In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position inf...In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position information of measuring point.Utilizing very fast simulated annealing(VFSA) to fit the theoretical electromagnetic force(EMF) and measured EMF could obtain the all-time apparent resistivity of the measuring points in rectangular transmitting loop.The selective cope of initial model of VFSA could be confirmed by taking the late time apparent resistivity of transient electromagnetic method as the prior information.For verifying the correctness,the all-time apparent resistivities of the geoelectric models were calculated by VFSA and dichotomy,respectively.The results indicate that the relative differences of apparent resistivities calculated by these two methods are within 3%.The change of measuring point position has little influence on the tracing pattern of all-time apparent resistivity.The first branch of the curve of all-time apparent resistivity is close to the resistivity of the first layer medium and the last branch is close to the resistivity of the last layer medium,which proves the correctness of the arithmetics proposed.展开更多
Based on the population balance equation in a batch crystallizer characteristic of seeded precipitation, a model to calculate the rate of apparent crystal growth of aluminum hydroxide from the size distribution was de...Based on the population balance equation in a batch crystallizer characteristic of seeded precipitation, a model to calculate the rate of apparent crystal growth of aluminum hydroxide from the size distribution was deve- loped. The simulation results indicate that the rate of apparent crystal growth during seeded precipitation exhibits a manifest dependence on the crystal size. In general, there is an obvious increase in the apparent crystal growth rate with the augment in crystal size. The apparent activation energy increases with the increase of characteristic crystal size, which indicates that the growth of small crystals is controlled by surface chemical reaction; it is gradually controlled by both the surface reaction and diffusion with the augment in crystal size.展开更多
Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging f...Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging from 278.15 K to 318.15 K.The solubility in each system was found to be positively correlated with temperature.Furthermore,solubility data were analyzed using four equations:the modified Apelblat equation,Van’t Hoff equation,λh equation and CNIBS/R-K equations,and they provided satisfactory results for both two systems.The average root-mean-square deviation(105RMSD)values for these models were less than 13.93.Calculations utilizing the Van’t Hoff equation and Gibbs equations facilitated the derivation of apparent thermodynamic properties of NTO dissolution in the two systems,including values for Gibbs free energy,enthalpy and entropy.The%ζ_(H)is larger than%ζ_(TS),and all the%ζ_(H)data are≥58.63%,indicating that the enthalpy make a greater contribution than entropy to theΔG_(soln)^(Θ).展开更多
The kinetic mechanism for the preparation of silymarin from milk thistle seeds was studied during the microwave-assisted extraction （MAE） process. The results showed that the transfer rate of silymarin from milk thi...The kinetic mechanism for the preparation of silymarin from milk thistle seeds was studied during the microwave-assisted extraction （MAE） process. The results showed that the transfer rate of silymarin from milk thistle seeds increased with the microwave output power and temperature during MAE processing. The apparent extraction rate constant k （s-1） was 1.2028×10-2 , 1.2248×10-2 , and 1.2485×10-2 , and diffusion coefficient D （m2·s-1 ） was 4.21×10-10, 4.29×10-10 , and 4.37×10-10 at the microwave temperatures of 383, 393, and 403 K, respectively, in the silymarin MAE process. With the help of scanning electron microscopy （SEM）, the microstructures of the samples extracted by MAE were observed. The results revealed that the increased efficiency and rate of MAE of silymarin could be attributed mainly to the subsequent cell change resulting from superheating effects during MAE.展开更多
Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. However, these effects and the corresponding mechanisms are still controversial. In this work, we i...Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. However, these effects and the corresponding mechanisms are still controversial. In this work, we investigated the physicochemical processes during burning and the corresponding mechanisms through the technologies of structure compactness analysis on the base of voidage measurement and theoretical interfacial area estimation, apparent burning rate measurement using closed vessel(CV)and extinguished burning surface characterization relying on interrupted closed vessel(ICV) and scanning electron microscope(SEM). The results indicate that the voidage increased with the increase of RDX content and particle size due to the increasing interfacial area and increasing interface gap size,respectively. The apparent burning rate increased with the increase of RDX particle size because of the decreasing RDX specific surface area on the burning surface, which could decrease the heat absorbing rates of the melting and evaporation processes of RDX in the condensed phase. Similarly, the apparent burning rate decreased with the increase of RDX content at pressures lower than around 55 MPa due to the increasing RDX specific surface area. Whereas, an opposite trend could be observed at pressures higher than around 55 MPa, which was attributed to the increasing heat feedback from the gas phase as the result of the increasing propellant energy. For propellants containing very coarse RDX particles, such as 97.8 and 199.4 μm average size, the apparent burning rate increased stably with a flat extinguished surface at pressures lower than around 30 MPa, while increased sharply above around 30 MPa with the extinguished surface becoming more and more rugged as the pressure increased. In addition, the turning degree of u-p curve increased with the increase of coarse RDX content and particle size, and could be reduced by improving the structure compactness.展开更多
Pullout resistance of a soil nail is a critical parameter in design and analysis for geotechnical engineers. Due to the complexity of field conditions, the pullout behaviour of cement grouted soil nail in field is not...Pullout resistance of a soil nail is a critical parameter in design and analysis for geotechnical engineers. Due to the complexity of field conditions, the pullout behaviour of cement grouted soil nail in field is not well investigated. In this work, a number of field pullout tests of pressure grouted soil nails were conducted to estimate the pullout resistance of soil nails. The effective bond lengths of field soil nails were accurately controlled by a new grouting packer system. Typical field test results and the related comparison with typical laboratory test results reveal that the apparent coefficient of friction （ACF） decreases with the increase of overburden soil pressure when grouting pressure is constant, but increases almost linearly with the increase of grouting pressure when overburden pressure （soil depth） is unchanged. Water contents of soil samples at soil nail surfaces show obvious reductions compared with the results of soil samples from drillholes. After soil nails were completely pulled out of the ground, surface conditions of the soil nails and surrounding soil were examined. It is found that the water content values of the soil at the soil/nail interfaces decrease substantially compared with those of soil samples extracted from drillholes. In addition, all soil nails expand significantly in the diametrical direction after being pulled out of ground, indicating that the pressurized cement grout compacts the soil and penetrates into soil voids, leading to a corresponding shift of failure surface into surrounding soil mass significantly.展开更多
The apparent activation energy for deformation(Q)and strain rate sensitivity(m)of GH4586 superalloy are calculated and the variation trend is reasonably explained by the microstructure observations.Constitutive modell...The apparent activation energy for deformation(Q)and strain rate sensitivity(m)of GH4586 superalloy are calculated and the variation trend is reasonably explained by the microstructure observations.Constitutive modelling of this superalloy is established and the processing maps at different strains are constructed.The results show that the Q value is in the range of 751.22−878.29 kJ/mol.At a temperature of 1060°C,strain rate of 0.001 s^(−1),and strain of 0.65,the m value of GH4586 superalloy reaches a maximum of 0.42.The optimal processing parameter of GH4586 superalloy is at a deformation temperature of 1050°C and a strain rate of 0.001 s^(−1).The domains of flow instability notably expand with increasing strain during high temperature deformation of GH4586 superalloy.展开更多
Three representative sulfide ore samples were collected from typical metal mines,and their corresponding pre-oxidized products were obtained under nature environment.The thermal behaviors of each sample at heating rat...Three representative sulfide ore samples were collected from typical metal mines,and their corresponding pre-oxidized products were obtained under nature environment.The thermal behaviors of each sample at heating rates of 5,10,15 and 20 °C/min in air flow from ambient temperature to 800 °C were studied by simultaneous thermal analysis and the TG/DSC curves before and after the pre-oxidation were compared.By the peak temperature of DTG curves,the whole reaction process for each sample was divided into different stages,and the apparent activation energies were calculated by the Ozawa-Flynn-Wall method.The results show that the reaction process of each sample after pre-oxidation is more complex,with quicker reaction rates,fewer heat production quantities,and higher or lower ignition-points.The apparent activation energies decrease from 364.017-474.228 kJ/mol to 244.523- 333.161 kJ/mol.Therefore,sulfide ores are more susceptible to spontaneous combustion after the pre-oxidation.展开更多
Twelve samples with periodic array square pillars microstructure were prepared on the silicon wafer by plasma etching techniques, on which space b of the square pillars increased from 5 to 60 μm. In order to study th...Twelve samples with periodic array square pillars microstructure were prepared on the silicon wafer by plasma etching techniques, on which space b of the square pillars increased from 5 to 60 μm. In order to study the effect ofb on the wettability of the rough surface, the effects of apparent contact angle （CA） and sliding angle （a） of the droplet on the rough surface were measured with the contact angle meter. The results show that the experimental values of CA well agree with the classical wetting theory and a decreases with the increase of b. Two drop shapes exist on the samples＇ surface, corresponding to the Cassie state and the Wenzel state respectively. The contact state in which a drop would settle depends typically on the size of b. On the role of gravitation, the irreversible transition of a drop from Cassie state to Wenzel state should occur at a certain space of the square pillars. Since the transition has implications on the application of super-hydrophobic rough surfaces, theoretically, the prediction of wetting state transition on square pillar array micro-structured surfaces provides an intuitionistic guidance for the design of steady superhydrophobic surfaces.展开更多
Kinetic parameters of the electrode reactions were measured by investigating steady-state current-potential behaviors. The Tafel slopes of cathodic and anodic processes are -0.113 8 V and -0.041 18 V, the anodic and c...Kinetic parameters of the electrode reactions were measured by investigating steady-state current-potential behaviors. The Tafel slopes of cathodic and anodic processes are -0.113 8 V and -0.041 18 V, the anodic and cathodic apparent transfer coefficients are 0.519 3 and 1.435 2, respectively, and the stoichiometric number of rate-deterrnining step is 1. The theoretical kinetics equation of electrode reaction was deduced, from which the dynamic parameters can be calculated as follows： the cathodic and anodic Tafel slopes are -0.118 V and -0.039 4 V, respectively, consisting with the experimental values, Finally, the correctness of the mechanism was further demonstrated using apparent transfer coefficient according to the electrochemical dynamic equation of multi-electron reaction.展开更多
Many of the physical and functional properties of RDX and HMX explosives are related to the crystalline structure of these materials. Crystalline defects affect the quality of the explosives. Therefore, in order to en...Many of the physical and functional properties of RDX and HMX explosives are related to the crystalline structure of these materials. Crystalline defects affect the quality of the explosives. Therefore, in order to enhance the quality of these materials, it is necessary to form crystals with the lowest defects. In this research, we report the optimization of recrystallization process of RDX and HMX by statistical techniques. The solvent/anti-solvent procedure was used for recrystallization of HMX and RDX particles. The four parameters of i) ratio of anti-solvent to solvent, ii) ratio of solute to solvent, iii) aging time, and iv)cooling rate of mixture, were optimized by Taguchi analysis design. Taguchi L16 orthogonal array was used with sixteen rows corresponding to the number of tests in four columns at four levels. The apparent density of recrystallized of RDX and HMX particles was considered as the quality characteristic with the concept of "the larger-the-better". The obtained graphs showed that the studied parameters were optimized in ratio 1:1 for anti-solvent to solvent, ratio 0.1 g,m L^(-1) for solute to solvent, aging time of 2 h and cooling rate of 1℃,min^(-1). Also, the correlation between the investigated parameters and apparent density of crystals were studied by multiple linear regressions(MLR) method for obtaining a model of prediction of apparent density. The P-values were indicated that in confidence level of 95%, the null hypothesis is rejected and a meaningful addition is observed in the proposed model.展开更多
It is important and profound to quantitatively study the relation between rheology and microstructure for development of the microstructural mechanism of crude oil rheology and even for the waxy crude oil pipelining.H...It is important and profound to quantitatively study the relation between rheology and microstructure for development of the microstructural mechanism of crude oil rheology and even for the waxy crude oil pipelining.However,due to the high complexity and irregularity of wax crystal morphology,quantitative characterization is hard to achieve.This has hampered further study on the rheology-microstructure relationship.A new approach combined the fractal geometry and the stereology theory is presented for quantifying the intricate wax crystal morphology and structure.Based on the characterization,the effects of microstructures and oil composition on the waxy crude viscosities are analyzed quantitatively.It further validates the previous qualitative research and enriches understanding into the microstructural mechanism of waxy crude oil rheology.展开更多
Rheological properties of microemulsions(MEs) and their printability in three dimensional printing(3DP) systems were investigated.A series of MEs with different contents of oil phase were prepared using sonication met...Rheological properties of microemulsions(MEs) and their printability in three dimensional printing(3DP) systems were investigated.A series of MEs with different contents of oil phase were prepared using sonication method with ibuprofen as model drug and soybean lecithin as emulfier.Stationary and transient rheological properties of MEs were investigated by ARES-SRF using concentric cylinders measuring systems.3DP systems with piezoelectric drop-on-demand print heads were employed to test the printability of the MEs.Results demonstrate that the apparent viscosity and dynamic linear viscoelastic regions of the MEs are the most important parameters for continuous and stable printing of MEs by 3DP.The incorporation of drug in the MEs has little influence on the MEs' stationary rheological behaviors and dynamic viscoelasticity,but the concentration of oil phase has a strong influence on them.The rheological property of binder liquids has a close relationship with their printability in 3DP system.展开更多
In order to investigate the possible relationshipbetween the transfection of IL-2 gene and the changes intumor cells biological characteristics, we used retroviralvector to transduce human mammary carcinoma MCF-7cell ...In order to investigate the possible relationshipbetween the transfection of IL-2 gene and the changes intumor cells biological characteristics, we used retroviralvector to transduce human mammary carcinoma MCF-7cell line with the IL-2 cDNA and explored the changes incell membrane components and function. The genemodified cells releasing 70 - 169 U/106 cells of IL-2 in 24hrs. showed apparent morphological conversion includingthe appearance change from epitheloid form展开更多
The control and prevention of pasteurellosis in rabbits which makes the hosts unsuitable for experimental use raised the needs to improve and simplify the procedures of Enzyme-Linked Immunosorbent Assay (ELISA) for de...The control and prevention of pasteurellosis in rabbits which makes the hosts unsuitable for experimental use raised the needs to improve and simplify the procedures of Enzyme-Linked Immunosorbent Assay (ELISA) for detect of antibody against P.multocida. A comparison on the sensitivity and specificity of bacterial culture of antemortem and postmortem samples, complement fixation test and enzyme-linked immunosorbent assay of 11 apparently healthy adult rabbits was conducted. The incidence rates showed 45.45%,54.54% and 72.73% respectively. The sensitivity for the three methods were 0.63, 0.67,and 1.00,and specificity for them were 1.00, 0.67 and 1.00 respectively. Somatic serotypes of isolates of P.multocida from rabbits of three groups (rabbits of group 2 were with clinic signs, those of groups 1 and 3 were apparently healthy) revealed no remarkable differences,and the predominant types were type 3 and type 3, 4. This was somewhat different from the reports derived from other states. As the antigen of different serotype used in ELISA may have different sensitivity and specificity, which is affected also by different preparation method, a type non-specific antigen should be selected to meet such request. The trial of accomplishment of ELISA without positive and negative controls was presented for discussion.展开更多
The effects of polyurethane sponge pretreatment and slurry compositions on the slurry loading in precursor were discussed,and the performances of stainless steel foams prepared from precursors with different slurry lo...The effects of polyurethane sponge pretreatment and slurry compositions on the slurry loading in precursor were discussed,and the performances of stainless steel foams prepared from precursors with different slurry loadings and different particle sizes of the stainless steel powder were also investigated.The experimental results show that the pretreatment of sponge with alkaline solution is effective to reduce the jam of cells in precursor and ensure the slurry to uniformly distribute in sponge,and it is also an effective method for increasing the slurry loading in precursor;the mass fraction of additive A and solid content in slurry greatly affect the slurry loading in precursor,when they are kept in 9%-13% and 52%-75%,respectively,the stainless steel foam may hold excellent 3D open-cell network structure and uniform muscles;the particle size of the stainless steel powder and the slurry loading in precursor have great effects on the bending strength,apparent density and open porosity of stainless steel foam;when the stainless steel powder with particle size of 44 μm and slurry loading of 0.5 g/cm3 in precursor are used,a stainless steel foam can be obtained,which has open porosity of 81.2%,bending strength of about 51.76 MPa and apparent density of about 1.0 g/cm3.展开更多
There are several web sites for whichinformation is available to the cotton researchcommunity.Most of these sites relate toresources developed or available to the researchcommunity.Few provide bioinformatic tools,whic...There are several web sites for whichinformation is available to the cotton researchcommunity.Most of these sites relate toresources developed or available to the researchcommunity.Few provide bioinformatic tools,which usually relate to the specific data sets andmaterials presented in the database.Just as thebioinformatics area is evolving,the展开更多
基金Projects(40804027,41074085) supported by the National Natural Science Foundation of ChinaProject(09JJ3048) supported by the Natural Science Foundation of Hunan Province,ChinaProject(200805331082) supported by the Research Fund for the Doctoral Program of Higher Education,China
文摘In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position information of measuring point.Utilizing very fast simulated annealing(VFSA) to fit the theoretical electromagnetic force(EMF) and measured EMF could obtain the all-time apparent resistivity of the measuring points in rectangular transmitting loop.The selective cope of initial model of VFSA could be confirmed by taking the late time apparent resistivity of transient electromagnetic method as the prior information.For verifying the correctness,the all-time apparent resistivities of the geoelectric models were calculated by VFSA and dichotomy,respectively.The results indicate that the relative differences of apparent resistivities calculated by these two methods are within 3%.The change of measuring point position has little influence on the tracing pattern of all-time apparent resistivity.The first branch of the curve of all-time apparent resistivity is close to the resistivity of the first layer medium and the last branch is close to the resistivity of the last layer medium,which proves the correctness of the arithmetics proposed.
文摘Based on the population balance equation in a batch crystallizer characteristic of seeded precipitation, a model to calculate the rate of apparent crystal growth of aluminum hydroxide from the size distribution was deve- loped. The simulation results indicate that the rate of apparent crystal growth during seeded precipitation exhibits a manifest dependence on the crystal size. In general, there is an obvious increase in the apparent crystal growth rate with the augment in crystal size. The apparent activation energy increases with the increase of characteristic crystal size, which indicates that the growth of small crystals is controlled by surface chemical reaction; it is gradually controlled by both the surface reaction and diffusion with the augment in crystal size.
文摘Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging from 278.15 K to 318.15 K.The solubility in each system was found to be positively correlated with temperature.Furthermore,solubility data were analyzed using four equations:the modified Apelblat equation,Van’t Hoff equation,λh equation and CNIBS/R-K equations,and they provided satisfactory results for both two systems.The average root-mean-square deviation(105RMSD)values for these models were less than 13.93.Calculations utilizing the Van’t Hoff equation and Gibbs equations facilitated the derivation of apparent thermodynamic properties of NTO dissolution in the two systems,including values for Gibbs free energy,enthalpy and entropy.The%ζ_(H)is larger than%ζ_(TS),and all the%ζ_(H)data are≥58.63%,indicating that the enthalpy make a greater contribution than entropy to theΔG_(soln)^(Θ).
基金Supported by the National Natural Science Foundation of China(31071579)the Key Program of the Natural Science Foundation of Heilongjiang Province of China(ZD201013)the Key Project of Education Department of Heilongjiang Province of China(125212003)
文摘The kinetic mechanism for the preparation of silymarin from milk thistle seeds was studied during the microwave-assisted extraction （MAE） process. The results showed that the transfer rate of silymarin from milk thistle seeds increased with the microwave output power and temperature during MAE processing. The apparent extraction rate constant k （s-1） was 1.2028×10-2 , 1.2248×10-2 , and 1.2485×10-2 , and diffusion coefficient D （m2·s-1 ） was 4.21×10-10, 4.29×10-10 , and 4.37×10-10 at the microwave temperatures of 383, 393, and 403 K, respectively, in the silymarin MAE process. With the help of scanning electron microscopy （SEM）, the microstructures of the samples extracted by MAE were observed. The results revealed that the increased efficiency and rate of MAE of silymarin could be attributed mainly to the subsequent cell change resulting from superheating effects during MAE.
基金the support of Key Laboratory of Special Energy Materials,Ministry of Education,Nanjing,210094,China.
文摘Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. However, these effects and the corresponding mechanisms are still controversial. In this work, we investigated the physicochemical processes during burning and the corresponding mechanisms through the technologies of structure compactness analysis on the base of voidage measurement and theoretical interfacial area estimation, apparent burning rate measurement using closed vessel(CV)and extinguished burning surface characterization relying on interrupted closed vessel(ICV) and scanning electron microscope(SEM). The results indicate that the voidage increased with the increase of RDX content and particle size due to the increasing interfacial area and increasing interface gap size,respectively. The apparent burning rate increased with the increase of RDX particle size because of the decreasing RDX specific surface area on the burning surface, which could decrease the heat absorbing rates of the melting and evaporation processes of RDX in the condensed phase. Similarly, the apparent burning rate decreased with the increase of RDX content at pressures lower than around 55 MPa due to the increasing RDX specific surface area. Whereas, an opposite trend could be observed at pressures higher than around 55 MPa, which was attributed to the increasing heat feedback from the gas phase as the result of the increasing propellant energy. For propellants containing very coarse RDX particles, such as 97.8 and 199.4 μm average size, the apparent burning rate increased stably with a flat extinguished surface at pressures lower than around 30 MPa, while increased sharply above around 30 MPa with the extinguished surface becoming more and more rugged as the pressure increased. In addition, the turning degree of u-p curve increased with the increase of coarse RDX content and particle size, and could be reduced by improving the structure compactness.
基金Foundation item： Project（NTF 12015） supported by the Scientific Research Foundation for Talent of Shantou University, China Project（PolyU 5320107E） supported by the Research Grants Committee General Research Fund, China
文摘Pullout resistance of a soil nail is a critical parameter in design and analysis for geotechnical engineers. Due to the complexity of field conditions, the pullout behaviour of cement grouted soil nail in field is not well investigated. In this work, a number of field pullout tests of pressure grouted soil nails were conducted to estimate the pullout resistance of soil nails. The effective bond lengths of field soil nails were accurately controlled by a new grouting packer system. Typical field test results and the related comparison with typical laboratory test results reveal that the apparent coefficient of friction （ACF） decreases with the increase of overburden soil pressure when grouting pressure is constant, but increases almost linearly with the increase of grouting pressure when overburden pressure （soil depth） is unchanged. Water contents of soil samples at soil nail surfaces show obvious reductions compared with the results of soil samples from drillholes. After soil nails were completely pulled out of the ground, surface conditions of the soil nails and surrounding soil were examined. It is found that the water content values of the soil at the soil/nail interfaces decrease substantially compared with those of soil samples extracted from drillholes. In addition, all soil nails expand significantly in the diametrical direction after being pulled out of ground, indicating that the pressurized cement grout compacts the soil and penetrates into soil voids, leading to a corresponding shift of failure surface into surrounding soil mass significantly.
基金Project(2020JC-17)supported by the Science Fund for Distinguished Young Scholars from Shaanxi Province,ChinaProject(51705425)+4 种基金supported by the National Natural Science Foundation of ChinaProject(2019-QZ-04)supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),ChinaProjects(3102019PY007,3102019MS0403)supported by the Fundamental Research Funds for the Central Universities,China。
文摘The apparent activation energy for deformation(Q)and strain rate sensitivity(m)of GH4586 superalloy are calculated and the variation trend is reasonably explained by the microstructure observations.Constitutive modelling of this superalloy is established and the processing maps at different strains are constructed.The results show that the Q value is in the range of 751.22−878.29 kJ/mol.At a temperature of 1060°C,strain rate of 0.001 s^(−1),and strain of 0.65,the m value of GH4586 superalloy reaches a maximum of 0.42.The optimal processing parameter of GH4586 superalloy is at a deformation temperature of 1050°C and a strain rate of 0.001 s^(−1).The domains of flow instability notably expand with increasing strain during high temperature deformation of GH4586 superalloy.
基金Project(51304051)supported by the National Natural Science Foundation of ChinaProject(2012J05088)supported by the Natural Science Foundation of Fujian Province,China+1 种基金Project(022409)supported by School Talent Award of Fuzhou University,ChinaProject(2013-XQ-18)supported by Science&Technology Development Foundation of Fuzhou University,China
文摘Three representative sulfide ore samples were collected from typical metal mines,and their corresponding pre-oxidized products were obtained under nature environment.The thermal behaviors of each sample at heating rates of 5,10,15 and 20 °C/min in air flow from ambient temperature to 800 °C were studied by simultaneous thermal analysis and the TG/DSC curves before and after the pre-oxidation were compared.By the peak temperature of DTG curves,the whole reaction process for each sample was divided into different stages,and the apparent activation energies were calculated by the Ozawa-Flynn-Wall method.The results show that the reaction process of each sample after pre-oxidation is more complex,with quicker reaction rates,fewer heat production quantities,and higher or lower ignition-points.The apparent activation energies decrease from 364.017-474.228 kJ/mol to 244.523- 333.161 kJ/mol.Therefore,sulfide ores are more susceptible to spontaneous combustion after the pre-oxidation.
基金Project(50435030) supported by the National Natural Science foundation of ChinaProject supported by the Program for New Century Excellent Talents in Chinese University Project(GZ080010) supported by the Open Research Fund Program of Jiangsu Province Key Laboratory for Photon Manufacturing Science and Technology
文摘Twelve samples with periodic array square pillars microstructure were prepared on the silicon wafer by plasma etching techniques, on which space b of the square pillars increased from 5 to 60 μm. In order to study the effect ofb on the wettability of the rough surface, the effects of apparent contact angle （CA） and sliding angle （a） of the droplet on the rough surface were measured with the contact angle meter. The results show that the experimental values of CA well agree with the classical wetting theory and a decreases with the increase of b. Two drop shapes exist on the samples＇ surface, corresponding to the Cassie state and the Wenzel state respectively. The contact state in which a drop would settle depends typically on the size of b. On the role of gravitation, the irreversible transition of a drop from Cassie state to Wenzel state should occur at a certain space of the square pillars. Since the transition has implications on the application of super-hydrophobic rough surfaces, theoretically, the prediction of wetting state transition on square pillar array micro-structured surfaces provides an intuitionistic guidance for the design of steady superhydrophobic surfaces.
文摘Kinetic parameters of the electrode reactions were measured by investigating steady-state current-potential behaviors. The Tafel slopes of cathodic and anodic processes are -0.113 8 V and -0.041 18 V, the anodic and cathodic apparent transfer coefficients are 0.519 3 and 1.435 2, respectively, and the stoichiometric number of rate-deterrnining step is 1. The theoretical kinetics equation of electrode reaction was deduced, from which the dynamic parameters can be calculated as follows： the cathodic and anodic Tafel slopes are -0.118 V and -0.039 4 V, respectively, consisting with the experimental values, Finally, the correctness of the mechanism was further demonstrated using apparent transfer coefficient according to the electrochemical dynamic equation of multi-electron reaction.
文摘Many of the physical and functional properties of RDX and HMX explosives are related to the crystalline structure of these materials. Crystalline defects affect the quality of the explosives. Therefore, in order to enhance the quality of these materials, it is necessary to form crystals with the lowest defects. In this research, we report the optimization of recrystallization process of RDX and HMX by statistical techniques. The solvent/anti-solvent procedure was used for recrystallization of HMX and RDX particles. The four parameters of i) ratio of anti-solvent to solvent, ii) ratio of solute to solvent, iii) aging time, and iv)cooling rate of mixture, were optimized by Taguchi analysis design. Taguchi L16 orthogonal array was used with sixteen rows corresponding to the number of tests in four columns at four levels. The apparent density of recrystallized of RDX and HMX particles was considered as the quality characteristic with the concept of "the larger-the-better". The obtained graphs showed that the studied parameters were optimized in ratio 1:1 for anti-solvent to solvent, ratio 0.1 g,m L^(-1) for solute to solvent, aging time of 2 h and cooling rate of 1℃,min^(-1). Also, the correlation between the investigated parameters and apparent density of crystals were studied by multiple linear regressions(MLR) method for obtaining a model of prediction of apparent density. The P-values were indicated that in confidence level of 95%, the null hypothesis is rejected and a meaningful addition is observed in the proposed model.
文摘It is important and profound to quantitatively study the relation between rheology and microstructure for development of the microstructural mechanism of crude oil rheology and even for the waxy crude oil pipelining.However,due to the high complexity and irregularity of wax crystal morphology,quantitative characterization is hard to achieve.This has hampered further study on the rheology-microstructure relationship.A new approach combined the fractal geometry and the stereology theory is presented for quantifying the intricate wax crystal morphology and structure.Based on the characterization,the effects of microstructures and oil composition on the waxy crude viscosities are analyzed quantitatively.It further validates the previous qualitative research and enriches understanding into the microstructural mechanism of waxy crude oil rheology.
基金Project(B07024) supported by Biomedical Textile Materials "111 Project" from Ministry of Education of ChinaProject(50773009) supported by the National Natural Science Foundation of ChinaProject(Grant IRT0526) supported by Program for Changjiang Scholars and Innovative Research Team in University
文摘Rheological properties of microemulsions(MEs) and their printability in three dimensional printing(3DP) systems were investigated.A series of MEs with different contents of oil phase were prepared using sonication method with ibuprofen as model drug and soybean lecithin as emulfier.Stationary and transient rheological properties of MEs were investigated by ARES-SRF using concentric cylinders measuring systems.3DP systems with piezoelectric drop-on-demand print heads were employed to test the printability of the MEs.Results demonstrate that the apparent viscosity and dynamic linear viscoelastic regions of the MEs are the most important parameters for continuous and stable printing of MEs by 3DP.The incorporation of drug in the MEs has little influence on the MEs' stationary rheological behaviors and dynamic viscoelasticity,but the concentration of oil phase has a strong influence on them.The rheological property of binder liquids has a close relationship with their printability in 3DP system.
文摘In order to investigate the possible relationshipbetween the transfection of IL-2 gene and the changes intumor cells biological characteristics, we used retroviralvector to transduce human mammary carcinoma MCF-7cell line with the IL-2 cDNA and explored the changes incell membrane components and function. The genemodified cells releasing 70 - 169 U/106 cells of IL-2 in 24hrs. showed apparent morphological conversion includingthe appearance change from epitheloid form
文摘The control and prevention of pasteurellosis in rabbits which makes the hosts unsuitable for experimental use raised the needs to improve and simplify the procedures of Enzyme-Linked Immunosorbent Assay (ELISA) for detect of antibody against P.multocida. A comparison on the sensitivity and specificity of bacterial culture of antemortem and postmortem samples, complement fixation test and enzyme-linked immunosorbent assay of 11 apparently healthy adult rabbits was conducted. The incidence rates showed 45.45%,54.54% and 72.73% respectively. The sensitivity for the three methods were 0.63, 0.67,and 1.00,and specificity for them were 1.00, 0.67 and 1.00 respectively. Somatic serotypes of isolates of P.multocida from rabbits of three groups (rabbits of group 2 were with clinic signs, those of groups 1 and 3 were apparently healthy) revealed no remarkable differences,and the predominant types were type 3 and type 3, 4. This was somewhat different from the reports derived from other states. As the antigen of different serotype used in ELISA may have different sensitivity and specificity, which is affected also by different preparation method, a type non-specific antigen should be selected to meet such request. The trial of accomplishment of ELISA without positive and negative controls was presented for discussion.
基金Project(06SK2011) supported by the Science and Technology Program of Hunan Province,China
文摘The effects of polyurethane sponge pretreatment and slurry compositions on the slurry loading in precursor were discussed,and the performances of stainless steel foams prepared from precursors with different slurry loadings and different particle sizes of the stainless steel powder were also investigated.The experimental results show that the pretreatment of sponge with alkaline solution is effective to reduce the jam of cells in precursor and ensure the slurry to uniformly distribute in sponge,and it is also an effective method for increasing the slurry loading in precursor;the mass fraction of additive A and solid content in slurry greatly affect the slurry loading in precursor,when they are kept in 9%-13% and 52%-75%,respectively,the stainless steel foam may hold excellent 3D open-cell network structure and uniform muscles;the particle size of the stainless steel powder and the slurry loading in precursor have great effects on the bending strength,apparent density and open porosity of stainless steel foam;when the stainless steel powder with particle size of 44 μm and slurry loading of 0.5 g/cm3 in precursor are used,a stainless steel foam can be obtained,which has open porosity of 81.2%,bending strength of about 51.76 MPa and apparent density of about 1.0 g/cm3.
文摘There are several web sites for whichinformation is available to the cotton researchcommunity.Most of these sites relate toresources developed or available to the researchcommunity.Few provide bioinformatic tools,which usually relate to the specific data sets andmaterials presented in the database.Just as thebioinformatics area is evolving,the
