期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
多斜孔壁的非均匀孔排布优化设计及传热特性数值分析 被引量:2
1
作者 刘红梅 张勃 +3 位作者 吉洪湖 程明 王艳丽 吴敬华 《航空发动机》 2013年第1期56-60,73,共6页
为解决多斜孔壁应用于实际燃烧室时容易出现前端冷却效果较弱的问题,采用多斜孔非均匀孔排设计,对壁面前端的开孔分布规律进行了重点优化,采用数值模拟方法研究了不同孔排规律对冷却效果的影响。结果表明,非均匀孔排布设计可使流量分配... 为解决多斜孔壁应用于实际燃烧室时容易出现前端冷却效果较弱的问题,采用多斜孔非均匀孔排设计,对壁面前端的开孔分布规律进行了重点优化,采用数值模拟方法研究了不同孔排规律对冷却效果的影响。结果表明,非均匀孔排布设计可使流量分配规律得到优化,挖掘了壁面后端冷却气的冷却潜力,改善了壁面温度的均匀性,且控制在材料许用温度范围内;轴向温度梯度有所减小,同时冷却空气量明显减少;在开孔面积一定的前提下,采用增加孔数,减小孔径的方式能获得较佳的冷却效果。 展开更多
关键词 多斜 非均匀孔 壁面温度 冷却 流量分配 温度梯度
在线阅读 下载PDF
非均匀布孔缩短石门揭煤工期 被引量:1
2
作者 陈家祥 《矿业安全与环保》 2003年第b06期25-25,27,共2页
分析了均匀布孔防突措施所存在的问题,提出采用非均匀布孔,缩短揭煤工期的理论与做法,并介绍了实际应用效果。
关键词 均匀 揭煤工期 海孜煤矿 煤突出 瓦斯突出 预防措施 排放半径
在线阅读 下载PDF
冷却孔非均匀排布波纹板隔热屏冷却特性仿真
3
作者 梁喜源 刘海涌 +2 位作者 白晓辉 王子文 刘存良 《航空发动机》 北大核心 2023年第4期26-31,F0002,共7页
为了更加合理地分配冷却气体流量,提高纵向波纹板隔热屏结构的气膜冷却效率,提出了非均匀孔排布局波纹板隔热屏结构,即保持开孔率不变,构建了上游波纹结构气膜孔排布密集、下游波纹结构气膜孔排布稀疏的非均匀结构。在发动机真实工况下... 为了更加合理地分配冷却气体流量,提高纵向波纹板隔热屏结构的气膜冷却效率,提出了非均匀孔排布局波纹板隔热屏结构,即保持开孔率不变,构建了上游波纹结构气膜孔排布密集、下游波纹结构气膜孔排布稀疏的非均匀结构。在发动机真实工况下,采用数值仿真的方法研究了非均匀孔排方式对沿程冷却气体流量分配特性和气膜冷却特性的影响规律,揭示了振幅比变化对波纹板隔热屏冷却效果的影响规律。结果表明:前密后疏型非均匀孔排布局可以改变冷却气体在隔热屏不同位置处的出流量,从而显著提高隔热屏的气膜冷却效率。在气膜孔孔参数以及开孔率不变时,增大隔热屏上游孔排密度既可以提高隔热屏上游的冷却效果,又不会明显降低隔热屏下游的冷却效果,使隔热屏整体面平均气膜冷却效率有所提高,相比于均匀孔排结构,前密后疏孔排布局最高可使隔热屏面平均气膜冷却效率提高12.66%;在相同工况下,当振幅比从0.035增大至0.075时,隔热屏的面平均气膜冷却效率显著提高,最高可使其面平均气膜冷却效率提高16.32%。 展开更多
关键词 波纹板隔热屏 均匀排布冷却 振幅比 冷却气体流量 气膜冷却效率 加力燃烧室
在线阅读 下载PDF
Triaxial compression strength for artificial frozen clay with thermal gradient 被引量:2
4
作者 赵晓东 周国庆 陈国舟 《Journal of Central South University》 SCIE EI CAS 2013年第1期218-225,共8页
A series of triaxial compression tests for frozen clay were performed by KoDCGF (freezing with non-uniform temperature under loading after K0 consolidation) method and GFC (freezing with non-uniform temperature wit... A series of triaxial compression tests for frozen clay were performed by KoDCGF (freezing with non-uniform temperature under loading after K0 consolidation) method and GFC (freezing with non-uniform temperature without experiencing Ko consolidation) method at various confining pressures and thermal gradients. The experimental results indicate that the triaxial compression strength for frozen clay in KoDCGF test increases with the increase of confining pressure, but it decreases as the confining pressure increases further in GFC test. In other words, the compression strength for frozen clay with identical confining pressure decreases with the increase in thermal gradient both in KoDCGF test and GFC test. The strength of frozen clay in KoDCGF test is dependent of pore ice strength, soil particle strength and interaction between soil skeleton and pore ice. The decrease of water content and distance between soil particles leads to the decrease of pore size and the increase of contact area between particles in KoDCGF test, which further results in a higher compression strength than that in GFC test. The compression strength for frozen clay with thermal gradient can be descried by strength for frozen clay with a uniform temperature identical to the temperature at the height of specimen where the maximum tensile stress appears. 展开更多
关键词 artificial frozen clay triaxial compression test thermal gradient STRENGTH
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部