期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
纳米二氧化钛粉末的研制 被引量:26
1
作者 段学臣 高桂兰 +1 位作者 吴湘伟 杨向萍 《稀有金属与硬质合金》 CAS CSCD 2002年第4期17-30,共14页
采用水解与均匀沉淀法相结合,制备了锐钛型纳米TiO2粉末,并研究了其制备的最佳条件。利用相关分析测试技术,对粉末粒子的形貌、大小、晶型和比表面积进行了表征。用此制备工艺新技术,成本低,操作简单,易于实现工业化,所得纳米TiO2粉末... 采用水解与均匀沉淀法相结合,制备了锐钛型纳米TiO2粉末,并研究了其制备的最佳条件。利用相关分析测试技术,对粉末粒子的形貌、大小、晶型和比表面积进行了表征。用此制备工艺新技术,成本低,操作简单,易于实现工业化,所得纳米TiO2粉末呈球形,平均粒径为20nm,能满足市场需要。 展开更多
关键词 纳米二氧化钛粉末 研制 水解 均匀沉淀法
在线阅读 下载PDF
纳米二氧化钛粉末的溶胶-凝胶法合成及晶相转化 被引量:40
2
作者 吴腊英 李长江 《无机化学学报》 SCIE CAS CSCD 北大核心 2002年第4期399-403,共5页
Nanosized TiO2 powder with anatase and rutile structures was synthesized by a sol gel method using TiCl4 ethanol solution as a precursor.The grain size ofTiO2 powder was about 63nm after the precursor was calcined at ... Nanosized TiO2 powder with anatase and rutile structures was synthesized by a sol gel method using TiCl4 ethanol solution as a precursor.The grain size ofTiO2 powder was about 63nm after the precursor was calcined at 600℃for 2 hours .The experimental techniques of XRD,TEM and Particle Distribution were used to characterize the synthesized specimens. Various special effects were investigated for their contribution to crystal structure and the size of TiO2 powder .Theformation of anatase as well as the rutile phase of TiO2 was indicted from the XRD when the reaction temperature was above 30℃and when the sol was irradiated by infrared rays .However, an anatase TiO2 powder formed after the heat treatment of the dried gel in a temperature range from 300℃to 500℃.Under the vacuum drying and with the calcined time below 3hours ,the anatase phase was gained .As well as with the increase of gelatinizing time, the anatase TiO2 powder was obtained. 展开更多
关键词 溶胶-凝胶 锐钛矿 金红石 合成 晶相转化 纳米二氧化钛粉末 化合物半导体
在线阅读 下载PDF
Sol-Gel法制备纳米二氧化钛凝胶的工艺优化 被引量:24
3
作者 陈建军 陈晓春 +3 位作者 李庆余 李吉力 刘业翔 陈汉东 《中国有色金属学报》 EI CAS CSCD 北大核心 2000年第S1期84-87,共4页
以钛酸丁酯为前驱物、无水乙醇为溶剂 ,在不同反应条件下研究了Sol Gel法制备纳米二氧化钛光催化剂的胶凝过程。得到了制备稳定溶胶的最佳工艺条件 :前驱物水解是在混合水溶液中进行 ,其混合液由无水乙醇、水和 pH调节剂 (HCl或NH3·... 以钛酸丁酯为前驱物、无水乙醇为溶剂 ,在不同反应条件下研究了Sol Gel法制备纳米二氧化钛光催化剂的胶凝过程。得到了制备稳定溶胶的最佳工艺条件 :前驱物水解是在混合水溶液中进行 ,其混合液由无水乙醇、水和 pH调节剂 (HCl或NH3·H2 O)组成 ,并采用滴加式加入 ;钛醇盐与水的摩尔比取 2~ 3;乙醇与钛醇盐摩尔比m取 5~ 8;pH值取 1~ 2 ;水解温度为 2 0~ 40℃。 展开更多
关键词 光催化 纳米二氧化钛粉末 胶凝
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部