The influence of different features of natural soft clays,namely anisotropy,destructuration and viscosity,on modelling the time-dependent behaviour of Murro embankment was investigated.The newly developed elasto-visco...The influence of different features of natural soft clays,namely anisotropy,destructuration and viscosity,on modelling the time-dependent behaviour of Murro embankment was investigated.The newly developed elasto-viscoplastic models were enhanced for determining viscosity parameters in a straightforward way and adopted for the finite element analysis.The same set of common parameters determined from conventional triaxial and oedometer tests was employed for all models,with additional parameters required for representing different soil features.The finite element predictions by using models coupled with BIOT's consolidation theory were compared with each other and with field data for settlement,horizontal displacement and excess pore pressures.In addition,the stress paths under the embankment loading were also compared with each other to improve the understanding of the effect of different soil features.All simulations demonstrate that all three features significantly influence the predictions.As a consequence,accounting for soil features needs to be carefully considered when they are applied to a construction site.展开更多
In order to describe the three-stage creep behavior of compressed asphalt mastic, a visco-elastoplastic damage constitutive model is proposed in this work. The model parameters are treated as quadratic polynomial func...In order to describe the three-stage creep behavior of compressed asphalt mastic, a visco-elastoplastic damage constitutive model is proposed in this work. The model parameters are treated as quadratic polynomial functions with respect to stress and temperature. A series of uniaxial compressive creep experiments are performed at various stress and temperature conditions in order to determine these parameter functions, and then the proposed model is validated by comparison between the predictions and experiments at the other loading conditions. It is shown that very small permanent deformation at low stress and temperature increases rapidly with elevated stress or temperature and the damage may initiate in the stationary stage but mainly develops in the accelerated stage. Compared with the visco-elastoplastic models without damage, the predictions from the proposed model is in better agreement with the experiments, and can better capture the rate-dependency in creep responses of asphalt mastic especially below its softening point of 47 ℃展开更多
This work focuses on the uniqueness of rate-dependency, creep and stress relaxation behaviors for soft clays under one-dimensional condition. An elasto-viscoplastic model is briefly introduced based on the rate-depend...This work focuses on the uniqueness of rate-dependency, creep and stress relaxation behaviors for soft clays under one-dimensional condition. An elasto-viscoplastic model is briefly introduced based on the rate-dependency of preconsolidation pressure. By comparing the rate-dependency formulation with the creep based formulation, the relationship between rate-dependency and creep behaviors is firstly described. The rate-dependency based formulation is then extended to derive an analytical solution for the stress relaxation behavior with defining a stress relaxation coefficient. Based on this, the relationship between the rate-dependency coefficient and the stress relaxation coefficient is derived. Therefore, the uniqueness between behaviors of rate-dependency, creep and stress relaxation with their key parameters is obtained. The uniqueness is finally validated by comparing the simulated rate-dependency of preconsolidation pressure, the estimated values of secondary compression coefficient and simulations of stress relaxation tests with test results on both reconstituted Illite and Berthierville clay.展开更多
基金Project(11PJ1405700) supported by Pujiang Talent Plan of Shanghai,ChinaProject(41002091) supported by the National Natural Science Foundation of ChinaProject(PIAP-GA-2009-230638) supported by the European Community through the Program "People"
文摘The influence of different features of natural soft clays,namely anisotropy,destructuration and viscosity,on modelling the time-dependent behaviour of Murro embankment was investigated.The newly developed elasto-viscoplastic models were enhanced for determining viscosity parameters in a straightforward way and adopted for the finite element analysis.The same set of common parameters determined from conventional triaxial and oedometer tests was employed for all models,with additional parameters required for representing different soil features.The finite element predictions by using models coupled with BIOT's consolidation theory were compared with each other and with field data for settlement,horizontal displacement and excess pore pressures.In addition,the stress paths under the embankment loading were also compared with each other to improve the understanding of the effect of different soil features.All simulations demonstrate that all three features significantly influence the predictions.As a consequence,accounting for soil features needs to be carefully considered when they are applied to a construction site.
基金Project(2011CB013800)supported by the National Basic Research Program of ChinaProject(10672063)supported by the National Natural Science Foundation of ChinaProject(Y201119)supported by the Hubei Province Key Laboratory of Systems Science in Metallurgical Process,China
文摘In order to describe the three-stage creep behavior of compressed asphalt mastic, a visco-elastoplastic damage constitutive model is proposed in this work. The model parameters are treated as quadratic polynomial functions with respect to stress and temperature. A series of uniaxial compressive creep experiments are performed at various stress and temperature conditions in order to determine these parameter functions, and then the proposed model is validated by comparison between the predictions and experiments at the other loading conditions. It is shown that very small permanent deformation at low stress and temperature increases rapidly with elevated stress or temperature and the damage may initiate in the stationary stage but mainly develops in the accelerated stage. Compared with the visco-elastoplastic models without damage, the predictions from the proposed model is in better agreement with the experiments, and can better capture the rate-dependency in creep responses of asphalt mastic especially below its softening point of 47 ℃
基金Projects(41372285,41272317,51278449,51238009)supported by the National Natural Science Foundation of ChinaProject(20110073120012)supported by Research Fund for the Doctoral Program of Higher Education of ChinaProject(PIAPP-GA2011-286397)supported by the European Program CREEP
文摘This work focuses on the uniqueness of rate-dependency, creep and stress relaxation behaviors for soft clays under one-dimensional condition. An elasto-viscoplastic model is briefly introduced based on the rate-dependency of preconsolidation pressure. By comparing the rate-dependency formulation with the creep based formulation, the relationship between rate-dependency and creep behaviors is firstly described. The rate-dependency based formulation is then extended to derive an analytical solution for the stress relaxation behavior with defining a stress relaxation coefficient. Based on this, the relationship between the rate-dependency coefficient and the stress relaxation coefficient is derived. Therefore, the uniqueness between behaviors of rate-dependency, creep and stress relaxation with their key parameters is obtained. The uniqueness is finally validated by comparing the simulated rate-dependency of preconsolidation pressure, the estimated values of secondary compression coefficient and simulations of stress relaxation tests with test results on both reconstituted Illite and Berthierville clay.
