅层往深层递增;液化后土体强度自下而上逐渐恢复,再固结的场地土体结构呈现均匀化发展趋势。展开更多
In order to study the dynamic characteristics of the missile erection system,it can be considered as a rigid-flexible coupling multi-body system.Firstly,the actual system is abstracted as an equal and simplified one a...In order to study the dynamic characteristics of the missile erection system,it can be considered as a rigid-flexible coupling multi-body system.Firstly,the actual system is abstracted as an equal and simplified one and then the forces applied to it are analyzed.Secondly,the rigid-flexible coupling dynamic simulation for erection system is accomplished by use of the system simulation software,for example Pro/E,ADAMS,ANSYS,MATLAB/Simulink,etc.Finally,having the aid of simulation results,the kinetic and dynamic characteristics of the flexible bodies in erection system are analyzed.The simulation considering the erection system as a rigid-flexible coupling system can provide valuable results to the research of its kinetic,dynamic and vibrational characteristics.展开更多
文摘During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.
基金Project(2006AA03Z523) supported by the National High-Tech Research and Development Program of ChinaProject(08C26224302178) supported by the Innovation Foundation of Central South University,China
文摘To predict three-dimensional temperature distribution of molten aluminum and its influencing factors inside an industrial aluminum holding furnace,a fluid-solid coupled method was presented.The fluid-solid coupled mathematics models of aluminum holding furnace in the premixed combustion processing were established based on mass conservation,moment conservation,momentum conservation,energy conservation and chemistry species conservation.Computational results agree well with the test data of the typical condition.The maximum combustion temperature is 1 850 K.The average temperature of the molten aluminum is 1 158 K,and the maximum temperature difference is about 240 K.The average temperature increases 0.3 ℃ while the temperature of combustion air increases 1 ℃.The optimal excess air ratio is 1.25-1.30.
基金Project(20080431380) supported by China Postdoctoral Science Foundation
文摘Abstract： A joint solution model of variabk：-mass flow in two-phase region and fluid-solid coupling heat transfer, concerned about the charge process of variable-mass thermodynamic system, is built up and calculated by the finite element method （FEM）. The results are basically consistent with relative experimental data. The calculated average heat transfer coefficient reaches 1.7~105 W/（m2. K）. When the equal percentage valve is used, the system needs the minimum requirements of valve control, but brings the highest construction cost. With the： decrease of initial steam pressure, the heat transfer intensity also weakens but the steam flow increases. With the initial water filling coefficient increasing or the temperature of steam supply decreasing, the amount of accumulative steam flow increases with the growth of steam pressure. When the pressure of steam supply drops, the steam flow gradient increases during the maximum opening period of control valve, and causes the maximum steam flow to increase.
文摘For space-borne gravitational wave detection missions based on the heterodyne interferometry principle,tilt-to-length(TTL)coupling noise is an important optical noise source,significantly influencing the accuracy of the measurement system.We present a method for analyzing TTL coupling noise under the joint influence of multiple factors.An equivalent simulated optical bench for the test mass interferometer was designed,and Gaussian beam tracing was adopted to simulate beam propagation.By simulating the interference signal,it can analyze the impact of various factors on the TTL coupling noise,including positional,beam parameters,detector parameters,and signal definition factors.On this basis,a random parameter space composed of multiple influential factors was constructed within a range satisfying the analysis requirement,and the corresponding simulation results from random sampling were evaluated via variance-based global sensitivity analysis.The calculated results of the main and total effect indexes show that the test mass rotation angle and the piston effect(lateral)significantly influence the TTL coupling noise in the test mass interferometer.The analysis provides a qualitative reference for designing and optimizing space-borne laser interferometry systems.
基金Project(2010CB732101)supported by the National Key Basic Research and Development Program of ChinaProjects(51079145,51379201)supported by the National Natural Science Foundation of China
文摘The pressure solution model of granular aggregates was introduced into a FEM code which was developed for the analysis of thermo-hydro-mechanical(T-H-M) coupling in porous medium. Aimed at creating a hypothetical model of nuclear waste disposal in unsaturated quartz aggregate rock mass with laboratory scale, two 4-year computation cases were designed: 1) The porosity and permeability of rock mass are functions of the pressure solution; 2) The porosity and the permeability are constants. Calculation results show that the magnitude and distribution of stresses in the rock mass of these two calculation cases are roughly the same. And, the porosity and the permeability decrease to 43%-54% and 4.4%-9.1% of their original values after case 1 being accomplished; but the negative pore water pressures in cases 1 and 2 are respectively 1.0-1.25 and 1.0-1.1 times of their initial values under the action of nuclear waste. Case 1 exhibits the obvious effect of pressure solution.
基金Projects(51878190,51779031,51678170)supported by the National Natural Science Foundation of China。
文摘When underground cavities are subjected to explosive stress waves,a uniquely damaged zone may appear due to the combined effect of dynamic loading and static pre-load stress.In this study,a rate-dependent two-dimensional rock dynamic constitutive model was established to investigate the dynamic fractures of rocks under different static stress conditions.The effects of the loading rate and peak amplitude of the blasting wave under different confining pressures and the vertical compressive coefficient(K_(0))were considered.The numerical simulated results reproduced the initiation and further propagation of primary radial crack fractures,which were in agreement with the experimental results.The dynamic loading rate,peak amplitude,static vertical compressive coefficient(K_(0))and confining pressure affected the evolution of fractures around the borehole.The heterogeneity parameter(m)plays an important role in the evolution of fractures around the borehole.The crack propagation path became more discontinuous and rougher in a smallerheterogeneity parameter case.
基金supported by the National Natural Science Foundation of China ( 116272109, 11432006)
文摘Integrin activation,the transition from a low to a high affinity state,regulates the numerous cellular responses consequent to integrin engagement by extracellular matrix proteins.Kindlin proteins,play crucial roles in the integrin-signaling pathway by directly interacting with and activating integrins,which mediate the cell-extracellular matrix adhesion and signaling.As a widely distributed PTB domain protein and a major member of the kindlin family,kindlin2 interacts withβ3-tail,bridges talin-activated integrins to promote integrin aggregation,and enhances talin-induced integrin activation.Thus,kindlin2 is identified as a coactivator of integrins.Unlike talins,kindlin2 cannot directly alter the conformation of the integrin transmembrane helix and fail to activate integrin alone.Nevertheless,although it is widely accepted that kindlins and talins synergistically promote integrin activation,the underlying mechanism is unclear.Thus,the study of the force dissociation of the kindlin2/β3-tail complex and the conformation stabilization under different mechanical micro-environments should be of great significance for the further understanding of the structural basis of its synergistically activation of integrin.To reveal the molecular dynamics mechanism of interaction between kindlin2 andβ3-tail,we perform molecular dynamics(MD)simulations for this complex with different computing strategies interaction.In MD simulations,the available crystal structures of Kindlin-2/β3-tail complex(Protein Data Bank code 5XQ1)was downloaded from the PDB database.Two software packages,VMD for visualization and modeling and NAMD 2.13 for energy minimizations and MD simulations,were used here.The steadystate conformation of the complex was obtained from the equilibrium simulation.The dissociation event was observed by the constant velocity simulation,and the mechanical stability of the complex was observed by the constant force simulation.Our results showed that,during the equilibrium of the kindlin2-F3/β34ail complex,the residue MET612,LYS613 and TRP615 on the F3 domain of kindlin2 contributed to hydrogen-bonding with the corresponding residues onβ3 integrin.These bonds exhibit moderate or strong stability through steered molecular dynamics(SMD)simulation.During the constant velocity simulation,the complex exhibits a variety of unfolding pathways against tension applications,which are mainly distinguished by the disruption of hydrogen-bonds between the F3 domain a1/a2 helixes andβ1/β2 sheets.During the constant force simulation,the different phases of the composite force dissociation have different dissociation probabilities,which shows the biphasic force-dependent characteristics.And,the key residues in the pulling were recognized according not only to the number of interacting residue pairs,but also to their bond strength.Using molecular dynamics simulation,we showed the steady state of the kindlin2-F3/β3-tail complex under different tensile forces,and observe the dynamic process of molecular interaction.A possible underlying biophysical mechanism is that,the dissociation of Kindlin2-F3/β3-tail complex is biphasic force-dependent,and the conformations under different stretching states have different binding affinities.This study not only provides insights into the structural basis and mechanical regulation mechanisms of the kindlin/integrin interaction,in understanding in kindlin/integrin-related signaling in different cellular biological processes,but also provides new ideas for novel drug design and the treatment of related diseases.
基金supported by National Natural Science Foundation of China(50675190)
文摘The heated test pieces of diamond segments were treated by alternating magnetic field,the influences of magnetic treatment on microstructure densification of diamond segments were studied through metallurgical structure analysis.The experiment results indicated that,the densification of diamond segments was further improved after magnetized.The alternating magnetic force distributions in the diamond segments were calculated by numerical simulation according to the coupled field theory.In alternating magnetic field,a prodigious swirl current field appeared in the component.The magnetic vibrating due to alternating magnetic force was obvious,which was in favor of microcosmic structure compacter.The numerical analysis results provided direct evidences for that the alternating magnetic treatment can act as an effective technique to improve the microstructure densification of diamond segments.
文摘砂土液化是常见的地震灾害,目前应用于研究砂土液化动力特性的室内试验以及模型试验还不能全面反映土体液化全过程。计算流体动力学(computational fluid dynamics,CFD)与离散元法(discrete element method,DEM)耦合模拟方法能够准确地模拟各类水土耦合问题。通过二次开发的CFD-DEM流固耦合模块实现离散元软件PFC3D与计算流体力学软件OpenFOAM之间的力学信息交互,利用颗粒水下自由沉降验证该方法的可行性。利用PFC3D软件模拟室内循环三轴试验标定出具有真实饱和砂土动力特性的数值砂样。根据已有的参数信息以及耦合模拟方法建立了饱和砂土的场地液化模型。模拟结果表明,离散元法能够复现室内砂土液化试验,标定参数可应用于场地液化模拟;单颗粒沉降速度与理论解一致验证了CFD-DEM耦合方法的准确性;峰值加速度0.25g下不同深度处土体均会发生液化,液化时超孔压比无法达到1,超孔压累计值由浅层往深层递增;液化后土体强度自下而上逐渐恢复,再固结的场地土体结构呈现均匀化发展趋势。
文摘In order to study the dynamic characteristics of the missile erection system,it can be considered as a rigid-flexible coupling multi-body system.Firstly,the actual system is abstracted as an equal and simplified one and then the forces applied to it are analyzed.Secondly,the rigid-flexible coupling dynamic simulation for erection system is accomplished by use of the system simulation software,for example Pro/E,ADAMS,ANSYS,MATLAB/Simulink,etc.Finally,having the aid of simulation results,the kinetic and dynamic characteristics of the flexible bodies in erection system are analyzed.The simulation considering the erection system as a rigid-flexible coupling system can provide valuable results to the research of its kinetic,dynamic and vibrational characteristics.
