The fluidization behavior of SiO2, ZnO and TiO2 non-magnetic nanoparticles was investigated in a magnetically fluidized bed （MFB） by adding coarse magnets. The effects of both the amount of coarse magnets and the ma...The fluidization behavior of SiO2, ZnO and TiO2 non-magnetic nanoparticles was investigated in a magnetically fluidized bed （MFB） by adding coarse magnets. The effects of both the amount of coarse magnets and the magnetic field intensity on the fluidization quality of these nanoparticles were investigated. The results show that the coarse magnets added to the bed lead to a reduction in the size of the aggregates formed naturally by the primary nanopartieles. As the macroscopic performances of improved fluidization quality, the bed expansion ratio increases whilst the minimum fluidization velocity decreases with increasing the magnetic field intensity, but for TiO2 nanoparticles there exists a suitable magnetic field intensity of 0.059 6 T. The optimal amounts of coarse magnets for SiO2, ZnO and TiO2 non-magnetic nanoparticles are 40%, 50% and 60% （mass fraction）, respectively. The bed expansion results analyzed by the Richardson-Zaki scaling law show that the exponents depend on both the amount of coarse magnets and the magnetic field intensity.展开更多
Microwave absorbing properties of high titanium slag were investigated by using microwave cavity perturbation technique. High titanium slag containing more than 90% TiO2 was prepared by carbothermal reduction of ilmen...Microwave absorbing properties of high titanium slag were investigated by using microwave cavity perturbation technique. High titanium slag containing more than 90% TiO2 was prepared by carbothermal reduction of ilmenite. The temperature rise curve of high titanium slag in microwave heating process was obtained. Crystalline compounds of high titanium slag before and after microwave irradiation were obtained and characterized by X-ray diffractometry （XRD）. Effects of particle size of high titanium slag anal mixtures of high titanium slag with different mass fractions of V2o5 on microwave absorbing properties were investigated systematically. The results show that high titanium slag has good microwave absorption property; untreated high titanium slag mainly consists of crystalline compounds of anatase and iron titanium oxide, while the microwave-irradiation treated one is mainly composed of crystalline compounds of rutile and irgn titanium oxide. Synthetic anatase is transformed completely into rutile at about 1 050 ℃ for 20 min under microwave irradiation. High frequency shift and low amplitude of voltage make high titanium slag an ideal microwave absorbent. 180 μm of particle size and 10% mass fraction of V2O5 are found to be the optimum conditions for microwave absorption.展开更多
Perfluorolyether is characterized by highly chemical inertness, oxidative stability, anticorrosion as well as radiation resistance. It can be used as lubricant especially in harsh environmental conditions. In this wor...Perfluorolyether is characterized by highly chemical inertness, oxidative stability, anticorrosion as well as radiation resistance. It can be used as lubricant especially in harsh environmental conditions. In this work, hexafluoropylene oxide was catalytically polymerized at low temperature using the methods of anionic polymerization, and perfluorolyethers were obtained with number-average degree of polymerization more than 15. CsF and RbF were used as catalysts and their catalytic activities were investigated. Experimental results show that perfluorolyethers with number-average molar masses up to 3 000 g/mol could be obtained using the two kinds of catalysts, respectively. As compared to CsF, the number-average degree of polymerization is higher and the relative molecular mass distribution interval is narrower when RbF is used as catalyst. The effect of factors such as impurities＇ content, reaction temperature and reaction time on the number-average degree of polymerization was also investigated. It is found that low impurities＇ content and low temperature are beneficial to the generation of high number-average degree of perfluorolyethers. The optimization reaction time is 24 h, and fiarther increase of reaction time does not significantly affect the average relative molecular mass. The product was characterized by IR, 19F NMR and GC-MS, and the catalytic mechanism was analyzed finally.展开更多
基金Project(20776163) supported by the National Natural Science Foundation of ChinaProject(20070533121) supported by the PhD Programs Foundation of Ministry of Education of ChinaProject supported by the NSFC-JSPS Cooperation Program
文摘The fluidization behavior of SiO2, ZnO and TiO2 non-magnetic nanoparticles was investigated in a magnetically fluidized bed （MFB） by adding coarse magnets. The effects of both the amount of coarse magnets and the magnetic field intensity on the fluidization quality of these nanoparticles were investigated. The results show that the coarse magnets added to the bed lead to a reduction in the size of the aggregates formed naturally by the primary nanopartieles. As the macroscopic performances of improved fluidization quality, the bed expansion ratio increases whilst the minimum fluidization velocity decreases with increasing the magnetic field intensity, but for TiO2 nanoparticles there exists a suitable magnetic field intensity of 0.059 6 T. The optimal amounts of coarse magnets for SiO2, ZnO and TiO2 non-magnetic nanoparticles are 40%, 50% and 60% （mass fraction）, respectively. The bed expansion results analyzed by the Richardson-Zaki scaling law show that the exponents depend on both the amount of coarse magnets and the magnetic field intensity.
基金Project(2007CB613606) supported by the Major State Basic Research and Development Program of ChinaProject(50734007) supported by the National Natural Science Foundation of China
文摘Microwave absorbing properties of high titanium slag were investigated by using microwave cavity perturbation technique. High titanium slag containing more than 90% TiO2 was prepared by carbothermal reduction of ilmenite. The temperature rise curve of high titanium slag in microwave heating process was obtained. Crystalline compounds of high titanium slag before and after microwave irradiation were obtained and characterized by X-ray diffractometry （XRD）. Effects of particle size of high titanium slag anal mixtures of high titanium slag with different mass fractions of V2o5 on microwave absorbing properties were investigated systematically. The results show that high titanium slag has good microwave absorption property; untreated high titanium slag mainly consists of crystalline compounds of anatase and iron titanium oxide, while the microwave-irradiation treated one is mainly composed of crystalline compounds of rutile and irgn titanium oxide. Synthetic anatase is transformed completely into rutile at about 1 050 ℃ for 20 min under microwave irradiation. High frequency shift and low amplitude of voltage make high titanium slag an ideal microwave absorbent. 180 μm of particle size and 10% mass fraction of V2O5 are found to be the optimum conditions for microwave absorption.
基金Project(53110704012) supported by the Fundamental Research Funds for the Central Universities,China
文摘Perfluorolyether is characterized by highly chemical inertness, oxidative stability, anticorrosion as well as radiation resistance. It can be used as lubricant especially in harsh environmental conditions. In this work, hexafluoropylene oxide was catalytically polymerized at low temperature using the methods of anionic polymerization, and perfluorolyethers were obtained with number-average degree of polymerization more than 15. CsF and RbF were used as catalysts and their catalytic activities were investigated. Experimental results show that perfluorolyethers with number-average molar masses up to 3 000 g/mol could be obtained using the two kinds of catalysts, respectively. As compared to CsF, the number-average degree of polymerization is higher and the relative molecular mass distribution interval is narrower when RbF is used as catalyst. The effect of factors such as impurities＇ content, reaction temperature and reaction time on the number-average degree of polymerization was also investigated. It is found that low impurities＇ content and low temperature are beneficial to the generation of high number-average degree of perfluorolyethers. The optimization reaction time is 24 h, and fiarther increase of reaction time does not significantly affect the average relative molecular mass. The product was characterized by IR, 19F NMR and GC-MS, and the catalytic mechanism was analyzed finally.
