The hollow centre cracked disc(HCCD) specimen is one of the suggested alternative methods for determining the fracture toughness of rock. This work aims to investigate the fracture mechanism in HCCD in macro- and micr...The hollow centre cracked disc(HCCD) specimen is one of the suggested alternative methods for determining the fracture toughness of rock. This work aims to investigate the fracture mechanism in HCCD in macro- and micro-scales using numerical methods, extended finite element method(X-FEM) and particle flow code(PFC) modeling, respectively. In the X-FEM, heaviside and near-tip enrichment functions are employed to consider the presence of the crack in the model. In PFC modeling the movement and interaction of stressed assemblies of rigid spherical particles are modeled using the distinct element method(DEM). A numerical code called MEX-FEM based on XFEM has been developed to simulate the problems involving crack. The models of pure modes I and Ⅱ in macro-scale are simulated in micro-scale. The results show that dimensionless stress intensity factors(YI, YⅡ) for pure modes I and Ⅱ increase by increasing the crack length ratio. The angle at which the pure mode Ⅱ occurs decreases by increasing the crack length ratio. In mixed mode I-Ⅱ, The value of YI decreases by increasing the crack angle, while the value of YⅡ increases to a given crack angle and then it decreases. Moreover, the fracture in micro-scale, unlike the macro-scale, includes a combination of different modes of fracturing.展开更多
基于福建省冬半年沿海和港湾岛屿自动站的逐时极大风观测资料和WRF（Weather Research and Forecast）、EC（European Centre for Medium-Range Weather Forecasts）细网格以及T639（TL639L60）三种模式预报的10 m风场资料，将模式预报...基于福建省冬半年沿海和港湾岛屿自动站的逐时极大风观测资料和WRF（Weather Research and Forecast）、EC（European Centre for Medium-Range Weather Forecasts）细网格以及T639（TL639L60）三种模式预报的10 m风场资料，将模式预报的风向风速与观测资料进行对比检验，结果表明：福建省沿海冬半年大风的盛行风向以东北风为主，大风的时空分布极为不均，沿海风力的脉动性、跳跃性、局地性突出。从三种模式对风速风向的模拟效果来看， WRF和EC细网格的预报效果较好，有可参考性， T639可参考性不高。对于风速，模式预报结果相比实况极大风速偏小，港湾岛屿代表站风速的平均绝对误差均小于沿海代表站，预报平均误差由沿海向内陆逐渐减小，由中部向南北逐渐减小。风向相比风速的预报效果要差， WRF和EC细网格的风向预报误差在45°-50°，有一定的参考意义；港湾岛屿代表站风向的平均绝对误差大于沿海代表站，以浮标站的误差最大。当观测风速出现7级及以上风速时，若对大风进行分级检验，则较低风速的预报平均绝对误差小于较高风速；风向预报的平均绝对误差也大大降低，且误差都在45°以内，具有良好的参考性。展开更多
In order to obtain the remote center motion(RCM) mechanism with better performance indexes and avoid the collision of multi-manipulators in minimally invasive surgery(MIS), a novel multi-objective optimization model w...In order to obtain the remote center motion(RCM) mechanism with better performance indexes and avoid the collision of multi-manipulators in minimally invasive surgery(MIS), a novel multi-objective optimization model was presented. There were two optimization objectives: a global kinematic performance index and a comprehensive stiffness index. Other indexes to characterize the design requirements such as collision probability, workspace, mechanism parameter, mass, and wall thickness were considered as constraints. Angles between two adjacent joints and cross-section dimensions of links were chosen as the design variables. The non-dominated sorting genetic algorithm II(NSGA-II) was adopted to solve the complex multi-objective optimization problem. Then, a 3-degree of freedom(DoF) MIS robotic prototype based on optimization results has been built up. The experiments to test the spatial position change of the remote center point and to test the absolute position accuracy and repetitive position accuracy of the MIS robot were achieved, and the experimental results meet the requirements of MIS.展开更多
Using European Centre for Medium-Range Weather Forecasts Reanalysis V5(ERA5)reanalysis data,this study investigated the reconstruction effects of various climate variabilities on surface wind speed in China from 1979 ...Using European Centre for Medium-Range Weather Forecasts Reanalysis V5(ERA5)reanalysis data,this study investigated the reconstruction effects of various climate variabilities on surface wind speed in China from 1979 to 2022.The results indicated that the reconstructed annual mean wind speed and the standard deviation of the annual mean wind speed,utilizing various climate variability indices,exhibited similar spatial modes to the reanalysis data,with spatial correlation coefficients of 0.99 and 0.94,respectively.In the reconstruction of six major wind power installed capacity provinces/autonomous regions in China,the effects were notably good for Hebei and Shanxi provinces,with the correlation coefficients for the interannual regional average wind speed time series being 0.65 and 0.64,respectively.The reconstruction effects of surface wind speed differed across seasons,with spring and summer reconstructions showing the highest correlation with reanalysis data.The correlation coefficients for all seasons across most regions in China ranged between 0.4 and 0.8.Among the reconstructed seasonal wind speeds for the six provinces/autonomous regions,Shanxi Province in spring exhibited the highest correlation with the reanalysis,with a coefficient of 0.61.The large-scale climate variability indices showed good reconstruction effects on the annual mean wind speed in China,and could explain the interannual variability trends of surface wind speed in most regions of China,particularly in the main wind energy provinces/autonomous regions.展开更多
文摘The hollow centre cracked disc(HCCD) specimen is one of the suggested alternative methods for determining the fracture toughness of rock. This work aims to investigate the fracture mechanism in HCCD in macro- and micro-scales using numerical methods, extended finite element method(X-FEM) and particle flow code(PFC) modeling, respectively. In the X-FEM, heaviside and near-tip enrichment functions are employed to consider the presence of the crack in the model. In PFC modeling the movement and interaction of stressed assemblies of rigid spherical particles are modeled using the distinct element method(DEM). A numerical code called MEX-FEM based on XFEM has been developed to simulate the problems involving crack. The models of pure modes I and Ⅱ in macro-scale are simulated in micro-scale. The results show that dimensionless stress intensity factors(YI, YⅡ) for pure modes I and Ⅱ increase by increasing the crack length ratio. The angle at which the pure mode Ⅱ occurs decreases by increasing the crack length ratio. In mixed mode I-Ⅱ, The value of YI decreases by increasing the crack angle, while the value of YⅡ increases to a given crack angle and then it decreases. Moreover, the fracture in micro-scale, unlike the macro-scale, includes a combination of different modes of fracturing.
文摘基于福建省冬半年沿海和港湾岛屿自动站的逐时极大风观测资料和WRF（Weather Research and Forecast）、EC（European Centre for Medium-Range Weather Forecasts）细网格以及T639（TL639L60）三种模式预报的10 m风场资料，将模式预报的风向风速与观测资料进行对比检验，结果表明：福建省沿海冬半年大风的盛行风向以东北风为主，大风的时空分布极为不均，沿海风力的脉动性、跳跃性、局地性突出。从三种模式对风速风向的模拟效果来看， WRF和EC细网格的预报效果较好，有可参考性， T639可参考性不高。对于风速，模式预报结果相比实况极大风速偏小，港湾岛屿代表站风速的平均绝对误差均小于沿海代表站，预报平均误差由沿海向内陆逐渐减小，由中部向南北逐渐减小。风向相比风速的预报效果要差， WRF和EC细网格的风向预报误差在45°-50°，有一定的参考意义；港湾岛屿代表站风向的平均绝对误差大于沿海代表站，以浮标站的误差最大。当观测风速出现7级及以上风速时，若对大风进行分级检验，则较低风速的预报平均绝对误差小于较高风速；风向预报的平均绝对误差也大大降低，且误差都在45°以内，具有良好的参考性。
基金Project(SS2012AA041601)supported by the National High Technology Research and Development Program of ChinaProject(81201150)supported by the National Natural Science Foundation of China
文摘In order to obtain the remote center motion(RCM) mechanism with better performance indexes and avoid the collision of multi-manipulators in minimally invasive surgery(MIS), a novel multi-objective optimization model was presented. There were two optimization objectives: a global kinematic performance index and a comprehensive stiffness index. Other indexes to characterize the design requirements such as collision probability, workspace, mechanism parameter, mass, and wall thickness were considered as constraints. Angles between two adjacent joints and cross-section dimensions of links were chosen as the design variables. The non-dominated sorting genetic algorithm II(NSGA-II) was adopted to solve the complex multi-objective optimization problem. Then, a 3-degree of freedom(DoF) MIS robotic prototype based on optimization results has been built up. The experiments to test the spatial position change of the remote center point and to test the absolute position accuracy and repetitive position accuracy of the MIS robot were achieved, and the experimental results meet the requirements of MIS.
基金the National Natural Science Foundation of China(42176243)。
文摘Using European Centre for Medium-Range Weather Forecasts Reanalysis V5(ERA5)reanalysis data,this study investigated the reconstruction effects of various climate variabilities on surface wind speed in China from 1979 to 2022.The results indicated that the reconstructed annual mean wind speed and the standard deviation of the annual mean wind speed,utilizing various climate variability indices,exhibited similar spatial modes to the reanalysis data,with spatial correlation coefficients of 0.99 and 0.94,respectively.In the reconstruction of six major wind power installed capacity provinces/autonomous regions in China,the effects were notably good for Hebei and Shanxi provinces,with the correlation coefficients for the interannual regional average wind speed time series being 0.65 and 0.64,respectively.The reconstruction effects of surface wind speed differed across seasons,with spring and summer reconstructions showing the highest correlation with reanalysis data.The correlation coefficients for all seasons across most regions in China ranged between 0.4 and 0.8.Among the reconstructed seasonal wind speeds for the six provinces/autonomous regions,Shanxi Province in spring exhibited the highest correlation with the reanalysis,with a coefficient of 0.61.The large-scale climate variability indices showed good reconstruction effects on the annual mean wind speed in China,and could explain the interannual variability trends of surface wind speed in most regions of China,particularly in the main wind energy provinces/autonomous regions.
