Two novel adaptive distributed target detectors, the range frequency domain-Rao (RFD-Rao) and range frequency domain-Wald (RFD-Wald) tests are proposed in this work. The application methods for these tests consider a ...Two novel adaptive distributed target detectors, the range frequency domain-Rao (RFD-Rao) and range frequency domain-Wald (RFD-Wald) tests are proposed in this work. The application methods for these tests consider a partially homogeneous disturbance environment and a target range walking effect in a coherent processing interval (CPI). The asymptotic performance of the detectors is analyzed, and the constant false alarm rate (CFAR) properties with respect to the clutter covariance matrix and power level are shown. The performances of the proposed adaptive detectors are assessed through Monte-Carlo simulations, and the results are presented to demonstrate the effectiveness of the proposed detection algorithms compared to those of similar existing detectors.展开更多
The normal compression tests on intact samples and artificial joints with different saw-tooth shape under cyclic loading and half-sine waves of different frequencies were performed by using Instron1342 servo-controlle...The normal compression tests on intact samples and artificial joints with different saw-tooth shape under cyclic loading and half-sine waves of different frequencies were performed by using Instron1342 servo-controlled material testing machine. The specimens were made artificially with mortar. The loading frequency ranged from 0.005 Hz to 0.1 Hz. The experimental results show that joint closure curves are non-linear and concave up. The stress-deformation curves under cyclic loading exhibit hysteresis and permanent set that diminish rapidly and keep constant finally on successive cycles. Normal displacement successively decreases from the joint J1 to J2, to J3 under the same normal loads regardless of frequency. Considering the loading frequency effect, normal displacement of joint J1 decreases with increasing the loading frequency except that the loading frequency is 0.05 Hz. Normal displacement of joint J2 increases with increasing the loading frequency. Normal displacement of joint J3 increases with increasing the loading frequency when the frequency ranges from 0.005 Hz to 0.05 Hz. Its normal displacement, however, becomes least when the loading frequency is 0.1 Hz.展开更多
基金Project(61771367)supported by the National Natural Science Foundation of China
文摘Two novel adaptive distributed target detectors, the range frequency domain-Rao (RFD-Rao) and range frequency domain-Wald (RFD-Wald) tests are proposed in this work. The application methods for these tests consider a partially homogeneous disturbance environment and a target range walking effect in a coherent processing interval (CPI). The asymptotic performance of the detectors is analyzed, and the constant false alarm rate (CFAR) properties with respect to the clutter covariance matrix and power level are shown. The performances of the proposed adaptive detectors are assessed through Monte-Carlo simulations, and the results are presented to demonstrate the effectiveness of the proposed detection algorithms compared to those of similar existing detectors.
基金Projects(50490274 50490272) supported by the National Natural Science Foundation of ChinaProject(2002CB412703) supported by theNational Basic Research Program of China
文摘The normal compression tests on intact samples and artificial joints with different saw-tooth shape under cyclic loading and half-sine waves of different frequencies were performed by using Instron1342 servo-controlled material testing machine. The specimens were made artificially with mortar. The loading frequency ranged from 0.005 Hz to 0.1 Hz. The experimental results show that joint closure curves are non-linear and concave up. The stress-deformation curves under cyclic loading exhibit hysteresis and permanent set that diminish rapidly and keep constant finally on successive cycles. Normal displacement successively decreases from the joint J1 to J2, to J3 under the same normal loads regardless of frequency. Considering the loading frequency effect, normal displacement of joint J1 decreases with increasing the loading frequency except that the loading frequency is 0.05 Hz. Normal displacement of joint J2 increases with increasing the loading frequency. Normal displacement of joint J3 increases with increasing the loading frequency when the frequency ranges from 0.005 Hz to 0.05 Hz. Its normal displacement, however, becomes least when the loading frequency is 0.1 Hz.
