Frame detection is important in burst communication systems for its contribu- tions in frame synchronization. It locates the information bits in the received data stream at receivers. To realize frame detection in the...Frame detection is important in burst communication systems for its contribu- tions in frame synchronization. It locates the information bits in the received data stream at receivers. To realize frame detection in the presence of additive white Gaussian noise （AWGN） and frequency offset, a constant false alarm rate （CFAR） detector is proposed through exploitation of cyclic autocorrelation feature implied in the preamble. The frame detection can be achieved prior to bit timing recovery. The threshold setting is independent of the signal level and noise level by utilizing CFAR method. Mathematical expressions is derived in AWGN channel by considering the probability of false alarm and probability of detection, separately. Given the probability of false alarm, the mathematical relationship between the frame detection performance and EJNo of received signals is established. Ex- perimental results are also presented in accor- dance with analysis.展开更多
Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed ...Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform （DSWT）and higher order statist!cs, is proposed for processing noisy data from underground mines. The objectives of this method are to （1） Improve manual detection and tPicking of P-phase onset; and （ii） provide an automatic means of detecting and picking P-phase onset me accurately. The DSWT is first used to filter the signal over several scales. The manual P-phase onset detection and picking are then obtained by computing the signal energy across selected scales with frequency bands that capture the signal of interest. The automatic P-phase onset, on the other hand, is achieved by using skewness- and kurtosis-based criterion applied to selected scales in a time-frequency domain. The method was tested using synthetic and field data from an underground limestone mine. Results were compared with results obtained by using the short-term to long-term average （STA/LTA） ratio and that by Reference Ge et al. （2009）. The results show that the me!hod provides a more reliable estimate of the P-phase onset arrival than the STA]LTA method when the signal to noise ratio is very low. Also, the results obtained from the field data matched accurately with the results from Reference Ge et al. （2009）.展开更多
Faced with the evolving attacks in recommender systems, many detection features have been proposed by human engineering and used in supervised or unsupervised detection methods. However, the detection features extract...Faced with the evolving attacks in recommender systems, many detection features have been proposed by human engineering and used in supervised or unsupervised detection methods. However, the detection features extracted by human engineering are usually aimed at some specific types of attacks. To further detect other new types of attacks, the traditional methods have to re-extract detection features with high knowledge cost. To address these limitations, the method for automatic extraction of robust features is proposed and then an Adaboost-based detection method is presented. Firstly, to obtain robust representation with prior knowledge, unlike uniform corruption rate in traditional mLDA(marginalized Linear Denoising Autoencoder), different corruption rates for items are calculated according to the ratings’ distribution. Secondly, the ratings sparsity is used to weight the mapping matrix to extract low-dimensional representation. Moreover, the uniform corruption rate is also set to the next layer in mSLDA(marginalized Stacked Linear Denoising Autoencoder) to extract the stable and robust user features. Finally, under the robust feature space, an Adaboost-based detection method is proposed to alleviate the imbalanced classification problem. Experimental results on the Netflix and Amazon review datasets indicate that the proposed method can effectively detect various attacks.展开更多
Due to the influence of terrain structure,meteorological conditions and various factors,there are anomalous data in automatic dependent surveillance-broadcast(ADS-B)message.The ADS-B equipment can be used for position...Due to the influence of terrain structure,meteorological conditions and various factors,there are anomalous data in automatic dependent surveillance-broadcast(ADS-B)message.The ADS-B equipment can be used for positioning of general aviation aircraft.Aim to acquire the accurate position information of aircraft and detect anomaly data,the ADS-B anomaly data detection model based on deep learning and difference of Gaussian(DoG)approach is proposed.First,according to the characteristic of ADS-B data,the ADS-B position data are transformed into the coordinate system.And the origin of the coordinate system is set up as the take-off point.Then,based on the kinematic principle,the ADS-B anomaly data can be removed.Moreover,the details of the ADS-B position data can be got by the DoG approach.Finally,the long short-term memory(LSTM)neural network is used to optimize the recurrent neural network(RNN)with severe gradient reduction for processing ADS-B data.The position data of ADS-B are reconstructed by the sequence to sequence(seq2seq)model which is composed of LSTM neural network,and the reconstruction error is used to detect the anomalous data.Based on the real flight data of general aviation aircraft,the simulation results show that the anomaly data can be detected effectively by the proposed method of reconstructing ADS-B data with the seq2seq model,and its running time is reduced.Compared with the RNN,the accuracy of anomaly detection is increased by 2.7%.The performance of the proposed model is better than that of the traditional anomaly detection models.展开更多
Wavelet forced de-noising algorithm is suitable for denoising of unsteady drilling fluid pulse signal, including baseline drift rectification and two-stage de-noising processing of frame synchronization signal and ins...Wavelet forced de-noising algorithm is suitable for denoising of unsteady drilling fluid pulse signal, including baseline drift rectification and two-stage de-noising processing of frame synchronization signal and instruction signal. Two-stage de-noising processing can reduce the impact of baseline drift and determine automatic peak detection threshold range for signal recognition by distinguishing different features of frame synchronization pulse and instruction pulse. Rising and falling edge relative protruding threshold is defined for peak detection in signal recognition, which can make full use of the degree of the signal peak change and detect peaks flexibly with rising and falling edge relative protruding threshold combination. A synchronous decoding method was designed to reduce position uncertainty of the frame synchronization pulse and eliminate the accumulative error of time base drift, which determines the first instruction pulse position according to position of the frame synchronization pulse and decodes subsequent instruction pulse by taking current instruction pulse as new bit synchronization pulse. Special tool software was developed to tune algorithm parameters, which has a decoding success rate of about 95% for the universal coded signals. For the special coded signals with check byte, decoding success rate using the automatic threshold adjustment algorithm is as high as 99%.展开更多
A simple method using aided sliding rectangular windows for synchronization in energy detector （ED） receiver is proposed for impulse-based ultra wideband radios （IR-UWB） under binary pulse position modulation （PP...A simple method using aided sliding rectangular windows for synchronization in energy detector （ED） receiver is proposed for impulse-based ultra wideband radios （IR-UWB） under binary pulse position modulation （PPM）, therefore grants an attractive solution for gaining low complexity while the accompanying performance loss in terms of UWB signal reception is comparatively low. Also, a method is developed to sup- press noise through accumulation of integrated results before synchronization point is reached. This proposed method can effectively reduce the impact of one of the major performance-degrading factors in ED receivers, i. e., noise caused by heightened noise floor due to large bandwidth product. Our theoretic work on this im- proved synchronization performance and relevant simulations are conducted on IEEE 802.15.4a channel mod- els, and results show that the proposed design scheme can effectively decrease both the probability of false alarm and probability of missed detection.展开更多
基金supported by National Science Foundation of China under Grant No.61401205
文摘Frame detection is important in burst communication systems for its contribu- tions in frame synchronization. It locates the information bits in the received data stream at receivers. To realize frame detection in the presence of additive white Gaussian noise （AWGN） and frequency offset, a constant false alarm rate （CFAR） detector is proposed through exploitation of cyclic autocorrelation feature implied in the preamble. The frame detection can be achieved prior to bit timing recovery. The threshold setting is independent of the signal level and noise level by utilizing CFAR method. Mathematical expressions is derived in AWGN channel by considering the probability of false alarm and probability of detection, separately. Given the probability of false alarm, the mathematical relationship between the frame detection performance and EJNo of received signals is established. Ex- perimental results are also presented in accor- dance with analysis.
文摘Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform （DSWT）and higher order statist!cs, is proposed for processing noisy data from underground mines. The objectives of this method are to （1） Improve manual detection and tPicking of P-phase onset; and （ii） provide an automatic means of detecting and picking P-phase onset me accurately. The DSWT is first used to filter the signal over several scales. The manual P-phase onset detection and picking are then obtained by computing the signal energy across selected scales with frequency bands that capture the signal of interest. The automatic P-phase onset, on the other hand, is achieved by using skewness- and kurtosis-based criterion applied to selected scales in a time-frequency domain. The method was tested using synthetic and field data from an underground limestone mine. Results were compared with results obtained by using the short-term to long-term average （STA/LTA） ratio and that by Reference Ge et al. （2009）. The results show that the me!hod provides a more reliable estimate of the P-phase onset arrival than the STA]LTA method when the signal to noise ratio is very low. Also, the results obtained from the field data matched accurately with the results from Reference Ge et al. （2009）.
基金supported by the National Natural Science Foundation of China [Nos. 61772452, 61379116]the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi [No.2019L0847]the Natural Science Foundation of Hebei Province, China [No. F2015203046]
文摘Faced with the evolving attacks in recommender systems, many detection features have been proposed by human engineering and used in supervised or unsupervised detection methods. However, the detection features extracted by human engineering are usually aimed at some specific types of attacks. To further detect other new types of attacks, the traditional methods have to re-extract detection features with high knowledge cost. To address these limitations, the method for automatic extraction of robust features is proposed and then an Adaboost-based detection method is presented. Firstly, to obtain robust representation with prior knowledge, unlike uniform corruption rate in traditional mLDA(marginalized Linear Denoising Autoencoder), different corruption rates for items are calculated according to the ratings’ distribution. Secondly, the ratings sparsity is used to weight the mapping matrix to extract low-dimensional representation. Moreover, the uniform corruption rate is also set to the next layer in mSLDA(marginalized Stacked Linear Denoising Autoencoder) to extract the stable and robust user features. Finally, under the robust feature space, an Adaboost-based detection method is proposed to alleviate the imbalanced classification problem. Experimental results on the Netflix and Amazon review datasets indicate that the proposed method can effectively detect various attacks.
基金supported by the National Key R&D Program of China(No.2018AAA0100804)the Talent Project of Revitalization Liaoning(No.XLYC1907022)+5 种基金the Key R&D Projects of Liaoning Province(No.2020JH2/10100045)the Capacity Building of Civil Aviation Safety(No.TMSA1614)the Natural Science Foundation of Liaoning Province(No.2019-MS-251)the Scientific Research Project of Liaoning Provincial Department of Education(Nos.L201705,L201716)the High-Level Innovation Talent Project of Shenyang(No.RC190030)the Second Young and Middle-Aged Talents Support Program of Shenyang Aerospace University.
文摘Due to the influence of terrain structure,meteorological conditions and various factors,there are anomalous data in automatic dependent surveillance-broadcast(ADS-B)message.The ADS-B equipment can be used for positioning of general aviation aircraft.Aim to acquire the accurate position information of aircraft and detect anomaly data,the ADS-B anomaly data detection model based on deep learning and difference of Gaussian(DoG)approach is proposed.First,according to the characteristic of ADS-B data,the ADS-B position data are transformed into the coordinate system.And the origin of the coordinate system is set up as the take-off point.Then,based on the kinematic principle,the ADS-B anomaly data can be removed.Moreover,the details of the ADS-B position data can be got by the DoG approach.Finally,the long short-term memory(LSTM)neural network is used to optimize the recurrent neural network(RNN)with severe gradient reduction for processing ADS-B data.The position data of ADS-B are reconstructed by the sequence to sequence(seq2seq)model which is composed of LSTM neural network,and the reconstruction error is used to detect the anomalous data.Based on the real flight data of general aviation aircraft,the simulation results show that the anomaly data can be detected effectively by the proposed method of reconstructing ADS-B data with the seq2seq model,and its running time is reduced.Compared with the RNN,the accuracy of anomaly detection is increased by 2.7%.The performance of the proposed model is better than that of the traditional anomaly detection models.
基金Supported by the China National Science and Technology Major Project(2016ZX05020005-001)
文摘Wavelet forced de-noising algorithm is suitable for denoising of unsteady drilling fluid pulse signal, including baseline drift rectification and two-stage de-noising processing of frame synchronization signal and instruction signal. Two-stage de-noising processing can reduce the impact of baseline drift and determine automatic peak detection threshold range for signal recognition by distinguishing different features of frame synchronization pulse and instruction pulse. Rising and falling edge relative protruding threshold is defined for peak detection in signal recognition, which can make full use of the degree of the signal peak change and detect peaks flexibly with rising and falling edge relative protruding threshold combination. A synchronous decoding method was designed to reduce position uncertainty of the frame synchronization pulse and eliminate the accumulative error of time base drift, which determines the first instruction pulse position according to position of the frame synchronization pulse and decodes subsequent instruction pulse by taking current instruction pulse as new bit synchronization pulse. Special tool software was developed to tune algorithm parameters, which has a decoding success rate of about 95% for the universal coded signals. For the special coded signals with check byte, decoding success rate using the automatic threshold adjustment algorithm is as high as 99%.
基金Sponsored by the Ministerial Level Advanced Research Foundation (2006AA018293)
文摘A simple method using aided sliding rectangular windows for synchronization in energy detector （ED） receiver is proposed for impulse-based ultra wideband radios （IR-UWB） under binary pulse position modulation （PPM）, therefore grants an attractive solution for gaining low complexity while the accompanying performance loss in terms of UWB signal reception is comparatively low. Also, a method is developed to sup- press noise through accumulation of integrated results before synchronization point is reached. This proposed method can effectively reduce the impact of one of the major performance-degrading factors in ED receivers, i. e., noise caused by heightened noise floor due to large bandwidth product. Our theoretic work on this im- proved synchronization performance and relevant simulations are conducted on IEEE 802.15.4a channel mod- els, and results show that the proposed design scheme can effectively decrease both the probability of false alarm and probability of missed detection.
