期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
一种合并状态度量计算的高效并行Turbo码译码器结构设计及FPGA实现 被引量:1
1
作者 张茜 詹明 +3 位作者 章坚武 王富龙 冯云开 唐浩 《电信科学》 2022年第2期47-58,共12页
为满足无线通信中高吞吐、低功耗的要求,并行译码器的结构设计得到了广泛的关注。基于并行Turbo码译码算法,研究了前后向度量计算中的对称性,提出了一种基于前后向合并计算的高效并行Turbo码译码器结构设计方案,并进行现场可编程门阵列(... 为满足无线通信中高吞吐、低功耗的要求,并行译码器的结构设计得到了广泛的关注。基于并行Turbo码译码算法,研究了前后向度量计算中的对称性,提出了一种基于前后向合并计算的高效并行Turbo码译码器结构设计方案,并进行现场可编程门阵列(field-programmable gate array,FPGA)实现。结果表明,与已有的并行Turbo码译码器结构相比,本文提出的设计结构使状态度量计算模块的逻辑资源降低50%左右,动态功耗在125 MHz频率下降低5.26%,同时译码性能与并行算法的译码性能接近。 展开更多
关键词 状态度量合并计算 TURBO码 FPGA实现 并行算法
在线阅读 下载PDF
小龙虾识别与度量关键技术研究与应用
2
作者 皮瑜 龚珺函 +3 位作者 陈黎 周浩宇 朱幸辉 王冬武 《湖南农业科学》 2024年第1期64-71,共8页
小龙虾的表型性状是水产养殖和遗传育种中非常重要的经济依据,为了精准实现对小龙虾的视觉检测与定位,并对其主体躯干表型特征进行测量。首先提出了一种基于Mask RCNN实例分割模型检测小龙虾的方法,不仅能快速识别小龙虾,还能对其进行... 小龙虾的表型性状是水产养殖和遗传育种中非常重要的经济依据,为了精准实现对小龙虾的视觉检测与定位,并对其主体躯干表型特征进行测量。首先提出了一种基于Mask RCNN实例分割模型检测小龙虾的方法,不仅能快速识别小龙虾,还能对其进行实例分割,生成高质量的二值掩膜图。然后在此基础上,提出一种新的小龙虾度量算法:通过提取小龙虾的轮廓曲线,获取其中轴线,采用分区法提取小龙虾的特征区域,再利用凸包和凸包缺陷算法获取小龙虾的特征点,实现对其全长、体长、头胸甲、腹部、尾扇等主要部位的无接触度量计算。结果表明:Mask RCNN模型在小龙虾数据集上具有很好的泛化性能,模型分割准确率达到了94.6%,目标识别的平均检测精度达到了98.7%。各测量指标的平均绝对误差均在5 mm之内,比人工手动测量难度大大减小,并且稳定高效,重复性更好。该方法将有利于生产和选育过程中小龙虾的鉴别及结构尺寸的快速获取。 展开更多
关键词 小龙虾 Mask RCNN 凸包和凸包缺陷 中轴线 无接触度量计算
在线阅读 下载PDF
计算机系统变革性研究的4个问题 被引量:3
3
作者 徐志伟 李沛旭 查礼 《计算机研究与发展》 EI CSCD 北大核心 2008年第12期2011-2019,共9页
进入21世纪,计算机科学与技术领域正在面临一次深刻的变革,计算机系统子领域也不例外.指出这次变革的一个主要特征是从"人机共生"跃变到"人机物社会".这个跃变也为计算机系统的研究提出了4个带有基础性的挑战:1)重... 进入21世纪,计算机科学与技术领域正在面临一次深刻的变革,计算机系统子领域也不例外.指出这次变革的一个主要特征是从"人机共生"跃变到"人机物社会".这个跃变也为计算机系统的研究提出了4个带有基础性的挑战:1)重新审视计算和计算机系统概念,以及刻画新型负载和使用模式;2)研究新型的计算机系统度量;3)让计算机系统直接支持网络;4)发现和利用涌现现象.基于中国科学院计算技术研究所织女星网格小组和国际同行的研究工作,讨论了这4个问题,并指出这些问题还没有答案,这提供了很多研究机会. 展开更多
关键词 计算机系统 变革性研究 人机物社会 分散系统 计算度量 涌现性质
在线阅读 下载PDF
基于EMD的剖分空间关系计算模型初探 被引量:1
4
作者 董芳 程承旗 郭仕德 《北京大学学报(自然科学版)》 EI CAS CSCD 北大核心 2012年第3期444-450,共7页
针对在空间关系计算中存在的经纬度坐标缺少区域信息的问题,以及基于影像直接进行空间关系计算中存在的计算复杂的问题,利用具有点面二相性的基于地图分幅的扩展模型(EMD)全球剖分面片作为空间关系计算的基本单位,采用EMD全球剖分面片... 针对在空间关系计算中存在的经纬度坐标缺少区域信息的问题,以及基于影像直接进行空间关系计算中存在的计算复杂的问题,利用具有点面二相性的基于地图分幅的扩展模型(EMD)全球剖分面片作为空间关系计算的基本单位,采用EMD全球剖分面片编码代替经纬度坐标进行空间关系计算,提出EMD剖分空间关系计算模型的体系架构,并在此基础上进行验证实验,证实了该模型的可行性。 展开更多
关键词 空间关系计算 体系架构 拓扑关系计算 度量关系计算 方向关系计算 EMD全球剖分
在线阅读 下载PDF
CMDC:一种差异互补的迭代式多维度文本聚类算法 被引量:5
5
作者 黄瑞章 白瑞娜 +3 位作者 陈艳平 秦永彬 程欣宇 田有亮 《通信学报》 EI CSCD 北大核心 2020年第8期155-164,共10页
针对传统多维度文本聚类算法把文本表示与聚类过程分离,忽略了维度间的互补特性的问题,提出了一种差异互补的迭代式多维度文本聚类算法——CMDC,实现文本聚类与特征调整过程的统一优化。CMDC算法挑选维度聚类间结果的互补文本,基于局部... 针对传统多维度文本聚类算法把文本表示与聚类过程分离,忽略了维度间的互补特性的问题,提出了一种差异互补的迭代式多维度文本聚类算法——CMDC,实现文本聚类与特征调整过程的统一优化。CMDC算法挑选维度聚类间结果的互补文本,基于局部度量学习算法利用互补文本促进聚类的特征调优,以维度的度量一致性来解决多维度文本聚类的划分一致性。实验结果表明,CMDC算法有效地提升了多维度聚类性能。 展开更多
关键词 多维度文本聚类 互补文本 约束文本聚类 度量计算
在线阅读 下载PDF
Similarity measure design and similarity computation for discrete fuzzy data 被引量:7
6
作者 LEE Sang-Hyuk PARK Wook-Je JUNG Dong-yean 《Journal of Central South University》 SCIE EI CAS 2011年第5期1602-1608,共7页
The similarity computations for fuzzy membership function pairs were carried out.Fuzzy number related knowledge was introduced,and conventional similarity was compared with distance based similarity measure.The useful... The similarity computations for fuzzy membership function pairs were carried out.Fuzzy number related knowledge was introduced,and conventional similarity was compared with distance based similarity measure.The usefulness of the proposed similarity measure was verified.The results show that the proposed similarity measure could be applied to ordinary fuzzy membership functions,though it was not easy to design.Through conventional results on the calculation of similarity for fuzzy membership pair,fuzzy membership-crisp pair and crisp-crisp pair were carried out.The proposed distance based similarity measure represented rational performance with the heuristic point of view.Furthermore,troublesome in fuzzy number based similarity measure for abnormal universe of discourse case was discussed.Finally,the similarity measure computation for various membership function pairs was discussed with other conventional results. 展开更多
关键词 similarity measure fuzzy number DISTANCE similarity evaluation fuzzy membership function
在线阅读 下载PDF
A novel estimation algorithm for torpedo tracking in undersea environment 被引量:1
7
作者 D.V.A.N.RAVI KUMAR S.KOTESWARA RAO K.PADMA RAJU 《Journal of Central South University》 SCIE EI CAS CSCD 2019年第3期673-683,共11页
A novel estimation algorithm is introduced to handle the popular undersea problem called torpedo tracking with angle-only measurements with a better approach compared to the existing filters. The new algorithm produce... A novel estimation algorithm is introduced to handle the popular undersea problem called torpedo tracking with angle-only measurements with a better approach compared to the existing filters. The new algorithm produces a better estimate from the outputs produced by the traditional nonlinear approaches with the assistance of simple noise minimizers like maximum likelihood filter or any other algorithm which belongs to their family. The introduced method is extended to the higher version in two ways. The first approach extracts a better estimate and covariance by enhancing the count of the intermediate filters, while the second approach accepts more inputs so as to attain improved performance without enhancement of the intermediate filter count. The ideal choice of the placement of towed array sensors to improve the performance of the proposed method further is suggested as the one where the line of sight and the towed array are perpendicular. The results could get even better by moving the ownship in the direction of reducing range. All the results are verified in the MATLAB environment. 展开更多
关键词 estimation algorithm torpedo tracking angle-only measurements line of sight maximum likelihood filter
在线阅读 下载PDF
Synergistic effect of a new wedge-bond-type anchor for CFRP tendons
8
作者 谢桂华 刘荣桂 +2 位作者 陈蓓 李明君 石天罡 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第6期2260-2266,共7页
In order to improve the anchoring force of anchors for carbon fiber reinforced polymer(CFRP) tendons further, a new wedge-bond-type anchor for CFRP tendons was developed. The increment in anchoring force induced by th... In order to improve the anchoring force of anchors for carbon fiber reinforced polymer(CFRP) tendons further, a new wedge-bond-type anchor for CFRP tendons was developed. The increment in anchoring force induced by the clamping segment of anchor was studied. Taking the deformation of all parts in clamping segment in the transverse direction into consideration, the calculation formula for the increment of anchoring force was proposed based on the linear elastic hypotheses. The proposed model is verified by experiments and conclusions are drawn that the anchoring force is influenced mainly by the inclination angle of clamping pieces, the length of clamping part and the thickness of bonding medium. Especially, the thickness of bonding medium should be lowered in design to improve the synergistic effect of anchors. 展开更多
关键词 carbon fiber reinforced polymer ANCHOR wedge-bond-type synergistic effect elastic mechanics
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部