Dynamic analysis steps and general flow of fast lagrangian analysis of continua in 3 dimensions(FLAC3D) were discussed. Numerical simulation for influence of excavation and blasting vibration on stability of mined-out...Dynamic analysis steps and general flow of fast lagrangian analysis of continua in 3 dimensions(FLAC3D) were discussed. Numerical simulation for influence of excavation and blasting vibration on stability of mined-out area was carried out with FLAC3D. The whole analytical process was divided into two steps, including the static analysis and the dynamic analysis which were used to simulate the influence of excavation process and blasting vibration respectively. The results show that the shape of right upper boundary is extremely irregular after excavation, and stress concentration occurs at many places and higher tensile stress appears. The maximum tensile stress is higher than the tensile strength of rock mass, and surrounding rock of right roof will be damaged with tension fracture. The maximum displacement of surrounding rock is 4.75 mm after excavation. However, the maximum displacement increases to 5.47 mm after the blasting dynamic load is applied. And the covering area of plastic zones expands obviously, especially at the foot of right upper slope. The analytical results are in basic accordance with the observed results on the whole. Damage and disturbance on surrounding rock to some degree are caused by excavation, while blasting dynamic load increases the possibility of occurrence of dynamic instability and destruction further. So the effective supporting and vibration reducing measures should be taken during mining.展开更多
Design of forming dies and whole process of simulation of cold rolling involutes spline can be realized by using of CAD software of PRO-E and CAE software of DEFORM-3D. Software DEFORM-3D provides an automatic and opt...Design of forming dies and whole process of simulation of cold rolling involutes spline can be realized by using of CAD software of PRO-E and CAE software of DEFORM-3D. Software DEFORM-3D provides an automatic and optimized remeshing function, especially for the large deformation. In order to use this function sufficiently, simulation of cold rolling involutes spline can be implemented indirectly. The relationship between die and workpiece, forming force and characteristic of deformation in the forming process of cold rolling involutes spline are analyzed and researched. Meanwhile, reliable proofs for the design of dies and deforming equipment are provided.展开更多
In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fi...In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fines and fine aggregates） and air voids, based on three-dimensional （3D） heterogeneous specimen, X-ray computerized tomography （X-ray CT） was used to scan the asphalt specimens to obtain the real internal microstrnctures of asphalt mixture. CT images were reconstructed to build up 3D digital specimen, and the viscoelastic properties of mastic were described with Burgers model The uniaxial creep numerical simulations of three different levels of aggregate gradation were conducted. The simulation results agree well with the experimental results. The numerical simulation of asphalt mixture incorporated with real 3D microstructure based on finite element method is a promising application to conduct research of asphalt concrete. Additionally, this method can increase the mechanistic understanding of global viscoelastic properties of asphalt mixtures by linking the real 3D microstructure.展开更多
The effect of freeze-thaw(F-T)cycles on the mechanical behaviors and internal mechanism of rock mass is a critical research topic.In permafrost or seasonally frozen regions,F-T cycles have adverse effects on the mecha...The effect of freeze-thaw(F-T)cycles on the mechanical behaviors and internal mechanism of rock mass is a critical research topic.In permafrost or seasonally frozen regions,F-T cycles have adverse effects on the mechanical properties of rock mass,leading to many serious disasters in mining and geotechnical operations.In this paper,uniaxial compression tests are carried out on cyan sandstone after different F-T cycles.The failure modes and damage evolution of cyan sandstone under F-T cycles are studied.In addition,from the perspective of fracture and pore volume,the calculation equations of rock strain under frost heaving pressure and F-T cycles are established and verified with the corresponding laboratory tests.Subsequently,based on the classical damage theory,the F-T damage variables of cyan sandstone under different F-T cycles are calculated,and the meso-damage calculation model of cyan sandstone under F-T-loading coupling conditions is derived.Furthermore,through the discrete element numerical simulation software(PFC^(3D)),the microscopic damage evolution process of cyan sandstone under uniaxial compression after F-T cycles is studied,including the change of microcracks number,distribution of microcracks,and the acoustic emission(AE)count.The goal of this study is to investigate the damage evolution mechanism of rock from the mesoscopic and microscopic aspects,which has certain guiding value for accurately understanding the damage characteristics of rock in cold regions.展开更多
基金Project (50490272) supported by the National Natural Science Foundation of China project(NCET-05-0687) supportedby Programfor New Century Excellent Talents project (040109) supported bythe Doctor Degree Paper Innovation Engineering of CentralSouth University
文摘Dynamic analysis steps and general flow of fast lagrangian analysis of continua in 3 dimensions(FLAC3D) were discussed. Numerical simulation for influence of excavation and blasting vibration on stability of mined-out area was carried out with FLAC3D. The whole analytical process was divided into two steps, including the static analysis and the dynamic analysis which were used to simulate the influence of excavation process and blasting vibration respectively. The results show that the shape of right upper boundary is extremely irregular after excavation, and stress concentration occurs at many places and higher tensile stress appears. The maximum tensile stress is higher than the tensile strength of rock mass, and surrounding rock of right roof will be damaged with tension fracture. The maximum displacement of surrounding rock is 4.75 mm after excavation. However, the maximum displacement increases to 5.47 mm after the blasting dynamic load is applied. And the covering area of plastic zones expands obviously, especially at the foot of right upper slope. The analytical results are in basic accordance with the observed results on the whole. Damage and disturbance on surrounding rock to some degree are caused by excavation, while blasting dynamic load increases the possibility of occurrence of dynamic instability and destruction further. So the effective supporting and vibration reducing measures should be taken during mining.
文摘Design of forming dies and whole process of simulation of cold rolling involutes spline can be realized by using of CAD software of PRO-E and CAE software of DEFORM-3D. Software DEFORM-3D provides an automatic and optimized remeshing function, especially for the large deformation. In order to use this function sufficiently, simulation of cold rolling involutes spline can be implemented indirectly. The relationship between die and workpiece, forming force and characteristic of deformation in the forming process of cold rolling involutes spline are analyzed and researched. Meanwhile, reliable proofs for the design of dies and deforming equipment are provided.
基金Project(51038004) supported by the National Natural Science Foundation of China
文摘In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fines and fine aggregates） and air voids, based on three-dimensional （3D） heterogeneous specimen, X-ray computerized tomography （X-ray CT） was used to scan the asphalt specimens to obtain the real internal microstrnctures of asphalt mixture. CT images were reconstructed to build up 3D digital specimen, and the viscoelastic properties of mastic were described with Burgers model The uniaxial creep numerical simulations of three different levels of aggregate gradation were conducted. The simulation results agree well with the experimental results. The numerical simulation of asphalt mixture incorporated with real 3D microstructure based on finite element method is a promising application to conduct research of asphalt concrete. Additionally, this method can increase the mechanistic understanding of global viscoelastic properties of asphalt mixtures by linking the real 3D microstructure.
基金Projects(52474167,52104109)supported by the National Natural Science Foundation of ChinaProject(2022JJ40602)supported by the Natural Science Foundation of Hunan Province,China。
文摘The effect of freeze-thaw(F-T)cycles on the mechanical behaviors and internal mechanism of rock mass is a critical research topic.In permafrost or seasonally frozen regions,F-T cycles have adverse effects on the mechanical properties of rock mass,leading to many serious disasters in mining and geotechnical operations.In this paper,uniaxial compression tests are carried out on cyan sandstone after different F-T cycles.The failure modes and damage evolution of cyan sandstone under F-T cycles are studied.In addition,from the perspective of fracture and pore volume,the calculation equations of rock strain under frost heaving pressure and F-T cycles are established and verified with the corresponding laboratory tests.Subsequently,based on the classical damage theory,the F-T damage variables of cyan sandstone under different F-T cycles are calculated,and the meso-damage calculation model of cyan sandstone under F-T-loading coupling conditions is derived.Furthermore,through the discrete element numerical simulation software(PFC^(3D)),the microscopic damage evolution process of cyan sandstone under uniaxial compression after F-T cycles is studied,including the change of microcracks number,distribution of microcracks,and the acoustic emission(AE)count.The goal of this study is to investigate the damage evolution mechanism of rock from the mesoscopic and microscopic aspects,which has certain guiding value for accurately understanding the damage characteristics of rock in cold regions.
