The motor and trailer cars of a high-speed train were modeled as a multi-rigid body system with two suspensions. According to structural characteristic of a slab track, a new spatial vibration model of track segment e...The motor and trailer cars of a high-speed train were modeled as a multi-rigid body system with two suspensions. According to structural characteristic of a slab track, a new spatial vibration model of track segment element of the slab track was put forward. The spatial vibration equation set of the high-speed train and slab track system was then established on the basis of the principle of total potential energy with stationary value in elastic system dynamics and the rule of ＂set-in-right-position＂ for formulating system matrices. The equation set was solved by the Wilson-θ direct integration method. The contents mentioned above constitute the analysis theory of spatial vibration of high-speed train and slab track system. The theory was then verified by the high-speed running experiment carried out on the slab track in the Qinghuangdao-Shenyang passenger transport line. The results show that the calculated results agree well with the measured rcsults, such as the calculated lateral and vertical rail displacements are 0.82 mm and 0.9 mm and the measured ones 0.75 mm and 0.93 mm, respectively; the calculated lateral and vertical wheel-rail forces are 8.9 kN and 102.3 kN and the measured ones 8.6 kN and 80.2 kN, respectively. The interpolation method, that is, the lateral finite strip and slab segment element, for slab deformation proposed is of simplification and applicability compared with the traditional plate element method. All of these demonstrate the reliability of the theory proposed.展开更多
This paper focuses on understanding and evaluating the dynamic effect of the heavy-haul train system on the seismic performance of a long-span railway bridge. A systematic study on the effect of heavy-haul trains on b...This paper focuses on understanding and evaluating the dynamic effect of the heavy-haul train system on the seismic performance of a long-span railway bridge. A systematic study on the effect of heavy-haul trains on bridge seismic response has been conducted, considering the influence of vehicle modeling strategies and dynamic characteristics of the seismic waves. For this purpose, the performance of a long-span cable-stayed railway bridge is assessed with stationary trains atop it, where the heavy-haul vehicles are modeled in two different ways: the multi-rigid body model with suspension system and additional mass model. Comparison of the bridge response in the presence or absence of the train system has been conducted, and the vehicle loading situation, which includes full-load and no-load, is also discussed. The result shows that during the earthquake, the peak moment of the main girder and peak stress of stay cables increase by 80% and by 40% in the presence of fully loaded heavy-haul trains, respectively. At the same time, a considerable decrease appears in the peak acceleration of the main girder. This proves the existence of the damping effect of the heavy-haul train system, and this effect is more obvious for the fully loaded vehicles. Finally, this paper proposes an efficient vehicle modeling method with 2 degrees of freedom(DOF) for simplifying the treatment of the train system in bridge seismic checking.展开更多
Results of in-situ vibration measurement carried out at Tianjin West Elevated Railway Station which has the trains running on the station structure were reported. The main excitation source is the train passing throug...Results of in-situ vibration measurement carried out at Tianjin West Elevated Railway Station which has the trains running on the station structure were reported. The main excitation source is the train passing through the station. Vibration measurements were recorded in the vertical direction of the supporting track beam, the platform and the steel truss beam of the waiting hall, as well as in the vertical, longitudinal and transverse directions of the roof arch base of the station. Acceleration time responses were obtained. The maximum value, vibration level and one-third octave band RMS spectra of the measured accelerations were studied. The propagation of vibration in different structural floors was discussed. The influence of train speed, distance to the vibration source and the type of train on the structural vibration were analyzed. Results show that the vibration level increases with the train speed, while it attenuates with the distance to the track. Furthermore, the vibration responses of different structural floors were compared, and it is noted that the vertical vibration of the bottom slab of the platform is most severe and the transverse vibration of the roof arch base is the smallest. The results provide reference on the vibration characteristics and vibration energy distribution of this type of "Train on building frame" system used as an elevated railway station.展开更多
基金Project(2007CB714706) supported by the National Basic Research Program of ChinaProject (50678176) supported by the National Natural Science Foundation of ChinaProject(NCET-07-0866) supported by the Program for New Century Excellent Talents in University
文摘The motor and trailer cars of a high-speed train were modeled as a multi-rigid body system with two suspensions. According to structural characteristic of a slab track, a new spatial vibration model of track segment element of the slab track was put forward. The spatial vibration equation set of the high-speed train and slab track system was then established on the basis of the principle of total potential energy with stationary value in elastic system dynamics and the rule of ＂set-in-right-position＂ for formulating system matrices. The equation set was solved by the Wilson-θ direct integration method. The contents mentioned above constitute the analysis theory of spatial vibration of high-speed train and slab track system. The theory was then verified by the high-speed running experiment carried out on the slab track in the Qinghuangdao-Shenyang passenger transport line. The results show that the calculated results agree well with the measured rcsults, such as the calculated lateral and vertical rail displacements are 0.82 mm and 0.9 mm and the measured ones 0.75 mm and 0.93 mm, respectively; the calculated lateral and vertical wheel-rail forces are 8.9 kN and 102.3 kN and the measured ones 8.6 kN and 80.2 kN, respectively. The interpolation method, that is, the lateral finite strip and slab segment element, for slab deformation proposed is of simplification and applicability compared with the traditional plate element method. All of these demonstrate the reliability of the theory proposed.
基金Project(51678576) supported by the National Natural Science Foundation of ChinaProject(2017YFB1201204) supported by the National Key R&D Program of China。
文摘This paper focuses on understanding and evaluating the dynamic effect of the heavy-haul train system on the seismic performance of a long-span railway bridge. A systematic study on the effect of heavy-haul trains on bridge seismic response has been conducted, considering the influence of vehicle modeling strategies and dynamic characteristics of the seismic waves. For this purpose, the performance of a long-span cable-stayed railway bridge is assessed with stationary trains atop it, where the heavy-haul vehicles are modeled in two different ways: the multi-rigid body model with suspension system and additional mass model. Comparison of the bridge response in the presence or absence of the train system has been conducted, and the vehicle loading situation, which includes full-load and no-load, is also discussed. The result shows that during the earthquake, the peak moment of the main girder and peak stress of stay cables increase by 80% and by 40% in the presence of fully loaded heavy-haul trains, respectively. At the same time, a considerable decrease appears in the peak acceleration of the main girder. This proves the existence of the damping effect of the heavy-haul train system, and this effect is more obvious for the fully loaded vehicles. Finally, this paper proposes an efficient vehicle modeling method with 2 degrees of freedom(DOF) for simplifying the treatment of the train system in bridge seismic checking.
基金Project(50938008)supported by the Natural Science Foundation of Beijing,ChinaProject(2012JBM007)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(NCET-11-0571)supported by the Program for New Century Excellent Talents in University,China
文摘Results of in-situ vibration measurement carried out at Tianjin West Elevated Railway Station which has the trains running on the station structure were reported. The main excitation source is the train passing through the station. Vibration measurements were recorded in the vertical direction of the supporting track beam, the platform and the steel truss beam of the waiting hall, as well as in the vertical, longitudinal and transverse directions of the roof arch base of the station. Acceleration time responses were obtained. The maximum value, vibration level and one-third octave band RMS spectra of the measured accelerations were studied. The propagation of vibration in different structural floors was discussed. The influence of train speed, distance to the vibration source and the type of train on the structural vibration were analyzed. Results show that the vibration level increases with the train speed, while it attenuates with the distance to the track. Furthermore, the vibration responses of different structural floors were compared, and it is noted that the vertical vibration of the bottom slab of the platform is most severe and the transverse vibration of the roof arch base is the smallest. The results provide reference on the vibration characteristics and vibration energy distribution of this type of "Train on building frame" system used as an elevated railway station.
