期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
高温蒸汽灭菌器温度压强测量系统 被引量:1
1
作者 郭庆 周嘉奉 +1 位作者 许金 徐翠锋 《传感器与微系统》 CSCD 2016年第4期82-85,共4页
设计了一种使用超声波信号通信的高温蒸汽灭菌器温度压强测量系统。系统利用超声波信号在刚体介质中的强穿透性穿透灭菌器金属壁。通过40 k Hz与1 MHz两种频率信号代表不同数据位完成信息的传递。系统以STM32F103为控制器,通过外围电路... 设计了一种使用超声波信号通信的高温蒸汽灭菌器温度压强测量系统。系统利用超声波信号在刚体介质中的强穿透性穿透灭菌器金属壁。通过40 k Hz与1 MHz两种频率信号代表不同数据位完成信息的传递。系统以STM32F103为控制器,通过外围电路驱动超声波换能器激发超声波,从而使外部换能器振动完成通信。介绍了误码处理算法与系统硬件构成。经测试,系统温度测量误差小于0.1℃,压强测量误差小于0.1%FS。 展开更多
关键词 温度压强测量系统 高温蒸汽灭菌器 超声波通信
在线阅读 下载PDF
一种非接触式光学微腔液压测量系统 被引量:1
2
作者 魏鹤鸣 侯林嵩 +2 位作者 丁武成 殷瑞雪 任冬妮 《电子测量技术》 北大核心 2024年第7期42-48,共7页
为满足在狭小腔室中测量液体压强的需求,设计了一种非接触式光学法布里珀罗微腔液压测量系统,其中,光学微腔采用双光子三维打印技术制备,膜结构尺寸仅为350μm,设计的膜厚分别为4μm和6μm。系统主要采用嵌入式设计与衍射光栅光谱模块互... 为满足在狭小腔室中测量液体压强的需求,设计了一种非接触式光学法布里珀罗微腔液压测量系统,其中,光学微腔采用双光子三维打印技术制备,膜结构尺寸仅为350μm,设计的膜厚分别为4μm和6μm。系统主要采用嵌入式设计与衍射光栅光谱模块互联,实时采集光学微腔干涉光谱信号,实现了高精度光谱动态解调。实验结果表明,室温(25℃)下,4μm膜厚的微腔液压灵敏度高达398 pm/kPa,系统分辨率可达35.5 Pa,重复性较好,有望用于生物医学眼压等应用场景。 展开更多
关键词 微腔压力传感 双光子三维打印技术 非接触式光学传感 液体压强测量系统
在线阅读 下载PDF
压力传感器圆片激光焊接系统设计 被引量:1
3
作者 王政 王军 《激光杂志》 北大核心 2015年第12期108-110,共3页
针对压力传感器的密封焊接,设计了整套激光焊接系统,主要由焊接头组件、上下料组件、下驱动组件及定位夹具等几部分组成。实现快速上料,取料,自动定位及激光焊接,节约了生产成本并且提高了生产效率。经检测,该激光焊接系统焊接的传感器... 针对压力传感器的密封焊接,设计了整套激光焊接系统,主要由焊接头组件、上下料组件、下驱动组件及定位夹具等几部分组成。实现快速上料,取料,自动定位及激光焊接,节约了生产成本并且提高了生产效率。经检测,该激光焊接系统焊接的传感器抗压强度达到3MPa,满足实际生产需求。 展开更多
关键词 传感器 激光焊接 系统设计 压强
在线阅读 下载PDF
金刚石薄膜在氧化铝陶瓷上低压成核 被引量:6
4
作者 王志明 夏义本 +5 位作者 杨莹 方志军 王林军 居建华 范轶敏 张伟丽 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2002年第4期765-770,共6页
在微波等离子体化学气相沉积(MPCVD)系统中,用低压成核方法,在氧化铝陶瓷基片上获得了高成核密度的金刚石薄膜.实验表明,金刚石成核密度随系统压强减小而提高.在此基础上,提出一种MPCVD系统中金刚石成核的动力学模型,并指出对应于最... 在微波等离子体化学气相沉积(MPCVD)系统中,用低压成核方法,在氧化铝陶瓷基片上获得了高成核密度的金刚石薄膜.实验表明,金刚石成核密度随系统压强减小而提高.在此基础上,提出一种MPCVD系统中金刚石成核的动力学模型,并指出对应于最高成核密度有一临界压强存在. 展开更多
关键词 金刚石薄膜 MPCVD 氧化铝陶瓷 系统压强 成核 化学气相沉积 集成电路 基片 动力学
在线阅读 下载PDF
Strengthening pelletization of manganese ore fines containing high combined water by high pressure roll grinding and optimized temperature elevation system 被引量:5
5
作者 朱德庆 余为 +1 位作者 周仙霖 潘建 《Journal of Central South University》 SCIE EI CAS 2014年第9期3485-3491,共7页
Pelletization is one of useful processes for the agglomeration of iron ore or concentrates. However, manganese ore fines are mainly agglomerated by sintering due to its high combined water which adversely affects the ... Pelletization is one of useful processes for the agglomeration of iron ore or concentrates. However, manganese ore fines are mainly agglomerated by sintering due to its high combined water which adversely affects the roasting performance of pellets. In this work, high pressure roll grinding(HPRG) process and optimization of temperature elevation system were investigated to improve the strength of fired manganese ore pellets. It is shown that the manganese ore possesses good ballability after being pretreated by HPRG twice, and good green balls were produced under the conditions of blending 2.0% bentonite in the feed, balling for 7 min at 16.00% moisture. High quality roasted pellets with the compressive strength of 2711 N per pellet were manufactured through preheating at 1050 °C for 10 min and firing at 1335 °C for 15 min by controlling the cracks formation. The fired manganese pellets keep the strength by the solid interconnection of recrystallized pyrolusite grains and the binding of manganite liquid phase which filled the pores and clearance among minerals. The product pellets contain high Mn grade and low impurities, and can be used to smelt ferromanganese, which provides a possible way to use imported manganese ore fines containing high combined water to produce high value ferromanganese. 展开更多
关键词 manganese ore fines containing high combined water PELLETIZATION high pressure roll grinding optimized temperatureelevation system consolidation mechanism
在线阅读 下载PDF
Neuro-fuzzy systems in determining light weight concrete strength
6
作者 Seyed Vahid RAZAVI TOSEE Mehdi NIKOO 《Journal of Central South University》 SCIE EI CAS CSCD 2019年第10期2906-2914,共9页
The adaptive neuro-fuzzy inference systems(ANFIS)are widely used in the concrete technology.In this research,the compressive strength of light weight concrete was determined.To this end,the scoria percentage and curin... The adaptive neuro-fuzzy inference systems(ANFIS)are widely used in the concrete technology.In this research,the compressive strength of light weight concrete was determined.To this end,the scoria percentage and curing day variables were used as the input parameters,and compressive strength and tensile strength were used as the output parameters.In addition,100 patterns were used,70%of which were used for training and 30%were used for testing.To assess the precision of the neuro-fuzzy system,it was compared using two linear regression models.The comparisons were carried out in the training and testing phases.Research results revealed that the neuro-fuzzy systems model offers more potential,flexibility,and precision than the statistical models. 展开更多
关键词 neuro-fuzzy systems compressive strength light weight concrete linear regression model
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部