In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are c...In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are closely related to the hydrogen bonds(H-bonds)network between water molecules.Therefore,it is crucial to analyze the relationship between these two aspects.In this paper,the infrared spectrum and motion characteristics of the stretching vibrations of the O-H bonds in one-dimensional confined water(1DCW)and bulk water(BW)in(6,6)single-walled carbon nanotubes(SWNT)are studied by molecular dynamics simulations.The results show that the stretching vibrations of the two O-H bonds in 1DCW exhibit different frequencies in the infrared spectrum,while the O-H bonds in BW display two identical main frequency peaks.Further analysis using the spring oscillator model reveals that the difference in the stretching amplitude of the O-H bonds is the main factor causing the change in vibration frequency,where an increase in stretching amplitude leads to a decrease in spring stiffness and,consequently,a lower vibration frequency.A more in-depth study found that the interaction of H-bonds between water molecules is the fundamental cause of the increased stretching amplitude and decreased vibration frequency of the O-H bonds.Finally,by analyzing the motion trajectory of the H atoms,the dynamic differences between 1DCW and BW are clearly revealed.These findings provide a new perspective for understanding the behavior of water molecules at the nanoscale and are of significant importance in advancing the development of infrared spectroscopy detection technology.展开更多
Although there are numerous optical spectroscopy techniques and methods that have been used to extract the fundamental bandgap of a semiconductor,most of them belong to one of these three approaches:(1)the excitonic a...Although there are numerous optical spectroscopy techniques and methods that have been used to extract the fundamental bandgap of a semiconductor,most of them belong to one of these three approaches:(1)the excitonic absorption,(2)modulation spectroscopy,and(3)the most widely used Tauc-plot.The excitonic absorption is based on a many-particle theory,which is physically the most correct approach,but requires more stringent crystalline quality and appropriate sample preparation and experimental implementation.The Tauc-plot is based on a single-particle theo⁃ry that neglects the many-electron effects.Modulation spectroscopy analyzes the spectroscopy features in the derivative spectrum,typically,of the reflectance and transmission under an external perturbation.Empirically,the bandgap ener⁃gy derived from the three approaches follow the order of E_(ex)>E_(MS)>E_(TP),where three transition energies are from exci⁃tonic absorption,modulation spectroscopy,and Tauc-plot,respectively.In principle,defining E_(g) as the single-elec⁃tron bandgap,we expect E_(g)>E_(ex),thus,E_(g)>E_(TP).In the literature,E_(TP) is often interpreted as E_(g),which is conceptual⁃ly problematic.However,in many cases,because the excitonic peaks are not readily identifiable,the inconsistency be⁃tween E_(g) and E_(TP) becomes invisible.In this brief review,real world examples are used(1)to illustrate how excitonic absorption features depend sensitively on the sample and measurement conditions;(2)to demonstrate the differences between E_(ex),E_(MS),and E_(TP) when they can be extracted simultaneously for one sample;and(3)to show how the popular⁃ly adopted Tauc-plot could lead to misleading results.Finally,it is pointed out that if the excitonic absorption is not ob⁃servable,the modulation spectroscopy can often yield a more useful and reasonable bandgap than Tauc-plot.展开更多
To address the issues of peak overlap caused by complex matrices in agricultural product terahertz(THz)spectral signals and the dynamic,nonlinear interference induced by environmental and system noise,this study explo...To address the issues of peak overlap caused by complex matrices in agricultural product terahertz(THz)spectral signals and the dynamic,nonlinear interference induced by environmental and system noise,this study explores the feasibility of adaptive-signal-decomposition-based denoising methods to improve THz spectral quality.THz time-domain spectroscopy(THz-TDS)combined with an attenuated total reflection(ATR)accessory was used to collect THz absorbance spectra from 48 peanut samples.Taking the quantitative prediction model of peanut moisture content based on THz-ATR as an example,wavelet transform(WT),empirical mode decomposition(EMD),local mean decomposition(LMD),and its improved methods-segmented local mean decomposition(SLMD)and piecewise mirror extension local mean decomposition(PME-LMD)-were employed for spectral denoising.The applicability of different denoising methods was evaluated using a support vector regression(SVR)model.Experimental results show that the peanut moisture content prediction model constructed after PME-LMD denoising achieved the best performance,with a root mean square error(RMSE),coefficient of determination(R^(2)),and mean absolute percentage error(MAPE)of 0.010,0.912,and 0.040,respectively.Compared with traditional methods,PME-LMD significantly improved spectral quality and model prediction performance.The PME-LMD denoising strategy proposed in this study effectively suppresses non-uniform noise interference in THz spectral signals,providing an efficient and accurate preprocessing method for THz spectral analysis of agricultural products.This research provides theoretical support and technical guidance for the application of THz technology for detecting agricultural product quality.展开更多
3-Nitro-1,2,4-triazol-5-one(NTO)is a typical high-energy,low-sensitivity explosive,and accurate concentration monitoring is critical for crystallization process control.In this study,a high-precision quantitative anal...3-Nitro-1,2,4-triazol-5-one(NTO)is a typical high-energy,low-sensitivity explosive,and accurate concentration monitoring is critical for crystallization process control.In this study,a high-precision quantitative analytical model for NTO concentration in ethanol solutions was developed by integrating real-time ATR-FTIR spectroscopy with chemometric and machine learning techniques.Dynamic spectral data were obtained by designing multi-concentration gradient heating-cooling cycle experiments,abnormal samples were eliminated using the isolation forest algorithm,and the effects of various preprocessing methods on model performance were systematically evaluated.The results show that partial least squares regression(PLSR)exhibits superior generalization ability compared to other models.Vibrational bands corresponding to C=O and–NO_(2)were identified as key predictors for concentration estimation.This work provides an efficient and reliable solution for real-time concentration monitoring during NTO crystallization and holds significant potential for process analytical applications in energetic material manufacturing.展开更多
Based on three different kinds of conductive paths in microstructure of soil and theory of electrochemical impedance spectroscopy(EIS), an integrated equivalent circuit model and impedance formula for soils were propo...Based on three different kinds of conductive paths in microstructure of soil and theory of electrochemical impedance spectroscopy(EIS), an integrated equivalent circuit model and impedance formula for soils were proposed, which contain 6 meaningful resistance and reactance parameters. Considering the conductive properties of soils and dispersion effects, mathematical equations for impedance under various circuit models were deduced and studied. The mathematical expression presents two semicircles for theoretical EIS Nyquist spectrum, in which the center of one semicircle is degraded to simply the equivalent model. Based on the measured parameters of EIS Nyquist spectrum, meaningful soil parameters can easily be determined. Additionally, EIS was used to investigate the soil properties with different water contents along with the mathematical relationships and mechanism between the physical parameters and water content. Magnitude of the impedance decreases with the increase of testing frequency and water content for Bode graphs. The proposed model would help us to better understand the soil microstructure and properties and offer more reasonable explanations for EIS spectra.展开更多
Parent compounds of cyclopentadienyltitanium substituted heteropolytungstates with Keggin structure,An[(CpTi)XW11O39]·xH2O(A=Me4N,K;X=P,Si,Co;Cp=η5-C5H5) were synthesized in aqueous phase.By allowing parent hete...Parent compounds of cyclopentadienyltitanium substituted heteropolytungstates with Keggin structure,An[(CpTi)XW11O39]·xH2O(A=Me4N,K;X=P,Si,Co;Cp=η5-C5H5) were synthesized in aqueous phase.By allowing parent heteropoly compounds to react with protonated 8-quinolinol,the title supermolecular compounds(C9H8NO)mAn[(CpTi)XW11O39]·xH2O(A=Me4N,H;X=P,Si,Co) were synthesized.The title compounds were characterized by means of elementary analysis,IR,UV,1H NMR,XRD and TG-DSC.The results indicate that the title compounds are new heteropoly compounds,and there is a charge transfer interaction between the organic cation and heteropoly anion.The results obtained from thermal analysis show that QCpTiPW,QCpTiSiW and QCpTiCoW begin to decompose at 212.4,194.2 and 171.2 ℃,respectively.The results obtained from antibacterial test reveal that QCpTiSiW has the best antibacterial activity,and the MIC values of QCpTiSiW against Escherichia coli and Staphylococcus aurous are 64.0 and 0.500 μg·mL-1,respectively.展开更多
Near infrared spectrometer technology under a wavelength range of 918-1045 nm was used to rapidly detect paddy rice that was stored at 5℃, 15℃ and 25℃. A total of 121 paddy rice samples were collected from artifici...Near infrared spectrometer technology under a wavelength range of 918-1045 nm was used to rapidly detect paddy rice that was stored at 5℃, 15℃ and 25℃. A total of 121 paddy rice samples were collected from artificial infection with moulds to build the calibration models to calculate the total number colony of moulds based on the principal component regression method and multiple linear regression method. The results of statistical analysis indicated that multiple linear regression method was applicable to the detection of the total number colony of moulds. The correlation of calibration data set was 0.943. The correlation of prediction data set was 0.897. Therefore, the result showed that near infrared spectroscopy could be a useful instrumental method for determining the total number colony of moulds in paddy rice. The near infrared spectroscopy methodology could be applied for monitoring mould contamination in postharvest paddy rice during storage and might become a powerful tool for monitoring the safety of the grain.展开更多
There is need to determination of uranium concentration at ppb level in environmental matrices.Due to low sensitivity of FAAS,UV-Visible Spectroscopy is generally used as measurement technique.In this study,ion-imprin...There is need to determination of uranium concentration at ppb level in environmental matrices.Due to low sensitivity of FAAS,UV-Visible Spectroscopy is generally used as measurement technique.In this study,ion-imprinted polymers(IIP)were prepared for uranyl ion(imprint ion)by formation of ternary(salicylaldoxime and 4-vinylpyridine)complex in 2-methoxy ethanol(porogen)following copolymerization with methacrylic acid(MAA)as a functional monomer and ethylene glycol dimethacrylate(EGDMA)as crosslinking monomer using 2,2-azobisisobutyronitrile as initiator.The synthesized polymers were characterized by FTIR and TGA analysis.ArsenazoⅢin 3M HClO_4 was used as complexing agent in the measurement step.The optimal pH for preconcentration was found to be between 3.5~6.5values.The developed method was applied to uranium(Ⅵ)determination in natural water samples.展开更多
In this study,aluminum flame analysis was researched in order to develop a measurement method for high-energy-density metal aluminum dust cloud combustion,and the flame temperature and UV-VIS-IR emission spectra were ...In this study,aluminum flame analysis was researched in order to develop a measurement method for high-energy-density metal aluminum dust cloud combustion,and the flame temperature and UV-VIS-IR emission spectra were precisely measured using a spectrometer.Because the micron-sized aluminum flame temperature was higher than 2 400 K,Flame temperature was measured by a non-contact optical technique,namely,a modified two-color method using 520 and 640nm light,as well as by apolychromatic fitting method.These methods were applied experimentally after accurate calibration.The flame temperature was identified to be higher than 2 400 Kusing both methods.By analyzing the emission spectra,we could identify AlO radicals,which occur dominantly in aluminum combustion.This study paves the way for realization of a measurement technique for aluminum dust cloud combustion flames,and it will be applied in the aluminum combustors that are in development for military purposes.展开更多
The UV-Vis and infrared(IR)absorption spectra of organophosphorus(OP)pesticides have been studied.A correlation in spectra was developed to optimize the OP pesticides in the environments.The spectroscopic(UV-Vis and I...The UV-Vis and infrared(IR)absorption spectra of organophosphorus(OP)pesticides have been studied.A correlation in spectra was developed to optimize the OP pesticides in the environments.The spectroscopic(UV-Vis and IR)spectrum of OP pesticides like methyl parathion,malathion and parathion has been interpreted in detail.A complete calculation of the normal frequencies and absolute intensities of UV-Vis and IR absorption bands are interpreted with the help of corresponding experimental data.In the colorimetric reactions,the bands appear at 2 077,1 637,1 455,1 015,655cm^(-1) for malathion;2 081,1 639,1 316,1 015,794,683cm^(-1) for parathion;2 078,1 632,1 032,794cm^(-1) for methyl parathion were used for quantitative or qualitative analysis.All these IR spectra were acquired by averaging 100 scans at a resolution of 4cm^(-1).It is determined experimentally in the region 200~450nm for UV-Vis absorption bands and in the region 400~4 000cm^(-1) for IR absorption bands.It is concluded that the mainly optically active groups(P—OH, C=O,P=O, C—O—C,P—O—C, P=S, —OH)present in pesticides which are responsible in change in significant data for quantitative and qualitative analysis.The various optical properties like wavelength,band energy,wave number,and frequency,also are calculated.展开更多
Laser induced breakdown Spectroscopy(LIBS)was applied for the elemental analysis and exposure of the heavy metals in betel leaves in air.Pulsed Nd∶YAG(1064 nm)in conjunction with a suitable detector(LIBS 2000+,Ocean ...Laser induced breakdown Spectroscopy(LIBS)was applied for the elemental analysis and exposure of the heavy metals in betel leaves in air.Pulsed Nd∶YAG(1064 nm)in conjunction with a suitable detector(LIBS 2000+,Ocean Optics,Inc)having the optical resolution of 0.06 nm was used to record the emission spectra from 220 to 720 nm.Elements like Al,Ba,Ca,Cr,Cu,P,Fe,K,Mg,Mn,Na,P,S,Sr,and Zn were found to present in the samples.The relative abundances of the observed elements were calculated through standard calibration curve method,integrated intensity ratio method,and weight percentage LIBS approach.LIBS findings were validated by comparing its results with the results obtained using a typical analytical technique of Inductively Coupled plasma-optical emission spectroscopy(ICP-OES).Limit of detection(LOD)of the LIBS system was also estimated for heavy metals.The experience gain through this work implies that LIBS could be highly applicable for testing the quality and purity of food products.展开更多
Background:Gossypol found in cottonseeds is toxic to human beings and monogastric animals and is a primary parameter for the integrated utilization of cottonseed products.It is usually determined by the techniques rel...Background:Gossypol found in cottonseeds is toxic to human beings and monogastric animals and is a primary parameter for the integrated utilization of cottonseed products.It is usually determined by the techniques relied on complex pretreatment procedures and the samples after determination cannot be used in the breeding program,so it is of great importance to predict the gossypol content in cottonseeds rapidly and nondestructively to substitute the traditional analytical method.Results:Gossypol content in cottonseeds was investigated by near-infrared spectroscopy(NIRS)and high-performance liquid chromatography(HPLC).Partial least squares regression,combined with spectral pretreatment methods including Savitzky-Golay smoothing,standard normal variate,multiplicative scatter correction,and first derivate were tested for optimizing the calibration models.NIRS technique was efficient in predicting gossypol content in intact cottonseeds,as revealed by the root-mean-square error of cross-validation(RMSECV),root-mean-square error of prediction(RMSEP),coefficient for determination of prediction(R_(p)^(2)),and residual predictive deviation(RPD)values for all models,being 0.05∼0.07,0.04∼0.06,0.82∼0.92,and 2.3∼3.4,respectively.The optimized model pretreated by Savitzky-Golay smoothing+standard normal variate+first derivate resulted in a good determination of gossypol content in intact cottonseeds.Conclusions:Near-infrared spectroscopy coupled with different spectral pretreatments and partial least squares(PLS)regression has exhibited the feasibility in predicting gossypol content in intact cottonseeds,rapidly and non destructively.It could be used as an alternative method to substitute for traditional one to determi ne the gossypol content in intact cottonseeds.展开更多
The white-rot fungus, Phanerochaete chrysosporium (P. chrysosporium), was inoculated during different phases of agricultural waste composting, and its effect on the fluorescence spectroscopy characteristics of humic a...The white-rot fungus, Phanerochaete chrysosporium (P. chrysosporium), was inoculated during different phases of agricultural waste composting, and its effect on the fluorescence spectroscopy characteristics of humic acid (HA) was studied. The results show that the emission spectra have a sharp peak at 400 nm and a broad shoulder with the maximum centered at 460 nm. The excitation spectra have two peaks and exhibit red shift (shift to longer wavelengths) at 470 nm. The synchronous scan spectra present a number of peaks and shoulders, and the peaks at shorter wavelengths disappear gradually and form a shoulder. At the final stage of composting, the fluorescence spectra have similar shapes, but the fluorescence intensities decrease. P. chrysosporium increases the degree of aromatization and polymerization of HA when it is inoculated during the second fermentation phase, while it does not produce an obvious change on the humification degree of HA when it is inoculated during the first fermentation phase. Compared with the fluorescence spectroscopy characteristics of HA from soil, the structure of HA from compost is simpler and the activity is higher.展开更多
The prickly pear fruit helps in combating viral based infections.It is used to treat diabetes and declared to possess hypoglycemic effects.There is also record of the usage of the fruit in the olden days as a remedy f...The prickly pear fruit helps in combating viral based infections.It is used to treat diabetes and declared to possess hypoglycemic effects.There is also record of the usage of the fruit in the olden days as a remedy for diabetes,lipid disorders,inflammation,ulcers,and pharmacologic side effects.The chemical composition and nutritional values of skin,flesh and seed of prickly pear fruit were investigated and discussed on a dry weight situation.The infrared spectra as well as scanning electron microscopy(SEM)techniques were used to identify the functional groups of carbohydrates,amino acids,and protein.The infrared spectral data of all three(skin,flesh,and seeds)species were recorded and assigned to the presence of distinguish peaks that referred to the three different sugars(glucose,fructose and saccharose)and cyclic aliphatic hydrocarbons moieties.On the other hand,the SEM is a powerful tool to investigate the morphological features of the components.SEM assays were examined on the surfaces of skin,flesh and seed branches showing a small particle that tends to form clusters with different shapes compared to each other.The Energy-dispersive X-ray spectroscopy(EDX)is an analytical technique used for the elemental analysis or chemical characterization of a sample.The EDX spectral technique of the skin,flesh and seeds were confirmed the presence of different essential and useful elements such as carbon,oxygen,magnesium,calcium,potassium,sulfur,aluminum,silicon,chloride,and phosphorus.展开更多
The microstructure and texture of C/C composites with a resin-derived carbon, a rough laminar （RL） pyrocarbon and a smooth laminar pyrocarbon, before and after braking tests, were investigated by Raman spectroscopy....The microstructure and texture of C/C composites with a resin-derived carbon, a rough laminar （RL） pyrocarbon and a smooth laminar pyrocarbon, before and after braking tests, were investigated by Raman spectroscopy. The full width at half maximum （FWHM） of the D-band indicates the amount of defects in the in-plane lattice, while the G-to-D band intensity （peak area） ratios （lC/ID） is used to evaluate the degree of graphitization. The results show that the FWHM of D-band of sample with RL pyrocarbon changes greatly from 36 cm-1 to 168 cm 1 after braking tests, which indicates that a large number of lattice defects are produced on its wear surface. However, the graphitization degree of resin-derived carbon sample rises significantly, because the IC/1D increases from 0.427 to 0.928. Braking tests under normal loading conditions, involving high temperature and high pressure, produce a lot of lattice defects on the wear surface, and induce the graphitization of the surface. Sample with RL pyrocarbon having a low hardness is easy to deform, and has the most lattice defects on the wear surface after braking. While raw materials with resin-derived carbon have the lowest graphitization degree which rises greatly during braking.展开更多
Background:Cotton fiber maturity is an important property that partially determines the processing and performance of cotton.Due to difficulties of obtaining fiber maturity values accurately from every plant of a gene...Background:Cotton fiber maturity is an important property that partially determines the processing and performance of cotton.Due to difficulties of obtaining fiber maturity values accurately from every plant of a genetic population,cotton geneticists often use micronaire(MIC) and/or lint percentage for classifying immature phenotypes from mature fiber phenotyp es although they are complex fiber traits.The recent development of an algorithm for determining cotton fiber maturity(MIR)from Fourier transform infrared(FT-IR)spectra explores a novel way to measure fiber maturity efficiently and accurately.However,the algorithm has not been tested with a genetic population consisting of a large number of progeny pla,nts.Results:The merits and limits of the MIC-or lint percentage-bas ed phenotyping method were demonstrated by comparing the observed phenotypes with the predicted phenotypes based on their DNA marker genotypes in a genetic population consisting of 708 F2 plants with various fiber maturity.The observed MIC-based fiber phenotypes matched to the predicted phenotypes better than the observed lint percenta ge-based fiber phenotypes.The lint percentage was obtained from each of F2 plants,whereas the MIC values were unable to be obtained from the entire population since certain F2 plants produced insufficient fiber mass for their measurements.To test the feasibiility of cotton fiber infrared maturity(MIR)as a viable phenotyping tool for genetic analyses,we me asured FT-IR spectra from the second population composed of 80 F2 plants with various fiber maturities,determined MIR values using the algorithms,and compared them with their genotypes in addition to other fiber phenotypes.The results showed that MIR values were successfully obtained from each of the F2 plants,and the observed MIR-based phenotypes fit well to the predicted phenotypes based on their DNA marker genotypes as well as the observed phenotypes based on a combination of MIC and lint percentage.Conclusions:The M,R value obtained from FT-IR spectra of cotton fibers is able to accurately assess fiber maturity of all plants of a population in a quantitative way.The technique provides an option for cotton geneticists to determine fiber maturity rapidly and efficiently.展开更多
Pyrite is one of the common natural mineral.It is easily oxidized and brings heavy metal contaminations,therefore it is the main source of acidity mine drainage.The study on the dynamics of pyriteis helpful to compreh...Pyrite is one of the common natural mineral.It is easily oxidized and brings heavy metal contaminations,therefore it is the main source of acidity mine drainage.The study on the dynamics of pyriteis helpful to comprehending the mechanism of its pollution.In the present paper,an experi mental method was designed that phenanthroline reacts with Fe2+ that is released from pyrite in solution,and produces stable orange-red complex compound.It can be detected by absorption spectroscopy.In-situ characterization of oxidation of pyrite can be achieved by this method.The results showed that the method is reliable and accurate,and it has high sensitivity and little interference;the reaction rate of oxidation increasedl inearly with time,corresponding to the characterization of zero-order reaction;oxidation of pyrite belongs to the surface reaction and the process of surface reactionis rate determining step.展开更多
In this work,we have reported the synthesis and spectroscopic characterization of captopril(Cap)coordination compounds:Cu(Cap)·2H 2O,Cr(Cap)·H 2O,Zn(Cap)·3H 2O and Mg(Cap)4.Herein,it is worthily mention...In this work,we have reported the synthesis and spectroscopic characterization of captopril(Cap)coordination compounds:Cu(Cap)·2H 2O,Cr(Cap)·H 2O,Zn(Cap)·3H 2O and Mg(Cap)4.Herein,it is worthily mentioned that the FTIR spectroscopic technique was employed to recognized the nature of coordination between captopril ligand and copper,chromium,zinc and magnesium(Ⅱ)metal ions.In view of the infrared spectroscopic tool,the copper(Ⅱ)metal ion coordinated toward captopril drug ligand through sulfur atom of SH group dependent on the absent of stretching vibration band of—SH.Based on this result,the stretching motion ofνa(COO)shifts clearly indicates that Cu 2+,Cr 2+,Zn 2+and Mg 2+the carboxylic group is employed as coordinative site for all compounds as a metal-ligand coordinative bond.As a general behavior,it is verified that the coordination compound thermal stability(considering the release of captopril molecules,not the release of water molecules)is affected by the metal cation radius:minor radius is associated with higher thermal stability,probably due to a higher metal-captopril bond dissociation enthalpy.展开更多
Graphene, the thinnest and hardest nano-material in the world, is non-toxic, sustainable and with minimal environmental footprint. As one of the most important carbon materials, it is composed of a monolayer of carbon...Graphene, the thinnest and hardest nano-material in the world, is non-toxic, sustainable and with minimal environmental footprint. As one of the most important carbon materials, it is composed of a monolayer of carbon atoms with a honeycomb structure. Nowadays, scientists have tried to use it in the biomedicine subject because of its superior physical and chemical properties and excellent biocompatibility.展开更多
In this paper,the synthesis of a novel polyoxovanadiumborate[Li(H2O)3]3[V12B18O48(OH)12(OH)]·(H2O)5by hydrothermal method.FTIR,2DFTIR and UV-Vis absorption spectroscopy were employed to explore the relationships ...In this paper,the synthesis of a novel polyoxovanadiumborate[Li(H2O)3]3[V12B18O48(OH)12(OH)]·(H2O)5by hydrothermal method.FTIR,2DFTIR and UV-Vis absorption spectroscopy were employed to explore the relationships between structure and properties of 3-D compound 1.展开更多
基金Supported by the Natural Science Foundation of China(51705326,52075339)。
文摘In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are closely related to the hydrogen bonds(H-bonds)network between water molecules.Therefore,it is crucial to analyze the relationship between these two aspects.In this paper,the infrared spectrum and motion characteristics of the stretching vibrations of the O-H bonds in one-dimensional confined water(1DCW)and bulk water(BW)in(6,6)single-walled carbon nanotubes(SWNT)are studied by molecular dynamics simulations.The results show that the stretching vibrations of the two O-H bonds in 1DCW exhibit different frequencies in the infrared spectrum,while the O-H bonds in BW display two identical main frequency peaks.Further analysis using the spring oscillator model reveals that the difference in the stretching amplitude of the O-H bonds is the main factor causing the change in vibration frequency,where an increase in stretching amplitude leads to a decrease in spring stiffness and,consequently,a lower vibration frequency.A more in-depth study found that the interaction of H-bonds between water molecules is the fundamental cause of the increased stretching amplitude and decreased vibration frequency of the O-H bonds.Finally,by analyzing the motion trajectory of the H atoms,the dynamic differences between 1DCW and BW are clearly revealed.These findings provide a new perspective for understanding the behavior of water molecules at the nanoscale and are of significant importance in advancing the development of infrared spectroscopy detection technology.
基金Supported by Bissell Distinguished Professor Endowment Fund at UNC-Charlotte。
文摘Although there are numerous optical spectroscopy techniques and methods that have been used to extract the fundamental bandgap of a semiconductor,most of them belong to one of these three approaches:(1)the excitonic absorption,(2)modulation spectroscopy,and(3)the most widely used Tauc-plot.The excitonic absorption is based on a many-particle theory,which is physically the most correct approach,but requires more stringent crystalline quality and appropriate sample preparation and experimental implementation.The Tauc-plot is based on a single-particle theo⁃ry that neglects the many-electron effects.Modulation spectroscopy analyzes the spectroscopy features in the derivative spectrum,typically,of the reflectance and transmission under an external perturbation.Empirically,the bandgap ener⁃gy derived from the three approaches follow the order of E_(ex)>E_(MS)>E_(TP),where three transition energies are from exci⁃tonic absorption,modulation spectroscopy,and Tauc-plot,respectively.In principle,defining E_(g) as the single-elec⁃tron bandgap,we expect E_(g)>E_(ex),thus,E_(g)>E_(TP).In the literature,E_(TP) is often interpreted as E_(g),which is conceptual⁃ly problematic.However,in many cases,because the excitonic peaks are not readily identifiable,the inconsistency be⁃tween E_(g) and E_(TP) becomes invisible.In this brief review,real world examples are used(1)to illustrate how excitonic absorption features depend sensitively on the sample and measurement conditions;(2)to demonstrate the differences between E_(ex),E_(MS),and E_(TP) when they can be extracted simultaneously for one sample;and(3)to show how the popular⁃ly adopted Tauc-plot could lead to misleading results.Finally,it is pointed out that if the excitonic absorption is not ob⁃servable,the modulation spectroscopy can often yield a more useful and reasonable bandgap than Tauc-plot.
基金Supported by the National Key R&D Program of China(2023YFD2101001)National Natural Science Foundation of China(32202144,61807001)。
文摘To address the issues of peak overlap caused by complex matrices in agricultural product terahertz(THz)spectral signals and the dynamic,nonlinear interference induced by environmental and system noise,this study explores the feasibility of adaptive-signal-decomposition-based denoising methods to improve THz spectral quality.THz time-domain spectroscopy(THz-TDS)combined with an attenuated total reflection(ATR)accessory was used to collect THz absorbance spectra from 48 peanut samples.Taking the quantitative prediction model of peanut moisture content based on THz-ATR as an example,wavelet transform(WT),empirical mode decomposition(EMD),local mean decomposition(LMD),and its improved methods-segmented local mean decomposition(SLMD)and piecewise mirror extension local mean decomposition(PME-LMD)-were employed for spectral denoising.The applicability of different denoising methods was evaluated using a support vector regression(SVR)model.Experimental results show that the peanut moisture content prediction model constructed after PME-LMD denoising achieved the best performance,with a root mean square error(RMSE),coefficient of determination(R^(2)),and mean absolute percentage error(MAPE)of 0.010,0.912,and 0.040,respectively.Compared with traditional methods,PME-LMD significantly improved spectral quality and model prediction performance.The PME-LMD denoising strategy proposed in this study effectively suppresses non-uniform noise interference in THz spectral signals,providing an efficient and accurate preprocessing method for THz spectral analysis of agricultural products.This research provides theoretical support and technical guidance for the application of THz technology for detecting agricultural product quality.
基金supported by the Aeronautical Science Foundation of China(Grant No.20230018072011)。
文摘3-Nitro-1,2,4-triazol-5-one(NTO)is a typical high-energy,low-sensitivity explosive,and accurate concentration monitoring is critical for crystallization process control.In this study,a high-precision quantitative analytical model for NTO concentration in ethanol solutions was developed by integrating real-time ATR-FTIR spectroscopy with chemometric and machine learning techniques.Dynamic spectral data were obtained by designing multi-concentration gradient heating-cooling cycle experiments,abnormal samples were eliminated using the isolation forest algorithm,and the effects of various preprocessing methods on model performance were systematically evaluated.The results show that partial least squares regression(PLSR)exhibits superior generalization ability compared to other models.Vibrational bands corresponding to C=O and–NO_(2)were identified as key predictors for concentration estimation.This work provides an efficient and reliable solution for real-time concentration monitoring during NTO crystallization and holds significant potential for process analytical applications in energetic material manufacturing.
基金Projects(5120833351078253)supported by the National Natural Science Foundation of China+4 种基金Projects(2014011036-12014131019TYUT2014YQ017OIT2015)supported by the Natural Science Foundation of Shanxi ProvinceChina
文摘Based on three different kinds of conductive paths in microstructure of soil and theory of electrochemical impedance spectroscopy(EIS), an integrated equivalent circuit model and impedance formula for soils were proposed, which contain 6 meaningful resistance and reactance parameters. Considering the conductive properties of soils and dispersion effects, mathematical equations for impedance under various circuit models were deduced and studied. The mathematical expression presents two semicircles for theoretical EIS Nyquist spectrum, in which the center of one semicircle is degraded to simply the equivalent model. Based on the measured parameters of EIS Nyquist spectrum, meaningful soil parameters can easily be determined. Additionally, EIS was used to investigate the soil properties with different water contents along with the mathematical relationships and mechanism between the physical parameters and water content. Magnitude of the impedance decreases with the increase of testing frequency and water content for Bode graphs. The proposed model would help us to better understand the soil microstructure and properties and offer more reasonable explanations for EIS spectra.
基金supported by the chemical materials institute China academy of engineering physics,the doctoral innovation research assistance program of science and technology review
文摘Parent compounds of cyclopentadienyltitanium substituted heteropolytungstates with Keggin structure,An[(CpTi)XW11O39]·xH2O(A=Me4N,K;X=P,Si,Co;Cp=η5-C5H5) were synthesized in aqueous phase.By allowing parent heteropoly compounds to react with protonated 8-quinolinol,the title supermolecular compounds(C9H8NO)mAn[(CpTi)XW11O39]·xH2O(A=Me4N,H;X=P,Si,Co) were synthesized.The title compounds were characterized by means of elementary analysis,IR,UV,1H NMR,XRD and TG-DSC.The results indicate that the title compounds are new heteropoly compounds,and there is a charge transfer interaction between the organic cation and heteropoly anion.The results obtained from thermal analysis show that QCpTiPW,QCpTiSiW and QCpTiCoW begin to decompose at 212.4,194.2 and 171.2 ℃,respectively.The results obtained from antibacterial test reveal that QCpTiSiW has the best antibacterial activity,and the MIC values of QCpTiSiW against Escherichia coli and Staphylococcus aurous are 64.0 and 0.500 μg·mL-1,respectively.
基金Supported by the National 12th Five-year Plan for Science&Technology Support Fund(2012BAK08B04-02)the Heilongjiang Science and Technology Plan(GC12B404)
文摘Near infrared spectrometer technology under a wavelength range of 918-1045 nm was used to rapidly detect paddy rice that was stored at 5℃, 15℃ and 25℃. A total of 121 paddy rice samples were collected from artificial infection with moulds to build the calibration models to calculate the total number colony of moulds based on the principal component regression method and multiple linear regression method. The results of statistical analysis indicated that multiple linear regression method was applicable to the detection of the total number colony of moulds. The correlation of calibration data set was 0.943. The correlation of prediction data set was 0.897. Therefore, the result showed that near infrared spectroscopy could be a useful instrumental method for determining the total number colony of moulds in paddy rice. The near infrared spectroscopy methodology could be applied for monitoring mould contamination in postharvest paddy rice during storage and might become a powerful tool for monitoring the safety of the grain.
基金the Scientific Investigate Projects of Firat University,Turkey(FF.14.10)
文摘There is need to determination of uranium concentration at ppb level in environmental matrices.Due to low sensitivity of FAAS,UV-Visible Spectroscopy is generally used as measurement technique.In this study,ion-imprinted polymers(IIP)were prepared for uranyl ion(imprint ion)by formation of ternary(salicylaldoxime and 4-vinylpyridine)complex in 2-methoxy ethanol(porogen)following copolymerization with methacrylic acid(MAA)as a functional monomer and ethylene glycol dimethacrylate(EGDMA)as crosslinking monomer using 2,2-azobisisobutyronitrile as initiator.The synthesized polymers were characterized by FTIR and TGA analysis.ArsenazoⅢin 3M HClO_4 was used as complexing agent in the measurement step.The optimal pH for preconcentration was found to be between 3.5~6.5values.The developed method was applied to uranium(Ⅵ)determination in natural water samples.
基金Defense Acquisition Program Administration and Agency for Defense Development under the contract UD110095CD
文摘In this study,aluminum flame analysis was researched in order to develop a measurement method for high-energy-density metal aluminum dust cloud combustion,and the flame temperature and UV-VIS-IR emission spectra were precisely measured using a spectrometer.Because the micron-sized aluminum flame temperature was higher than 2 400 K,Flame temperature was measured by a non-contact optical technique,namely,a modified two-color method using 520 and 640nm light,as well as by apolychromatic fitting method.These methods were applied experimentally after accurate calibration.The flame temperature was identified to be higher than 2 400 Kusing both methods.By analyzing the emission spectra,we could identify AlO radicals,which occur dominantly in aluminum combustion.This study paves the way for realization of a measurement technique for aluminum dust cloud combustion flames,and it will be applied in the aluminum combustors that are in development for military purposes.
基金worked in funding projects from DST,New Delhi for extensive research in the area of nano-bio molecular spectroscopy and sensor technology development
文摘The UV-Vis and infrared(IR)absorption spectra of organophosphorus(OP)pesticides have been studied.A correlation in spectra was developed to optimize the OP pesticides in the environments.The spectroscopic(UV-Vis and IR)spectrum of OP pesticides like methyl parathion,malathion and parathion has been interpreted in detail.A complete calculation of the normal frequencies and absolute intensities of UV-Vis and IR absorption bands are interpreted with the help of corresponding experimental data.In the colorimetric reactions,the bands appear at 2 077,1 637,1 455,1 015,655cm^(-1) for malathion;2 081,1 639,1 316,1 015,794,683cm^(-1) for parathion;2 078,1 632,1 032,794cm^(-1) for methyl parathion were used for quantitative or qualitative analysis.All these IR spectra were acquired by averaging 100 scans at a resolution of 4cm^(-1).It is determined experimentally in the region 200~450nm for UV-Vis absorption bands and in the region 400~4 000cm^(-1) for IR absorption bands.It is concluded that the mainly optically active groups(P—OH, C=O,P=O, C—O—C,P—O—C, P=S, —OH)present in pesticides which are responsible in change in significant data for quantitative and qualitative analysis.The various optical properties like wavelength,band energy,wave number,and frequency,also are calculated.
文摘Laser induced breakdown Spectroscopy(LIBS)was applied for the elemental analysis and exposure of the heavy metals in betel leaves in air.Pulsed Nd∶YAG(1064 nm)in conjunction with a suitable detector(LIBS 2000+,Ocean Optics,Inc)having the optical resolution of 0.06 nm was used to record the emission spectra from 220 to 720 nm.Elements like Al,Ba,Ca,Cr,Cu,P,Fe,K,Mg,Mn,Na,P,S,Sr,and Zn were found to present in the samples.The relative abundances of the observed elements were calculated through standard calibration curve method,integrated intensity ratio method,and weight percentage LIBS approach.LIBS findings were validated by comparing its results with the results obtained using a typical analytical technique of Inductively Coupled plasma-optical emission spectroscopy(ICP-OES).Limit of detection(LOD)of the LIBS system was also estimated for heavy metals.The experience gain through this work implies that LIBS could be highly applicable for testing the quality and purity of food products.
基金The research work was funded by The National Key Technology R&D Program of China(2016YFD0101404)China Agriculture Research System(CARS-18-25)Jiangsu Collaborative Innovation Center for Modern Crop Production.
文摘Background:Gossypol found in cottonseeds is toxic to human beings and monogastric animals and is a primary parameter for the integrated utilization of cottonseed products.It is usually determined by the techniques relied on complex pretreatment procedures and the samples after determination cannot be used in the breeding program,so it is of great importance to predict the gossypol content in cottonseeds rapidly and nondestructively to substitute the traditional analytical method.Results:Gossypol content in cottonseeds was investigated by near-infrared spectroscopy(NIRS)and high-performance liquid chromatography(HPLC).Partial least squares regression,combined with spectral pretreatment methods including Savitzky-Golay smoothing,standard normal variate,multiplicative scatter correction,and first derivate were tested for optimizing the calibration models.NIRS technique was efficient in predicting gossypol content in intact cottonseeds,as revealed by the root-mean-square error of cross-validation(RMSECV),root-mean-square error of prediction(RMSEP),coefficient for determination of prediction(R_(p)^(2)),and residual predictive deviation(RPD)values for all models,being 0.05∼0.07,0.04∼0.06,0.82∼0.92,and 2.3∼3.4,respectively.The optimized model pretreated by Savitzky-Golay smoothing+standard normal variate+first derivate resulted in a good determination of gossypol content in intact cottonseeds.Conclusions:Near-infrared spectroscopy coupled with different spectral pretreatments and partial least squares(PLS)regression has exhibited the feasibility in predicting gossypol content in intact cottonseeds,rapidly and non destructively.It could be used as an alternative method to substitute for traditional one to determi ne the gossypol content in intact cottonseeds.
基金Project(2005CB724203) supported by the Major State Basic Research and Development Program of ChinaProject(IRT0719) supported by the Program for Changjiang Scholars and Innovative Research Team in University of China+1 种基金Projects(50608029,50808073) supported by the National Natural Science Foundation of ChinaProject(2007185) supported by the Environmental Protection Technology Research Program of Hunan Province,China
文摘The white-rot fungus, Phanerochaete chrysosporium (P. chrysosporium), was inoculated during different phases of agricultural waste composting, and its effect on the fluorescence spectroscopy characteristics of humic acid (HA) was studied. The results show that the emission spectra have a sharp peak at 400 nm and a broad shoulder with the maximum centered at 460 nm. The excitation spectra have two peaks and exhibit red shift (shift to longer wavelengths) at 470 nm. The synchronous scan spectra present a number of peaks and shoulders, and the peaks at shorter wavelengths disappear gradually and form a shoulder. At the final stage of composting, the fluorescence spectra have similar shapes, but the fluorescence intensities decrease. P. chrysosporium increases the degree of aromatization and polymerization of HA when it is inoculated during the second fermentation phase, while it does not produce an obvious change on the humification degree of HA when it is inoculated during the first fermentation phase. Compared with the fluorescence spectroscopy characteristics of HA from soil, the structure of HA from compost is simpler and the activity is higher.
基金Taif University Researches Supporting Project number(TURSP-2020/01),Taif University,Taif,Saudi Arabia。
文摘The prickly pear fruit helps in combating viral based infections.It is used to treat diabetes and declared to possess hypoglycemic effects.There is also record of the usage of the fruit in the olden days as a remedy for diabetes,lipid disorders,inflammation,ulcers,and pharmacologic side effects.The chemical composition and nutritional values of skin,flesh and seed of prickly pear fruit were investigated and discussed on a dry weight situation.The infrared spectra as well as scanning electron microscopy(SEM)techniques were used to identify the functional groups of carbohydrates,amino acids,and protein.The infrared spectral data of all three(skin,flesh,and seeds)species were recorded and assigned to the presence of distinguish peaks that referred to the three different sugars(glucose,fructose and saccharose)and cyclic aliphatic hydrocarbons moieties.On the other hand,the SEM is a powerful tool to investigate the morphological features of the components.SEM assays were examined on the surfaces of skin,flesh and seed branches showing a small particle that tends to form clusters with different shapes compared to each other.The Energy-dispersive X-ray spectroscopy(EDX)is an analytical technique used for the elemental analysis or chemical characterization of a sample.The EDX spectral technique of the skin,flesh and seeds were confirmed the presence of different essential and useful elements such as carbon,oxygen,magnesium,calcium,potassium,sulfur,aluminum,silicon,chloride,and phosphorus.
基金Project(2006CB600906) supported by the National Basic Research Program of China
文摘The microstructure and texture of C/C composites with a resin-derived carbon, a rough laminar （RL） pyrocarbon and a smooth laminar pyrocarbon, before and after braking tests, were investigated by Raman spectroscopy. The full width at half maximum （FWHM） of the D-band indicates the amount of defects in the in-plane lattice, while the G-to-D band intensity （peak area） ratios （lC/ID） is used to evaluate the degree of graphitization. The results show that the FWHM of D-band of sample with RL pyrocarbon changes greatly from 36 cm-1 to 168 cm 1 after braking tests, which indicates that a large number of lattice defects are produced on its wear surface. However, the graphitization degree of resin-derived carbon sample rises significantly, because the IC/1D increases from 0.427 to 0.928. Braking tests under normal loading conditions, involving high temperature and high pressure, produce a lot of lattice defects on the wear surface, and induce the graphitization of the surface. Sample with RL pyrocarbon having a low hardness is easy to deform, and has the most lattice defects on the wear surface after braking. While raw materials with resin-derived carbon have the lowest graphitization degree which rises greatly during braking.
基金supported by the USDA-ARS Research Project#6054-21000-017-0ODCotton Incorporated-sponsored project#19-858
文摘Background:Cotton fiber maturity is an important property that partially determines the processing and performance of cotton.Due to difficulties of obtaining fiber maturity values accurately from every plant of a genetic population,cotton geneticists often use micronaire(MIC) and/or lint percentage for classifying immature phenotypes from mature fiber phenotyp es although they are complex fiber traits.The recent development of an algorithm for determining cotton fiber maturity(MIR)from Fourier transform infrared(FT-IR)spectra explores a novel way to measure fiber maturity efficiently and accurately.However,the algorithm has not been tested with a genetic population consisting of a large number of progeny pla,nts.Results:The merits and limits of the MIC-or lint percentage-bas ed phenotyping method were demonstrated by comparing the observed phenotypes with the predicted phenotypes based on their DNA marker genotypes in a genetic population consisting of 708 F2 plants with various fiber maturity.The observed MIC-based fiber phenotypes matched to the predicted phenotypes better than the observed lint percenta ge-based fiber phenotypes.The lint percentage was obtained from each of F2 plants,whereas the MIC values were unable to be obtained from the entire population since certain F2 plants produced insufficient fiber mass for their measurements.To test the feasibiility of cotton fiber infrared maturity(MIR)as a viable phenotyping tool for genetic analyses,we me asured FT-IR spectra from the second population composed of 80 F2 plants with various fiber maturities,determined MIR values using the algorithms,and compared them with their genotypes in addition to other fiber phenotypes.The results showed that MIR values were successfully obtained from each of the F2 plants,and the observed MIR-based phenotypes fit well to the predicted phenotypes based on their DNA marker genotypes as well as the observed phenotypes based on a combination of MIC and lint percentage.Conclusions:The M,R value obtained from FT-IR spectra of cotton fibers is able to accurately assess fiber maturity of all plants of a population in a quantitative way.The technique provides an option for cotton geneticists to determine fiber maturity rapidly and efficiently.
基金Supported by the National Natural Science Foundation of China(U0633001)the Project of Depart ment of Science & Technology of University Belonging to Guangzhou(62013)
文摘Pyrite is one of the common natural mineral.It is easily oxidized and brings heavy metal contaminations,therefore it is the main source of acidity mine drainage.The study on the dynamics of pyriteis helpful to comprehending the mechanism of its pollution.In the present paper,an experi mental method was designed that phenanthroline reacts with Fe2+ that is released from pyrite in solution,and produces stable orange-red complex compound.It can be detected by absorption spectroscopy.In-situ characterization of oxidation of pyrite can be achieved by this method.The results showed that the method is reliable and accurate,and it has high sensitivity and little interference;the reaction rate of oxidation increasedl inearly with time,corresponding to the characterization of zero-order reaction;oxidation of pyrite belongs to the surface reaction and the process of surface reactionis rate determining step.
基金The Deanship of Scientific Research at Princess Nourah bint Abdulrahman University,through the Research Groups Program Grant no.(RGP-1440-0003)
文摘In this work,we have reported the synthesis and spectroscopic characterization of captopril(Cap)coordination compounds:Cu(Cap)·2H 2O,Cr(Cap)·H 2O,Zn(Cap)·3H 2O and Mg(Cap)4.Herein,it is worthily mentioned that the FTIR spectroscopic technique was employed to recognized the nature of coordination between captopril ligand and copper,chromium,zinc and magnesium(Ⅱ)metal ions.In view of the infrared spectroscopic tool,the copper(Ⅱ)metal ion coordinated toward captopril drug ligand through sulfur atom of SH group dependent on the absent of stretching vibration band of—SH.Based on this result,the stretching motion ofνa(COO)shifts clearly indicates that Cu 2+,Cr 2+,Zn 2+and Mg 2+the carboxylic group is employed as coordinative site for all compounds as a metal-ligand coordinative bond.As a general behavior,it is verified that the coordination compound thermal stability(considering the release of captopril molecules,not the release of water molecules)is affected by the metal cation radius:minor radius is associated with higher thermal stability,probably due to a higher metal-captopril bond dissociation enthalpy.
文摘Graphene, the thinnest and hardest nano-material in the world, is non-toxic, sustainable and with minimal environmental footprint. As one of the most important carbon materials, it is composed of a monolayer of carbon atoms with a honeycomb structure. Nowadays, scientists have tried to use it in the biomedicine subject because of its superior physical and chemical properties and excellent biocompatibility.
基金the NNSFC(21473030,1371033)Fujian Provincial Natural Science Foundation(2013J01042)the Open Fund of State Key Laboratory of Structural Chemistry(20130015)
文摘In this paper,the synthesis of a novel polyoxovanadiumborate[Li(H2O)3]3[V12B18O48(OH)12(OH)]·(H2O)5by hydrothermal method.FTIR,2DFTIR and UV-Vis absorption spectroscopy were employed to explore the relationships between structure and properties of 3-D compound 1.
