期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
稳态工况下水电机组主轴摆度峰峰值计算方法研究 被引量:14
1
作者 张飞 葛新峰 +1 位作者 潘罗平 付婧 《振动与冲击》 EI CSCD 北大核心 2015年第21期170-174,共5页
对目前状态监测与现场试验中主轴摆度峰峰值计算的常用方法进行了综述,将计算方法分成两类:极值法和置信度法。通过实例分析指出稳态工况下极值法计算时存在结果不稳定,且结果依赖于滤波器选择的问题。研究采用置信度法计算峰峰值,实例... 对目前状态监测与现场试验中主轴摆度峰峰值计算的常用方法进行了综述,将计算方法分成两类:极值法和置信度法。通过实例分析指出稳态工况下极值法计算时存在结果不稳定,且结果依赖于滤波器选择的问题。研究采用置信度法计算峰峰值,实例分析表明置信度法结果优于极值法。在95%的置信度下,当计算周期数不小于6时,采用95%置信度法对原始数据及不同滤波器作用下的数据计算得到的峰峰值结果均收敛,置信度法下的峰峰值计算结果相容。 展开更多
关键词 水电机组 主轴摆 峰峰值 极值 置信度法
在线阅读 下载PDF
三种传感器布点优化算法在系杆拱桥中的对比分析 被引量:3
2
作者 刘纲 杨溥 +1 位作者 刘遥 翁尚彬 《振动与冲击》 EI CSCD 北大核心 2008年第11期190-193,共4页
对三种不同的传感器优化布点算法在系杆拱桥中的应用进行对比分析,研究不同算法的侧重点及优化效果。首先对三种优化方法的原理进行分析,然后以一大跨系杆拱桥为背景,研究桥面在三种方法下加速度传感器测点布设的差异,并采用四种评估准... 对三种不同的传感器优化布点算法在系杆拱桥中的应用进行对比分析,研究不同算法的侧重点及优化效果。首先对三种优化方法的原理进行分析,然后以一大跨系杆拱桥为背景,研究桥面在三种方法下加速度传感器测点布设的差异,并采用四种评估准则对传感器布置的优化效果进行对比分析,最后采用无量纲化技术将四种评估准则转化为综合评价体系。分析结果表明:不同的优化算法对优化效果的影响较大,在进行传感器的优化布设时,必须对不同的优化算法进行对比,以选取最优算法。 展开更多
关键词 测点优化 改进的有效独立 模态置信度法 协方差矩阵
在线阅读 下载PDF
现场检测中混凝土强度推定相关问题的探讨 被引量:1
3
作者 彭立新 《工程质量》 2010年第12期8-11,共4页
介绍了混凝土强度推定的基本原理与4种现场检测混凝土强度的推定方法,并通过分析工程实例,提出可靠度置信区间法为推定混凝土强度特征值的优先方法。
关键词 混凝土强推定 混凝土强特征值 可靠置信区间
在线阅读 下载PDF
Securing Sensor Networks Based on Optimization of Weighted Confidence 被引量:2
4
作者 Hu Xiangdong Yu Pengqin Wei Qinfang 《China Communications》 SCIE CSCD 2012年第8期122-128,共7页
In this paper, an optimized rmlicious nodes detection algorithm, based on Weighted Confidence Filter (WCF), is proposed to protect sensor networks from attacks. In this algorithm, each cluster head in a cluster-base... In this paper, an optimized rmlicious nodes detection algorithm, based on Weighted Confidence Filter (WCF), is proposed to protect sensor networks from attacks. In this algorithm, each cluster head in a cluster-based hierarchical network figures out an average confidence degree by means of messages from its child nodes. The cluster head only accepts a message from the child node whose confidence degree is higher than the average. Meanwhile, it updates the confidence degrees for each of its child nodes by comparing the aggregation value and the received messages, and regards them as the weight of exactness of messages from nodes. A sensor node is judged to be rmlicious if its weight value is lower than the predefined threshold. Comparative simulation results verify that the proposed WCF algorithm is better than the Weighted Trust Evaluation (WTE) in terms of the detection ratio and the false alarm ratio. More specifically, with the WCF, the detection ratio is significantly improved and the false alarm ratio is observably reduced, especially when the malicious node ratio is 0.25 or greater. When 40% of 100 sensors are malicious, the detection accuracy is above 90% and the false alarm ratio is nearly only 1.8%. 展开更多
关键词 sensor networks malicious nodes ATTACK CONFIDENCE DETECTION sirrlation
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部