期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
An efficient strategy for the preparation of MIL-53(Al)-NH_(2)membranes with high ion selectivity and desalination performance
1
作者 Wenmin Li Zheng Liu +4 位作者 Xingya Li Rongqiang Fu Zhaoming Liu Tingting Xu Tongwen Xu 《中国科学技术大学学报》 CAS CSCD 北大核心 2024年第6期41-47,I0010,共8页
The efficient extraction of sodium(Na^(+))and lithium(Li^(+))from seawater and salt lakes is increasingly demanding due to their great application value in chemical industries.However,coexisting cations such as divale... The efficient extraction of sodium(Na^(+))and lithium(Li^(+))from seawater and salt lakes is increasingly demanding due to their great application value in chemical industries.However,coexisting cations such as divalent calcium(Ca^(2+))and magnesium(Mg^(2+))ions are at the subnanometer scale in diameter,similar to target monovalent ions,making ion separation a great challenge.Here,we propose a simple and fast secondary growth method for the preparation of MIL-53(Al)-NH_(2)membranes on the surface of anodic aluminum oxide.Such membranes contain angstrom-scale(~7Å)channels for the entrance of small monovalent ions and water molecules,endowing the selectivities for monovalent cations over divalent cations and water over salt molecules.The resulting high-connectivity MIL-53(Al)-NH_(2)membranes exhibit excellent ion separation performance(a selectivity of 121.42 for Na^(+)/Ca^(2+)and 93.81 for Li^(+)/Mg^(2+))and desalination performance(a water/salt selectivity of up to 5196).This work highlights metal–organic framework membranes as potential candidates for realizing ion separation and desalination in liquid treatment. 展开更多
关键词 metal-organic framework MIL-53(Al)-NH_(2) MEMBRANE ion selectivity DESALINATION
在线阅读 下载PDF
原位晶化法在铜网上快速合成Cu_3(BTC)_2基膜及其催化性能研究
2
作者 华成江 王明辉 +2 位作者 栾国有 刘岩 吴华 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2015年第5期529-534,共6页
在常温条件下,采用原位晶化法在铜网载体上合成了包含Keggin型杂多酸H3PMo12O40的Cu3(BTC)2(BTC=1,3,5-均苯三甲酸)基金属-有机框架膜材料。利用XRD、FT-IR和SEM等方法对膜的结构、成分及形貌进行了表征。含磷钼杂多酸的Cu3(BTC)2基薄... 在常温条件下,采用原位晶化法在铜网载体上合成了包含Keggin型杂多酸H3PMo12O40的Cu3(BTC)2(BTC=1,3,5-均苯三甲酸)基金属-有机框架膜材料。利用XRD、FT-IR和SEM等方法对膜的结构、成分及形貌进行了表征。含磷钼杂多酸的Cu3(BTC)2基薄膜均匀地覆盖在铜丝表面上,膜厚度约为8μm,晶体尺寸均一,且融合生长。合成过程中,经过预处理的铜网本身既是载体又是铜源。研究发现加入H2O2能有效地促进膜的合成。铜网负载的薄膜作为非均相催化剂,在H2O2氧化降解罗丹明B的化学反应中表现出很高的催化活性,反应100 min后,降解率可达98%。膜催化剂重复使用三次,均表现出较高的催化性能。 展开更多
关键词 金属-有机框架膜 原位晶化 铜网 杂多酸 罗丹明B降解 催化氧化
在线阅读 下载PDF
取向调控制备超薄MOF膜用于气体分离
3
作者 陈慧 刘玉涛 +1 位作者 李晋平 李立博 《太原理工大学学报》 CAS 北大核心 2023年第6期978-987,共10页
【目的】超薄无缺陷MOF膜的制备存在着巨大挑战。控制MOF膜的生长取向,有利于减少晶间缺陷并优化成膜厚度。【方法】首次采取聚多巴胺(PDA)中间层介导策略,在多孔基底上制备了具有一定取向的超薄UTSA-280 MOF膜。PDA层通过与金属离子的... 【目的】超薄无缺陷MOF膜的制备存在着巨大挑战。控制MOF膜的生长取向,有利于减少晶间缺陷并优化成膜厚度。【方法】首次采取聚多巴胺(PDA)中间层介导策略,在多孔基底上制备了具有一定取向的超薄UTSA-280 MOF膜。PDA层通过与金属离子的多重相互作用为UTSA-280提供了丰富的吸附、锚定位点,促进UTSA-280异相成核和生长。进一步通过改变PDA层的沉积量,可以调控成核密度和生长速率,从而调控MOF晶体的生长取向和厚度。【结果】最优化条件下制备的晶面(202)取向生长的UTSA-280 MOF膜厚为162 nm,其H_(2)渗透速率可达4141.8 GPU,H_(2)/CO_(2)分离选择性最高达18.5,远超2008年Robeson上限。 展开更多
关键词 金属-有机框架膜 气体分离 UTSA-280 取向生长 聚多巴胺
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部