Laser cladding of powder mixture of TiN and SS304 is carried out on an SS304 substrate with the help of fibre laser.The experiments are performed on SS304,as per the Taguchi orthogonal array(L^(16))by different combin...Laser cladding of powder mixture of TiN and SS304 is carried out on an SS304 substrate with the help of fibre laser.The experiments are performed on SS304,as per the Taguchi orthogonal array(L^(16))by different combinations of controllable parameters(microhardness and clad thickness).The microhardness and clad thickness are recorded at all the experimental runs and studied using Taguchi S/N ratio and the optimum controllable parametric combination is obtained.However,an artificial neural network(ANN)identifies different sets of optimal combinations from Taguchi method but they both got almost the same clad thickness and hardness values.The micro-hardness of cladded layer is found to be6.22 times(HV_(0.5)752)the SS304 hardness(HV_(0.5)121).The presence of nitride ceramics results in a higher micro hardness.The cladded surface is free from cracks and pores.The average clad thickness is found to be around 0.6 mm.展开更多
Delay,as an inevitable real-world phenomenon,is usually ignored in transport network design.A model of urban hybrid transport system with stochastic delay was created on the basis of the idealized public transport sys...Delay,as an inevitable real-world phenomenon,is usually ignored in transport network design.A model of urban hybrid transport system with stochastic delay was created on the basis of the idealized public transport system design.After formulating the total trip time cost composed of accessing time in the sub-region of the city,waiting time at the public transport station,and in-vehicle time in the public transit network,the analytical properties of the total trip time cost function were investigated.The results show that in the urban hybrid transport network design,the total trip time cost reaches its approximate minimum in a δ-neighbourhood of buffer time of 1.5 min,and that through modelling optimal delay in hybrid transport system,the maximal synchronization can be achieved and operational efficiency and passenger satisfaction can be improved.The proposed modelling and analytical investigations are attempts to contribute to more realistic modelling of future idealized public transport system that involves more practical constraints.展开更多
The traditional manner to design public transportation system is to sequentially design the transit network and public bicycle network. A new public transportation system design problem that simultaneously considers b...The traditional manner to design public transportation system is to sequentially design the transit network and public bicycle network. A new public transportation system design problem that simultaneously considers both bus network design and public bicycle network design is proposed. The chemical reaction optimization(CRO) is designed to solve the problem. A shortcoming of CRO is that, when the two-molecule collisions take place, the molecules are randomly picked from the container.Hence, we improve CRO by employing different mating strategies. The computational results confirm the benefits of the mating strategies. Numerical experiments are conducted on the Sioux-Falls network. A comparison with the traditional sequential modeling framework indicates that the proposed approach has a better performance and is more robust. The practical applicability of the approach is proved by employing a real size network.展开更多
This work considers those road networks in which there are multi-route choices for bifurcation-destination(or origin-destination) pairs, and designs a real-time variable message sign(VMS)-based routing control strateg...This work considers those road networks in which there are multi-route choices for bifurcation-destination(or origin-destination) pairs, and designs a real-time variable message sign(VMS)-based routing control strategy in the model predictive control(MPC) framework. The VMS route recommendation provided by the traffic management authority is directly considered as the control variable, and the routing control model is established, in which a multi-dimensional control vector is introduced to describe the influence of route recommendations on flow distribution. In the MPC framework, a system optimum routing strategy with the constraints regarding drivers' acceptability with recommended routes is designed, which can not only meet the traffic management authority's control requirement but also improve drivers' satisfaction with the route guidance system. The simulation carried out shows that the proposed routing control can effectively mitigate traffic congestion, reduces followers' time delay, and improves drivers' satisfaction with routing control in road networks.展开更多
文摘Laser cladding of powder mixture of TiN and SS304 is carried out on an SS304 substrate with the help of fibre laser.The experiments are performed on SS304,as per the Taguchi orthogonal array(L^(16))by different combinations of controllable parameters(microhardness and clad thickness).The microhardness and clad thickness are recorded at all the experimental runs and studied using Taguchi S/N ratio and the optimum controllable parametric combination is obtained.However,an artificial neural network(ANN)identifies different sets of optimal combinations from Taguchi method but they both got almost the same clad thickness and hardness values.The micro-hardness of cladded layer is found to be6.22 times(HV_(0.5)752)the SS304 hardness(HV_(0.5)121).The presence of nitride ceramics results in a higher micro hardness.The cladded surface is free from cracks and pores.The average clad thickness is found to be around 0.6 mm.
基金Project(70671008)supported by the National Natural Science Foundation of ChinaProject(3340-74236000003)supported by the Scientific Research Innovation Fund Project for Graduate Student of Hunan Province,China
文摘Delay,as an inevitable real-world phenomenon,is usually ignored in transport network design.A model of urban hybrid transport system with stochastic delay was created on the basis of the idealized public transport system design.After formulating the total trip time cost composed of accessing time in the sub-region of the city,waiting time at the public transport station,and in-vehicle time in the public transit network,the analytical properties of the total trip time cost function were investigated.The results show that in the urban hybrid transport network design,the total trip time cost reaches its approximate minimum in a δ-neighbourhood of buffer time of 1.5 min,and that through modelling optimal delay in hybrid transport system,the maximal synchronization can be achieved and operational efficiency and passenger satisfaction can be improved.The proposed modelling and analytical investigations are attempts to contribute to more realistic modelling of future idealized public transport system that involves more practical constraints.
基金Projects(71301115,71271150,71101102)supported by the National Natural Science Foundation of ChinaProject(20130032120009)supported by Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘The traditional manner to design public transportation system is to sequentially design the transit network and public bicycle network. A new public transportation system design problem that simultaneously considers both bus network design and public bicycle network design is proposed. The chemical reaction optimization(CRO) is designed to solve the problem. A shortcoming of CRO is that, when the two-molecule collisions take place, the molecules are randomly picked from the container.Hence, we improve CRO by employing different mating strategies. The computational results confirm the benefits of the mating strategies. Numerical experiments are conducted on the Sioux-Falls network. A comparison with the traditional sequential modeling framework indicates that the proposed approach has a better performance and is more robust. The practical applicability of the approach is proved by employing a real size network.
基金Projects(61304203,51409157)supported by the National Natural Science Foundation of ChinaProject(12ZR1444800)supported by the Natural Science Foundation of Shanghai,China
文摘This work considers those road networks in which there are multi-route choices for bifurcation-destination(or origin-destination) pairs, and designs a real-time variable message sign(VMS)-based routing control strategy in the model predictive control(MPC) framework. The VMS route recommendation provided by the traffic management authority is directly considered as the control variable, and the routing control model is established, in which a multi-dimensional control vector is introduced to describe the influence of route recommendations on flow distribution. In the MPC framework, a system optimum routing strategy with the constraints regarding drivers' acceptability with recommended routes is designed, which can not only meet the traffic management authority's control requirement but also improve drivers' satisfaction with the route guidance system. The simulation carried out shows that the proposed routing control can effectively mitigate traffic congestion, reduces followers' time delay, and improves drivers' satisfaction with routing control in road networks.
