To reduce the excessive vibration of a high-speed rotor system at the critical speed, a friction damper with a flexible support structure is introduced. The mechanism of vibration reduction and support characteristics...To reduce the excessive vibration of a high-speed rotor system at the critical speed, a friction damper with a flexible support structure is introduced. The mechanism of vibration reduction and support characteristics are analyzed and a friction damper is designed. The effect on an unbalanced response is studied. Results show that the stiffness factor and the friction-damping factor of the damper are related to the cone angle and the friction factor of the inner-ring when adopting a proper structure. By changing these parameters and the Z-directional stiffness of the outer-ring, the stiffness and the damping characteristic of the damper can be varied. Introducing a friction damper into the support can reduce the stiffness and increase the damping of the support, thus decreasing the critical speed to avoid the operating speed, suppress the resonant response of a rotor system, and attenuate vibration forces to the outside.展开更多
Friction and lubrication simulation analysis of internal combustion engine bearings are studied. A series of software implementary precepts for mathematical modeling, to analytic calculating and realizing simulation o...Friction and lubrication simulation analysis of internal combustion engine bearings are studied. A series of software implementary precepts for mathematical modeling, to analytic calculating and realizing simulation outcome are brought forward. As a dynamic simulating technique is introduced into the process of engine bearing design, simulation models of the oil film are built and the emulational analysis of the shaft center track is carried out. A software program package “Engine Bearing Friction and Lubrication Dynamic Simulation System” is developed to realize the real time simulation of the working status of bearing during the design process. Through developing virtualized products, the defects of the product design can be found in time and improve the products at once. Thus the purpose of predicting and controlling the cost, quality and design period of the products can be achieved.展开更多
A BN-containing additive,the boron and nitrogen modified rapeseed oil (abbreviated as BNR),was prepared by chemical modification of rapeseed oil with boric and nitrous compounds.The friction and wear performances of t...A BN-containing additive,the boron and nitrogen modified rapeseed oil (abbreviated as BNR),was prepared by chemical modification of rapeseed oil with boric and nitrous compounds.The friction and wear performances of the AZ91D magnesium alloy against the GCr15 bearing steel under lubrication of rapeseed oil containing BNR were evaluated on a SRV tribotester.The topography and chemical species of the worn surfaces of magnesium alloy were analyzed by a scanning electron microscope (SEM) and an X-ray photoelectron spectroscope (XPS),respectively.The test results indicated that the friction and wear of the magnesium alloy-steel tribomates could be effectively reduced by incorporating BNR into the rapeseed oil lubricant.The friction coefficients and the wear scars of magnesium alloy decreased with an increasing content of BNR.The surface lubricated with the BNR-doped rapeseed oil demonstrated less wear as compared with that lubricated with neat rapeseed oil.The enhanced anti-wear and friction-reducing abilities of rapeseed oil provided by BNR in the lubrication of magnesium alloy against steel were ascribed to the formation of a composite boundary lubrication film due to the strong adsorption of BNR and rapeseed oil onto the lubricated surfaces and their tribochemical reactions with magnesium alloy.展开更多
The friction coefficients between the surfaces of a ball and a disc lubricated by a space lubricating oil No.4129 were measured at various operating conditions on a ball-disc friction test rig. Friction characteristic...The friction coefficients between the surfaces of a ball and a disc lubricated by a space lubricating oil No.4129 were measured at various operating conditions on a ball-disc friction test rig. Friction characteristic curves were obtained under sliding and rolling movements at point contact. A new model for calculation of the friction coefficient was presented. The results show that the bigger the load is, the larger the friction coefficient becomes. The rolling speed ranging from 1 m/s to10 m/s has an important effect on the friction coefficient. The friction coefficient increases with the increase in sliding speed and the decrease in rolling speed. The linear variation region of the friction coefficient versus the sliding speed at high rolling speed is wider than that at low rolling speed. The model for calculation of the friction coefficient is accurate for engineering use.展开更多
文摘To reduce the excessive vibration of a high-speed rotor system at the critical speed, a friction damper with a flexible support structure is introduced. The mechanism of vibration reduction and support characteristics are analyzed and a friction damper is designed. The effect on an unbalanced response is studied. Results show that the stiffness factor and the friction-damping factor of the damper are related to the cone angle and the friction factor of the inner-ring when adopting a proper structure. By changing these parameters and the Z-directional stiffness of the outer-ring, the stiffness and the damping characteristic of the damper can be varied. Introducing a friction damper into the support can reduce the stiffness and increase the damping of the support, thus decreasing the critical speed to avoid the operating speed, suppress the resonant response of a rotor system, and attenuate vibration forces to the outside.
文摘Friction and lubrication simulation analysis of internal combustion engine bearings are studied. A series of software implementary precepts for mathematical modeling, to analytic calculating and realizing simulation outcome are brought forward. As a dynamic simulating technique is introduced into the process of engine bearing design, simulation models of the oil film are built and the emulational analysis of the shaft center track is carried out. A software program package “Engine Bearing Friction and Lubrication Dynamic Simulation System” is developed to realize the real time simulation of the working status of bearing during the design process. Through developing virtualized products, the defects of the product design can be found in time and improve the products at once. Thus the purpose of predicting and controlling the cost, quality and design period of the products can be achieved.
基金the financial support from the National Natural Science Foundation of China (project No. 50975282)
文摘A BN-containing additive,the boron and nitrogen modified rapeseed oil (abbreviated as BNR),was prepared by chemical modification of rapeseed oil with boric and nitrous compounds.The friction and wear performances of the AZ91D magnesium alloy against the GCr15 bearing steel under lubrication of rapeseed oil containing BNR were evaluated on a SRV tribotester.The topography and chemical species of the worn surfaces of magnesium alloy were analyzed by a scanning electron microscope (SEM) and an X-ray photoelectron spectroscope (XPS),respectively.The test results indicated that the friction and wear of the magnesium alloy-steel tribomates could be effectively reduced by incorporating BNR into the rapeseed oil lubricant.The friction coefficients and the wear scars of magnesium alloy decreased with an increasing content of BNR.The surface lubricated with the BNR-doped rapeseed oil demonstrated less wear as compared with that lubricated with neat rapeseed oil.The enhanced anti-wear and friction-reducing abilities of rapeseed oil provided by BNR in the lubrication of magnesium alloy against steel were ascribed to the formation of a composite boundary lubrication film due to the strong adsorption of BNR and rapeseed oil onto the lubricated surfaces and their tribochemical reactions with magnesium alloy.
基金supported by the National Science Foundation of China (51105131)the Excellent Youth Foundation of Henan Scientific Committee (12410050002)the Creative Talent Foundation at Universities of Henan Province (2011HASTIT1016)
文摘The friction coefficients between the surfaces of a ball and a disc lubricated by a space lubricating oil No.4129 were measured at various operating conditions on a ball-disc friction test rig. Friction characteristic curves were obtained under sliding and rolling movements at point contact. A new model for calculation of the friction coefficient was presented. The results show that the bigger the load is, the larger the friction coefficient becomes. The rolling speed ranging from 1 m/s to10 m/s has an important effect on the friction coefficient. The friction coefficient increases with the increase in sliding speed and the decrease in rolling speed. The linear variation region of the friction coefficient versus the sliding speed at high rolling speed is wider than that at low rolling speed. The model for calculation of the friction coefficient is accurate for engineering use.
