Lysozyme reaction was developed as a novel technique for minimizing the amount of excess sludge in the sequential batch reactor(SBR).In the present work,excess sludge taken from a SBR system was treated by lysozyme re...Lysozyme reaction was developed as a novel technique for minimizing the amount of excess sludge in the sequential batch reactor(SBR).In the present work,excess sludge taken from a SBR system was treated by lysozyme reaction and then returned to the reactor.The quality of the effluent water and characteristics of the activated sludge in the SBR were analyzed to determine the effectiveness of the reduction process.The results show that excess sludge production could be reduced to almost 100%in the first30 d of operation and could be reduced to further by 40%in the succeeding 20 d or so.In these time periods,the average removal efficiencies of the chemical oxygen demand and total nitrogen are 87.38%and 52.78%,respectively,whereas the average total phosphorous in the effluent is nearly 17.18%greater than that of the effluent of the reference system.After 50 d of operation,the sludge floc size is in the range of 20 to 80μm,which was smaller than the size prior to the start of the hydrolysis and the ratio of mixed liquor volatile suspended solids/mixed liquor suspended solids increases from 86%to 90%.展开更多
In recent years,composite pellet production with added reductant has been developed instead of traditional iron production.Composite pellets produced by the addition of appropriate proportions of reductant produce spo...In recent years,composite pellet production with added reductant has been developed instead of traditional iron production.Composite pellets produced by the addition of appropriate proportions of reductant produce sponge iron in the reductant melting process at high temperatures.The elements created in the structure by pellet production directly affect the quality of the product obtained by determining the chemical composition and the appropriate reaction temperature.In this study,sponge iron ore concentrate(scale)and reductant(coke coal dust and sodium bentonite)were mixed at certain proportions to produce composite pellet samples;the effects of addition rate of the reductant material of sodium bentonite(1 wt%−4 wt%)and variation in reaction temperature(900−1200℃)on the metallization and compressive strength properties of the produced composite pellet samples were investigated.The analysis results show that the highest compressive strength is obtained from pellet samples produced with 3%sodium bentonite at 1100℃.Additionally,SEM-EDS analysis results of the samples show that the morphologic structure has much lower porosity rates compared to samples produced under the other conditions which makes the samples denser and increases the metallization properties.展开更多
Isothermal experiments on the reduction of Fe_2O_3-Cr_2O_3-NiO(molar ratio of Fe-to-Cr-to-Ni is 3:2:2)by graphite were carried out at 1350–1550°C,and effects of various factors on reduction degree were studied.T...Isothermal experiments on the reduction of Fe_2O_3-Cr_2O_3-NiO(molar ratio of Fe-to-Cr-to-Ni is 3:2:2)by graphite were carried out at 1350–1550°C,and effects of various factors on reduction degree were studied.The results show that the reaction rate of the Fe_2O_3-Cr_2O_3-NiO system is fast during the initial period(reduction degree,α<38%),and then the rate decreases until the end of the reduction.Factors such as temperature,carbon content,sample size have a more significant effect during the final stage(α>38%).The metallic product formed at the initial stage(a Fe-Ni alloy)greatly promotes the reduction of Cr2O3 at the final stage.Further,during the reduction of Fe_2O_3-Cr_2O_3-NiO by carbon,interfacial reaction is the rate-controlling step and g(α)=1-(1-α)0.5 is the reaction mechanism for the initial stage,whereas two-dimensional diffusion is the rate-controlling step and f(α)=α+(1-α)ln(1-α)is the reaction mechanism for the final stage.The apparent activation energies are 55.43 k J/mol and 174.54 k J/mol for the initial and the final stages,respectively.展开更多
基金Project(51078130)supported by the National Natural Science Foundation of ChinaProject(10C0419)supported by the the Education Department of Hunan Province,China
文摘Lysozyme reaction was developed as a novel technique for minimizing the amount of excess sludge in the sequential batch reactor(SBR).In the present work,excess sludge taken from a SBR system was treated by lysozyme reaction and then returned to the reactor.The quality of the effluent water and characteristics of the activated sludge in the SBR were analyzed to determine the effectiveness of the reduction process.The results show that excess sludge production could be reduced to almost 100%in the first30 d of operation and could be reduced to further by 40%in the succeeding 20 d or so.In these time periods,the average removal efficiencies of the chemical oxygen demand and total nitrogen are 87.38%and 52.78%,respectively,whereas the average total phosphorous in the effluent is nearly 17.18%greater than that of the effluent of the reference system.After 50 d of operation,the sludge floc size is in the range of 20 to 80μm,which was smaller than the size prior to the start of the hydrolysis and the ratio of mixed liquor volatile suspended solids/mixed liquor suspended solids increases from 86%to 90%.
文摘In recent years,composite pellet production with added reductant has been developed instead of traditional iron production.Composite pellets produced by the addition of appropriate proportions of reductant produce sponge iron in the reductant melting process at high temperatures.The elements created in the structure by pellet production directly affect the quality of the product obtained by determining the chemical composition and the appropriate reaction temperature.In this study,sponge iron ore concentrate(scale)and reductant(coke coal dust and sodium bentonite)were mixed at certain proportions to produce composite pellet samples;the effects of addition rate of the reductant material of sodium bentonite(1 wt%−4 wt%)and variation in reaction temperature(900−1200℃)on the metallization and compressive strength properties of the produced composite pellet samples were investigated.The analysis results show that the highest compressive strength is obtained from pellet samples produced with 3%sodium bentonite at 1100℃.Additionally,SEM-EDS analysis results of the samples show that the morphologic structure has much lower porosity rates compared to samples produced under the other conditions which makes the samples denser and increases the metallization properties.
基金Project(51074025) supported by the National Natural Science Foundation of ChinaProject(FRF-SD-12-009A) supported by the Fundamental Research Funds for the Central Universities,China
文摘Isothermal experiments on the reduction of Fe_2O_3-Cr_2O_3-NiO(molar ratio of Fe-to-Cr-to-Ni is 3:2:2)by graphite were carried out at 1350–1550°C,and effects of various factors on reduction degree were studied.The results show that the reaction rate of the Fe_2O_3-Cr_2O_3-NiO system is fast during the initial period(reduction degree,α<38%),and then the rate decreases until the end of the reduction.Factors such as temperature,carbon content,sample size have a more significant effect during the final stage(α>38%).The metallic product formed at the initial stage(a Fe-Ni alloy)greatly promotes the reduction of Cr2O3 at the final stage.Further,during the reduction of Fe_2O_3-Cr_2O_3-NiO by carbon,interfacial reaction is the rate-controlling step and g(α)=1-(1-α)0.5 is the reaction mechanism for the initial stage,whereas two-dimensional diffusion is the rate-controlling step and f(α)=α+(1-α)ln(1-α)is the reaction mechanism for the final stage.The apparent activation energies are 55.43 k J/mol and 174.54 k J/mol for the initial and the final stages,respectively.
