The dynamic ground subsidence due to underground mining is a complicated time-dependent and rate- dependent process. Based. on the theory of rock rheology and probability integral method, this study developed the supe...The dynamic ground subsidence due to underground mining is a complicated time-dependent and rate- dependent process. Based. on the theory of rock rheology and probability integral method, this study developed the superposltlOn model for the prediction and analysis of the ground dynamic subsidence in mining area of thick !oose layer. The model consists of two parts （the prediction of overlying bedrock and the prediction of thick loose layer）. The overlying bedrock is regarded as visco-elastic beam, of which the dynamic subsidence is predicted by the Kelvin visco-elastic rheological model. The thick loose layer is regarded as random medium, and the ground dynamic subsidence, is predicted by the probability integral model. At last, the two prediction models are vertically stacked in the same coordinate system, and the bedrock dynamic subsidence is regarded as a variable mining thickness input into the prediction model of ground dynamic subsidence. The prediction results obtained were compared w^th actual movement and deformation data from Zhao I and Zhao II mine, central China. The agreement of the prediction results with the. field measurements.show that the superposition model （SM） is more satisfactory and the formulae obtained are more effective than the classical single probability Integral model（SPIM）, and thus can be effectively used for predicting the ground dynamic subsidence in mining area of thick loose layer.展开更多
Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surfac...Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surface blast design. The purpose of presplitting is to form a fracture plane across which the radial cracks from the production blast cannot travel. The purpose of this study is to investigate of effect of presplitting on the generation of a smooth wall in continuum and jointed rock mass. The 2D distinct element code was used to simulate the presplitting in a rock slope. The blast load history as a function of time was applied to the inner wall of each blasthole. Important parameters that were considered in the analysis were stress tensor and fracturing pattern. The blast loading magnitude and blasthole spacing and jointing pattern were found to be very significant in the final results.展开更多
Limitations exist in applying discounted cash flow and analogy sales methods to evaluate mining titles. In order to find a more appropriate way of evaluating mining titles, the Black-Scholes model is discussed in this...Limitations exist in applying discounted cash flow and analogy sales methods to evaluate mining titles. In order to find a more appropriate way of evaluating mining titles, the Black-Scholes model is discussed in this paper. The authors pay particular attention to the determination of the time to maturity of the option on the basis of characteristics of the mining industry, pointing out that a reasonable time to maturity of the option should be the remaining time after deducting the essential time, needed by exploitation of the mineral resources within the mining property, from the life of the mining title. Several conclusions, related to the exercise of mineral resource management, are drawn from a case study analysis; extending the life of a mining title within a certain range could increase the revenue to the seller of the mining title. Application of the Black-Scholes model to evaluate mining titles would encourage an expansion of the scale of production.展开更多
The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/...The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/LS-DYNA 3D Nonlinear Dynamic Finite Element Software. In this package ANSYS is the preprocessor and LS-DYNA is the postprocessor. Numerical models in the paper to actual were l：10 and the element mesh was dissected in scanning mode utilizing the symmetry characteristics of the numerical model. Five different advance rates were studied. Parameters, such as the time required to maximum stress, the action time of the available stress, the maximum velocity of the nodes, the stress penetration time, the magnitude of the stress peak and the time duration for high stress were numerically simulated. The 2.2 m advance appeared optimum from an analysis of the simulation results. The results from numerical simulation have been validated by tests with physical models.展开更多
Rope shovels are used to dig and load materials in surface mines. One of the main factors that influence the production rate and energy consumption of rope shovels is the performance of the operator. This paper presen...Rope shovels are used to dig and load materials in surface mines. One of the main factors that influence the production rate and energy consumption of rope shovels is the performance of the operator. This paper presents a method for evaluating rope shovel operators using the Multi-Attribute Decision-Making （MADM） model. Data used in this research were collected from an operating surface coal mine in the southern United States. The MADM model consists of attributes, their weights of importance, and alter- natives. Shovel operators are considered the alternatives, The energy consumption model was developed with multiple regression analysis, and its variables were included in the MADM model as attributes. Preferences with respect to min/max of the defined attributes were obtained with multi-objective opti- mization. Multi-objective optimization was conducted with the overall goal of minimizing energy con- sumption and maximizing production rate. Weights of importance of the attributes were determined by the Analytical Hierarchy Process （AHP）, The overall evaluation of operators was performed by one of the MADM models, i.e., PROMETHEE If. The research results presented here may be used by mining professionals to held evaluate the performance of rode shovel operators in surface mining.展开更多
When mining the fully-mechanized longwall caving face along strike, the unstable equipment, the low top-coal recovery ratio and the difficulty in controlling surrounding rock may occur due to large dip angle. Consider...When mining the fully-mechanized longwall caving face along strike, the unstable equipment, the low top-coal recovery ratio and the difficulty in controlling surrounding rock may occur due to large dip angle. Considering the effects of strike angle on support stability, the ‘‘support-surrounding rock"mechanical models of support topple and support slip were established in this paper. On the basis, the influencing factors of support stability were analyzed and the technical measures of controlling support and surrounding rock stability were put forward. Then the loose particles simulation experiment was conducted to analyze the impacts of caving directions and methods on the top-coal recovery in large dip angle fully-mechanized caving face. Finally, the ‘‘upward sequence and double-openings doublerounds" caving technology was determined. The research results are of great scientific significance and practical values to improve large dip thick seam mining technology.展开更多
In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from ...In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from the Central Appalachian region is used as a case study.At this mine,unexpected roof conditions were encountered during development below previously mined panels.Stress mapping and observation of ground conditions were used to quantify the success of entry support systems in three room-and-pillar panels.Numerical model analyses were initially conducted to estimate the stresses induced by the multiple-seam mining at the locations of the affected entries.The SRM was used to quantify the stability factor of the supported roof of the entries at selected locations.The SRM-calculated stability factors were compared with observations made during the site visits,and the results demonstrate that the SRM adequately identifies the unexpected roof conditions in this complex case.It is concluded that the SRM can be used to effectively evaluate the likely success of roof supports and the stability condition of entries in coal mines.展开更多
Based on radon gas properties and its existing projects applications, we firstly attempted to apply geo- physical and chemical properties of radon gas in the field of mining engineering, and imported radioac- tive mea...Based on radon gas properties and its existing projects applications, we firstly attempted to apply geo- physical and chemical properties of radon gas in the field of mining engineering, and imported radioac- tive measurement method to detect the development process of the overlying strata mining-induced fractures and their contained water quality in underground coal mining, which not only innovates a more simple-fast-reliable detection method, but also further expands the applications of radon gas detection technology in mining field. A 3D simulation design of comprehensive testing system for detecting strata mining-induced fractures on surface with radon gas (CTSR) was carried out by using a large-scale 3D solid model design software Pro/Engineer (Pro/E), which overcame three main disadvantages of ''static design thought, 2D planar design and heavy workload for remodification design'' on exiting design for mining engineering test systems. Meanwhile, based on the simulation design results of Pro/E software, the sta- bility of the jack-screw pressure bar for the key component in CTSR was checked with a material mechan- ics theory, which provided a reliable basis for materials selection during the latter machining process.展开更多
The surface deformation after fully mechanized back filling mining was analyzed.The surface deformation for different backfill materials was predicted by an equivalent mining height model and numerical simulations.The...The surface deformation after fully mechanized back filling mining was analyzed.The surface deformation for different backfill materials was predicted by an equivalent mining height model and numerical simulations.The results suggest that:(1) As the elastic modulus,E,of the backfill material increases the surface subsidence decreases.The rate of subsidence decrease drops after E is larger than 5 GPa;(2) Fully mechanized back fill mining technology can effectively control surface deformation.The resulting surface deformation is within the specification grade I,which means surface maintenance is not needed.A site survey showed that the equivalent mining height model is capable of predicting and analyzing surface deformation and that the model is conservative enough for engineering safety.Finally,the significance of establishing a complete error correction system based on error analysis and correction is discussed.展开更多
An optimal layout or three-dimensional spatial distribution of stopes guarantees the maximum profitability over life span of an underground mining operation.Thus,stope optimization is one of the key areas in undergrou...An optimal layout or three-dimensional spatial distribution of stopes guarantees the maximum profitability over life span of an underground mining operation.Thus,stope optimization is one of the key areas in underground mine planning practice.However,the computational complexity in developing an optimal stope layout has been a reason for limited availability of the algorithms offering solution to this problem.This article shares a new and efficient heuristic algorithm that considers a three-dimensional ore body model as an input,maximizes the economic value,and satisfies the physical mining and geotechnical constraints for generating an optimal stope layout.An implementation at a copper deposit demonstrates the applicability and robustness of the algorithm.A parallel processing based modification improving the performance of the original algorithm in terms of enormous computational time saving is also presented.展开更多
In this paper a comprehensive review is presented of risk assessment techniques adopted in the mining industry worldwide;those techniques applied in other hazardous industries and potential techniques which are robust...In this paper a comprehensive review is presented of risk assessment techniques adopted in the mining industry worldwide;those techniques applied in other hazardous industries and potential techniques which are robust,mature and holistic and can be implemented for the Indian mining industry in future to enhance workplace safety are also presented.Findings from the review are indicative of the fact that socio-technical complexity of industrial systems has increased.Recent developments in the area of risk management highlight the need for implementation of the latest robust techniques of risk assessment in the mining sector.In consideration of the present scenario,the development of a model for risk analysis having an interface between hazard identification and risk assessment,along with an interface between risk assessment and accident causation to predict if an accident will occur under given conditions,has become dire necessity.This will increase hazard awareness and enable mine management to select and prioritize problem areas and identify safety system weaknesses in both underground and surface mining.This will ultimately help decision makers,risk analysts and safety managers make a major contribution in the development of workplace safety with a near-to-zero accident rate.展开更多
基金provided by the National Natural Science Foundation of China Youth Found of China (No.41102169)the doctoral foundation of Henan Polytechnic University of China (No. B2014-056)
文摘The dynamic ground subsidence due to underground mining is a complicated time-dependent and rate- dependent process. Based. on the theory of rock rheology and probability integral method, this study developed the superposltlOn model for the prediction and analysis of the ground dynamic subsidence in mining area of thick !oose layer. The model consists of two parts （the prediction of overlying bedrock and the prediction of thick loose layer）. The overlying bedrock is regarded as visco-elastic beam, of which the dynamic subsidence is predicted by the Kelvin visco-elastic rheological model. The thick loose layer is regarded as random medium, and the ground dynamic subsidence, is predicted by the probability integral model. At last, the two prediction models are vertically stacked in the same coordinate system, and the bedrock dynamic subsidence is regarded as a variable mining thickness input into the prediction model of ground dynamic subsidence. The prediction results obtained were compared w^th actual movement and deformation data from Zhao I and Zhao II mine, central China. The agreement of the prediction results with the. field measurements.show that the superposition model （SM） is more satisfactory and the formulae obtained are more effective than the classical single probability Integral model（SPIM）, and thus can be effectively used for predicting the ground dynamic subsidence in mining area of thick loose layer.
文摘Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surface blast design. The purpose of presplitting is to form a fracture plane across which the radial cracks from the production blast cannot travel. The purpose of this study is to investigate of effect of presplitting on the generation of a smooth wall in continuum and jointed rock mass. The 2D distinct element code was used to simulate the presplitting in a rock slope. The blast load history as a function of time was applied to the inner wall of each blasthole. Important parameters that were considered in the analysis were stress tensor and fracturing pattern. The blast loading magnitude and blasthole spacing and jointing pattern were found to be very significant in the final results.
基金Project 50074031 supported by National Natural Science Foundation of China
文摘Limitations exist in applying discounted cash flow and analogy sales methods to evaluate mining titles. In order to find a more appropriate way of evaluating mining titles, the Black-Scholes model is discussed in this paper. The authors pay particular attention to the determination of the time to maturity of the option on the basis of characteristics of the mining industry, pointing out that a reasonable time to maturity of the option should be the remaining time after deducting the essential time, needed by exploitation of the mineral resources within the mining property, from the life of the mining title. Several conclusions, related to the exercise of mineral resource management, are drawn from a case study analysis; extending the life of a mining title within a certain range could increase the revenue to the seller of the mining title. Application of the Black-Scholes model to evaluate mining titles would encourage an expansion of the scale of production.
文摘The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/LS-DYNA 3D Nonlinear Dynamic Finite Element Software. In this package ANSYS is the preprocessor and LS-DYNA is the postprocessor. Numerical models in the paper to actual were l：10 and the element mesh was dissected in scanning mode utilizing the symmetry characteristics of the numerical model. Five different advance rates were studied. Parameters, such as the time required to maximum stress, the action time of the available stress, the maximum velocity of the nodes, the stress penetration time, the magnitude of the stress peak and the time duration for high stress were numerically simulated. The 2.2 m advance appeared optimum from an analysis of the simulation results. The results from numerical simulation have been validated by tests with physical models.
文摘Rope shovels are used to dig and load materials in surface mines. One of the main factors that influence the production rate and energy consumption of rope shovels is the performance of the operator. This paper presents a method for evaluating rope shovel operators using the Multi-Attribute Decision-Making （MADM） model. Data used in this research were collected from an operating surface coal mine in the southern United States. The MADM model consists of attributes, their weights of importance, and alter- natives. Shovel operators are considered the alternatives, The energy consumption model was developed with multiple regression analysis, and its variables were included in the MADM model as attributes. Preferences with respect to min/max of the defined attributes were obtained with multi-objective opti- mization. Multi-objective optimization was conducted with the overall goal of minimizing energy con- sumption and maximizing production rate. Weights of importance of the attributes were determined by the Analytical Hierarchy Process （AHP）, The overall evaluation of operators was performed by one of the MADM models, i.e., PROMETHEE If. The research results presented here may be used by mining professionals to held evaluate the performance of rode shovel operators in surface mining.
基金provided by the National Key Basic Research Program of China (973 Program) (No. 2015CB251600)the Qing Lan Projectthe Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘When mining the fully-mechanized longwall caving face along strike, the unstable equipment, the low top-coal recovery ratio and the difficulty in controlling surrounding rock may occur due to large dip angle. Considering the effects of strike angle on support stability, the ‘‘support-surrounding rock"mechanical models of support topple and support slip were established in this paper. On the basis, the influencing factors of support stability were analyzed and the technical measures of controlling support and surrounding rock stability were put forward. Then the loose particles simulation experiment was conducted to analyze the impacts of caving directions and methods on the top-coal recovery in large dip angle fully-mechanized caving face. Finally, the ‘‘upward sequence and double-openings doublerounds" caving technology was determined. The research results are of great scientific significance and practical values to improve large dip thick seam mining technology.
文摘In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from the Central Appalachian region is used as a case study.At this mine,unexpected roof conditions were encountered during development below previously mined panels.Stress mapping and observation of ground conditions were used to quantify the success of entry support systems in three room-and-pillar panels.Numerical model analyses were initially conducted to estimate the stresses induced by the multiple-seam mining at the locations of the affected entries.The SRM was used to quantify the stability factor of the supported roof of the entries at selected locations.The SRM-calculated stability factors were compared with observations made during the site visits,and the results demonstrate that the SRM adequately identifies the unexpected roof conditions in this complex case.It is concluded that the SRM can be used to effectively evaluate the likely success of roof supports and the stability condition of entries in coal mines.
基金support for this work provided by the Fundamental Research Funds for the Central Universities(China University of Mining & Technology) (No. 2010ZDP02B02)the State Key Laboratory of Coal Resources and Safe Mining(No. SKLCRSM08X02)
文摘Based on radon gas properties and its existing projects applications, we firstly attempted to apply geo- physical and chemical properties of radon gas in the field of mining engineering, and imported radioac- tive measurement method to detect the development process of the overlying strata mining-induced fractures and their contained water quality in underground coal mining, which not only innovates a more simple-fast-reliable detection method, but also further expands the applications of radon gas detection technology in mining field. A 3D simulation design of comprehensive testing system for detecting strata mining-induced fractures on surface with radon gas (CTSR) was carried out by using a large-scale 3D solid model design software Pro/Engineer (Pro/E), which overcame three main disadvantages of ''static design thought, 2D planar design and heavy workload for remodification design'' on exiting design for mining engineering test systems. Meanwhile, based on the simulation design results of Pro/E software, the sta- bility of the jack-screw pressure bar for the key component in CTSR was checked with a material mechan- ics theory, which provided a reliable basis for materials selection during the latter machining process.
基金provided by the National Natural Science Foundation of China (Nos. 51074165 and 50834004)
文摘The surface deformation after fully mechanized back filling mining was analyzed.The surface deformation for different backfill materials was predicted by an equivalent mining height model and numerical simulations.The results suggest that:(1) As the elastic modulus,E,of the backfill material increases the surface subsidence decreases.The rate of subsidence decrease drops after E is larger than 5 GPa;(2) Fully mechanized back fill mining technology can effectively control surface deformation.The resulting surface deformation is within the specification grade I,which means surface maintenance is not needed.A site survey showed that the equivalent mining height model is capable of predicting and analyzing surface deformation and that the model is conservative enough for engineering safety.Finally,the significance of establishing a complete error correction system based on error analysis and correction is discussed.
文摘An optimal layout or three-dimensional spatial distribution of stopes guarantees the maximum profitability over life span of an underground mining operation.Thus,stope optimization is one of the key areas in underground mine planning practice.However,the computational complexity in developing an optimal stope layout has been a reason for limited availability of the algorithms offering solution to this problem.This article shares a new and efficient heuristic algorithm that considers a three-dimensional ore body model as an input,maximizes the economic value,and satisfies the physical mining and geotechnical constraints for generating an optimal stope layout.An implementation at a copper deposit demonstrates the applicability and robustness of the algorithm.A parallel processing based modification improving the performance of the original algorithm in terms of enormous computational time saving is also presented.
文摘In this paper a comprehensive review is presented of risk assessment techniques adopted in the mining industry worldwide;those techniques applied in other hazardous industries and potential techniques which are robust,mature and holistic and can be implemented for the Indian mining industry in future to enhance workplace safety are also presented.Findings from the review are indicative of the fact that socio-technical complexity of industrial systems has increased.Recent developments in the area of risk management highlight the need for implementation of the latest robust techniques of risk assessment in the mining sector.In consideration of the present scenario,the development of a model for risk analysis having an interface between hazard identification and risk assessment,along with an interface between risk assessment and accident causation to predict if an accident will occur under given conditions,has become dire necessity.This will increase hazard awareness and enable mine management to select and prioritize problem areas and identify safety system weaknesses in both underground and surface mining.This will ultimately help decision makers,risk analysts and safety managers make a major contribution in the development of workplace safety with a near-to-zero accident rate.
