期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
粗煤泥分选工艺在安家岭选煤厂的应用 被引量:27
1
作者 王正书 周学东 《洁净煤技术》 CAS 2012年第3期7-9,共3页
从原煤性质变化对产品结构的影响,原有系统的工艺环节是否满足能力提升及工艺改造对选煤厂生产的影响3个方面分析了安家岭选煤厂采用粗煤泥分选工艺进行扩能改造的可行性。对比分析了安家岭选煤厂改造前后的工艺流程,并对改造后的效果... 从原煤性质变化对产品结构的影响,原有系统的工艺环节是否满足能力提升及工艺改造对选煤厂生产的影响3个方面分析了安家岭选煤厂采用粗煤泥分选工艺进行扩能改造的可行性。对比分析了安家岭选煤厂改造前后的工艺流程,并对改造后的效果进行了分析。结果表明:TBS粗煤泥分选提高了系统处理能力,减轻了浓缩机负荷,保证了加压过滤机、浓缩机的稳定生产,提高了主再选重介质旋流器分选下限,减少了细泥在系统中的积聚,提高了脱介筛的脱介效果、处理能力,改善了末煤离心机的脱水效果,降低了介质损耗;正常生产时,TBS分选密度设定为1.20~1.25 g/cm3,顶水压力设定为95 L/min;选煤厂单系统处理能力由原先的750 t/h增至850 t/h,精煤产率提高了2.92%,每月增加利润700.80万元。 展开更多
关键词 粗煤泥分选 TBS 分选密度 顶水压力 精煤产率
在线阅读 下载PDF
影响FBS流化床分选机分选效果的因素分析
2
作者 张定智 汪才飞 +2 位作者 周建方 韩峰 仲硕硕 《煤炭加工与综合利用》 CAS 2021年第10期26-30,共5页
介绍了FBS流化床分选机的结构及工作原理;新河选煤厂通过分析FBS流化床分选机的影响因素,结合对入料、底流、溢流的技术检查,总结出溢流灰分的变化规律,正常生产时可根据变化规律及时调节FBS密度设定值和顶水压力;总结了FBS流化床分选... 介绍了FBS流化床分选机的结构及工作原理;新河选煤厂通过分析FBS流化床分选机的影响因素,结合对入料、底流、溢流的技术检查,总结出溢流灰分的变化规律,正常生产时可根据变化规律及时调节FBS密度设定值和顶水压力;总结了FBS流化床分选机的日常操作和维护中的一些做法和经验,确保了FBS流化床分选机运行工况良好。技术检查结果表明,分选机可以将精煤泥灰分控制在7.00%~9.00%,尾煤灰分控制在30.00%以上。 展开更多
关键词 粗精煤泥 FBS流化床分选机 床层密度 精煤回收率 顶水压力 入料粒度
在线阅读 下载PDF
MECHANICAL BEHAVIOUR OF MAIN FLOOR FOR WATER INRUSH IN LONGWALL MINING 被引量:3
3
作者 钱鸣高 缪协兴 黎良杰 《Journal of China University of Mining and Technology》 1995年第1期9-16,共8页
In this paper a new mechanica1 medel indicating the mechanical behaviour of main floor in longwall mining is proposed. In the medel the unfractured rnain floor is considered as an elasto plastic plate, and the combina... In this paper a new mechanica1 medel indicating the mechanical behaviour of main floor in longwall mining is proposed. In the medel the unfractured rnain floor is considered as an elasto plastic plate, and the combination of fractured blocks as a voussoir beam. Using the plastic hmit theory of plates, th limit load acting on rnain floor and the position of its largest deformation are gotten. The stability conditions for the key blocks of the voussoir beam are analysed by "S-R" stability theory. The results of the theoretical analysis are important for the study on the water inrush from seam floor. 展开更多
关键词 floor water inrush main floor fracture voussoir beam 'S-R' stability
在线阅读 下载PDF
Analysis and control on anomaly water inrush in roof of fully-mechanized mining field 被引量:3
4
作者 Peng Linjun Yang Xiaojie Sun Xiaoming 《Mining Science and Technology》 EI CAS 2011年第1期89-92,共4页
Caving of mine roofs from water inrush due to anomalous pressure is one of the major disasters and accidents that can occur in mines during production.Roof water inrush can trigger a wide range of roof collapse,causin... Caving of mine roofs from water inrush due to anomalous pressure is one of the major disasters and accidents that can occur in mines during production.Roof water inrush can trigger a wide range of roof collapse,causing major accidents from breaking roof supports while caving.These failures flood wells and do a great deal of damage to mines and endanger mine safety.Our objective is to analyze the anomalies of water inrush crushing the support at the #6301 working face in the Jisan Coal Mine of the Yanzhou Mining Group.Through information of water inrush to the roof,damage caused by tectonic movements,information on the damage caused by roof collapse and the theory about the distribution of pressure in mine abutments,we advice adjusting the length of the working face and the position of open-off cut relatively to the rich water area.In the case of anomalous roof pressure we should develop a state equation to estimate preventive measures with"transferring rock beam"theory.Simultaneously, we improve the capacity of drainage equipment and ensured adequate water retention at the storehouse. These are all major technologies to ensure the control and prevention against accidents caused by anomalous water inrush in roofs,thus ensuring safety in the production process of a coal mine. 展开更多
关键词 Roof Water inrush pressure Anomaly Analysis Control
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部