期刊文献+
共找到17篇文章
< 1 >
每页显示 20 50 100
模块化卫星的多螺杆连接分析 被引量:2
1
作者 杨新峰 张晓敏 张立华 《航天器工程》 2014年第1期41-46,共6页
相对于单螺栓连接或平均受力的多螺栓连接,模块化卫星的多根螺杆连接涉及被连接件的非均匀连接刚度,各螺杆处的不同连接刚度的耦合作用与影响还有待深入分析。本文基于单螺栓的载荷分析方法,通过计算被连接件的连接刚度矩阵参数,并融入... 相对于单螺栓连接或平均受力的多螺栓连接,模块化卫星的多根螺杆连接涉及被连接件的非均匀连接刚度,各螺杆处的不同连接刚度的耦合作用与影响还有待深入分析。本文基于单螺栓的载荷分析方法,通过计算被连接件的连接刚度矩阵参数,并融入到螺杆载荷分析中,从而得到计算螺杆直径与预紧力的公式。最后,给出一个模块化卫星多螺杆连接分析的算例,计算结果显示,使用M3钛螺杆、每个螺杆施加最小1Nm拧紧力矩,可以满足此模块化卫星的使用要求。 展开更多
关键词 模块化卫星 连接分析 螺杆 连接刚度 预紧力
在线阅读 下载PDF
基于失败连接分析和P2P的未知网络蠕虫检测 被引量:1
2
作者 杨盛明 李伟华 《电子设计工程》 2013年第13期142-146,共5页
针对现有的网络蠕虫检测系统大多不能有效快速检测慢速蠕虫的问题,本文提出使用本地失败连接分析(LF-CA)算法在蠕虫传播早期高效实时的检测本地局域网内的蠕虫,并在全局上建立可扩展性强非集中式的基于Chord算法的全网协作P2P检测机制,... 针对现有的网络蠕虫检测系统大多不能有效快速检测慢速蠕虫的问题,本文提出使用本地失败连接分析(LF-CA)算法在蠕虫传播早期高效实时的检测本地局域网内的蠕虫,并在全局上建立可扩展性强非集中式的基于Chord算法的全网协作P2P检测机制,以信息共享的方式对慢速传播蠕虫进行检测。通过实验仿真验证了LFCA算法对本地网络的快速蠕虫有高效的检测效果和较低的误报率,证明了基于P2P技术进行信息共享协同检测比单点检测能更快更有效地检测到慢速蠕虫。 展开更多
关键词 蠕虫检测 失败连接分析 信息共享 对等网络
在线阅读 下载PDF
民用飞机机身复材-金属壁板混合连接结构的试验与分析 被引量:2
3
作者 韩建 汪远 +1 位作者 梁珩 李卫平 《应用力学学报》 CAS CSCD 北大核心 2023年第4期761-768,共8页
民用飞机复材壁板与金属壁板的连接是机身结构设计的重要研究内容,如何将复材帽形长桁和金属Z形/2形长桁连接是研究的重点和难点。本研究提出了一种新型混合连接结构,同时考虑了预埋缺陷和BVID损伤对试验件的影响。通过试验、数值仿真... 民用飞机复材壁板与金属壁板的连接是机身结构设计的重要研究内容,如何将复材帽形长桁和金属Z形/2形长桁连接是研究的重点和难点。本研究提出了一种新型混合连接结构,同时考虑了预埋缺陷和BVID损伤对试验件的影响。通过试验、数值仿真等分析方法研究了混合连接结构的静强度特性,详细分析了试验件的受力情况、失效模式以及破坏位置,很好的解决了复材帽形长桁和金属Z形/2形长桁连接载荷传递问题。研究结果表明:该混合连接结构满足民用飞机结构与强度的设计要求,预埋缺陷和BVID损伤对试验件的破坏载荷和破坏模式无影响。以上研究结果为型号飞机的研制和发展提供重要的指导作用。 展开更多
关键词 混合连接 复材壁板 连接分析
在线阅读 下载PDF
梁柱连接节点不同腹板切角构造形式的应力分析 被引量:2
4
作者 江磊 王秀丽 杨文伟 《兰州理工大学学报》 CAS 北大核心 2013年第2期106-109,共4页
地震中钢框架的破坏大量表现为梁柱连接节点的破坏,其破坏形式和破坏性质与节点细部构造密切相关,梁柱连接节点不同腹板切角构造形式(又称作工艺孔)是主要影响因素之一.借助有限元技术,对梁柱栓焊混合连接节点中不同腹板切角构造形式进... 地震中钢框架的破坏大量表现为梁柱连接节点的破坏,其破坏形式和破坏性质与节点细部构造密切相关,梁柱连接节点不同腹板切角构造形式(又称作工艺孔)是主要影响因素之一.借助有限元技术,对梁柱栓焊混合连接节点中不同腹板切角构造形式进行研究,揭示不同切角形式切角部位应力集中程度及应力分布规律,又通过对4种不同腹板切角构造形式节点的滞回性能分析,综合得出圆弧Ⅱ形切角及扇形切角为较理想的切角形式. 展开更多
关键词 梁柱连接节点 切角形式I应力分析 ANSYS
在线阅读 下载PDF
DSS2点到多点信令呼叫连接/释放过程分析
5
作者 王喆 罗进文 《兰州交通大学学报》 CAS 2004年第1期79-82,共4页
在DSS2点到点信令呼叫连接/释放过程分析的基础上介绍DSS2点对多点呼叫连接/释放控制中的定时器和状态及点对多点通信消息,以通信过程中增加一方用户的呼叫建立与释放过程为例分析DSS2点对多点呼叫/连接控制过程.
关键词 通信系统 DSS2 点对多点呼叫 定时器 信号连接/释放分析
在线阅读 下载PDF
针刺临床研究中常用的Rs-fMRI分析方法:10年概况 被引量:9
6
作者 高璇 鲁海 +1 位作者 高霄英 张春红 《分子影像学杂志》 2020年第4期568-571,共4页
Rs-fMRI是一种用于针刺临床中研究脑部活动的一种科学放法,Rs-fMRI分析方法可以辅助研究者得出研究结论,从而反馈于临床实践中。Rs-fMRI分析方法在近十年针刺临床研究中常用的有3种:局部一致性(ReHo)、低频振幅分析(ALFF)、功能连接性分... Rs-fMRI是一种用于针刺临床中研究脑部活动的一种科学放法,Rs-fMRI分析方法可以辅助研究者得出研究结论,从而反馈于临床实践中。Rs-fMRI分析方法在近十年针刺临床研究中常用的有3种:局部一致性(ReHo)、低频振幅分析(ALFF)、功能连接性分析(FC)。ReHo在针刺研究中可用于研究某穴位激活或抑制,某个脑区或某几个脑区,从而得出该穴位的靶效应脑区,为研究“穴位-脑-疾病”打下基础;ALFF可直接反映局部神经元自发同步化神经活动的强度,在一定程度上反映各相关脑区间的相互作用和神经网络连接;FC可以得出脑区之间的功能连接,即脑区间的“高速路”,其简单易懂,结果直接。运用不同的分析方法可以显示针刺不同穴位的脑部活动,如局部神经活动的同步性、相邻脑区之间的连接性及大脑的自发波动及功能活动等。本文将阐述ReHo、ALFF、FC 3种分析方法在针刺研究中的适用研究方向。 展开更多
关键词 针刺 功能核磁 Rs-fMRI 局部一致性 低频振幅分析 功能连接分析
在线阅读 下载PDF
浅析JCP-8/600型卡轨机车轮毂连接方式
7
作者 何勇义 《陕西煤炭》 2014年第2期130-131,共2页
根据黄陵矿区卡轨机车运输情况和存在的主要问题,对目前机车轮毂与轮圈的几种连接方式进行了分析对比,并对圆轮连接方式提出了改进意见,对齿轮连接方式参数进行了合理优化,以求选择良好合理的轮毂连接方式减少事故,提高机车运输效率。
关键词 机车轮毂连接分析 改进 探讨
在线阅读 下载PDF
针对韩国语教育的"■■■■■■"连接词汇目录选定研究 被引量:2
8
作者 唐颖聪 《韩国语教学与研究》 2020年第2期65-72,共8页
本文主要针对韩国语教育中出现的惯用型“■■■■■■”进行分析,并对与此相连的词汇进行分类抽取。首先对现有的词典、教材进行分析,同时通过语料库和先行研究分析法抽取出与此相连的词汇,并且抽取出词典中出现的“■■■■■■”连... 本文主要针对韩国语教育中出现的惯用型“■■■■■■”进行分析,并对与此相连的词汇进行分类抽取。首先对现有的词典、教材进行分析,同时通过语料库和先行研究分析法抽取出与此相连的词汇,并且抽取出词典中出现的“■■■■■■”连接词汇,最后结合韩国国立国语院的研究报告抽取出适合韩国语教育的词汇。 展开更多
关键词 韩国语教育:“■■■■■■” 连接词汇:语料库和先行研究分析
在线阅读 下载PDF
基于FIFA的主题相似性计算模型 被引量:3
9
作者 朱靖波 陈文亮 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2003年第11期1041-1044,共4页
针对主题检测和追踪的第五个技术任务连接分析,提出了一种事件主题相似性分析技术·通过引入领域知识库,将基于词汇的分析技术提升到领域知识计算层面·当输入不同两个文档时,采用该分析技术进行识别文档内容所涉及到的事件主... 针对主题检测和追踪的第五个技术任务连接分析,提出了一种事件主题相似性分析技术·通过引入领域知识库,将基于词汇的分析技术提升到领域知识计算层面·当输入不同两个文档时,采用该分析技术进行识别文档内容所涉及到的事件主题是否一致·首先采用FIFA模型进行内容主题识别,然后采用LDM模型进行事件主题相似性计算分析·实验结果显示主题相似性计算正确率为64%,召回率为69%· 展开更多
关键词 内容主题识别 事件主题分析 主题检测和追踪 领域知识 连接分析
在线阅读 下载PDF
木葡聚糖纯化鉴定研究 被引量:1
10
作者 李兴军 樱井直树 《食品安全质量检测学报》 CAS 2012年第2期124-129,共6页
目的木葡聚糖(XG)是豆类、蔬菜及水果重要的半纤维素成分,本文探讨其纯化鉴定方法。方法从乙烯催熟猕猴桃果肉提取半纤维素Ⅱ(HC Ⅱ),采用碘沉淀,接着阴离子交换层析。结果将XG含量从HC-Ⅱ干粉中50摩尔%提高到纯化干粉中62摩尔%。纯化... 目的木葡聚糖(XG)是豆类、蔬菜及水果重要的半纤维素成分,本文探讨其纯化鉴定方法。方法从乙烯催熟猕猴桃果肉提取半纤维素Ⅱ(HC Ⅱ),采用碘沉淀,接着阴离子交换层析。结果将XG含量从HC-Ⅱ干粉中50摩尔%提高到纯化干粉中62摩尔%。纯化的XG中葡萄糖(Glc):木糖(Xyl):半乳糖(Gal):岩藻糖(Fuc)比例是10:6.9:2.1:0.3。凝胶过滤层析表明,纯化的XG平均分子量是161kDa,而聚合物总糖的平均分子量是95kDa。结论糖连接分析证实了猕猴桃XG缺乏岩藻糖(Fuc),有少量的阿拉伯木聚糖、低分子量的葡萄甘露聚糖与XG密切结合。 展开更多
关键词 木葡聚糖 葡萄甘露聚糖 木聚糖 半纤维素 植物细胞壁 连接甲基化分析
在线阅读 下载PDF
Fluid-structure coupled analysis of underwater cylindrical shells 被引量:1
11
作者 艾尚茂 孙丽萍 《Journal of Marine Science and Application》 2008年第2期77-81,共5页
Underwater cylindrical shell structures have been found a wide of application in many engineering fields, such as the element of marine, oil platforms, etc. The coupled vibration analysis is a hot issue for these unde... Underwater cylindrical shell structures have been found a wide of application in many engineering fields, such as the element of marine, oil platforms, etc. The coupled vibration analysis is a hot issue for these underwater structures. The vibration characteristics of underwater structures are influenced not only by hydrodynamic pressure but also by hydrostatic pressure corresponding to different water depths. In this study, an acoustic finite element method was used to evaluate the underwater structures. Taken the hydrostatic pressure into account in terms of initial stress stiffness, an acoustical fluid-structure coupled analysis of underwater cylindrical shells has been made to study the effect of hydrodynamic pressures on natural frequency and sound radiation. By comparing with the frequencies obtained by the acoustic finite element method and by the added mass method based on the Bessel function, the validity of present analysis was checked. Finally, test samples of the sound radiation of stiffened cylindrical shells were acquired by a harmonic acoustic analysis. The results showed that hydrostatic pressure plays an important role in determining a large submerged body motion, and the characteristics of sound radiation change with water depth. Furthermore, the analysis methods and the results are of significant reference value for studies of other complicated submarine structures. 展开更多
关键词 underwater structure fluid-structure coupled analysis initial stress natural frequency sound radiation
在线阅读 下载PDF
A Method on Extracting Network Connection Information from 64- bit Windows 7 Memory Images 被引量:3
12
作者 Wang Lianhai Xu Lijuan Zhang Shuhui 《China Communications》 SCIE CSCD 2010年第6期44-51,共8页
Memory analysis gains a weight in the area of computer live forensics.How to get network connection information is one of the challenges in memory analysis and plays an important role in identifying sources of malicio... Memory analysis gains a weight in the area of computer live forensics.How to get network connection information is one of the challenges in memory analysis and plays an important role in identifying sources of malicious cyber attack. It is more difficult to fred the drivers and get network connections information from a 64-bit windows 7 memory image file than from a 32-bit operating system memory image f'de. In this paper, an approach to fred drivers and get network connection information from 64-bit windows 7 memory images is given. The method is verified on 64-bit windows 7 version 6.1.7600 and proved reliable and efficient. 展开更多
关键词 computer forensics computer live forensics memory analysis digital forensics
在线阅读 下载PDF
Impacts of Packet Collisions on Link Throughput in CSMA Wireless Networks 被引量:3
13
作者 Caihong Kai Shengli Zhang Lusheng Wang 《China Communications》 SCIE CSCD 2018年第3期1-14,共14页
It is known that packet collisions in wireless networks will deteriorate system performance, hence substantial efforts have been made to avoid collision in multi-user access designs. Also, there have been many studies... It is known that packet collisions in wireless networks will deteriorate system performance, hence substantial efforts have been made to avoid collision in multi-user access designs. Also, there have been many studies on throughput analysis of CSMA wireless networks. However, for a typical CSMA network in which not all nodes can sense each other, it is still not well investigated how link throughputs are affected by collisions. We note that in practical 802.11-like networks, the time is divided into mini-timeslots and packet collisions are in fact unavoidable. Thus, it is desirable to move forward to explore how collisions in such a network will affect system performance. Based on the collision-free ideal CSMA network(ICN) model, this paper attempts to analyze link throughputs when taking the backoff collisions into account and examine the effect of collisions on link throughputs. Specifically, we propose an Extended Ideal CSMA Network(EICN) model to characterize the collision effects as well as the interactions and dependency among links in the network. Based on EICN, we could directly compute link throughputs and collision probabilities. Simulations show that the EICN model is of high accuracy. Under various network topologies and protocol parameter settings, the computation error of link throughputs using EICN is kept to 4% or below. Interestingly, we find that unlike expected, the effect of collisions on link throughputs in a modest CSMA wireless network is not significant, which enriches our understanding on practical CSMA wireless networks such as Wi-Fi. 展开更多
关键词 CSMA protocol wireless net-works COLLISIONS throughput analysis
在线阅读 下载PDF
Stress analysis of three-dimensional finite element model of malunion calcaneus during gait
14
作者 刘立峰 蔡锦方 梁进 《Journal of Medical Colleges of PLA(China)》 CAS 2004年第1期27-30,共4页
Objective: To analyze the stress distribution of calcaneus with posterior articular facet compressed after fracture and talus during gait. Methods: A wedge under the posterior articular was transected from a normal fi... Objective: To analyze the stress distribution of calcaneus with posterior articular facet compressed after fracture and talus during gait. Methods: A wedge under the posterior articular was transected from a normal finite element model of calcaneus and talus to simulate malformation of compression of the posterior facet after fracture of calcaneus. The model was used to simulate for three subphases of the stance during the gait(heel strike, midstance, push off) and calculate the finite element. The results were compared with normal situation. Results: The stress distribution within the bone in situation of malformation was obtained and regions of elevated stresses for three subphases were located. The results were significantly different from that of normal situation. Conclusion: The simulation of calcaneus and talus in malformation has important clinic implication and can provide an insight into the factors contributing to many clinic pathogenic changes after fracture of calcaneus. 展开更多
关键词 finite element CALCANEUS TALUS FRACTURE stress analysis
在线阅读 下载PDF
Analysis and Modeling of k-regular and k-connected Protection Structure in Ultra-High Capacity Optical Networks
15
作者 LI Xin HUANG Shanguo +3 位作者 ZHANG Jie ZHAO Yongli GU Wanyi WANG Yang 《China Communications》 SCIE CSCD 2015年第3期106-119,共14页
This paper proposes k-regular and k-connected(k&k) structure against multifaults in ultra-high capacity optical networks.Theoretical results show that pre-configured k&k structure can reach the lower bound on ... This paper proposes k-regular and k-connected(k&k) structure against multifaults in ultra-high capacity optical networks.Theoretical results show that pre-configured k&k structure can reach the lower bound on logical redundancy.The switching time of k&k protection structure is as quickly as ringbased protection in SDH network.It is the optimal protection structure in ultra-high capacity optical networks against multi-faults.We develop the linear programming model for k&k structure and propose a construction method for k&k structure design.Simulations are conducted for spare spectrum resources effi ciency of the pre-confi gured k&k structure under multi-faults on representative COST239 and NSFnet topologies.Numerical results show that the spare spectrum resources efficiency of k&k structure can reach the lower bound on logical redundancy in static networks.And it can largely improve spare spectrum resources effi ciency compared with p-cycles based protection structure without reducing protection effi ciency under dynamic traffi cs. 展开更多
关键词 multi-faults k-regular and k-connected structure ultra-high capacity optical networks
在线阅读 下载PDF
HRB500级钢筋的工程应用
16
作者 杜巍 《建筑技术开发》 2010年第10期27-29,共3页
HRB500级钢筋是适用于混凝土结构、预应力混凝土结构的新型钢筋,通过工程实际应用,证明其具有优良性能,可保证工程质量并降低工程造价。
关键词 HRB500级钢筋 镦粗分析钢筋连接 镦粗电渣压力焊
在线阅读 下载PDF
佛山某住宅超限高层结构设计
17
作者 李高升 张帆 《安徽建筑》 2025年第4期70-75,共6页
佛山市某住宅项目3栋、4栋、5栋、6栋、7栋为高度超限的超高层住宅,采用剪力墙结构体系,均存在扭转不规则、凹凸不规则、穿层柱3项不规则项次,结构高度均为136.6m。3栋、4栋为同一楼型,文章详细介绍了3栋、4栋的结构超限情况及抗震性能... 佛山市某住宅项目3栋、4栋、5栋、6栋、7栋为高度超限的超高层住宅,采用剪力墙结构体系,均存在扭转不规则、凹凸不规则、穿层柱3项不规则项次,结构高度均为136.6m。3栋、4栋为同一楼型,文章详细介绍了3栋、4栋的结构超限情况及抗震性能目标,并利用YJK与ETABS两种计算软件对比小震分析的整体指标,选取7组地震波进行弹性时程分析,同时采用SAUSAGE软件进行弹塑性时程分析。塔楼底部局部区域存在2层通高穿层墙柱,使用MIDAS Gen软件进行了屈曲分析;针对核心筒与分肢相连的楼盖弱连接处分析楼盖的抗剪、抗拉及抗弯承载力,并给出了设计配筋;依据当地政策要求给出了3栋、4栋塔楼装配式设计方案。结构设计安全可靠,满足国家规范及佛山市政策要求。 展开更多
关键词 住宅 抗震性能化设计 穿层墙柱 楼盖弱连接分析 装配式方案
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部