期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
基于Pt/Au双金属修饰针灸针的非酶葡萄糖传感器 被引量:1
1
作者 肖琪 刘光献 +3 位作者 陈简单 尹争志 顾春川 刘红英 《无机化学学报》 SCIE CAS CSCD 北大核心 2022年第6期1159-1170,共12页
通过在不锈钢针灸针(AN)表面依次电沉积金(Au)纳米颗粒和铂(Pt)纳米颗粒,基于它们在AN表面的协同作用,实现了一种用于非酶葡萄糖检测的电化学生物传感器。首先,通过扫描电子显微镜对其功能界面(Pt/Au/AN)进行表征,结果显示类似卷心菜的... 通过在不锈钢针灸针(AN)表面依次电沉积金(Au)纳米颗粒和铂(Pt)纳米颗粒,基于它们在AN表面的协同作用,实现了一种用于非酶葡萄糖检测的电化学生物传感器。首先,通过扫描电子显微镜对其功能界面(Pt/Au/AN)进行表征,结果显示类似卷心菜的纳米材料均匀致密地分布在AN表面。然后,通过循环伏安法和电化学阻抗法对Pt/Au/AN电极的电化学特性进行了研究。结果表明,与Au/AN或Pt/AN电极相比,Pt/Au/AN电极对葡萄糖氧化表现出优越的电催化活性。这表明双金属Pt/Au的接触界面是葡萄糖氧化的重要电催化位点。在pH 7.4的模拟生理介质中,制得传感器的线性范围为0.1~35 mmol·L^(-1),检测限为0.0763 mmol·L^(-1),对葡萄糖的检测表现出较高的灵敏度和良好的抗干扰性能、稳定性。此外,该传感器已成功用于人体血清葡萄糖的检测。 展开更多
关键词 针灸针 pt/au双金属接触界面 非酶传感器 葡萄糖
在线阅读 下载PDF
Pt/Au双金属纳米粒子的制备及表征 被引量:14
2
作者 徐娇珍 杨平 +2 位作者 华南平 胡成松 杜玉扣 《化学研究与应用》 CAS CSCD 北大核心 2003年第6期838-840,共3页
Poly(N-vinyl-2-pyrrolidone)-protected Pt/Au bimetallic nanoparticles were obtained by reducing the mixture of HAuCl4 and H2PtCl6 with sodium borohydride.UV-vis spectra,transmission electronic microscopy and X-ray di... Poly(N-vinyl-2-pyrrolidone)-protected Pt/Au bimetallic nanoparticles were obtained by reducing the mixture of HAuCl4 and H2PtCl6 with sodium borohydride.UV-vis spectra,transmission electronic microscopy and X-ray diffraction reveal that the prepared bimetallic nanoparticles are of alloy structure. 展开更多
关键词 pt au 双金属纳米粒子 制备 表征 催化剂
在线阅读 下载PDF
Pt/Au双金属纳米粒子和壳聚糖/二氧化硅溶胶-凝胶杂化膜漆酶传感电极的邻苯二酚检测 被引量:2
3
作者 娄童芳 屈建莹 +2 位作者 邢欢欢 杜学萍 董莹 《电化学》 CAS CSCD 北大核心 2014年第2期177-183,共7页
利用Pt/Au双金属纳米粒子和壳聚糖/二氧化硅(CS—SiO2)溶胶-凝胶复合材料固定漆酶(Lac),制得漆酶生物电极(Pt-Au-CS—SiO2-Lac/GC).采用循环伏安曲线(cV)研究了邻苯二酚(cc)在该漆酶电极的电化学性能.实验结果表明,Pt... 利用Pt/Au双金属纳米粒子和壳聚糖/二氧化硅(CS—SiO2)溶胶-凝胶复合材料固定漆酶(Lac),制得漆酶生物电极(Pt-Au-CS—SiO2-Lac/GC).采用循环伏安曲线(cV)研究了邻苯二酚(cc)在该漆酶电极的电化学性能.实验结果表明,Pt-Au—CS—SiO2-Lac/GC电极对邻苯二酚的电催化在8×10-7~1×10-4mol·L。浓度范围,其浓度与还原峰电流呈线性关系,相关系数r=0.9993,检出限7.9×10-8mol·L-1,该检测方法灵敏度高,线性范围宽,稳定性好. 展开更多
关键词 漆酶 壳聚糖/二氧化硅溶胶-凝胶 pt/au双金属纳米粒子 邻苯二酚
在线阅读 下载PDF
金属离子修饰的Ru-Pt/γ-Al_2O_3催化p-CNB选择性加氢 被引量:5
4
作者 赵松林 陈骏如 +2 位作者 周娅芬 谢永美 李贤均 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2004年第8期1552-1554,M011,共4页
The bimetallic catalyst Ru-Pt/ γ -Al 2O 3 was prepared by impregnating H 2PtCl 6 and RuCl 3 aqueous solution in the presence of PVP(40 000). Its catalytic performance in selective hydrogenation of \{ p -chloronitrobe... The bimetallic catalyst Ru-Pt/ γ -Al 2O 3 was prepared by impregnating H 2PtCl 6 and RuCl 3 aqueous solution in the presence of PVP(40 000). Its catalytic performance in selective hydrogenation of \{ p -chloronitrobenzene\}( p -CNB) was studied. The results indicate that the activity of Ru-Pt/ γ -Al 2O 3[\{ n (ruthenium)\}∶ n (platinum)=4∶1] is much higher than that of Ru/ γ -Al 2O 3,while the amount of dehalogenation product(aniline) and other by-products are much fewer than that by using Pt/ γ -Al 2O 3 as the catalyst. There is synergistic effect of ruthenium and platinum in bimetallic catalyst for selective hydrogenation of p -CNB. Under the reaction conditions t =50 ℃, p H 2 = 1.0 MPa, reaction time 60 min,\{ n (substrate)∶\} n (total amount of metal content)=1000∶1,the conversion of p -CNB and the selectivity to p -chloroaniline( p -CNA) by using Ru-Pt/ γ -Al 2O 3 as the catalyst are 48.2% and 85.9%,respectively. The effect of other metal cations(introduced to the reaction system with the corresponding metal chloride solution) on the reaction was investigated. It was found that catalytic performance of Ru-Pt/ γ -Al 2O 3 could be greatly improved by modfication of some metal cations. When Co 2+ and Ni 2+ were used as modifiers for the catalyst Ru-Pt/ γ -Al 2O 3 under above mentioned reaction conditions,the conversions of p -CNB increase to 74.5% and 87.8%,as well as the selectivities of p -CAN increase to 98.9% and 99.4%,respectively. Fe 3+ and Sn 4+ were the best modifiers for Ru-Pt/ γ -Al 2O 3 under the same reaction conditions. The conversions of p -CNB and the selectivities of p -CAN can reach 100% and >99.0%,respectively. However,the catalysts can be poisoned by Zn 2+ and Sn 2+ . 展开更多
关键词 Ru—pt/7-Al2O3 双金属催化剂 对-氯硝基苯 选择加氢 金属离子修饰
在线阅读 下载PDF
电场调制下石墨烯基气体传感器氨气响应性能研究
5
作者 赵珉 褚卫国 +1 位作者 刘桂英 纪捷先 《传感技术学报》 北大核心 2025年第3期442-450,共9页
为实现室温下石墨烯基气体传感器对氨气的快速、灵敏和稳定响应,设计了一种具有场效应管结构的器件,并对比了背栅电压对原始石墨烯器件、Au或Pt单一金属修饰以及Au/Pt双金属修饰的石墨烯器件室温下氨气响应性能的影响。金属修饰使得石... 为实现室温下石墨烯基气体传感器对氨气的快速、灵敏和稳定响应,设计了一种具有场效应管结构的器件,并对比了背栅电压对原始石墨烯器件、Au或Pt单一金属修饰以及Au/Pt双金属修饰的石墨烯器件室温下氨气响应性能的影响。金属修饰使得石墨烯器件的氨气响应强度和恢复时间均有所改善,而Au/Pt双金属修饰器件的响应性能对背栅电压表现出显著的依赖性,其对200×10^(-6)NH_(3)气体的室温响应时间为54 s、响应强度为-16.2%、恢复时间为4.6 min。基于密度泛函理论计算了在施加垂直电场作用下不同器件敏感区域费米能级附近状态密度、氨气分子吸附能、吸附距离和转移电荷的变化,并讨论了上述器件响应的机制。 展开更多
关键词 石墨烯基室温气体传感器 au/pt双金属修饰 NH3检测 响应机制
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部